Cooperative Acid–Base Effects with Functionalized Mesoporous Silica Nanoparticles: Applications in Carbon–Carbon Bond‐Formation Reactions

Acid–base bifunctional mesoporous silica nanoparticles (MSN) were prepared by a one‐step synthesis by co‐condensation of tetraethoxysilane (TEOS) and silanes possessing amino and/or sulfonic acid groups. Both the functionality and morphology of the particles can be controlled. The grafted functional groups were characterized by using solid‐state ²⁹Si and ¹³C cross‐polarization/magic angle spinning (CP/MAS) NMR spectroscopy, thermal analysis, and elemental analysis, whereas the structural and the morphological features of the materials were evaluated by using XRD and N₂ adsorption–desorption analyses, and SEM imaging. The catalytic activities of the mono‐ and bifunctional mesoporous hybrid materials were evaluated in carbon–carbon coupling reactions like the nitroaldol reaction and the one‐pot deacetalization–nitroaldol and deacetalization–aldol reactions. Among all the catalysts evaluated, the bifunctional sample containing amine and sulfonic acid groups (MSN–NNH₂–SO₃H) showed excellent catalytic activity, whereas the homogeneous catalysts were unable to initiate the reaction due to their mutual neutralization in solution. Therefore a cooperative acid–base activation is envisaged for the carbon–carbon coupling reactions.     

Nanoscale organization of thiol and arylsulfonic acid on silica leads to a highly active and selective bifunctional, heterogeneous catalyst

Ordered mesoporous silicas functionalized with alkylsulfonic acid and thiol group pairs have been shown to catalyze the synthesis of bisphenols from the condensation of phenol and various ketones, with activity and selectivity highly dependent on the distance between the acid and thiol. Here, a new route to thiol/sulfonic acid paired catalysts is reported. A bis-silane precursor molecule containing both a disulfide and a sulfonate ester bond is grafted onto the surface of ordered mesoporous silica, SBA-15, followed by simultaneous disulfide reduction and sulfonate ester hydrolysis. The resulting catalyst, containing organized pairs of arylsulfonic acid and thiol groups, is significantly more active than the alkylsulfonic acid/thiol paired catalyst in the synthesis of bisphenol A and Z, and this increase in activity does not lead to a loss of regioselectivity. The paired catalyst has activity similar to that of a randomly bifunctionalized arylsulfonic acid/thiol catalyst in the bisphenol A reaction but exhibits greater activity and selectivity than the randomly bifunctionalized catalyst in the bisphenol Z reaction.     

Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

An extensive study has been made on a series of multifunctional mesoporous silica materials, prepared by introducing two different organoalkoxysilanes, namely 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEPTMS) and 3-cyanopropyltriethoxysilane (CPTES) during the base-catalyzed condensation of tetraethoxysilane (TEOS), using the variable-temperature (VT) hyperpolarized (HP) 129Xe NMR technique. VT HP-129Xe NMR chemical shift measurements of adsorbed xenon revealed that surface properties as well as functionality of these AEP/CP-functionalized microparticles (MP) could be controlled by varying the AEPTMS/CPTES ratio in the starting solution during synthesis. Additional chemical shift contribution due to Xe-moiety interactions was observed for monofunctional AEP-MP and CP-MP as well as for bifunctional AEP/CP-MP samples. In particular, unlike CP-MP that has a shorter organic backbone on the silica surface, the amino groups in the AEP chain tends to interact with the silanol groups on the silica surface causing backbone bending and hence formation of secondary pores in AEP-MP, as indicated by additional shoulder peak at lower field in the room-temperature 129Xe NMR spectrum. The exchange processes of xenon in different adsorption regions were also verified by 2D EXSY HP-129Xe NMR spectroscopy. It is also found that subsequent removal of functional moieties by calcination treatment tends to result in a more severe surface roughness on the pore walls in bifunctional samples compared to monofunctional ones. The effect of hydrophobicity/hydrophilicity of the organoalkoxysilanes on the formation, pore structure and surface property of these functionalized mesoporous silica materials are also discussed.     

Comparison of nitroaldol reaction mechanisms using accurate ab initio calculations

In the nitroaldol reaction, condensation between a nitroalkane and an aldehyde yields a nitroalcohol that can undergo dehydration to yield a nitroalkene. Amine-functionalized, MCM-41-type mesoporous silica nanosphere (MSN) materials have been shown to selectively catalyze this reaction. Gas-phase reaction paths for the several competing mechanisms for the nitroaldol reaction have been mapped out using second-order perturbation theory (MP2). Improved relative energies were determined using singles and doubles coupled cluster theory with perturbative triples, CCSD(T). The mechanism in the absence of a catalyst was used to provide a baseline against which to assess the impact of the catalyst on both the mechanism and the related energetics. Catalyzed mechanisms can either pass through a nitroalcohol intermediate as in the classical mechanism or an imine intermediate.     

Direct synthesis of acid-base bifunctionalized hexagonal mesoporous silica and its catalytic activity in cascade reactions

A series of efficient acid-base bifunctionalized hexagonal mesoporous silica (HMS) catalysts contained aminopropyl and propanesulfonic acid have been synthesized through a simple co-condensation by protection of amino group. The results of small-angle XRD, TEM, and N(2) adsorption-desorption measurements show that the resultant materials have mesoscopic structures. X-ray photoelectron spectroscopies, elemental analysis (EA), back titration, (29)Si NMR and (13)C NMR confirm that the organosiloxanes were condensed as a part of the silica framework. The resultant catalysts exhibit excellent acid-basic properties, which make them possess high activity for one-pot deacetalization-Knoevenagel and deacetalization-nitroaldol (Henry) reactions.     

具有可控分散性的不同粒径氨基酸双功能化介孔二氧化硅纳米颗粒

通过表面活性剂,共结构导向剂（CSDAs）和硅源的自组装合成了具有分散性的不同粒径氨基酸双功能化介孔二氧化硅纳米颗粒. 通过表面活性剂头部与带相反电荷的CSDAs之间的静电相互作用使氨基和羧基基团均匀排列在介孔孔道表面. 通过调节助溶剂或分散剂的加入量来控制颗粒粒径,调节合成溶液pH改变纳米颗粒表面羧基和氨基基团的电荷切换性及其量来控制颗粒的分散性.     

Fabrication and sustained release properties of porous hollow silica nanoparticles

MCM-41-type mesoporous silica nanospheres(MSN) have been prepared using n-cetyltrimethylammonium bromide(CTAB) as a soft template.The pseudo-moire' rotational pattern inside the MSN results in many interior defects.Hollow mesoporous silica(HMS) spheres were synthesized by solvent extraction of the template from MSN.The morphology and structure of MSN and HMS were studied by TEM,XRD and nitrogen sorption techniques.A model drug,bromocresol green dye,was packed inside different regions of HMS through impregna...     

Novel synthesis of bifunctional catalysts with different microenvironments

Acid-base bifunctional activity governed by -NH(2) group's microenvironment is evident from two different catalysts scrutinized by interchanging the location of -SO(3)H/NH(2) groups on periodic mesoporous ethylenesilica. The hydrophobic local environment plays a significant role in one-pot deacetalization/nitroaldol condensation.     

Fine-tuning the degree of organic functionalization of mesoporous silica nanosphere materials via an interfacially designed co-condensation method

A synthetic method that can fine tune the amount of chemically accessible organic functional groups on the pore surface of MCM-41 type mesoporous silica nanosphere (MSN) materials has been developed by electrostatically matching various anionic organoalkoxysilanes with the cationic cetyltrimethylammonium bromide micelles in a base-catalyzed condensation reaction of tetraethoxysilane.     

Encapsulated ultrafine and highly dispersed molybdenum dioxide nanoparticles in hollow mesoporous silica spheres as an efficient epoxidation catalyst for alkenes

A facile post-synthetic strategy was developed to functionalize the preformed hollow mesoporous silica spheres by encapsulating the molybdenum dioxide (MoO₂) nanoparticles inside the interior cavity. Hollow mesoporous silica spheres were prepared and employed as carriers, and the encapsulation of MoO₂ nanoparticles was achieved through a one-pot hydrothermal protocol. After characterization, the encapsulated MoO₂ nanoparticles were certified to be ultrafine and highly dispersed, which greatly promoted the catalytic activity. The as-prepared catalysts were utilized in epoxidation of alkenes and exhibited as a promising catalyst in this reaction. After reacting for 10 h, the optimal catalyst MoO₂@SiO₂-1 achieved a conversion above 95% and selectivity above 95%, respectively. Moreover, the catalysts also exhibited good reusability, conversion of 78% and selectivity of 89% (reaction time 4 h) were still obtained after recycling for 5 times. Meanwhile, the employed facial and efficient hydrothermal approach could be expanded to other molybdenum modified heterogeneous catalysts in various applications.     

Direct synthesis of amino-functionalized monodispersed mesoporous silica spheres and their catalytic activity for nitroaldol condensation

New amino-functionalized monodispersed mesoporous silica spheres (MMSS) were synthesized directly by co-condensation of 3-aminopropyltrimethoxysilane (AP-TMS), [3-(2-aminoethylamino)propyl]trimethoxysilane (AEAP-TMS) or 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEAEAP-TMS) with tetramethoxysilane. By changing the methanol ratio or adding extra silica source, amino-functionalized MMSS with different particle diameter (310–780 nm) and the same mesopore size were successfully synthesized. TEM observations revealed that the mesopores were aligned radially from the center towards the outside of the spheres even in the amino-functionalized MMSS. The effect of particle diameter on base catalytic activity was investigated using the amino-functionalized MMSS. In addition, the amino-functionalized MMSS were found to be excellent base catalysts in the nitroaldol condensation reactions. The effectiveness factor was evaluated to be 0.8–0.82 and improved substantially compared with MMSS prepared by grafting method.     

Preferential oxidation of carbon monoxide catalyzed by platinum nanoparticles in mesoporous silica

Preferential oxidation (PROX) of CO is an important practical process to purify H2 for use in polymer electrolyte fuel cells. Although many supported noble metal catalysts have been reported so far, their catalytic performances remain insufficient for operation at low temperature. We found that Pt nanoparticles in mesoporous silica give unprecedented activity, selectivity, and durability in the PROX reaction below 353 K. We also studied the promotional effect of mesoporous silica in the Pt-catalyzed PROX reaction by infrared spectroscopy using the isotopic tracer technique. Gas-phase O2 is not directly used for CO oxidation, but the oxygen of mesoporous silica is incorporated into CO2. These results suggest that CO oxidation is promoted by the attack of the surface OH groups to CO on Pt without forming water.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

Effect of ligand structure on the zinc-catalyzed Henry reaction. Asymmetric syntheses of (-)-denopamine and (-)-arbutamine

[reaction: see text] Syntheses of variously modified ligands for the dinuclear zinc catalysts for the asymmetric aldol and nitroaldol (Henry) reactions are reported. Catalytic enantioselective nitroaldol reactions promoted by these modified ligands led to efficient syntheses of the beta-receptor agonists (-)-denopamine and (-)-arbutamine.     

Preparation and synergetic catalytic effects of amino-functionalized MCM-41 catalysts

Four amine functionalized mesoporous catalysts were synthesized by grafting primary, dualistic and two secondary amines onto the channel walls of mesoporous silica, MCM-41. We examined the effects of organoamine loading amount on the acid-base synergism of the catalysts in the self-condensation reaction of n-butanal, a Knoevenagel condensation and a Henry reaction. We observed the balance of the amine and residual silanol amounts is crucial to the catalytic performances of the functionalized mesoporous catalysts. An optimum organoamine loading amount exists, which is dependent on the organoamine type. There is little difference in the optimum organoamine loading amount between different reactions. The secondary organoamine functionalized MCM-41 exhibits the best catalytic performance in the experimental range.     

Periodic Mesoporous Organosilicas: A Type of Hybrid Support for Water‐Mediated Reactions

Hybrid mesoporous periodic organosilicas (Ph‐PMOs) with phenylene moieties embedded inside the silica matrix were used as a heterogeneous catalyst for the Ullmann coupling reaction in water. XRD, N₂ sorption, TEM, and solid‐state NMR spectroscopy reveal that mesoporous Ph‐PMO supports and Pd/Ph‐PMO catalysts have highly ordered 2D hexagonal mesostructures and covalently bonded organic–inorganic (all Si atoms bonded with carbon) hybrid frameworks. In the Ullmann coupling reaction of iodobenzene in water, the yield of biphenyl was 94 %, 34 %, 74 % and for palladium‐supported Ph‐PMO, pure silica (MCM‐41), and phenyl‐group‐modified Ph‐MCM‐41 catalysts, respectively. The selectivity toward biphenyl reached 91 % for the coupling of boromobenzene on the Pd/Ph‐PMO catalyst. This value is much higher than that for Pd/Ph‐MCM‐41 (19 %) and Pd/MCM‐41 (0 %), although the conversion of bromobenzene for these two catalysts is similar to that for Pd/Ph‐PMO. The large difference in selectivity can be attributed to surface hydrophobicity, which was evaluated by the adsorption isotherms of water and toluene. Ph‐PMO has the most hydrophobic surface, and in turn selectively adsorbs the reactant haloaryls from aqueous solution. Water transfer inside the mesochannels is thus restricted, and the coupling reaction of bromobenzene is improved.     

One-pot cascade deacetalization and nitroaldol condensation over acid–base bifunctional ZIF-8 catalyst

Designing an elegant cascade catalyst is one of the challenging issues in catalyst research because the different or sometimes antagonistic active sites should catalyze the reaction in a consecutive manner without any adverse effects. In particular, complex synthetic methods have been envisaged to avoid unfavorable neutralization between acid and base sites in the preparation of acid–base bifunctional catalysts. In this work, acid–base bifunctional catalytic activity of ZIF-8 was evaluated for one-pot cascade deacetalization and nitroaldol condensation, and the reaction performance was compared with those of other metal–organic framework (MOF) catalysts. Although MOFs bearing strong Lewis acid sites on their metal nodes efficiently promoted the first deacetalization step, they were either totally ineffective (Cu-BTC, Fe-BTC, and MIL-53) or unsatisfactory (MIL-101 and UiO-66) to produce final product in the second base-catalyzed reaction step. On the other hand, ZIF-8 was more efficient at catalyzing the second nitroaldol condensation step, and the selectivity of the final product was substantially improved to as high as 56.4%. The enhanced selectivity clearly demonstrates the promising potential of ZIF-8 as a site-isolated acid–base bifunctional catalyst. However, the gradual catalyst deactivation, resulting from weakening of both acid and base sites during a reaction revealed by characterization of used catalyst, should be improved to extend its use to other versatile cascade or tandem reactions.     

一种新型介孔空腔二氧化硅纳米微球的制备与缓释行为

本文用十六烷基三甲基溴化铵(CTAB)作为试剂,通过软模板法合成介孔二氧化硅,利用在合成过程中,由伪莫尔转动所引起的微粒内部的大量缺陷,通过溶剂抽提,形成了具有空腔结构的介孔二氧化硅纳米微球.采用透射电子显微镜(TEM)、X射线粉末衍射仪(XRD)、N2吸附-脱附等手段对产物的形貌和结构进行了详细的表征.并以溴甲酚绿作为目标物,通过改变压强和温度,调节溴甲酚绿进入空心SiO2微球中的不同部位,对所制备的空腔介孔二氧化硅微球进行染料的装载和释放试验.结果显示该微球腔壁具有可渗透性和缓释性,而且在负压蒸发溶剂的情况下可以得到较高的药物负载量和极大地提高缓释性能.     

A novel chiral mesoporous binaphthyl-silicas: Preparation, characterization, and application in HPLC

Mesoporous organosilicas with both R-(+)-1,1'-binaphthyl-2,2'-diamine and ethane moieties bridging in the framework were synthesized. This mesoporous material was prepared via the one-step co-condensation of N,N'-bis-[(triethoxysilyl)propyl]-(R)-bis-(ureido)-binaphthyl (Si-DABN) with 1,2-bis(triethoxysilyl)ethane (BTSE) using octadecyltrimethylammonium chloride (C(18) TMACl) as a structural directing agent with the aid of a co-solvent (ethanol) in basic medium. The morphology of these bifunctionalized mesoporous organosilicas is sensitive to the Si-DABN mole fraction and the base concentration. And the mesostructure becomes less ordered as the mole fraction of Si-DABN in the initial mixture increases from 10 to 40%. Elemental analysis and Fourier transform infrared (FT-IR) spectrometer indicate that the binaphthyl diamine was successfully introduced to the mesoporous organosilicas. Acidic conditions are more suitable than basic ones for the hydrolysis and condensation of (R)-2,2'-dicyanomethoxy-6,6'-di[(2-triethoxysilyl)ethenyl]-1,1'-binaphthyl, a chiral silane precursors with a short silane side chain on the binaphthyl group. A column packed with these bifunctionalized mesoporous organosilica spheres exhibits greater selectivity for R/S-1,1'-bi-2,2'-naphthol than one packed with commercial SiO(2) grafted with N,N'-bis-[(triethoxysilyl)propyl]-(R)-bis-(ureido)-binaphthyl. Binaphthol and bromosubstituted binaphthol were fully resolved, but two ether derivatives were only partially enantioseparated and the other three ester derivatives were no fully resolved on the column via co-condensation method.     

Highly selective olefin epoxidation with aqueous H2O2 over surface-modified TaSBA15 prepared via the TMP method

Trialkylsiloxy-modified Ta(v) centers on mesoporous silica exhibit excellent selectivity for epoxide formation (>98% after 2 h) in the oxidation of cyclohexene using aqueous H2O2 as the oxidant; the modified catalysts exhibit an increased lifetime, retaining high selectivity after 6 h of reaction (>95% epoxide).