Neptunium determination by inductively coupled plasma mass spectrometry (ICP-MS)

The determination of neptunium-237 (²³⁷Np) traditionally has been performed by alpha spectrometry or neutron activation analysis. These methods are labor intensive and require several days for completion. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a possible alternative for²³⁷Np determinations. This paper describes the analytical method developed for samples that have significant levels of uranium present. The lower reporting limits achievable by ICP-MS are competitive with the counting methods, but the real advantage for this laboratory lies in the lower cost and faster turnaround time provided by ICP-MS.     

Determination of plutonium by inductively coupled plasma mass spectrometry (ICP-MS)

Inductively coupled plasma mass spectrometry (ICP-MS) has been applied to the measurement of plutonium isotopes in soils. In the ICP-MS, a calibration curve method was conveniently utilized even in high viscosity solution using a Babington nebulizer. Plutonium concentrations in soil around the Kashiwazaki-Kariwa nuclear power station were found to be in the range of 0.054 to 1.0 Bq/kg with an average of 0.27 Bq/kg. The ratios of ²³⁹Pu/²⁴⁰Pu were also obtained with the ICP-MS to investigate the origin of Pu-isotopes. On the basis of this result, the origin of the Pu-isotopes was attributed to be fallout from the past atmospheric nuclear tests.     

Thorium and iodine memory effects in inductively-coupled plasma mass spectrometry

Thorium and iodine memory effects have been characterized experimentally for inductively-coupled plasma mass spectrometry by adding ammonia gas directly to the spray chamber and nebulizing aqueous ammonia sample solutions to assess analyte memory retention sites. Thorium memory effect originates from the tendency of an unidentified thorium compound to volatilize from the spray-chamber walls, and not from Th compound adsorption to nebulizer tubing. The mass spectrometer skimmer and sampler cones, ion optics, quadrupole, and other components are not responsible for the memory effect. Unlike that of thorium the iodine memory effect originates from adsorption of iodine compounds on nebulizer tubing surfaces and from volatilization of HI and I2 from the spray-chamber walls. Addition of ammonia sample solutions or ammonia gas directly to the spray chamber eliminated the Th and I memory effects in practical analyses, and blank levels were achieved after 2 min wash-outs. Quantitative recoveries were obtained for Th and I in reference materials.     

Thorium and iodine memory effects in inductively-coupled plasma mass spectrometry

Thorium and iodine memory effects have been characterized experimentally for inductively-coupled plasma mass spectrometry by adding ammonia gas directly to the spray chamber and nebulizing aqueous ammonia sample solutions to assess analyte memory retention sites. Thorium memory effect originates from the tendency of an unidentified thorium compound to volatilize from the spray-chamber walls, and not from Th compound adsorption to nebulizer tubing. The mass spectrometer skimmer and sampler cones, ion optics, quadrupole, and other components are not responsible for the memory effect. Unlike that of thorium the iodine memory effect originates from adsorption of iodine compounds on nebulizer tubing surfaces and from volatilization of HI and I₂ from the spray-chamber walls. Addition of ammonia sample solutions or ammonia gas directly to the spray chamber eliminated the Th and I memory effects in practical analyses, and blank levels were achieved after 2?min wash-outs. Quantitative recoveries were obtained for Th and I in reference materials.     

Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and Tl, it was possible to obtain accurate results despite the 35–¶40% suppression in the signals. Isobaric overlap was only a problem in the cases of ⁴²Ca and ⁷⁸Se; ⁴⁴Ca and ⁷⁷Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and T1, it was possible to obtain accurate results despite the 35-40% suppression in the signals. Isobaric overlap was only a problem in the cases of 42Ca and 78Se; 44Ca and 77Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

电感耦合等离子体质谱法测定血液和精液中的硼

采用HNO3-H2O2和氨水-甘露醇两种方法处理样品,电感耦合等离子体质谱法（ICP-MS）测定血液和精液中的硼。Be作内标补偿基体效应,并用标准加入法验证了方法的可靠性,标准加入法与外标法测定结果相吻合。在测定B的同时,还可进行Cr、Cu、Cd、Ba、Sr、Mn、Co、Tl、Li、Pb、Zn、Sc、Ti、V、As等多元素测定。两种样品处理方法的测定值呈显著正相关（r=0.99919）。方法检出限为0．11ng／mL（氨水-甘露醇法）,0.06ng／mL（HNO3-H2O2）。已用于测定某硼矿区血液和精液样品中的硼。     

Coupling of inductively coupled plasma mass spectrometry (ICP-MS) with electrothermal vaporisation (ETV)

An inductively coupled plasma mass spectrometer (ICP-MS) was coupled on-line with an electrothermal vaporisation (ETV). The influence of aerosol gas flow as well as the variation of the coupling distance on the signal intensity was investigated and compared with the results of hydraulic high-pressure nebulizer (HHPN) measurements. Furthermore, temperature programs known from graphite furnace atomic absorption spectroscopy (GFAAS) were applied to ETV-ICP-MS. After optimisation of temperature programs, calibration series based on mono-element and multi-element solutions were carried out. The dynamic range and the detection limits of the method were determined. By use of internal standardisation it was tried to improve linearity and reproducibility. According to the results, internal standardisation does not have a great impact on linearity, but may be a useful tool to improve reproducibility. However, the latter is still low.     

Determination of rubidium by isotope dilution—inductively-coupled plasma mass spectrometry as an alternative to thermal ionization mass spectrometry

The combined techniques of inductively coupled plasma mass spectrometry (ICP-MS) and isotope dilution yield as much as a three-fold improvement in precision for trace-level rubidium determinations in geological materials over conventional isotope dilution using thermal ionization mass spectrometry (TIMS). Rubidium determinations by TIMS, precise to 0.6% (1 s.d.), are hindered by uncorrectable fractionation effects, whereas fractionation can be monitored during ICP-MS determinations, providing results as precise as 0.17% (1 s.d.). Precise rubidium data are critical for high-precision RbSr geochronology.     

Determination of sources of lead in tap water by inductively coupled plasma mass spectrometry (ICP-MS)

We measured the concentrations of Pb and its isotope ratios in coconmittantly obtained tap water and plumbing materials by inductively coupled mass spectrometry (ICP-MS). The Pb concentrations were determined by external calibration with²⁰⁹Bi as an internal standard. Isotope ratios were measured and mass discrimination corrected by normalization to NIST SRM-981 (common lead isotopic standard). Student/s t-test was used to compare the isotopic ratios of²⁰⁶Pb/²⁰⁷Pb,²⁰⁶Pb/²⁰⁸Pb, and²⁰⁷Pb/²⁰⁸Pb in the tap water with those in various plumbing materials. The comparisons revealed that the source of Pb in most of the tap water samples was derived from copper pipe or solder.     

Determination of arsenic by inductively-coupled plasma atomic emission spectrometry enhanced by hydride generation from organized media

A method is described for the determination of arsenic, which combines a continuous flow hydride generation technique with an inductively coupled plasma atomic emission detection system. Some atomic absorption preliminary studies are described as well. Arsine is generated with NaBH(4) from a didodecyldimethylammonium bromide (DDBA) vesicular medium. The analytical performance of this vesicles-enhanced method is superior to the generation of the hydride from aqueous media: the detection limit (0.6 ppb) is improved by a factor of 2 and greater tolerance to interferences is observed for arsine generation from DDBA vesicles. Precision of As determinations is also improved. The proposed method has been validated for low As levels determinations in two Certified Reference Materials (CRM) sediments with satisfactory results. The potential of organized media to improve hydride generation is addressed.     

质谱技术在核酸研究领域的应用

质谱技术具有快速、准确、灵敏度高等优点,近年来在生物分析方面得到了广泛的应用.核酸作为生命的基本物质,一直是生命领域的研究热点,进展日新月异.而质谱方法也成为了科学家研究核酸的强有力工具,具有广阔的发展前景.本文介绍了核酸检测的质谱技术,并简要综述了质谱在核酸的高级结构研究、与小分子相互作用、DNA损伤与修饰等领域的应用,重点介绍了中国学者的研究成果.     

电感耦合等离子体质谱法(ICP-MS)测定废水中有害元素银的含量

为了寻求一种更加适合废水中低含量银的测定方法,本文采用石墨电热板消解-电感耦合等离子体质谱法测定废水中的低含量银离子。通过仪器工作条件最优化、测定线性回归方程、检出限、准确度、精密度、实际样品加标回收率,并与电感耦合等离子体发射光谱法（ICP-AES）的实际样品测定结果进行比对来评价该方法的实用性。石墨电热板消解-电感耦合等离子体质谱法前处理方法简便,分析速度快且该方法检出限较低,为0.03ug/L,标准样品测定的相对误差为-0.7%～1.7%,相对标准偏差为1.1%～2.5%,实际样品加标回收率在97.0%～103%之间,回收率高,能够满足废水中低含量银的测定。     

Rapid determination of 237Np in soil samples by multi-collector inductively-coupled plasma mass spectrometry and gamma spectrometry

A radiochemical procedure is developed for the determination of ²³⁷Np in soil with multi-collector inductively-coupled plasma mass spectrometry (MC-ICP-MS) and gamma-spectrometry. ²³⁹Np (milked from ²⁴³Am) was used as an isotopic tracer for chemical yield determination. The neptunium in the soil is separated by thenoyl-trifluoracetone extraction from 1 M HNO₃ solution after reducing Np to Np(IV) with ferrous sulfamate, and then purified with Dowex 1 × 2 anion exchange resin. ²³⁹Np in the resulting solution is measured with gamma-spectrometry for chemical yield determination while the ²³⁷Np is measured with MC-ICP-MS. Measurement results for soil samples are presented together with those for two reference samples. By comparing the determined value with the reference value of the ²³⁷Np activity concentration, the feasibility of the procedure was validated.     

Enzymatic strategies for the characterization of nucleic acids by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) is a powerful technique used for the identification and characterization of DNA polymorphisms. Continual improvement in instrument design assures high mass measurement accuracy, sensitivity, and resolving power. This work describes an eclectic array of enzymatic strategies we have invoked in order to detect single-nucleotide polymorphisms by ESI-MS, although other applications may be envisioned. One strategy combines the use of two enzymes, exonuclease III and lambda exonuclease, to provide a ladder of single-stranded DNA fragments for straightforward sequence identification by mass spectrometry. A second strategy combines restriction enzymes to screen for polymorphisms present within specific amplicons. Finally, we describe the use of stable-isotope-labeled nucleotides for the determination of length and base composition of a PCR product.     

微波消解法-电感耦合等离子体质谱(ICP-MS)法测定韭菜中11种元素

为快速、准确测定韭菜中多元素含量,采用微波消解法对韭菜中样品进行消解处理,优化了前处理方法、ICP-MS工作条件和检测方法,利用微波消解-电感耦合等离子体质谱法测定韭菜中Pb、Cd、Se、As、Zn、Cu、Ni、Fe、Cr、Ca、K等11种元素含量。结果表明,在硝酸-双氧水(7:1)体系中,消解功率1550W,温度梯度为120℃-160℃-195℃,总时长为45min,赶酸温度选择150℃,可将韭菜完全消解,并且ICP-MS射频功率设为1550W,运用在线内标的检测方式降低非质谱干扰。11种元素回归系数R₂^{均大于0.999,方法检出限为}0.002～0.100μg/kg,方法定量限为0.006～0.300μg/kg。方法回收率88.0%～102.7%,相对标准偏差为1.8%～4.6%,可以满足韭菜中多种元素同时测定的需求。方法具有灵敏度高、线性范围宽、准确性高等特点,可为韭菜样品的多元素同时测定提供可靠的方法支撑。     

Tracking traces of transition metals present in concrete mixtures by inductively-coupled plasma mass spectrometry studies

Transition metals can have a significant impact in research related to the dosage optimization of superplasticizers. It is known that the presence of transition metals can influence such doses, and the application of a contemporary instrumental method to obtain the profiles of subsisting transition elements in concrete mixtures would be useful. In this work, inductively-coupled plasma mass spectrometry (ICP-MS) is investigated as a possible tool to track traces of transition metals in concrete mixtures. Depth profiling using ICP-MS on proofed and unproofed concrete shows the presence of Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn at trace intensities in the bulk of the samples under investigation. The study demonstrates that the transition metals present in the concrete sample are largely a part of the cement composition and, to a minor degree, a result of exposure to the seawater after curing. The coated concrete samples have a metal distribution pattern similar to the uncoated samples, but slight differences in intensity bear testimony to the very low levels that originate from the exposure to seawater. While X-ray diffraction fails to detect these traces of metals, ICP-MS is successful in detecting ultra-trace intensities to parts per trillion. This method is not only a useful application to track traces of transition metals in concrete, but also provides information to estimate the pore size distribution in a given sample by very simple means.     

Determination of rare earth element in carbonate using laser-ablation inductively-coupled plasma mass spectrometry: an examination of the influence of the matrix on laser-ablation inductively-coupled plasma mass spectrometry analysis

In this study, we examined the influence of the matrix on rare earth element (REE) analyses of carbonate with laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) using carbonate and NIST glass standards. A UV 213 nm Nd:YAG laser system was coupled to an ICP-MS. Laser-ablation was carried out in both He and Ar atmospheres to investigate the influence of ablation gas on the analytical results. A small amount of N₂ gas was added to the carrier gas to enhance the signal intensities. Synthetic CaCO₃ standards, doped with REEs, as well as NIST glasses (NIST SRM 610 and 612) were used as calibration standards. Carbonatite, which is composed of pure calcite, was analyzed as carbonate samples. The degree of the influence of the matrix on the results was evaluated by comparing the results, which were calibrated by the synthetic CaCO₃ and NIST glass standards. With laser-ablation in a He atmosphere, the differences between the results calibrated by the synthetic CaCO₃ and NIST glass standards were less than 10% across the REE series, except for those of La which were 25%. In contrast, for the measurements made in an Ar atmosphere, the results calibrated by the synthetic CaCO₃ and NIST glass standards differed by 25-40%. It was demonstrated that the LA-ICP-MS system can provide quantitative analysis of REE concentrations in carbonate samples using non matrix-matched standards of NIST glasses.     

Studies of cisplatin and hemoglobin interactions using nanospray mass spectrometry and liquid chromatography with inductively-coupled plasma mass spectrometry

Interactions of cisplatin with hemoglobin (Hb) were studied using both nanoelectrospray mass spectrometry (nanoESI-MS) and a combination of size exclusion high performance liquid chromatography with inductively coupled plasma mass spectrometry (HPLC-ICPMS). Size exclusion HPLC separation of free and protein-bound cisplatin followed by simultaneous monitoring of 195Pt and 57Fe demonstrated the presence of Hb-bound Pt complexes. Nanospray quadrupole time-of-flight mass spectrometry studies of the Hb-cisplatin complexes further demonstrated the specific binding of cisplatin to the alpha-chain, heme-alpha, beta-chain, and heme-beta units of hemoglobin. Accurate mass measurements and tandem mass spectrometry information confirmed the Hb-cisplatin complexes. The formation of Hb-cisplatin complexes was observed at the sub-microM to microM concentration levels of cisplatin, which are relevant to clinical levels. These findings and the techniques developed for cisplatin-Hb interaction studies are useful for understanding of drug-protein interactions.