Determination of Cu, Zn and Cd in water by FAAS after preconcentration by baker’s yeast (Saccharomyces cerevisiae) immobilized on sepiolite

By using the adsorbent Saccharomyces cerevisiae immobilized on sepiolite an adsorption-elution method was developed for the preconcentration of Cu, Zn, and Cd followed by flame atomic absorption spectrometry (FAAS). Recoveries were 98.3 ± 0.4% for Cu, 94.2 ± 0.3% for Zn, and 99.04 ± 0.04% for Cd at 95% confidence level obtained by the column method. The influence of sea water matrix elements on the separation of the trace elements was also assessed by using the column procedure. The breakthrough capacities were found to be 74 μmol/g for copper, 128 μmol/g for zinc and 97 μmol/g for cadmium. After optimization the proposed method was applied to the trace metal determination in sea and river water.     

Comparative adsorption of methylene blue by magnetic baker’s yeast and EDTAD-modified magnetic baker’s yeast: Equilibrium and kinetic study

Magnetic baker’s yeast (MB) was prepared using glutaraldehyde cross-linking method and chemical modification with ethylenediaminetetraacetic dianhydride (EDTAD). The fabricated EDTAD-modified magnetic baker’s yeast (EMB) was then employed to remove methylene blue. Comparative adsorption of methylene blue by EMB and MB was systematically investigated with respect to pH, contact time, initial concentration and reaction temperature. The mechanism of methylene blue adsorption by EMB and MB was investigated by SEM, FTIR and Special surface area using methylene blue method. The results revealed that Fe₃O₄ nanoparticles were steadily cross-linked/incorporated with baker’s yeast biomass and the EDTA was modified on the surface of the magnetic baker’s yeast. The equilibrium adsorption data were fitted better by Langmuir isotherm, and the specific surface areas were 42.953–226.07 m²/g for MB and 94.972–499.85 m²/g for EMB, respectively. Kinetic studies suggested that the pseudo-second-order model was suitable to describe the adsorption process. Thermodynamic studies indicated that the adsorption was feasible, spontaneous and endothermic. The recovery efficiencies were above 80% by using 0.1 M HCl.     

Efficient kinetic resolution of (±)-4-methyl-Hajos–Parrish ketone by baker’s yeast reduction

Kinetic resolution of (±)-4-methyl-Hajos–Parrish ketone (±)-2a using baker’s yeast reduction was investigated. The reaction rate and enantiomeric purity depended on the concentration of substrate and yeast. Under concentrated conditions, (−)-2a and the alcohol (+)-3 were obtained in high enantiomeric excess.     

Vortex-assisted magnetic solid phase extraction of Cd(II), Cu(II) and Pb(II) on the Nitroso–R salt impregnated magnetic Ambersorb 563 for their separation,preconcentration and determination by FAAS

A novel vortex-assisted magnetic solid phase extraction method followed by flame atomic absorption spectrometry was improved to separate, preconcentrate and determine the lead, copper and cadmium ions by using 1-Nitro-2-naphthol-3, 6-disulfonic acid disodium salt (Nitroso-R salt) impregnated magnetic Ambersorb-563 resin. The adsorbent was characterised by Fourier transform infrared spectra, BET surface analyser and scanning electron microscopy. The influences of various analytical parameters, such as pH value, type and volume of the eluent, sample volume, were optimised and the effects of potentially interfering ions were investigated. The analyte ions were quantitatively recovered at pH 7.0 on magnetic adsorbent and desorbed with a 2.0 M HNO₃ in 10% acetone as eluent. The detection limits were 1.4, 5.8 and 1.5 ng mL^?1 for Cd(II), Cu(II) and Pb(II), respectively. The method has been validated with analytically by the analysis certified reference materials and standard additions prior to application to determine metal ions in water samples.     

Simultaneous separation and preconcentration of ultra-trace of Cu(II), Pb(II) and Zn(II) in water samples by air-assisted liquid–liquid microextraction prior to determination by graphite furnace atomic absorption spectrometry

A simple, rapid and efficient method has been developed for the extraction, preconcentration and determination of copper, lead and zinc ions in water samples by air-assisted liquid–liquid microextraction coupled with graphite furnace atomic absorption spectrometry (GFAAS). In the proposed method, much less volume of an organic solvent (in the order of some µL) was used as the extraction solvent in the absence of disperser solvent. Fine organic droplets were formed by sucking and injecting of the mixture of aqueous sample solution and extraction solvent with a syringe for several times in a conical test tube. After extraction, phase separation was achieved by centrifugation and the enriched analytes in the sedimented phase were determined by GFAAS. Several variables potentially affecting the extraction efficiency were investigated and optimized. Calibration graphs were linear in the concentration range of 45.0–1100 ng L^?1. Detection limits were in the range of 18.0–26.0 ng L^?1. The accuracy of the developed procedure was checked by analyzing NRCC-SLRS4 Riverine water as a certified reference material. Finally, the proposed method was successfully applied to determine the selected heavy metals in tap, surface and river water samples.     

Study of the kinetic parameters for synthesis and hydrolysis of pharmacologically active salicin isomer catalyzed by baker’s yeast maltase

One of the key elements for understanding enzyme reactions is determination of its kinetic parameters. Since transglucosylation is kinetically controlled reaction, besides the reaction of synthesis, very important is the reaction of enzymatic hydrolysis of created product. Therefore, in this study, kinetic parameters for synthesis and secondary hydrolysis of pharmacologically active α isosalicin by baker’s yeast maltase were calculated, and it was shown that specifity of maltase for hydrolysis is approximately 150 times higher then for synthesis.     

Determination of rare earth elements in natural water samples – A review of sample separation,preconcentration and direct methodologies

This review discusses and compares the methods given for the determination of rare earth elements (REE) in natural water samples, including sea, river, lake, tap, ground and waste waters as well as Antarctic ice. Since REE are at very low concentrations in natural waters, numerous different preconcentration methods have been proposed to enable their measurement. These include liquid liquid extraction, dispersive liquid-liquid micro-extraction and solidified floating drop micro-extraction. In addition to liquid-liquid extraction methods, solid phase extraction using commercial resins, resins made in-house, silica-based exchange materials and other solid media is also discussed. These and other techniques such as precipitation/co-precipitation and flotation are compared in terms of speed, preconcentration factors achieved, precision, accuracy and limits of detection (LOD). Some papers have discussed the direct determination of REE in these sample types. Some have used specialised sample introduction systems such as ultrasonic nebulization whereas others have used a standard sample introduction system coupled with inductively coupled plasma mass spectrometry (ICP-MS) detection. These direct methods have also been discussed and compared.     

Determination of Pb(II) and Cu(II) by Electrothermal Atomic Absorption Spectrometry after Preconcentration by a Schiff Base Adsorbed on Surfactant Coated Alumina

1,2-Bis（salicylidenamino）ethane loaded onto sodium dodecyl sulfate-coated alumina was used as a new chelating sorbent for the preconcentration of traces of Pb（Ⅱ） and Cu（Ⅱ） prior to atomic absorption spectrometric determination. The influence of pH, flow rates of sample and eluent solutions, and foreign ions on the recovery of Pb（Ⅱ） and Cu（Ⅱ） by this sorbent has been studied. The retained ions were eluted with 4 mol·L nitric acid and determined by electrothermal atomic absorption spectrometry （ETAAS）. The data of limit of detection （3σ） for Pb（Ⅱ） and Cu（Ⅱ） were found to be 8.57 and 2.69 ng·L^-1 respectively, while the enrichment factor for both ions was 100. The proposed method was successfully applied to determination of lead and copper in different water samples.     

Structural diversity of isothiocyanato Cd(II) and Zn(II) Girard’s T hydrazone complexes in solution and solid state: effect of H-bonding on coordination number and supramolecular assembly of Cd(II) complex in solid state

The isothiocyanato Zn(II) complex (1) and mixed isothiocyanato/thiocyanato Cd(II) complex (2) with the condensation product of 2-acetylpyridine and trimethylammoniumacetohydrazide chloride (Girard’s T reagent) (HLCl) were investigated both experimentally and theoretically. The crystal structures of both complexes showed tridentate N₂O coordination of hydrazine ligand. In complex 1 square-pyramidal coordination surrounding of Zn(II) consists of deprotonated hydrazone ligand and two isothiocyanato ligands, while in octahedral Cd(II) complex ligand is coordinated without deprotonation as a positively charged species and coordination geometry is completed with two N-coordinated and one S-coordinated NCS^? anions. NMR spectroscopy and molar conductivity results for Cd(II) and Zn(II) complexes indicated their instability in solution. DFT calculations were performed to explain coordination preference and stability of complexes 1 and 2 in solid state and in solution. The obtained Cd(II) complex is the first reported mononuclear pseudohalide/halide Cd(II) complex with quinoline-/pyridine-based hydrazone ligands possessing octahedral geometry in solid state. In this complex, H-bonding has significant impact on coordination number and supramolecular assembly in solid state.     

Application of Short Sequential Extraction Procedure（SSEP） for the Determination of Zn, Cu, and Cd Contents in Riverbed Sludge in Hejiagou, Harbin, China

IntroductionThe environment is contaminated by high concen-trations of metals from different sources such as conta-minated soils[1—10], sediments[11—15], and sewage orindustrial sludge[16—20]. However, there has been noreport on the determination of he…     

Determination of Cu,Cd, Ni,Pb and Zn in Edible Oils Using Reversed-Phase Ultrasonic Assisted Liquid–Liquid Microextraction and Flame Atomic Absorption Spectrometry

A simple and green reversed-phase ultrasonic assisted liquid?liquid microextraction method for determination of Cu, Cd, Ni, Pb and Zn in edible oils was developed. Detection was carried out by flame atomic absorption spectrometry. The influence of main parameters including ultrasonic time and temperature, disperser solvent, volume of extracting solvent and centrifuging time on the extraction efficiency of target analytes were investigated and optimized. In the proposed method, a few microliters of water (containing 3%, v/v, nitric acid) as extracting solvent was injected into the oil sample and mixture transferred to ultrasonic bath. Then, the mixture was centrifuged in order to accelerate in phase separation. Finally, the aqueous phase was removed and delivered to flame atomic absorption spectrometer. Calibration curves for all metals were linear in the range of 5?100 ng/mL. The limit of detections for Cu, Cd, Ni, Pb and Zn were 0.8, 0.3, 0.5, 1.5 and 0.5 ng/mL, respectively. Relative standard deviation (RSD) values were in the range of 0.6?1.9%. The recoveries were in the range of 95.2–101.2% with RSD values ranging from 0.8 to 1.9%. The proposed method was applied successfully for the determination of interested metals in commercial edible oils.     

A highly selective magnetic solid-phase extraction method for preconcentration of Cd(II) using N,N′-bis(salicylidene)ethylenediamine in water and food samples

Research on Chemical Intermediates - In this work, a highly selective method is presented for the preconcentration of cadmium. The developed magnetic solid-phase extraction is based on the...     

Synthesis,Characterization and Thermal Behavior of Complexes of Cu(II), Zn(II) and Cd(II) with S,S′-Methylenebis(Cysteine)

Synthesis and characterization, including data on thermal decomposition, are reported for the complexes of S,S'-methylenebis(cysteine) (djenkolic acid) with copper(II), zinc(II) and cadmium(II): CuC₇H₁₂N₂O₄S₂ [I]; ZnC₇H₁₂N₂O₄S₂ [II] and CdC₇H₁₂N₂O₄S₂ [III]. X-ray diffraction showed that the compounds are isostructural and belong to a monoclinic system. According to IR spectra, COO, NH₂ groups and bridging sulfur atoms are the main coordination sites.     

Syntheses and Anti-lung Cancer Activities of Zn(Ⅱ) and Cu(Ⅱ) Complexes Based on Triazole and Tetrazole,respectively

The reactions of 4H-1,2,4-triazole(Htrz) with ZnCl_2, 1H-tetrazole(Htez) and Cu(NO_3)2·6H_2O afford two novel coordination polymers respectively, {[Zn_2(trz)_2(ox)](H_2O)_3}n(1) and {[Cu_3(tez)_3(OH)_2(H_2O)_2](NO_3)(DMF)_4}_n(2)(H_2ox =(COOH_)2, DMF = N,N-dimethylformamide). 1 shows 1D channels along the a axis filled with water molecules and 2 features a 2D bi-layered framework based on trinuclear Cu(II) units bridged by two μ3-OH groups. In addition, in vitro antitumor activities of compounds 1 and 2 on four human lung cancer cells(16HBE, NCI-H1299, NCI-H460 and NCI-H292) were further determined.     

Separation,preconcentration and determination of Pb(Ⅱ) in water samples using microcrystalline triphenylmethane loaded with quinolin-8-olate

This paper described a novel method for the preconcentration of Pb(Ⅱ) using microcrystalline triphenylmethane loaded with quinolin-8-olate prior to the determination by flame atomic absorption spectrometry.Pb(Ⅱ) could be enriched by controlling appropriate condition.The preconcentration factor could reach to 200 and the detection limit of Pb(Ⅱ) was 0.074μg/L.The recovery was in a range of 93.5-103%with relative standard deviation of 1.0-2.2%.The proposed method had been successfully applied to the determ...     

Extractive biocatalysis in the asymmetric reduction of α-alkyl, β-aryl enones by Baker’s yeast

We prepared various chiral α-alkyl, β-aryl ketones with good to excellent enantiomeric excess through the Baker’s yeast asymmetric double-bond reduction of the corresponding α,β-unsaturated substrates adsorbed onto the resin Amberlite XAD-7. This methodology was compatible with substrates bearing both electron-donating and withdrawing groups attached to the aromatic ring. Elongation of the α-alkyl substituent of the starting material strongly affected the reactivity and enantioselectivity of the reaction.     

Determination of total selenium and selenium distribution in the milk phases in commercial cow’s milk by HG-AAS

A procedure has been developed for determining the selenium in cows milk using hydride generation–atomic absorption spectrometry (HG-AAS) following microwave-assisted acid digestion. The selenium distributions in milk whey, fat and micellar casein phases were studied after separating the different phases by ultracentrifugation and determining the selenium in all of them. The detection limits obtained by HG-AAS for the whole milk, milk whey and micellar casein were 0.074, 0.065 and 0.075 g l^–1, respectively. The accuracy for the whole milk was checked by using a Certified Reference Material CRM 8435 whole milk powder from NIST, and the analytical recoveries for the milk whey and casein micelles were 100.9 and 96.9%, respectively. A mass balance study of the determination of selenium in the different milk phases was carried out, obtaining values of 95.5–100.8%. The total content of selenium was determined in 37 milk samples from 15 different manufacturers, 19 whole milk samples and 18 skimmed milk samples. The selenium levels found were within the 8.5–21 g l^–1 range. The selenium distributions in the different milk phases were studied in 14 whole milk samples, and the highest selenium levels were found in milk whey (47.2–73.6%), while the lowest level was found for the fat phase (4.8–16.2%). A strong correlation was found between the selenium levels in whole milk and the selenium levels in the milk components.     

Screening of dissolved heavy metals (Cu,Zn, Mn,Al, Cd,Ni, Pb) in seawater by a liquid-membrane–ICP–MS approach

A bulk liquid membrane system has been developed and applied to the simultaneous separation and preconcentration of up to seven heavy metals (copper, zinc, lead, cadmium, aluminium, manganese, and nickel) in seawater. Copper was selected to optimize transport conditions and then, under these conditions, the simultaneous extraction of other heavy metals was studied. The system achieved preconcentration yields ranging between 44.11% (Cd) and 77.77% (Cu) after nine hours of operation, the effectiveness of metal transport being Cu > Zn > Pb > Mn > Ni > Al > Cd. The system was applied to the preconcentration of four real seawater samples before their quantification by inductively coupled plasma–mass spectrometry (ICP–MS). Compared with the analytical procedures commonly used for trace metal determination in oceanography, the results obtained demonstrated that the new system may be used as a very clean (sample contamination-free), simple, and one-step alternative for semiquantitative, and even quantitative, simultaneous determination of heavy metals in seawater.     

Determination of drugs of abuse in water by solid-phase extraction,derivatisation and gas chromatography–ion trap-tandem mass spectrometry

An alternative method for the sensitive determination of several drugs of abuse and some of their metabolites in surface and sewage water samples is proposed. Analytes are concentrated using a solid-phase extraction (SPE) sorbent, converted into the corresponding trimethylsilyl derivatives and selectively determined by gas chromatography (GC) with tandem mass spectrometry (MS/MS) detection. Parameters affecting the performance of extraction, derivatisation and determination steps are systematically investigated. Moreover, the stability of target analytes in sewage water samples is discussed. Under final working conditions, water samples were adjusted at pH 8.5 and concentrated using a 200 mg OASIS HLB SPE cartridge. Analytes were sequentially eluted with ethyl acetate followed by acetone and silylated using N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA). The reaction was completed in 60 min at 80 °C and the mixture injected directly in the GC–MS/MS system without further purification. In most cases, analytes presented a poor stability in sewage water samples; however, once they are submitted to the SPE process, cartridges can be stored at −20 °C for at least 3 months without significant degradation and/or inter-conversion reactions of illicit drugs. The proposed method provided recoveries over 74% and LODs between 0.8 and 15 ng/L for river and treated wastewater samples. In the case of raw wastewater slightly worse recoveries, between 63 and 137%, and similar LODs were attained. Analysis of a limited number of waste and surface water samples confirmed the presence of several illicit drugs in the aquatic environment, with the highest levels and frequency corresponding to benzoylecgonine, the main metabolite of cocaine.     

Improvement on Simultaneous Determination of Cr(III) and Cr(VI) by Capillary Electrophoresis and Chemiluminescence Detection

Chromiumexistsindifferentoxidationstatesingroundwater,industrialwastewater,seawater,andsoilofourenvironment1,2.Chromium(III)isanessentialtraceelementforhumans,requiredforthemaintenanceofnormalglucose,cholesterol,andfattyacidmetabolism.Ontheotherhand,watersolublechromium(VI),intheformCr2O72-orCrO42-,ishighlyirritatingandtoxictohumansandanimals3.Itsacutetoxiceffectsincludeanimmediatecardiovascularshockandlatereffectsonkidney,liver,andblood-formingorgans.Therefore,itisnecessaryforriskassessme…