2-alkyl-1,3-butadiene polymerization under the influence of π-allylic complexes of transition metals

Stereoregulation in the polymerization of 2-alkyl-1,3-butadienes with transition metal π-allylic complexes has been studied. The direction of isoprene polymerization is shown to be a function of the nature of the metal and ligands in the allylic compound. The presence of acidic ligands in π-allylic complexes of Zr, Cr, Mo, and Co contributes to 1,4-addition and increases the selectivity of π-allylic nickel complexes, favoring cis-1,4-structure formation. Investigation of the model reaction of 2-alkyl-1,3-butadienes with bis(π-perdeuterocrotyl nickel iodide) revealed that active sites have an π-allylic type structure. The mechanism of formation of π-allylic adducts and the main factors which determine the dependence of direction and rate of polymerization on the nature of a monomer in the diene series: 2-methyl-1,3-butadiene(isoprene), 2-ethyl-1,3-butadiene, 2-isopropyl-1,3-butadiene, and 2-tert-butyl-1,3-butadiene, are discussed.     

Highly efficient synthesis of stereodefined multisubstituted 1,4-dicyano- and 1-cyano-1,3-butadienes and their reactions with organolithium reagents

Stereodefined multisubstituted 1-cyano- and 1,4-dicyano-1,3-butadiene derivatives were obtained in excellent yields of the isolated product from their corresponding monohalo- and dihalobutadienes and CuCN. This reaction proceeded with high stereoselectivity and retention of the stereochemistry of the starting halobutadienes. A study of the utility of the thus-obtained 1-cyano- and 1,4-dicyano-1,3-butadiene derivatives was demonstrated by their reactions with organolithium reagents. 2H-Pyrrole or iminocyclopentadiene derivatives were formed in high yields from 1-cyano-4-halo-1,3-butadienes and organolithium reagents. When 1,4-dicyano-1,3-butadienes were treated with organolithium reagents followed by trapping with electrophiles, a tandem process took place to afford 2H-pyrrolyl nitriles in excellent yields. Reduction of 1,4-dicyano-1,3-butadiene derivatives with LiAlH4 showed novel reaction patterns relative to normal nitriles.     

Preparation of partially substituted 1-halo- and 1,4-dihalo-1,3-dienes via reagent-controlled desilylation of halogenated 1,3-dienes

Depending on the desilylation reagents used, 1-halo-1,4-bis(trimethylsilyl)-1,3-butadienes afforded either 1-halo-1-trimethylsilyl-1,3-butadienes or 1-halo-4-trimethylsilyl-1,3-butadienes in excellent yields with excellent selectivity, respectively, when treated with CF3COOH or with NaOMe. These monosilylated 1,3-butadiene products could be further desilylated to generate their corresponding halobutadienes via the above reagent-controlled desilylation reaction. When 1,4-dihalo-1,4-bis(trimethylsilyl)-1,3-dienes were treated with MeONa/MeOH at room temperature, desilylation of both of the two trimethylsilyl groups took place to afford their corresponding 1,4-dihalo-1,3-dienes in excellent yields. The commonly used desilylation reagent CF3COOH did not work for these dihalobutadienes.     

Trifluoromethyl groups in crystal design of 1,4-diphenyl-1,3-butadienes for topochemical [2 + 2] photodimerization

[structure: see text] UV irradiation of the powdered crystalline sample of each of three (E,E)-1,4-di(trifluoromethyl-substituted)phenyl-1,3-butadienes (1-3) was found to yield a single [2 + 2] cycloaddition product in the solid state. Moreover, upon irradiation, the crystalline samples of two (E,E)-1,4-di(trifluoromethyl- and fluorine-substituted)phenyl-1,3-butadienes (4, 5) undergo a similar conversion to afford a [2 + 2] cycloaddition product, respectively. Our observations suggest that trifluoromethyl groups can be used to direct 1,4-diphenyl-1,3-butadiene molecules to form a parallel, offset-stacked orientation suitable for topochemical [2 + 2] cycloaddition.     

Reactions of 1,2-diaza-1,3-dienes with thiol derivatives: a versatile construction of nitrogen/sulfur containing heterocycles

The synthesis of substituted 2,3-dihydro-1,4-thiazines, fused cycloalkyl-1,4-thiazines, 1,4-benzothiazines and fused cycloalkyl-1,4-benzothiazines by 1,4-addition of 1,2-aminothiols to 1,2-diaza-1,3-dienes bearing carboxylate, carboxamide, or phosphorylated groups and subsequent internal heterocyclization is described. The reaction of carboxylated 1,2-diaza-1,3-butadienes with 2-(butylamino)ethanethiol affords 1,4-thiazinan-3-ones. The solid-phase reaction of polymer-bound 1,2-diaza-1,3-butadienes with 1,2-aminothiols produces 2,3-dihydro-1,4-thiazines and 1,4-benzothiazines.     

Regioselective synthesis of functionalized 3,5-diketoesters and 2,4-diketosulfones by uncatalyzed condensation of 1-methoxy-1,3-bis(trimethylsilyloxy)-1,3-butadienes with alpha,beta-unsaturated acid chlorides and sulfonyl chlorides

The reaction of 1-methoxy-1,3-bis(trimethylsilyloxy)-1,3-butadienes with alpha,beta-unsaturated and functionalized acid chlorides afforded a variety of 3,5-diketoesters which are not readily available by other methods. The reaction of 1-methoxy-1,3-bis(trimethylsilyloxy)-1,3-butadiene with sulfonyl chlorides allows a direct synthesis of 2,4-diketosulfones.     

Synthesis and Structural Characterization of Butadienylcalcium-based Heavy Grignard Reagents and a Ca4[O] Inverse Crown Ether Complex

The structure elucidation of heavy Grignard reagents (RAeX, Ae=Ca, Sr, and Ba, X=halides) has been greatly strived after, mainly because of their inaccessibility and remarkable instability. The synthesis of a series of butadienylcalcium compounds is presented, including 1-calcio-4-lithio-1,3-butadiene, 1,4-dicalcio-1,3-butadiene, and a Ca₄[O] inverse crown ether complex, via the reaction between 1,4-dilithio-1,3-butadienes and calcium iodide in THF. Single-crystal X-ray analysis of these unprecedented heavy Grignard reagents revealed unique structural characteristics and bonding modes. Preliminary reaction chemistry was investigated. This study provides a novel class of alkenyl heavy Grignard reagents and a useful synthetic strategy for otherwise unavailable reactive organometallic compounds.     

Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

Synthesis of 1,1,4,4-tetrabromo-2-butenes and related compounds via desilylation-bromination of silylated 1,3-butadiene derivatives

The combination of zirconocene-mediated coupling of silylated alkynes with a protonation-desilylation or bromination-desilylation process afforded otherwise unavailable butadiene derivatives. When (E,E)-2,3-dialkyl-1,4-bis(trimethylsilyl)-1,3-butadienes were treated with 3 equiv of Br(2) in CH(2)Cl(2), (E)-2,3-dialkyl-1,1,4,4-tetrabromo-2-butenes were obtained in excellent yields with perfect stereoselectivity.     

Cationic polymerization of dimethyl-1,3-butadienes

The cationic polymerizations of dimethyl-1,3-butadienes with various catalysts in methylene chloride and toluene have been investigated. The activity of catalysts decreased in the order WCl₆ > AcClO₄ > SnCl₄·TCA > BF₃OEt₂. The homopolymerization rate of dimethyl-1,3-butadienes with WCl₆, AcClO₄, and SnCl₄·TCA decreased in the order 1,3-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,4-hexadiene. The polymers prepared with WCl₆, SnCl₄.TCA, and BF₃OEt₂ were rubberlike polymers or white powders, whereas those prepared with AcClO₄ were oily oligomers. The 1,4-propagation increased in the order 1,2-dimethyl-1,3-butadiene < 1,3-dimethyl-1,3-butadiene < 2,3-dimethyl-1,3-butadiene < 2,4-hexadiene. This order may indicate that the steric effect of methyl group determine primarily the microstructure of the polymer. The relative reactivity of dimethyl-1,3-butadienes toward a styryl cation decreased in the order 1,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 2,4-hexadiene. This order may be explained in terms of the stability of the resulting allylic cation.     

Quantum-Chemical Study of Electronic Structure and Reactivity of Diphospha-1,3-Butadienes

Abstract

Quantum-chemical calculations of the electronic structure of 1,3-, 1,4- and 2,3-diphospha-1,3-butadienes (DPB) and their derivatives with different substituents were performed. The MNDO method was used to describe the electronic structure of phosphaalkenes. The frontier orbitals of all unsubstituted DPB are of π-type. The highest occupied molecular orbital (HOMO) is delocalized through both double phosphorus-carbon bonds; the next occupied MO is a combination of two phosphorus lone pairs (n-MO). The HOMO of 2,3-DPB differs markedly from those of 1,3- and 1,4-isomers: the contributions of phosphorus and carbon p-orbitals are nearly equal, and the energy gap between HOMO and n-MO is very small (0.008 eV). The introduction of the electron-withdrawing substituents results in the reverse order of these MO's. In contrast with 1,3- and 1,4-isomers, the double bonds of 2,3-DPB are almost non-polar. Effect of substituents upon the electron density distribution are considered. The results indicate that orbitally controlled 1,4-additions should be characteristic for the derivatives of 1,3- and 1,4-DPB, similar to 1,3-butadiene. In case of 2,3-DPB, tendency to 1,4-addition should be lower; for its derivatives the reaction type depends greatly upon the electronic effects of substituents. In particular, reactions involving phosphorus lone pairs should be typical for the derivatives of 2,3-DPB with electron-withdrawing substituents.     

PAH formation under single collision conditions: reaction of phenyl radical and 1,3-butadiene to form 1,4-dihydronaphthalene

The crossed beam reactions of the phenyl radical (C(6)H(5), X(2)A(1)) with 1,3-butadiene (C(4)H(6), X(1)A(g)) and D6-1,3-butadiene (C(4)D(6), X(1)A(g)) as well as of the D5-phenyl radical (C(6)D(5), X(2)A(1)) with 2,3-D2-1,3-butadiene and 1,1,4,4-D4-1,3-butadiene were carried out under single collision conditions at collision energies of about 55 kJ mol(-1). Experimentally, the bicyclic 1,4-dihydronaphthalene molecule was identified as a major product of this reaction (58 ± 15%) with the 1-phenyl-1,3-butadiene contributing 34 ± 10%. The reaction is initiated by a barrierless addition of the phenyl radical to the terminal carbon atom of the 1,3-butadiene (C1/C4) to form a bound intermediate; the latter underwent hydrogen elimination from the terminal CH(2) group of the 1,3-butadiene molecule leading to 1-phenyl-trans-1,3-butadiene through a submerged barrier. The dominant product, 1,4-dihydronaphthalene, is formed via an isomerization of the adduct by ring closure and emission of the hydrogen atom from the phenyl moiety at the bridging carbon atom through a tight exit transition state located about 31 kJ mol(-1) above the separated products. The hydrogen atom was found to leave the decomposing complex almost parallel to the total angular momentum vector and perpendicularly to the rotation plane of the decomposing intermediate. The defacto barrierless formation of the 1,4-dihydronaphthalene molecule involving a single collision between a phenyl radical and 1,3-butadiene represents an important step in the formation of polycyclic aromatic hydrocarbons (PAHs) and their partially hydrogenated counterparts in combustion and interstellar chemistry.     

Synthesis of conjugated (1E,3E)- and (1Z,3Z)-1,4-di(n-pyridyl) (or n-quinolyl)-1,3-butadienes from n-(2′-chloroethenyl)pyridine (or quinoline)

The homocoupling reaction between the conjugated n-(2-chloroethenyl)pyridine; n, 2-, 3- and 4- (or quinoline; n, 2- and 4-) mediated by zero-valent nickel complexes at room temperature affords to the corresponding 1,4-diaryl-1,3-butadiene, always as the 1E,3E stereoisomer. The yield in 1,4-diaryl-1,3-butadiene increases with the nickel catalyst and hence, the active zero-valent nickel catalyst is not regenerated during the homocoupling reaction.The stereospecific synthesis of (1Z,3Z)-1,4-di(4′-pyridyl)-1,3-butadiene stereoisomer was efficiently carried out by partial hydrogenation of the appropriate 1,4-di(4′-pyridyl)-1,3-butadiyne.     

Synthesis of 2-boryl-1,3-butadienes from tributylphosphine stabilized zirconacyclopropenes and alkynes

Boryl zirconacycopropenes stabilized with tributylphosphine react with alkynes (terminal and internal) to give predominately 2-boryl-1,3-butadienes, 5, in 40-81% isolated yields. Products 5 are accompanied by 4-boryl-1,3-butadienes in 7-23% when terminal alkynes are inserted. However, the use of an internal alkyne (3-hexyne) gave predominantly 6c.     

Cycloaddition of 1-Aryl-3-trimethylsiloxy-1,3-butadienes in the Synthesis of Natural Quinone Analogs

7-Hydroxy-5-(2-methoxyphenyl)-2-methyl-6-R-1,4-naphthoquinones, 8-hydroxy-1-(2-methoxyphenyl)-3-oxo-1,2,3,4-tetrahydro-9,10-anthraquinone, and 2-ethoxycarbonyl-8-hydroxy-1-(2-methoxyphenyl)-3-trimethylsiloxy-1,1a,4,4a-tetrahydro-9,10-anthraquinone were synthesized by reactions of 1-(2-methoxyphenyl)-2-R-3-trimethylsiloxy-1,3-butadienes with 2-bromo-5-methyl-1,4-benzoquinone and juglone. 1-Aryl-2-ethoxycarbonyl-3-trimethylsiloxy-1,3-butadienes reacted with 1,4-naphthoquinone to afford 1-aryl-2-ethoxycarbonyl-3-hydroxy-9,10-anthraquinones and their 4,4a-dihydro derivatives.     

Borylene transfer from an iron bis(borylene) complex: synthesis of 1,4-diboracyclohexadiene and 1,4-dibora-1,3-butadiene complexes

Diene to be made: By tuning the size of acetylenic substituents, 1,4-diboracyclohexadiene and unprecedented 1,4-dibora-1,3-butadiene complexes were generated in a controlled manner by borylene transfer from an iron bis(borylene) complex to alkynes (see scheme).     

Conformational thermodynamic and kinetic parameters of methyl-substituted 1,3-butadienes

The s-trans/s-cis conformational equilibria of 10 methyl-substituted 1,3-butadienes [(E)- and (Z)-1,3-pentadiene; 2-methyl-1,3-butadiene; (E)-2-methyl-1,3-pentadiene; 2,3-dimethyl-1,3-butadiene; (E,E)-, (E,Z)-, and (Z,Z)-2,4-hexadiene; 2,5-dimethyl-2,4-hexadiene; and (E,E)-2,4-dimethyl-2,4-hexadiene] were explored by trapping high-temperature conformational equilibria by cryogenic deposition. The vapor state enthalpy differences of these s-trans/s-cis conformers, DeltaH(t equilibrium c), were determined by varying the equilibrating temperature and integrating the resulting matrix isolated IR spectra. The results obtained are in good agreement with ab initio calculations at the G3 level. From these thermodynamic parameters, methyl group nonbonded interactions in conjugated 1,3-butadienes were delineated. Rates of decay of s-cis conformers to their s-trans rotamers were obtained in the solid-state by warming up trapped high-temperature equilibrated samples formed from neat depositions. These data were analyzed in terms of dispersive kinetics with matrix site effects in the solid-state modeled by a Gaussian distribution of activation energies. The activation barriers thus obtained were compared with G3 calculations of the enthalpies of activation.     

Synthesis and characterization of polycarbonyl compounds via their BF2-adducts

A cobalt-catalyzed 1,4-hydrovinylation reaction is the key step in the synthesis of 1,3-dicarbonyl and higher tri- and tetracarbonyl compounds after ozonolysis of the 1,4-diene intermediates. For the isolation and characterization of the products, the 1,3-dicarbonyl subunits were complexed with a BF(2)- or a BR(2)-fragment eliminating the keto-enol tautomerisation. Other 2,3-disubstituted 1,3-butadienes can be generated by a Grubbs enyne metathesis of a symmetrical internal alkyne with ethene. After hydrovinylation and ozonolysis, other 1,3-diketones are accessible.     

Synthesis of 2-iminothiazoline derivatives by sequential conjugate addition/annulation/ring-opening reactions

1,2-Diaza-1,3-butadienes reacted with rhodanine affording 2-(mercaptoacetyl)iminothiazoline derivatives through conjugate addition/annulation/ring-opening/oxidative dimerization. The hypothesized ring-closure and ring-opening mechanism was supported by X-ray crystal structure analysis of a compound obtained by reaction of the same reagents with a chiral 1,3-oxazolidine-2-thione derivative.