Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Synthesis and characterization of Sr3Al2O6：Eu2＋, Dy3＋ phosphors prepared by sol-gel-combustion processing

A type of red luminescent Sr3Al2O6:Eu2+, Dy3+ phosphor powder is synthesised by sol-gel-combustion processing, with metal nitrates used as the source of metal ions and citric acid as a chelating agent of metal ions. By tracing the formation process of the sol-gel, it is found that it is necessary to reduce the amount of NO3- by dropping ethanol into the solution for forming a stable and homogeneous sol-gel. Thermogravimetric and Differential Scanning Calorimeter Analysis, x-ray diffractionmeter, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the luminescent properties of the as-synthesised Sr3Al2O6:Eu2+, Dy3+. The results reveal that the Sr3Al2O6 crystallises completely when the combustion ash is sintered at 1250 C. The excitation and the emission spectra indicate that the excitation broadband lies mainly in a visible range and the phosphors emit a strong light at 618 nm under the excitation of 472 nm. The afterglow of (Sr0.94Eu0.03Dy0.03)3Al2O6 phosphors sintered at 1250 ℃ lasts for over 1000 s when the excited source is cut off.     

Phosphorescent and thermoluminescent properties of SrAl2O4:Eu,Dy phosphors prepared by solid state reaction method

Long persistent SrAl₂O₄:Eu²⁺ phosphors co-doped with Dy³⁺ were prepared by the solid state reaction method. The main diffraction peaks of the monoclinic structure of SrAl₂O₄ were observed in all the samples. The broad band emission spectra at 497 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ were observed and the emission is attributed to the 4f⁶5d¹ to 4f⁷ transition of Eu²⁺ ions. The samples annealed at 1100–1200 °C showed similar broad TL glow curves centered at 120 °C. The similar TL glow curves suggest that the traps responsible for them are similar. The long afterglow displayed by the phosphors annealed at different temperatures, may be attributed to the Dy³⁺ ions acting as the hole trap levels, which play an important role in prolonging the duration of luminescence.     

Synthesis and luminescence properties of needle-like SrAl2O4:Eu, Dy phosphor via a hydrothermal co-precipitation method

Needle-like SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had been prepared by calcining the precursors obtained from hydrothermal process at the temperature of 1100 °C in a weak reductive atmosphere of active carbon. The crystal structure, morphology and optical properties of the composites were characterized. X-ray diffraction (XRD) patterns illustrated that the single-phase SrAl₂O₄ was formed at 1100 °C, which is much lower than that prepared by the traditional method. The transmission electron microscope (TEM) observation revealed the precursors and the resulted SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had well-dispersed distribution and needle-like morphology with an average diameter about 150 nm at the center and the length up to 1 μm. After irradiation by ultraviolet radiation with 350 nm for 5 min, the phosphors emit green color long-lasting phosphorescence corresponding to the typical emission of Eu²⁺ ion, both the PL spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties.     

Synthesis and luminescence properties of YVO4:Eu,Bi phosphor with enhanced photoluminescence by Bi doping

YVO₄:Eu³⁺,Bi³⁺ phosphors have been prepared by the high-temperature solid-state (HT) method and the Pechini-type sol-gel (SG) method. Spherical SiO₂ particles have been further coated with YVO₄:Eu³⁺,Bi³⁺ phosphor layers by the Pechini-type SG process, and it leads to the formation of core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ phosphors. Therefore, the phase formations, structures, morphologies, and photoluminescence properties of the three types of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors were studied in detail. The average diameters for the phosphor particles are 2-4 μm for HT method, 0.1-0.4 μm for SG method, and 0.5 μm for core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ particles, respectively. Photoluminescence spectra show that effective energy transfer takes place between Bi³⁺ and Eu³⁺ ions in each type of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors. Introduction of Bi³⁺ into YVO₄:Eu³⁺ leads to the shift of excitation band to the long-wavelength region, thus the emission intensities of ⁵D₀-⁷F₂ electric dipole transition of Eu³⁺ at 615 nm upon 365 nm excitation increases sharply, which makes this phosphor a suitable red-emitting materials that can be pumped with near-UV light emitting diodes (LEDs).     

A survey of phosphors novel for thermography

With regard to phosphor thermometry, seven luminescent ceramic materials were synthesised and characterised, namely CaMoO₄:Eu³⁺, CaTiO₃:Pr³⁺, LaPO₄:Eu³⁺, LaVO₄:Eu³⁺, LiAl₅O₈:Fe³⁺, TiMg₂O₄:Mn⁴⁺ and ZnGa₂O₄:Mn²⁺. In this context, emission spectra and temperature lifetime characteristics are presented. Thus, a survey of phosphors novel for thermography is given in order to encourage further studies and more detailed characterisations of the respective materials.     

Synthesis and luminescence properties of SrAl2O4:Eu,Dy nanosheets

We report an effective method to synthesize SrAl₂O₄:Eu²⁺,Dy³⁺ nanosheets. Sheet-like precursors were firstly synthesized by the solvothermal method, and acetate was used as the raw material. Then the final products were obtained by calcinating the precursor in a weak reductive atmosphere of H₂. The crystal structure and particle morphology were investigated by X-ray diffraction (XRD) patterns, field-emission scanning electron microscopy and transmission electron microscopy (FE-SEM and TEM) , respectively. A possible growth mechanism was proposed to reveal the formation process. Luminescence properties of the SrAl₂O₄:Eu²⁺,Dy³⁺ long-lasting phosphor were analyzed by measuring the excitation spectra, the emission spectra, the afterglow decay curve and the thermoluminescence curve. Both the photoluminescence (PL) spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties compared with the phosphors prepared by using nitrates as the raw material. Furthermore, the photoluminescence intensity was even a little higher than commercial phosphors.     

Y2O3: Eu,Dy的制备与红色长余辉发光性能研究

采用高温固相法合成发光样品Y₂O₃：Eu³⁺_0.01和Y₂O₃：Eu³⁺_0.01,Dy³⁺_0.01.X射线衍射分析(XRD)表明样品保持Y₂O₃晶格结构,掺入的Eu³⁺和Dy³⁺对Y_{2关键词： 长余辉 2}O₃')" href="#">Y₂O₃ 稀土掺杂 陷阱     

Dy含量对红色长余辉发光材料Sr3Al2Ｏ6:Eu2＋,Dy3＋性能的影响

采用溶胶凝胶法制备了Sr₃Al₂Ｏ₆:Eu^2＋,Dy^3＋红色长余辉发光材料,利用X射线衍射仪对材料的物相进行了分析,结果表明,1200℃下制备的样品的物相为Sr₃Al₂Ｏ₆,少量的Eu和Dy掺杂没有影响样品的相组成.采用荧光分光光度计、照度计测定了样品的发光特性.结果表明Sr₃Al₂Ｏ关键词： 红色长余辉 3Al₂Ｏ₆')" href="#">Sr₃Al₂Ｏ₆ 溶胶凝胶法     

Enhanced luminescent properties of long-persistent Sr2MgSi2O7:Eu, Dy phosphor prepared by the co-precipitation method

Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were prepared by the (aminopropyl)-triethoxysilane (APTES) co-precipitation method. Effects of synthesis temperature on the crystal characteristics, luminescent properties and afterglow performance of Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors have been discussed in detail and compared with the corresponding commercial product. The experimental results indicated that the sample could be synthesized at a relatively lower temperature and had better performance on the above-mentioned properties using the co-precipitation method.     

Influence of co-doping different rare earth ions on CaGa2S4: Eu, RE(RE=Ln) phosphors

Photoluminescent phosphors CaGa₂S₄: Eu²⁺, RE³⁺ (RE³⁺ including all rare earth ions except for Sc³⁺, Pm³⁺, Eu³⁺ and Lu³⁺) were prepared by sintering at high temperature in a reductive atmosphere, and their luminescent properties were studied intensively. The influences of co-doping rare earth ions on their luminescent properties were also investigated. No remarkable differences were found from excitation spectra of co-doped phosphors CaGa₂S₄: Eu²⁺, RE³⁺ in contrast with that of phosphor CaGa₂S₄: Eu²⁺, but there were a few differences in emission spectra of Ce³⁺, Pr³⁺ or Ho³⁺ co-doped phosphors. Phosphors CaGa₂S₄: Eu²⁺, RE³⁺ (RE=Ce, Pr, Gd, Tb, Ho and Y) had persistent afterglow, and very short afterglow was shown for Nd³⁺ or Er³⁺ co-doped phosphors, but no long afterglow appeared when auxiliary activator was La³⁺, Sm³⁺, Dy³⁺, Tm³⁺ or Yb³⁺. Among the phosphors with long-lasting phosphorescence, in our experiments, CaGa₂S₄: Eu²⁺, Ho³⁺ had the longest and the highest brightness long yellow afterglow. Thermo-luminescence of all co-doped phosphors was measured to find the answer of different influences from different rare earth auxiliary activators.     

Fabrication,structure, and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C encapsulated with YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> composites

The use of carbon shells offers many advantages in surface coating or surface modification due to their surface with activated carboxyl and carbonyl groups. In this study, the Fe₃O₄@C@YVO₄:Eu³⁺ composites were prepared through a simple sol–gel process. Reactive carbon interlayer was introduced as a key component, which separates lanthanide-based luminescent component from the magnetite, more importantly, it effectively prevent oxidation of the Fe₃O₄ core during the whole preparation process. The morphology, structure, magnetic, and luminescent properties of the composites were characterized by transmission electron microscopy (TEM), high-resolution TEM, X-ray diffraction, X-ray photoelectron spectra, VSM, and photoluminescent spectrophotometer. As a result, the Fe₃O₄@C/YVO₄:Eu³⁺ composites with well-crystallized and core–shell structure were prepared and the YVO₄:Eu³⁺ luminescent layer decorating the Fe₃O₄@C core–shell microspheres are about 10 nm. In addition, the Fe₃O₄@C@YVO₄:Eu³⁺ composites have the excellent magnetic and luminescent properties, which allow them great potential for bioapplications such as magnetic bioseparation, magnetic resonance imaging, and drug/gene delivery.     

Influence of γ-radiation on photoluminescence properties of YPO4:Eu3+,Ce3+ and YPO4:Dy3+,Ce3+ phosphors

Hexagonal YPO₄ phosphors doped with Eu³⁺/Dy³⁺ and co-doped with Ce³⁺ were synthesized by a hydrothermal route assisted using lauric acid as a capping agent. The prepared phosphors were characterized by transmission electron microscopy, infrared spectroscopy, powder X-ray diffraction and photoluminescence spectra. YPO₄: Eu³⁺ gives two red emission peaks at 587 and 610?nm corresponding to ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions, respectively. YPO₄: Dy³⁺ exhibits two emission peaks at 485?nm (blue) and 575?nm (yellow) corresponding to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions, respectively. Ce³⁺ ions enhanced the emission intensity as a co-dopant in both phosphors. Moreover, the effect of γ-radiation in the dose range 5–300?kGy on the photoluminescence behaviour of YPO₄:Eu³⁺,Ce³⁺ and YPO₄:Dy³⁺,Ce³⁺ was also investigated. Quenching of emission intensity, after irradiation at 5 and 300?kGy, was observed in both the phosphors due to loss of excess energy through a non-radiative relaxation process.     

Photoluminescence and phosphorescence properties of MAl2O4:Eu, Dy (M=Ca, Ba, Sr) phosphors prepared at an initiating combustion temperature of 500 °C

Eu²⁺ and Dy³⁺ co-doped calcium aluminate, barium aluminate and strontium aluminate phosphors were synthesized at an initiating combustion temperature of 500 °C using urea as an organic fuel. The crystallinity of the phosphors was investigated by using X-ray diffraction (XRD) and the morphology was determined by a scanning electron microscope (SEM). The low temperature monoclinic structure for both CaAl₂O₄ and SrAl₂O₄ and the hexagonal structure of BaAl₂O₄ were observed. The effect of the host materials on the photoluminescence (PL) and phosphorescence properties were investigated by using a He-Cd Laser and a Cary Eclipse fluorescence spectrophotometer, respectively. The broad band emission spectra observed at 449 nm for CaAl₂O₄:Eu²⁺, Dy³⁺, 450 nm (with a shoulder-peak at 500 nm) for BaAl₂O₄:Eu²⁺, Dy³⁺ and 528 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ are attributed to the 4f⁶5d¹ to 4f⁷ transition in the Eu²⁺ ion in the different hosts.     

Luminescence studies on SrMgAl10O17:Eu, Dy phosphor crystals

Using urea as fuel, SrMgAl₁₀O₁₇:Eu, Dy phosphor was prepared by a combustion method. Its luminescence properties under ultraviolet (UV) excitation were investigated. Pure SrMgAl₁₀O₁₇ phase was formed by urea-nitrate solution combustion synthesis at 550 °C. The results indicated that the emission spectra of SrMgAl₁₀O₁₇:Eu, Dy has one main peak at 460 nm and one shoulder peak near 516 nm, which are ascribed to two different types of luminescent Eu²⁺ centers existing in the SrMgAl₁₀O₁₇ matrix crystal. The blue luminescence emission of SrMgAl₁₀O₁₇:Eu phosphors was improved under UV excitation by codoping Dy³⁺ ions. The SrMgAl₁₀O₁₇:Eu phosphors showed green afterglow (λ=516 nm) when Dy³⁺ ions were doped. Dy³⁺ ions not only successfully play the role of sensitizer for energy transfer in the system, but also act as trap levels and capture the free holes in the spinel blocks.     

Luminescent characteristics of LiCaBo3:M (M=Eu, Sm, Tb, Ce, Dy) phosphor for white LED

LiCaBO₃:M (M=Eu³⁺, Sm³⁺, Tb³⁺, Ce³⁺, Dy³⁺) phosphors were synthesized by a normal solid-state reaction using CaCO₃, H₃BO₃, Li₂CO₃, Na₂CO₃, K₂CO₃, Eu₂O₃, Sm₂O₃, Tb₄O₇, CeO₂ and Dy₂O₃ as starting materials. The emission and excitation spectra were measured by a SHIMADZU RF-540 UV spectrophotometer. And the results show that these phosphors can be excited effectively by near-ultraviolet light-emitting diodes (UVLED), and emit red, green and blue light. Consequently, these phosphors are promising phosphors for white light-emitting diodes (LEDs). Under the condition of doping charge compensation Li⁺, Na⁺ and K⁺, the luminescence intensities of these phosphors were increased.     

Green,blue, red,near-infrared up-conversion luminescence of Yb<Superscript>3+</Superscript>/Er<Superscript>3+</Superscript>/Tm<Superscript>3+</Superscript> co-doped YVO<Subscript>4</Subscript> nanoparticles

YVO₄:Yb³⁺,Er³⁺; YVO₄:Yb³⁺,Tm³⁺; and YVO₄:Yb³⁺,Er³⁺,Tm³⁺ were all synthesized via sol-gel method with a subsequent thermal treatment. Specifically, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ phosphors were prepared with different annealing temperatures to study the influence of temperature. The transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescent (PL) spectrofluorometer were used to investigate the morphology, crystal structure, and up-conversion luminescent properties of all samples. In summary, all samples were granular-like nanoparticles and well crystallized with the same tetragonal phase as YVO₄. Under the irradiation at 980 nm, YVO₄:Yb³⁺,Er³⁺ phosphors can generate green emission at 525 and 553 nm and red emission at 657 nm, while YVO₄:Yb³⁺,Tm³⁺ phosphors can generate blue emission at 476 nm, red emission at 648 nm, and near-infrared emission at 800 nm. Notably, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ samples can exhibit green emission, blue emission, red emission, and near-infrared emission at the same time, which might endow the as-prepared samples with potential applications in many fields, such as luminous paint, infrared detection, and biological label.     

Eu3+ emission in SrAl2B2O7 based phosphors

Eu³⁺ doped SrAl₂B₂O₇ phosphors were fabricated by the wet method. The structures of the phosphors were characterized by XRD. The doping content of Eu³⁺ ions in SrAl₂B₂O₇:Eu³⁺ phosphors are 1%, 4%, 6%, 8%, 10% (molar fraction), respectively. Luminescence properties were analyzed by measuring the excitation and photoluminescence spectra. The luminescent properties of SrAl₂B₂O₇:Eu³⁺ phosphors are discussed. It is shown that from 4% to 6% of doping content of Eu³⁺ ions under 392 nm excitation in SrAl₂B₂O₇:Eu³⁺ phosphors is optimum.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.     

Sr2CeO4:Eu and Sr2CeO4:5 mol% Eu, 3 mol% Dy microphosphors: Wet chemistry synthesis from hybrid precursor and photoluminescence properties

In this article, Sr₂CeO₄:x mol% Eu³⁺ and Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors were synthesized from assembling hybrid precursors by wet chemical method. As-prepared samples present uniform grain-like morphology and the particle size is about 0.2 μm. The luminescence spectra of Sr₂CeO₄:x mol% Eu³⁺ have been measured to examine the influence of the intensity of red emission lines for Eu³⁺ on the concentration of Eu³⁺, showing that the intensity of the red emission increases with an increase of the concentration from 1 to 5 mol%. Additionally, from the emission spectra of Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors, the characteristic lines of Dy³⁺ have also been observed. This result indicates that there also exists an energy transfer process between Sr₂CeO₄ and Dy³⁺.