Prevention of nanoparticle coalescence under high-temperature annealing

An effective method of employing 3-aminopropyldimethylethoxysilane linker molecules to stabilize 4.4 nm FePt nanoparticle monolayer films on a SiO2 substrate as well as to prevent coalescence of the particles under 800 degrees C annealing is reported. As-deposited FePt nanoparticle films in chemically disordered face-centered-cubic phase transform to mostly chemically ordered L1 0 structure after annealing, while the nanoparticles are free from serious coalescence. The method may fulfill the pressing need to prevent nanoparticle coalescence under high-temperature annealing for the development of FePt nanoparticle based products, such as ultrahigh-density magnetic recording media and novel memory devices.     

Release of N(2) from the carbon nanotubes via high-temperature annealing

Nitrogen (N)-doped carbon nanotubes (CNTs) were heated to 1000 degrees C under an ultrahigh vacuum. X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) reveal three different N structures; graphitelike, pyridine-like, and molecular N(2). The vibrationally resolved XANES peaks of N(2) were first observed, suggesting the existence of molecular N(2) as intercalated and trapped forms. The annealing process can decrease the average N content from 6.3 at. % to 3.3 at. %, mainly by releasing molecular N(2). Electron energy-loss spectroscopy (EELS) confirms that the annealing releases molecular N(2) from the CNTs.     

Selective synthesis of boron nitride nanotubes by self-propagation high-temperature synthesis and annealing process

Four types of BN nanotubes are selectively synthesized by annealing porous precursor in flowing NH₃ and NH₃/H₂ atmosphere at temperature ranging from 1000 to 1200 °C in a vertical furnace. The as-synthesized BN nanotubes, including cylinder, wave-like, bamboo-like and bubble-chain, are characterized by XRD, FTIR, Raman, SEM, TEM and HRTEM. Three phenomenological growth models are proposed to interpret growth scenario and structure features of the four types of BN nanotubes. Selectivity of nanotubes formation is estimated as approximately 80-95%. The precursor containing B, Mg, Fe and O prepared by self-propagation high-temperature synthesis (SHS) method plays a key role in selective synthesis of the as-synthesized BN nanotubes. Chemical reactions are also discussed.     

Stable cluster formation in aqueous suspensions of iron oxyhydroxide nanoparticles

Metal oxide and oxyhydroxide nanoparticles are important components of natural aqueous systems and have application in photocatalysis. Uncoated (oxyhydr)oxide nanoparticles can form charge-stabilized colloids in water, but the precise regimes of dispersion and aggregation have been determined for very few nanomaterials. We studied the colloidal behavior of approximately 6 nm nanoparticles of iron oxyhydroxide (FeOOH), a common natural nanoscale colloid, and found that these nanoparticles formed stable suspended clusters under a range of aqueous conditions. Light and X-ray scattering methods show that suspended fractal nanoclusters are formed between pH 5 and 6.6 with well-defined maximum diameters that can be varied from 25 nm to approximately 1000 nm. The nanoclusters retain a very high surface area, and persist in suspension for at least 10 weeks in solution. The process is partially reversible because optically transparent suspensions are regained when nanoparticles that aggregated and settled at pH >7 are adjusted to pH 4 without stirring. However, completely redispersed nanoparticles are not obtained even after one month. Because nanocluster formation is controlled predominantly by surface charge, we anticipate that many metal oxide and other inorganic nanoparticles will exhibit equivalent cluster-forming behavior. Our results indicate that natural nanoparticles could form stable nanoclusters in groundwater that are likely to be highly mobile, with implications for the long-range transport of surface sorbed contaminants.     

Seven-nanometer hexagonal close packed cobalt nanocrystals for high-temperature magnetic applications through a novel annealing process

Seven-nanometer cobalt nanocrystals are synthesized by colloidal chemistry. Gentle annealing induces a direct structural transition from a low crystalline state to the hexagonal close packed (hcp) phase without changing the size, size distribution, and the lauric acid passivating layer. The hcp structured nanocrystals can be easily redispersed in solvent for further application and processing. We found that the magnetization at saturation and the magnetic anisotropy are strongly modified through the annealing process. Monolayer self-assembly of the hcp cobalt nanocrystals is obtained, and due to the dipolar interaction, ferromagnetic behavior close to room temperature has been observed. This work demonstrates a novel approach for obtaining small size hcp structured cobalt magnetic nanocrystals for many technological applications.     

Stable free radical polymerization of n-butyl acrylate in the presence of high-temperature initiators

Living radical polymerizations of acrylate are known to be difficult to achieve using TEMPO as a mediator. The stable free radical polymerization (SFRP) of acrylate tends to stop at low monomer conversion due to the accumulation of TEMPO in the medium as a result of unavoidable bimolecular termination. Rather than solving this problem by destroying the excess nitroxide using ascorbic acid or glyceraldehyde associated with pyridine as reported recently, high temperature initiators were used to slowly and continuously generate new radicals throughout the polymerization to consume the excess TEMPO molecules. Polymerizations of n-butyl acrylate initiated by the alkoxyamine unimer (1-benzoyloxy)-2-phenyl-2-(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)ethane (BST) were performed between 130 °C and 134 °C in the presence of a series of high temperature peroxide and azo initiators. The best results in this study were obtained by the continuous addition of small amounts of di-tert-amyl peroxide throughout the polymerization. Under these conditions, the acrylate polymerizations fulfilled the criteria of a controlled polymerization process although the molecular weight distributions were slightly broad (M_w/M_n ∼ 1.5).     

Features of high-temperature thermal oxidative degradation of organic-inorganic compositions based on poly(methyl methacrylate) with tetrabutoxytitanium

Thermal oxidative degradation of organic-inorganic compositions based on poly(methyl methacrylate) and the methyl methacrylate-methyl acrylate copolymer with tetrabutoxytitanium was studied by thermo-gravimetric methods.     

Stable isotope compositions of CO(2) in background air and at polluted sites in Hungary

CO(2) samples were collected from air at three sites in Hungary for comparison of polluted and background areas. In order to reduce the uncertainties caused by the varying amount of N(2)O, a gas chromatography (GC)-based vacuum separation was applied. The reliability of the procedure was demonstrated by careful standardization and comparison with global network data. The stable isotope data show complex diurnal and seasonal variations that can be explained by fractionations during photosynthesis and respiration. The isotopic characteristics of pollution-derived (anthropogenic) and biogenic CO(2) appear to be indistinguishable at the study sites. However, the sites at unpolluted areas reveal a seasonal variation in the carbon isotope composition of biogenic CO(2) that may be related to changes in soil biogenic activities. The atmospheric background CO(2) shows constant delta(13)C in the region. Finally, the study demonstrates the need for careful standardization of sampling in order to make the data obtained from different sampling systems comparable.     

Stable monovalent aluminum(i) in a reduced phosphomolybdate cluster as an active acid catalyst

Low-valent aluminum Al(i) chemistry has attracted extensive research interest due to its unique chemical and catalytic properties but is limited by its low stability. Herein, a hourglass phosphomolybdate cluster with a metal-center sandwiched by two benzene-like planar subunits and large steric-hindrance is used as a scaffold to stabilize low-valent Al(i) species. Two hybrid structures, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene) were successfully synthesized with Al(i)-sandwiched polyoxoanionic clusters as the first inorganic-ferrocene analogues of a monovalent group 13 element with dual Lewis and Brønsted acid sites. As dual-acid catalysts, these hourglass structures efficiently catalyze a solvent-free four-component domino reaction to synthesize 1,5-benzodiazepines. This work provides a new strategy to stabilize low-valent Al(i) species using a polyoxometalate scaffold.

Monovalent aluminum(i) species was successfully stabilized using a reduced phosphomolybdate scaffold as a dual-acid catalyst for a four-component domino reaction.

Low- or sub-valence aluminum compounds are increasingly growing into a significant frontier subject in coordination and modern organic synthetic chemistry owing to their unique singlet carbene character, Lewis acid/base properties and catalytic reactivity.¹ However, low-valence aluminum(i) compounds have inherent electron deficiency and exhibit thermodynamic instability, making them prone to self-polymerization with metal–metal bonds² or disproportionation³ to metallic Al and Al(iii) species. Inspired by the special stabilizing effect of metallocene compounds, a ligand stabilization strategy has recently been undertaken to stabilize the low-valence aluminum center.^4,5 In this regard, the utilized ligand should satisfy two key criteria: (i) sufficient steric hindrance is required to inhibit monomer polymerization; and (ii) a suitable electronic effect is needed to stabilize the aluminum(i) center. A few organometallic Al(i) compounds protected by bulky organic groups have been prepared such as [(Cp*Al)₄] (Cp* = C₅Me₅),⁶ and [(CMe₃)₃SiAl₄].⁷ However, despite having the ligand effect, most of these Al(i) compounds still decompose in aqueous solutions or heating conditions. In contrast to organometallic Al(i) compounds, inorganic Al(i) structures, i.e. monomeric monohalides, only exist in gaseous form at high temperature⁸ and to the best of our knowledge, no stable inorganic Al(i) compound is known at room temperature due to thermodynamic instability. Therefore, exploring efficient strategies to synthesize stable inorganic Al(i) compounds remains highly desired but a great challenge.Polyoxometalates (POMs), a diverse family of inorganic molecular clusters based on early-transition metals (W, Mo, V, Nb, and Ta), have extensively attracted attention in research in various fields of materials science, coordination chemistry, medicinal chemistry and catalysis science.^9–11 Owing to their adjustable constituent elements and well-defined structures, POMs have been considered as promising inorganic ligands to stabilize high- and low-valent metal ions. For instance, Rompel et al.¹² reported one Keggin-type [α-CrW₁₂O₄₀]⁵⁻ anion in which a labile {Cr^IIIO₄} tetrahedral unit was assembled at the center of the cluster. Li and co-workers employed a monolacunary Keggin-type inorganic ligand to stabilize a high-valent Cu³⁺ ion.¹³ As a unique member of the POM family, the hourglass-type phosphomolybdate cluster {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ (abbr. M{P₄Mo₆}₂), consisting of two [P₄Mo^V₆O₃₁]¹²⁻ (abbr. {P₄Mo₆}₂) subunits bridged by one metal (M) center, represents a fully reduced metal-oxo cluster. With all Mo atoms in the oxidation state of (+5), a more negative charge is endowed to the cluster surface.^14,15 Such high electron density of {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ polyoxoanions provides an electron-rich local environment for the possible stabilization of unusual-valence metals. It is worth noting that the [P₄Mo^V₆O₃₁]¹²⁻ subunit presents near-planar triangular structures with the side sizes ranging from 7.50–7.92 Å (Fig. S1^†). The structural feature can supply sufficient steric hindrance to restrain the polymerization of low-valence metal species. Moreover, the six Mo atoms in each [P₄Mo^V₆O₃₁]¹²⁻ subunit arrange in a planar hexagonal-ring structure like a benzene ring, implying that such {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ clusters may have a similar delocalized electron structure to conjugated benzene or cyclopentadiene. These features make [P₄Mo^V₆O₃₁]¹²⁻ a promising candidate with respect to organic protecting groups to construct an inorganic ‘ferrocene’ analogue of Al(i) (Scheme 1). Therefore, we hypothesize that hourglass-type polyoxoanion clusters are promising to stabilize the labile Al(i) center and isolate inorganic Al(i) species.Open in a separate windowScheme 1Similar ferrocene-like sandwich structure features of an inorganic hourglass-type [Al^I(P₄Mo^V₆O₃₁)₂]²³⁻ polyanion to an organometallic [(η⁵-Cp*)₂Al^I]⁺ cation.Herein, we show a [P₄Mo^V₆O₃₁]¹²⁻ cluster as an inorganic scaffold to stabilize the Al(i) center in two hybrid compounds, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene), in which the labile Al(i) center is sandwiched by two [P₄Mo^V₆O₃₁]¹²⁻ sides, forming an inorganic moiety of a ‘ferrocene’ analogue. Both Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ are experimentally determined at room temperature for the first time, and prepared by hydrothermal reactions of Na₂MoO₄·2H₂O, H₃PO₄, AlCl₃·6H₂O, ethanol and N-containing bpe at 160 °C with slightly different pH values. Notably, the combination of ethanol, N-containing bpe and high hydrothermal temperature is a prerequisite to the isolation of Al(i) species. First, both ethanol and N-containing bpe were used to provide a reducing environment under hydrothermal conditions. By combining high temperature and pressure, sufficient energy is supplied to reduce Mo⁶⁺ and Al³⁺ ions to Mo⁵⁺ and Al⁺ species, respectively. Then, Mo⁵⁺ species and phosphoric acid molecules are assembled to form [P₄Mo₆O₃₁]¹²⁻ subunits, which are subsequently combined with Al⁺ ions to form hourglass-type [Al(P₄Mo₆O₃₁)₂]²³⁻, hence effectively stabilizing Al(i) species (Fig. 1). From the perspective of stereochemistry, two highly negative [P₄Mo₆O₃₁]¹²⁻ fragments, resembling the methyl cyclopentadiene organic group, sandwich one low-valent metal Al(i) center. Hence, the construction of a strong reducing hourglass-like skeleton makes it possible to stabilize the existing Al⁺ species.Open in a separate windowFig. 1Ball-and-stick diagram showing the assembly of the hourglass-type cluster {Al(P₄Mo₆)₂}.Single crystal X-ray diffraction revealed the hourglass-type {Al(P₄Mo₆)₂} cluster in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Table S1^†), in which the [P₄Mo₆O₃₁]¹²⁻ subunits have a C₃ symmetry and display a near-planar structure formed by six edge-sharing {MoO₆} octahedra with alternating short Mo–Mo single bonds and long non-bonding Mo⋯Mo contacts. The side sizes of the {P₄Mo₆} subunit range from 7.50–7.92 Å, which supplies sufficient steric hindrance to restrain the polymerization or disproportionation of low-valence Al(i) species. All Mo atoms are in a reduced oxidation state of +5 and the central Al atoms are in the +1 oxidation state, as confirmed by bond valence calculations (Table S2^†). Thus, the synthesized Al{P₄Mo₆}₂ represents a fully reduced metal–oxygen cluster. Moreover, the six Mo atoms in each {P₄Mo₆} subunit present a benzene-like planar hexagonal-ring structure with a similar π-type delocalization electron interaction with Al(i) instead of organic bulky groups. Such π-type delocalization electron interaction constructs an inorganic ‘ferrocene’ analogue of Al(i) and produces sufficient delocalization energy to stabilize Al(i) species. Considering the formation mechanism of traditional metallocenes, {P₄Mo₆} subunits with a similar strong electron-donating ability and suitable steric-hindrance effect on Cp rings, augment the stability of Al(i) species. Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ compounds also present the first isolation of aluminum-sandwiched hourglass-type clusters in POM chemistry. Importantly, regarding the inherent and strong hydrolysis of aluminum species in water, these low-valent Al(i)-containing clusters represent the first example of stable solid-state inorganic sub-valent Al(i) compounds at room temperature.The asymmetric structure of Al₆{P₄Mo₆}₆ consists of two crystallographically independent {Al(P₄Mo₆)₂} clusters sandwiched by central Al(1) and Al(4) atoms, two bridging [Al(H₂O)₂]³⁺ (Al(2) and Al(3)) cations and six protonated bpe cations (Fig. S2^†). Aluminum centers involve two kinds of oxidation states: the central Al(1) and Al(4) are in the +1 state, while the bridging Al(2) and Al(3) are in the +3 state. Both Al(1) and Al(4) display the six-coordinated octahedral configuration and bridge two {P₄Mo₆} subunits to form two {Al^I(P₄Mo₆)₂} clusters. The average lengths of Al–O bonds are 2.318–2.324 Å for Al(1) and Al(4) (Table S3^†), which are slightly longer than those of classic Al–O bonds (1.90 Å) for Al(2) and Al(3), but close to that of the Al–O bond in silica-supported alkylaluminum(i) composites.^16–20 The long Al–O lengths for Al(1) and Al(4) centers may be ascribed to the lower electron cloud density located at the surface of the Al(i) cation, resulting in slightly longer bonds with the surrounding oxygen donors.^5,21 Moreover, the small distorted extents (sum((d_ij − d_ave)/d_ave)²/coordination number) of {Al(1)O₆} (3.86 × 10⁻⁴) and {Al(4)O₆} (1.89 × 10⁻³) indicate that they are in regular octahedral geometry. Moreover, another structural feature of Al₆{P₄Mo₆}₆ is that {Al^I(P₄Mo₆)₂} clusters are connected by bridging [Al(H₂O)₂]³⁺ cationic fragments (Al(2) and Al(3)), forming an unusual chain-like arrangement (Fig. 2a). It is worth noting that the 1-D chain contains a large repeating monomer with the maximum spacing of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). Such a long repeating monomer is rare. Each repeating monomer has two types of symmetric systems: Al(2) in the middle of the monomer plays a center of mirror symmetry and divides the whole repeating monomer into two equidistant half-units of {–Al1–Al3–Al4–Al3–Al1–}; Al(4) in each half-unit further acts as the reverse symmetric center of two {–Al3–Al1–Al2–} subunits. The two types of symmetrical systems form the infinitely extending chain-like structure in Al₆{P₄Mo₆}₆. Since bpe is a rigid and conjugated molecular structure, an effective π⋯π stacking interaction emerges and results in a honeycomb-like supramolecular organic moiety, which accommodates these 1-D inorganic chains and stabilizes the whole Al₆{P₄Mo₆}₆ framework (Fig. S3 and S4^†).Open in a separate windowFig. 2(a) One-dimensional (1D) inorganic structure in Al₆{P₄Mo₆}₆ with a length of repeating units of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). (b) Four kinds of coordination environments of {AlO₆} octahedra, respectively (i = 1 − x, y, 0.5 − z; ii = 0.5 − x, 1.5 − y, 1 − z).Al{P₄Mo₆}₂ has a similar structure to Al₆{P₄Mo₆}₆ (Table S4^†), wherein the most obvious difference is that {Al^I[P₄Mo₆]₂} clusters exist in isolated form and interact with the surrounding protonated bpe cations via hydrogen bonding to form into a 3-D supramolecular framework (Fig. S5 and S6^†). The different peripheral environment around the {Al^I[P₄Mo₆]₂} cluster can affect its acidity and catalytic activity.The solid-state ²⁷Al NMR spectrum of Al₆{P₄Mo₆}₆ depicts two distinct resonances at δ = −22.34 and 27.33 ppm due to the octahedrally coordinated Al^III and Al^I sites, respectively (Fig. 3a), indicating two types of Al local environments in Al₆{P₄Mo₆}₆. In contrast, Al{P₄Mo₆}₂ displays only one sharp signal at δ = 7.20 ppm due to the octahedrally coordinated Al^I sites (Fig. 3b). The observed narrow peak-width corresponds to the highly symmetric charge distribution at the aluminum nucleus, similar to the ferrocene analogue [(η⁵-Cp*)₂Al^I]⁺.⁵ Noticeably, Al^I resonance in Al₆{P₄Mo₆}₆ appears at a lower magnetic field compared to Al{P₄Mo₆}₂, due to the different peripheral environment around the hourglass {Al(P₄Mo₆)₂} cluster. XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ further affirm the valence states of Al and Mo elements (Fig. S7 and Table S5^†). The Al 2p XPS profile of Al₆{P₄Mo₆}₆ reveals two peaks at 74.39 and 73.75 eV ascribed to Al^III and Al^I, respectively (Fig. 3c). The area ratio of the two peaks is close to 1 : 1, in consistence with the chemical structure of Al₆{P₄Mo₆}₆. The high-resolution Al 2p XPS spectrum of Al{P₄Mo₆}₂ displays a weaker broad peak attributed to the low amount of Al⁺ (Fig. 3d). Moreover, the structural stabilities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were investigated by soaking them in water for 24 hours. Fig. S9–S11^† show the comparison of XRD, IR and XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ before and after soaking in water. It can be found that the characteristic diffraction peaks in XRD after soaking for 24 hours still show good agreement with the simulated data (Fig. S9^†). The characterized absorption bands in IR spectra also exhibit good match with the original Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Fig. S10^†). The XPS spectra of Al₆{P₄Mo₆}₆ after soaking in water were also obtained. There is basically no change in the high-resolution spectra of Al 2p with the Al^I/Al^III atomic ratios of ca. 1 : 1 (Fig. S11^†). The spectroscopic and theoretical observations verify that the low valence Al(i) species can stably exist in the reduced phosphomolybdates in the solid state (Fig. S12 and Table S6^†). Moreover, the acidities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were measured to be 0.27 and 0.442 mmol g⁻¹, respectively, demonstrating the promising potential of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as dual-acid catalysts.Open in a separate windowFig. 3(a and b) ²⁷Al NMR spectra of solid Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂; (c and d) XPS spectra of Al in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂.The catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ was evaluated via a solvent-free four-component domino reaction for the synthesis of pharmaceutical intermediate 1,5-benzodiazepine (Table 1). With Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as catalysts, the yields of the final product 8aaa reach 83% and 75%, respectively (Table 1, entries 1 and 2). Almost no 8aaa is observed without the acid catalysts, even when the reaction is set for a long time (Table 1, entry 3). This clarifies the excellent catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. Typical Brønsted acid p-TsOH and Lewis acid AlCl₃ as control samples yield only 43% and 29% 8aaa, respectively (Table 1, entries 4 and 5), much lower than those attained by Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ catalysts. Moreover, (H₂en)₁₂[{Na_0.8K_0.2(H₂O)}₂{Na[Mo₆O₁₂(OH)₃(HPO₄)₂(PO₄)₂]₂}₂]·7H₂O^22,23 (abbr. {Na[P₄Mo₆]₂}) in contrast achieved 72% yield of 8aaa in 30 min, slower than that of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. This indicates the advantage of the unique dual-acid features of Al(i)-stabilized reduced phosphomolybdate clusters with multiple Lewis and Brønsted acid active centers, in which the synergistic effect between the Al species and reduced phosphomolybdate cluster contributes to the catalytic activity.Comparison tests of one-pot synthesis of 1,5-benzodiazepine 8aaavia a four-component domino reaction^a

High-melting bisphenol-A polycarbonate from annealing of vapor-induced crystals

Polycarbonate is known to crystallize thermally, but only slowly and to a limited (25%) extent. The melting points reported exhibit a wide variation. We have found that the melting temperature of polycarbonate may be drastically increased by employing a sequence of vapor-induced crystallization and annealing treatments. The crystals formed by the treatment with organic vapor act as a nucleation or precursor state for further crystallization into larger, more perfect lamellae. An initial peak melting temperature of 195°C has been annealed up to 239°C, and then to 295°C by a double-heat treatment. This sample is 60% crystalline, based on heat-of-fusion calculations. An equilibrium melting point of 335°C has been obtained for PC from an extrapolation of reciprocal lamellar thickness.     

沉淀法回收生物油高温馏分中的酚类物质

为了研究金属离子沉淀法对生物油高温馏分中酚类物质的回收,提高生物油中化学物质的利用率,利用气相色谱-质谱联用仪(GC-MS)从NaOH试剂浓度、反应温度和反应时间三个方面研究了镁离子对生物油中酚类物质的回收效果。结果表明,镁离子与酚类物质形成了不溶物,而且不同浓度的氢氧化钠溶液(1.0-4.0 mol/L)、不同的反应温度(25-85℃)以及不同的反应时间(5-35 min)对实验结果有着不同程度的影响。结果表明,在反应温度为25℃、氢氧化钠浓度为2.5mol/L,反应时间在20 min时为最佳反应条件。在此条件下,对生物油高温馏分中对乙基苯酚的回收率可达34.97%。     

Photoemission from tin and lead cluster anions

Photoelectrons from mass-identified jet-cooled tin and lead cluster anions (Sn _n ^? , Pb _n ^? ) are detached by ultraviolet laser light (hν=3.68 eV). The photoelectron energy spectra give the detachment energies of ground state cluster anions (electron affinities) as well as excitation energies of neutral clusters in the geometry of the anions. The energy spectra for Sn _n ^? are dominated by flat thresholds with ann-dependence similar to that of other group IV clusters. In contrast, for Pb _n ^? we find pronounced narrow lines close to threshold, generally followed by a 0.3–1.4 eV gap which indicates closed-shell behaviour of Pb _n ^? for nearly alln.     

Mesoscale model parameters from molecular cluster calculations

We present an efficient, systematic, and universal method to estimate the interaction parameters used in mesoscale simulation methods such as dissipative particle dynamics and self-consistent field methods from molecular cluster calculations. The method is based on a generalized Flory-Huggins model in which molecules, or fragments thereof, are in contact with their van der Waals surface. We sample the density of states of molecular clusters in the space spanned by the coarse-grained degrees of freedom. From here, we calculate the sum over states and free energy of the cluster at a temperature of interest by histogram reweighting. The method allows to calculate the energy and entropy contributions to the cluster free energy explicitly. For two components, we then obtain the excess free energy of mixing and the Flory-Huggins chi-parameter, and their energetic and entropic contributions. We present two applications of the method: a simple liquid mixture of hexane and nitrobenzene, and a series of polymer blends. In the case of hexane/nitrobenzene, we compare to alternative simulation methods; here we find that the energy of mixing alone is too high to explain the critical point. By including the excess entropy of mixing, however, the predicted phase behavior is in reasonable agreement with experiment. The tendency of calculations based on average energy alone to overestimate the chi-parameter is also apparent in the polymer blend calculations.     

Binary systems from quantum cluster equilibrium theory

An extension of the quantum cluster equilibrium theory to treat binary mixtures is introduced in this work. The necessary equations are derived and a possible implementation is presented. In addition an alternative sampling procedure using widely available experimental data for the quantum cluster equilibrium approach is suggested and tested. An illustrative example, namely, the binary mixture of water and dimethyl sulfoxide, is given to demonstrate the new approach. A basic cluster set is introduced containing the relevant cluster motifs. The populations computed by the quantum cluster equilibrium approach are compared to the experimental data. Furthermore, the excess Gibbs free energy is computed and compared to experiments as well.     

Vapor-induced film formation from low-Tg particles for different solvent compositions

The photon transmission method was used to study latex film formation from poly(vinyl acetate) (PVAc) particles induced by two different solvents. Films with the same latex content were prepared from PVAc particles and exposed to vapor of ethanol-water and acetone-water mixtures in various compositions. Transmitted photon intensities, Itr, from these films increased with increasing vapor exposure time. The increase in Itr is attributed to the increase in crossing density at the polymer-polymer junction. The Prager-Tirrell model was employed to obtain the back-and-forth frequency, nu, of the reptating polymer chain during film formation induced by solvent vapor. It was observed that the produced nu values increase as the solvent content is increased for both solvents. Abilities of both solvents to form films were interpreted with the solubility parameters of the solvents and the PVAc.     

Organic cluster ions from continuous-flow fast atom bombardment

Cluster ions from fast atom bombardment of liquid alcohols and nitriles were examined using a continuous-flow technique. Protonated molecular M_nH⁺ species are the dominant cluster ions observed in molecules of formula M. The abundances of the M_nH⁺ cluster ions decrease monotonically with increasing n, and within a homologous series the M_nH⁺ abundance diminishes more rapidly for higher molecular mass compounds. Reaction products (ROH)_n(H₂O)H⁺ and (ROH)_n(ROR)H⁺ are observed also in the case of alcohols, and the ion abundances decrease with increasing n. Radiation damage yields fragment ions and ionic alkyl reaction products which are captured in solvent clusters. Semi-empirical molecular orbital methods were used to examine the energetics of cluster ion formation and decomposition pathways. Metastable decomposition processes exhibit only evaporative loss of monomers, with the probability of loss increasing sharply with n. The evaporative ensemble model of Klots was used to predict the cluster size-dependent trends of metastable dissociation processes observed for alcohol and nitrile cluster ions.     

裂褶菌茵丝体各提取成份免疫生物活性研究

研究裂褶菌茵丝体的乙醇脱脂浸膏、石油醚萃取成份、乙酸乙酯萃取成缮份及糖蛋白部份对小鼠淋巴细胞的增殖作用.结果表明石油醚及糖蛋白部份对小鼠淋巴细胞的增殖具有明显的免疫抑制作用,而乙酸乙酯与乙醇部份既有免疫抑制,又有免疫增强作用.