Directional coupler wavelength selective filter based on dispersive Bragg reflection waveguide

A new type of wavelength selective filter, based on high differential dispersion between two coupled waveguides, is presented. The Bragg Reflection Waveguide displays high effective refractive index dispersion, due to the interaction of the guided mode with the two confining Bragg reflectors. When coupled with a weakly guided buried channel silica waveguide, a very narrow bandwidth filter (<1 nm) can be easily produced, in a shorter length, with respect to directional couplers made with standard step index channel waveguides. The complete design methodology, fabrication and characterization are presented.     

Thermally switchable and discretely tunable comb filter with a linearly chirped fiber Bragg grating

We propose and experimentally demonstrate a novel switchable and discretely tunable comb filter based on a thermally induced linearly chirped fiber Bragg grating. Experimentally we achieved a thermally induced optical bandpass filter that has eight switchable passband peaks with peak separations of 1.6 and 3.2 nm, a very narrow bandwidth (as small as 10 pm) of each peak, a tunable range of 16.5 nm, and a greater than 25 dB rejection ratio. Two spectral peaks separated by only 0.8 nm were also obtained with this comb filter. This filter provides the unique advantages of an all-fiber structure, switchable spectral peaks, independent tuning of the center wavelength and wavelength spacing of the spectral peaks, low polarization sensitivity, simple structure, ease of fabrication, and low cost.     

Electrically tunable Sagnac filter based on a photonic bandgap fiber with liquid crystal infused

We demonstrate an electrically tunable Sagnac filter based on a photonic bandgap fiber that is realized by infusing liquid crystal into a solid-core air-hole photonic crystal fiber. The filter enables an electrical tuning with a range of about 26 nm for one single interference minimum in the transmission bandgap from 1330 to 1650 nm wavelength. The tuning efficiency is averaged to 0.53 nm/V.     

Superimposed Fiber Gratings Based Wavelength Selectable Fiber Laser

A novel wavelength selectable fiber ring laser was proposed. Superimposed fiber Bragg gratings with uniform reflectivity were made to serve as comb-like filter. Optical tunable filter combined with the comb filter realized fast and accurately wavelength selectivity. The SMSR at each wavelength is more than 50dB.     

Passive mode locking at harmonics of the free spectral range of the intracavity filter in a fiber ring laser

We report the passive mode-locking at harmonics of the free spectral range (FSR) of the intracavity multi-channel filter in a fiber ring laser. The laser uses a sampled fiber Bragg grating (SFBG) with a free spectral range (FSR) of 0.8 nm, or 99 GHz at 1555 nm, and a length of highly nonlinear photonic crystal fiber with low and flat dispersion. Stable picosecond soliton pulse trains with twofold to sevenfold enhancement in the repetition rate, relative to the FSR of the SFBG, have been achieved. The passive mode-locking mechanism that is at play in this laser relies on a dissipative four-wave mixing process and switching of repetition rate is realized simply by adjustment of the intracavity polarization controllers.     

Programmable all-fiber structured waveshaper based on linearly chirped fiber Bragg grating and digital thermal controller

We proposed and experimentally demonstrated an all-fiber structured programmable optical bandpass filter (waveshaper) based on a linearly chirped fiber Bragg grating and a digital-controlled thermal array. The key parameters of this filter such as the number of transmission channels, passing bandwidth per channel, central wavelength as well as the channel spacing can be reconfigured independently and flexibly by a program-controlled circuit. We have achieved in experiments the tunable passing bandwidth ranging from < 0.04 to 1.55 nm, adjustable central wavelength ranging from 1,547.16 to 1,558.64 nm, and a minimum wavelength spacing of 0.91 nm. The insertion loss of the whole device and the sideband rejection ratio are about 1.76 and 28 dB, respectively.     

Ultranarrow dual-transmission-band fiber Bragg grating filter and its application in a dual-wavelength single-longitudinal-mode fiber ring laser

A fiber Bragg grating filter with ultranarrow dual-transmission bands implemented using the equivalent phase shift technique is demonstrated. A fiber ring laser that incorporates a dual-transmission-band fiber Bragg grating filter in the ring cavity is implemented. Dual-wavelength single-longitudinal-mode lasing with a wavelength spacing as small as 0.147 nm at room temperature is experimentally demonstrated.     

基于阵列波导光栅的智能服装人体测温解调系统研究

研究并实现了一种应用于智能服装中人体温度测量的阵列波导光栅解调系统。分析了系统的解调原理,搭建了光纤布拉格光栅解调实验平台,采用了强度法解调出光纤光栅的布拉格波长,完成了光纤光栅传感器串联前后解调的实验。结果表明,系统对光纤布拉格光栅的布拉格波长的解调具有高线性度,波长测量精度可达0.001 nm,光纤布拉格光栅传感器间串扰所造成的解调误差为0.000 5 nm,人体温度的测量误差为±0.16 ℃。该解调系统精度高、串扰低,可适用于智能服装中人体温度的测量。     

Ytterbium femtosecond fiber laser without dispersion compensation tunable from 1015 nm to 1050 nm

We report on a widely tunable ytterbium fs-fiber laser without dispersion compensation. The all-normal dispersion laser contains a spectral filter for wavelength tuning and for generating additional amplitude modulation to support the nonlinear polarization evolution as mode-locking mechanism. By tilting the interference filter the center wavelength of the laser can be tuned from 1015 nm to 1050 nm with a pulse energy up to 2.0 nJ. The pulses can be dechirped externally to 108 fs.     

Wavelength-spacing-tunable multichannel filter incorporating a sampled chirped fiber Bragg grating based on a symmetrical chirp-tuning technique without center wavelength shift

We propose and experimentally demonstrate a simple and flexible scheme for a wavelength-spacing-tunable multichannel filter exploiting a sampled chirped fiber Bragg grating based on a symmetrical modification of the chirp ratio. Symmetrical bending along a sampled chirped fiber Bragg grating attached to a flexible cantilever beam induces a variation of the chirp ratio and a reflection chirp bandwidth of the grating without a center wavelength shift. Accordingly, the wavelength spacing of a sampled chirped fiber Bragg grating is continuously controlled by the reflection chirp bandwidth variation of the grating corresponding to the bending direction, which allows for realization of an effective wavelength-spacing-tunable multichannel filter. Based on the proposed technique, we achieve the continuous tunability of the wavelength spacing in a range from 1.51 to 6.11 nm, depending on the bending direction of the cantilever beam.     

锁模脉冲波长连续可调谐光纤激光器

利用在腔内加入可调谐光纤光栅滤波器使“8”字形腔掺Yb3+光纤激光器在锁模状态下实现波长连续可调谐.实验中,在保证锁模状态稳定的情况下,通过调节可调谐光纤光栅滤波器,使激光器输出锁模脉冲的中心波长在1 047 nm～1 055 nm范围内连续调谐,重复频率稳定维持在4.9 MHz.在中心波长1 053 nm处,测得锁模脉冲输出平均功率为8.02 mW,光谱带宽1 nm,脉冲宽度为259.3 ps.这种“8”字形腔被动锁模光纤激光器在锁模状态下对波长连续可调谐,并可长时间稳定工作.     

基于色散补偿光纤的高速光纤光栅解调方法

本文提出并论证了一种光纤光栅高速解调的新方法, 利用色散补偿光纤的色散效应, 将光纤光栅的波长漂移信息转换成时域信息. 采用脉冲激光器作为光源, 仅需一个光脉冲可获取单根光纤上所有光纤光栅的反射光脉冲, 再根据各个光栅反射回光脉冲的延时变化即可实现波长的解调. 本方法可用于准分布光纤光栅传感网络解调, 系统采用全光纤结构, 无需波长扫描, 大大提高了解调速度. 本文搭建了测试系统进行实验验证, 对3个光纤光栅组成的准分布式传感网络进行了解调, 实验结果表明, 解调出的光纤光栅布喇格波长线性度好, 解调速度最高可达1 MHz, 采样数据取10次平均后解调线性度可达0.9969, 解调误差约为27.8 pm.     

基于双层金属光栅的中波红外多通道滤光片结构

提出一种多通道平面窄带滤光片阵列结构,该结构由双层金属光栅及其两侧的分布式布拉格反射器（DBRs）组成。所设计的多通道滤光片中心波长范围超过200 nm,每一个通道的中心波长可以通过调节光栅狭缝宽度来调节,从而实现多通道窄带滤光阵列。该结果为中波红外多通道窄带滤光片的设计提供了一条新的路径。     

Dynamic strain monitoring by wavelength locking between two fiber Bragg gratings fiber sensing system

We demonstrated a fiber sensing system using the method of wavelength locking of two identical fibers Bragg gratings (FBG) to interrogate the wavelength shift by directly measuring the intensity of the reflection from the sensing Bragg grating. The light source of the fiber sensing system is an EDFA fiber ring laser pumped by a 980 nm laser diode and a narrow bandwidth fiber Bragg grating for the filter of the ring laser resonator. The wavelength shift is converted to the intensity deviation of the reflection from the sensing FBG under strain variation, and is able to achieve real-time sensing of the dynamic strain sensing in civil engineering. The characteristics and key factors to maintain stability of the dynamic strain sensing system are discussed.     

Transmission of 20 Gb/s PAM-4 signal over 20 km optical fiber using a directly modulated tunable DBR laser

We report 20 Gb/s transmission of four-level pulse amplitude modulation(PAM) signal using a directly modulated tunable distributed Bragg reflector(DBR) laser. Transmission distance over 20 km was achieved without using optical amplifiers and optical dispersion compensation modules. A wavelength tuning range of 11.5 nm and a 3 dB bandwidth greater than 10 GHz over the entire wavelength tuning range were obtained.     

Design of dispersion-compensating Bragg fiber with an ultrahigh figure of merit

We report a novel idea for achieving highly efficient dispersion-compensating Bragg fiber by exploiting a modified quarter-wave stack condition. Our Bragg fiber yielded an average dispersion of approximately -1800 ps/(nm km) across the C band for the fundamental TE mode and an ultrahigh figure of merit of approximately 180,000 ps/(nm dB), which is at least 2 orders of magnitude higher than that of conventional dispersion-compensating fibers. The proposed methodology could be adopted for the design of a dispersion compensator across any desired wavelength range.     

NOLM-based wavelength conversion with FBG band-pass filter for optical packet switching

Nonlinear-optical-loop-mirror wavelength conversion is studied in details. A set of two-phase-shiftedBragg gratings are introduced into the coverter,serving as a narrow band-pass filter to remove newfrequencies generated by walk-off and to compensate the dispersion. Numerical simulations are performedto validate our method. The results show that the converted pulses after the filter are reshaped and,sometimes, even compressed.     

Polymer optical fiber Bragg grating acting as an intrinsic biochemical concentration sensor

We demonstrate an intrinsic biochemical concentration sensor based on a polymer optical fiber Bragg grating. The water content absorbed by the polymer fiber from a surrounding solution depends on the concentration of the solution because of the osmotic effect. The variation of water content in the fiber causes a change in the fiber dimensions and a variation in refractive index and, therefore, a shift in the Bragg wavelength. Saline solutions with concentration from 0% to 22% were used to demonstrate the sensing principle, resulting in a total wavelength shift of 0.9 nm, allowing high-resolution concentration measurements to be realized.     

相位调制边带失衡问题研究

 高功率激光系统中一般利用相位调制器对单纵模激光进行频谱展宽以避免受激布里渊散射，当后继系统中的滤波器存在中心波长偏差时，则会导致相位调制产生的边带失衡，使光信号出现较为严重的高频起伏。基于前端系统模拟平台对此问题进行了数值模拟研究，结果表明滤波后的高频起伏随滤波器带宽变窄和中心波长偏差增大而加剧。分析表明0.2 nm带宽的滤波器出现0.05 nm左右的波长偏差时，将引起24.3%左右的顶部起伏。实验中根据分析将滤波器带宽从0.2 nm加大到0.4 nm，成功将脉冲顶部起伏从25.2%减小到了4.4%，对前端系统的研制起到了很好的指导作用。     

A Novel Edge Filter Demodulation Technique by Using High Birefringence Fiber Sagnac Loop Mirror

A novel way of edge filter demodulation for fiber Bragg grating sensor is put forward. A high birefringence fiber Sagnac loop mirror is used as edge filter to demodulate FBG sensor wavelength shift in range of about 8 nm.