Noncovalent attachment of oxide nanoparticles onto carbon nanotubes using water-in-oil microemulsions

We report a simple and general noncovalent method for attaching ZnO and MgO nanoparticles onto MWNTs using water-in-oil microemulsions, which is important for preserving the mechanical and electrical properties of carbon nanotubes.     

Noncovalent engineering of carbon nanotube surfaces by rigid,functional conjugated polymers

We report a new nonwrapping approach to noncovalent engineering of carbon nanotube surfaces by short, rigid functional conjugated polymers, poly(aryleneethynylene)s. Our technique not only enables the dissolution of various types of carbon nanotubes in organic solvents, which represents the first example of solubilization of carbon nanotubes via pi-stacking without polymer wrapping, but could also introduce numerous neutral and ionic functional groups onto the carbon nanotube surfaces.     

Noncovalent interactions of free-base phthalocyanine with elongated fullerenes as carbon nanotube models

Noncovalent interactions of free-base phthalocyanine (H₂Pc) with closed-cap armchair (5,5) and zigzag (10,0) single-walled carbon nanotubes (ANT and ZNT, respectively), as well as, for comparison, with C₆₀ and C₈₀(I _h) fullerenes, whose hemispheres were used to close the ends of nanotube models, were studied theoretically by using one pure dispersion-corrected GGA functional (PBE with a long-range dispersion correction by Grimme, or PBE+D) and two hybrid meta exchange-correlation functionals (M05-2X and M06-2X). Strong complexation was observed in all four systems studied. The general trend found is that the interaction strength increases with the size (number of C atoms) of carbon nanocluster, that is, in the order of ZNT > ANT > C₈₀ > C₆₀. Depending on the DFT functional employed, the interaction strength decreased in the order of PBE+D > M06-2X > M05-2X. A common feature for the geometry of all four complexes considered, reproduced in all the calculations, is that H₂Pc macrocycle undergoes strong distortion, which allows for increasing its contact surface with the nanotube sidewall or spherical fullerene, and therefore makes π-π interactions more efficient.     

Covalent attachment and hybridization of DNA oligonucleotides on patterned single-walled carbon nanotube films

DNA oligonucleotides were covalently immobilized to prepatterned single-walled carbon nanotube (SWNT) multilayer films by amidation. SWNT multilayer films were constructed via consecutive condensation reactions creating stacks of functionalized SWNT layers linked together by 4,4'-oxydianiline. Aminated- or carboxylated-DNA oligonucleotides were covalently immobilized to the respective carboxylated or aminated SWNT multilayer films through amide bond formation using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride. UV-vis-NIR spectroscopic analysis indicated that the SWNT film surface density increased uniformly according to the number of reaction cycles. Scanning electron microscopy and contact angle measurements of the SWNT multilayer film revealed a uniform coverage over the substrate surface. The covalent attachment of DNA oligonucleotides to the SWNT multilayer films and their subsequent hybridization with complementary oligonucleotides were verified using X-ray photoelectron spectroscopy and fluorescence-based measurements. This is the first report demonstrating that DNA oligonucleotides can be covalently attached to immobilized SWNT multilayer films. The anchored DNA oligonucleotides were shown to exhibit excellent specificity, realizing their potential in future biosensor applications.     

Direct attachment of well-aligned single-walled carbon nanotube architectures to silicon (100) surfaces: a simple approach for device assembly

A new approach for the attachment of vertically-aligned shortened carbon nanotube architectures to a silicon (100) substrate by chemical anchoring directly to the surface has been demonstrated for the first time. The ordered assembly of single-walled carbon nanotubes (SWCNTs) was accomplished by hydroxylating the silicon surface followed by a condensation reaction with carboxylic acid functionalised SWCNTs. This new nanostructure has been characterised by X-ray photoelectron, Raman and Fourier transform infrared (FTIR) spectroscopy as well as scanning electron and atomic force microscopy. The assembly behaviour of SWCNTs onto the silicon surface shows a fast initial step producing isolated functionalised carbon nanotubes or nanotube bundles anchored to the silicon surface followed by a slower step where the adsorbed nanotubes grow into larger aggregates via van der Waals interactions between adsorbed and solvated nanotubes. The electrochemical and optical properties of the SWCNTs directly attached to silicon have also been investigated. These new nanostructures are excellent electrochemical electrodes. They also fluoresce in the wavelength range 650-800 nm. The successful attachment of the SWCNTs directly to silicon provides a simple, new avenue for fabrication and development of silicon-based nanoelectronic, nano-optoelectronic and sensing devices. Compared to existing techniques, this new approach has several advantages including low operating temperature, low cost and the possibility of further modification.     

Micelle-encapsulated carbon nanotubes: a route to nanotube composites

We report a general approach toward dispersing single-walled carbon nanotubes (SWNTs) in solvents and polymer materials, by encapsulating SWNTs within cross-linked micelles. Micelles made from polystyrene-block-poly(acrylic acid) (PS-b-PAA), an amphiphilic block copolymer, are first assembled around SWNTs by gradually adding H2O to a suspension of nanotubes in dimethylformamide. The hydrophilic, outer shells of these micelles are then chemically cross-linked with a difunctional linker molecule. Pure encapsulated SWNTs (e-SWNTs) can then be separated from empty cross-linked micelles by consecutive cycles of centrifugation and redispersion. Atomic force and transmission electron microscopies of the resulting nanostructures demonstrate that individual nanotubes (rather than bundles) have been completely encased in polymer shells whose thickness is slightly larger than that of empty micelles. e-SWNTs encapsulated in PS-b-PAA can be permanently redispersed in H2O, in organic solvents, and in both hydrophobic and hydrophilic polymer matrices with minimal sonication. Micelle encapsulation could improve the compositing of SWNTs in a wide variety of polymer materials for structural, electronic, and thermal applications.     

Lattice dynamics of carbon chain inside a carbon nanotube

Based on the density functional theory, we obtain the optimum geometry of carbon chain inside a carbon nanotube. The phonon spectrum and specific heat of such a chain and nanotube hybrid system are calculated in terms of lattice dynamics theory. Some new phonon branches that have been obtained come from the coupling vibrations of the nanotube and the chain. The bending and stretching modes of the chain appear at about 520 cm(-1)and 1935 cm(-1) at Gamma point, respectively. It is found that the softening of G modes results mainly from the chain induced variations in the bond length on nanotube, independent of van der Waals interaction, while the stiffening of radial breathing mode is developed by the competition between the two factors. In the low-frequency region, the vibrational density of states are very different from that of the bare nanotube. Its specific heat implies the underlying quantized phonon structures and much large thermal conductivity in the hybrid system. In addition, the chain-length dependent vibration modes are calculated, from which it is expected that a finite chain of about 14 carbon atoms in the nanotube may produce the experimental Raman peak at about 1850 cm(-1).     

Carbon nanotube motors driven by carbon nanotube

We propose a new type of carbon nanotube (CNT) motor composed of a single-wall CNT (SWCNT) and a double-wall CNT (DWCNT), that are in mechanical contact. The rotational motion of our CNT motor is controllable by the translational motion of the SWCNT along the axis of the DWCNT. From molecular dynamics simulations, we show how our CNT motor can be driven in a controlled manner.     

The regioselectivity of addition to carbon nanotube segments

Calculations (AM1) demonstrate that Clar's valence bond model predicts the long-range reactivity patterns of hydrogenation of carbon nanotube (CNT) segments. CNT segments behave as other polycyclic aromatic hydrocarbons--hydrogenation of double bonds is energetically preferred over hydrogenation of aromatic sextets. The frontier molecular orbitals of CNT segments have greatest amplitude at the double bonds, suggesting that Clar's model also predicts kinetic reactivity.     

Protein stability at a carbon nanotube interface

The interactions of proteins with solid surfaces occur in a variety of situations. Motivated by the many nanoengineering applications of protein-carbon nanotube hybrids, we investigate the conformational transitions of hen egg white lysozyme adsorbed on a carbon nanotube. Using a C(α) structure-based model and replica exchange molecular dynamics, we show how the folding/unfolding equilibrium of the adsorbed protein varies with the strength of its coupling to the surface. The stability of the native state depends on the balance between the favorable entropy and unfavorable enthalpy change on adsorption. In the case of a weakly attractive surface when the former dominates, the protein is stabilized. In this regime, the protein can fold and unfold while maintaining the same binding fraction. With increasing surface attraction, the unfavorable enthalpic effect dominates, the native state is destabilized, and the protein has to extensively unbind before changing states from unfolded to folded. At the highest surface coupling, the entropic penalty of folding vanishes, and a folding intermediate is strongly stabilized. In this intermediate state, the α-domain of lysozyme is disrupted, while the β-sheet remains fully structured. We rationalize the relative stability of the two domains on the basis of the residue contact order.     

Bacterial attachment to iron-impregnated granular activated carbon

Bacterial attachment to iron-impregnated granular activated carbon (Fe-GAC) was investigated in this study using Enterococcus faecalis ATCC 10100 and charcoal-based GAC. Two sets of column experiments were performed under different ionic strengths and pH conditions. Breakthrough curves of bacteria were obtained by monitoring effluent. Mass recoveries and attachment rate coefficients were quantified from these curves. In addition, characteristics of Fe-GAC were analyzed using field emission scanning electron microscopy (FESEM) and X-ray spectrometry (EDS). Results show that Fe-GAC was characterized by mosaic-like deposition layers of iron oxides with about 2 μm in thickness. Color mapping with FESEM visualized the spatial distribution of carbon (yellow-green) and iron (red) on Fe-GAC. EDS indicates that iron was distinctly found from Fe-GAC at three peak positions. Results also reveal that bacterial attachment to Fe-GAC was affected by ionic strength and pH.Bacterial mass recoveries decreased from 62.9 to 41.7% with increasing ionic strength from 1 to 50 mM. This indicates that bacterial attachment to the surfaces of Fe-GAC was enhanced with increasing ionic strength. With increasing pH from 6.46 to 9.19, mass recoveries increased from 50.5 to 84.2%, indicating that bacterial attachment to Fe-GAC was reduced with increasing pH. This study demonstrates that iron oxides offer favorable attachment sites for bacteria on the surfaces of Fe-GAC and further improves the knowledge of bacterial removal in Fe-GAC.     

Orientation of a benzene molecule inside a carbon nanotube

Benzene molecules confined in carbon nanotubes of varying radii are employed as semiconductors in electronic nanodevices, and their orientation determines the electrical properties of the system. In this paper, we investigate the interaction energy of all the possible configurations of a benzene molecule inside various carbon nanotubes and then we determine the equilibrium configuration. We adopt the continuous approach together with the semi-empirical Lennard-Jones potential function to model van der Waals interaction between a benzene molecule and a carbon nanotube. This approach results in an analytical expression, which accurately approximates the interaction energy and can be readily used to generate numerical data. We find that horizontal, tilted and perpendicular configurations on the axis of the carbon nanotube are all possible equilibrium configurations of the benzene molecule when the radius of the carbon nanotube is less than 5.580 Å. However, when the radius of the carbon nanotube is larger than 5.580 Å an offset horizontal orientation is the only possible equilibrium configuration of the benzene molecule. In the limiting case, the orientation of a benzene molecule on a graphene sheet can be derived simply by letting the radius of the carbon nanotube tend to infinity.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

Noncovalent functionalization of single-walled carbon nanotubes with water-soluble porphyrins

We have employed water-soluble porphyrin molecules [meso-(tetrakis-4-sulfonatophenyl) porphine dihydrochloride] to solubilize single-walled carbon nanotubes (SWNTs), resulting in aqueous solutions that are stable for several weeks. The porphyrin-nanotube complexes have been characterized with absorption and fluorescence spectroscopy and with AFM. We find that the porphyrin/SWNT interaction is selective for the free base form, and that this interaction stabilizes the free base against protonation to the diacid. Under mildly acidic conditions nanotube-mediated J-aggregates form, which are unstable in solution and result in precipitation of the nanotubes over the course of a few days. Porphyrin-coated SWNTs can be precisely aligned on hydrophilic poly(dimethylsiloxane) (PDMS) surfaces by combing SWNT solution along a desired direction and then transferred to silicon substrates by stamping. Parallel SWNT patterns have been fabricated in this manner.     

Noncovalent interactions of molecules with single walled carbon nanotubes

In this critical review we survey non-covalent interactions of carbon nanotubes with molecular species from a chemical perspective, particularly emphasising the relationship between the structure and dynamics of these structures and their functional properties. We demonstrate the synergistic character of the nanotube-molecule interactions, as molecules that affect nanotube properties are also altered by the presence of the nanotube. The diversity of mechanisms of molecule-nanotube interactions and the range of experimental techniques employed for their characterisation are illustrated by examples from recent reports. Some practical applications for carbon nanotubes involved in non-covalent interactions with molecules are discussed.     

Noncovalent functionalization and solubilization of carbon nanotubes by using a conjugated Zn-porphyrin polymer

A highly soluble, conjugated Zn-porphyrin polymer was synthesized and found to strongly interact with the surface of single-walled carbon nanotubes, producing a soluble polymer-nanotube complex. Successful complexation required the addition of trifluoroacetic acid to the solvent (THF). It was found that the complex remained soluble after excess free polymer was removed from solution, and could be centrifuged at high speed with no observable sedimentation. Furthermore, the polymer-nanotube assembly resulted in enhanced planarization and conjugation within the porphyrin polymer, which was manifested in a 127 nm bathochromic shift of the Q-band absorption. Control experiments with the Zn-porphyrin monomer indicated that homogeneous solutions could be prepared by means of sonication, but the monomer-nanotube interactions were significantly weaker, leading to nanotube precipitation within minutes. Atomic force microscopy (AFM) studies indicated that the polymer enables exfoliation of nanotube bundles and is able to "stitch" multiple nanotubes together into a series of long, interconnected strands.     

Deuterium attachment to carbon nanotubes in deuterated water

A systematic investigation on the unusual attachment of labile deuterium to carbon nanotubes in deuterated water and alcohols is reported. The carbon nanotubes were solubilized through the established functionalization of the nanotube-bound carboxylic acids to allow solution-phase reaction and characterization. The deuterium attachment was found under several experimental conditions, including the use of deuterated ethanol as a co-reactant in the nanotube functionalization reaction and the refluxing of functionalized or simply purified carbon nanotubes in deuterated water and alcohols. The solubility of the functionalized carbon nanotube samples in common organic solvents and water allowed unambiguous (2)H NMR characterization. The reproducible broad (2)H NMR signal at approximately 6.5 ppm is assigned to carbon nanotube-attached deuterium species. The assignment is supported by the results from FT-IR measurements. The carbon-deuterium interaction is so strong that the corresponding vibration resembles the typical C-D stretching mode in the characteristic frequency region. The FT-IR peak intensities also correlate well with the (2)H NMR signal integrations in a series of samples. Mechanistic implications of the results are discussed.     

Application of single-walled carbon nanotube body to unique emitter: a first-principles study

The field emission characteristics of the body for single-walled carbon nanotubes (SWNTs) are investigated by use of the first-principles calculations. We find that field emission property, chemical stability and binding energy of the tube body with the practical diameter are less sensitive to the tube diameter, morphology, and conductive characteristic, and conclude the emission features of the body film: consistence in emission sites, uniformity in emission energy distribution, predictability in emission effects and high emission stability, which are similar to those of graphite sheet or diamond film. These unique features guarantee the tube body to be applicable to flat panel displays with the same picture quality, cylindrical cathode and linear emitter.