Preparation and thermal reliability of <Emphasis Type="Italic">N</Emphasis>-butyl stearate/methyl palmitate composite phase change material

In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T _f = 19.74–5.59 °C; T _m = 18.34–33.80 °C) and latent heats (ΔH _f = 176.8 J g^?1; ΔH _m = 189.3 J g^?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.     

Improving safety performance of lactose-fueled binary pyrotechnic systems of smoke dyes

The lactose/KClO₃ is a widely used pyrotechnic mixture to vaporize organic materials, such as smoke dyes. However, because of low ignition temperature of this mixture, serious precaution should be taken into account to prevent its accidental self-ignition. In order to find a safe and efficient alternative of this conventional mixture, KClO₃ has been replaced by common oxidizing agents including KMnO₄, KNO₃, KClO₄, Ba(NO₃)₂, PbO₂ and NH₄ClO₄. TG and DTA analysis have been used to obtain thermal characteristic of the mixtures. Based on ignition temperature of the pyrotechnic mixtures we can divide them into four categories as follows: (1) the mixture igniting at low temperature, i.e., at about 200 °C. (2) Moderate temperature igniting mixture, in which ignition occurs at 300–400 °C. (3) High temperature igniting mixture with ignition temperature higher than 400 °C .(4) Not igniting mixtures. Also, the apparent activation energy (E), ΔG ^#, ΔH ^#, ΔS ^# and critical ignition temperature (T _b ) of the ignition processes of low and moderate temperature igniting mixtures were obtained from the DSC experiments. Finally, among the investigated mixtures, lactose/KNO₃ can be considered as a safe and efficient pyrotechnic composition for vaporization of organic materials, such as smoke dyes, due to its moderate safe ignition temperature.     

Hermetic thermal behaviors and specific heat capacities of bis(aminofurazano)furazan and bis(nitrofurazano)furazan

Thermal behaviors of bis(aminofurazano)furazan (BAFF) and bis(nitrofurazano)furazan (BNFF) were studied by the differential scanning calorimetry (DSC) method with a special hermetic high-pressure crucible and compared to that with a common standard Al crucible. The exothermic decomposition processes of the two compounds were completely revealed. The extrapolated onset temperature, peak temperature and enthalpy of exothermic decomposition at the heating rate of 10 °C min^?1 are 290.2, 313.4 °C and ??2174 J g^?1 for BAFF, and 265.8, 305.0 °C and ??2351 J g^?1 for BNFF, respectively. The apparent activation energies of the decomposition process for the two compounds are 115.7 and 131.7 kJ mol^?1, respectively. The self-accelerating decomposition temperatures and critical temperatures of thermal explosion are 247.5 and 368.7 °C for BAFF, and 249.6 and 268.1 °C for BAFF, respectively. Both BAFF and BNFF present high thermal stability. The specific heat capacities for the two compounds were determined with the micro-DSC method, and the specific heat capacities and molar heat capacities at 298.15 K are 1.0921 J g^?1 K^?1 and 257.9 J mol^?1 K^?1 for BAFF, and 1.0419 J g^?1 K^?1 and 308.5 J mol^?1 K^?1 for BNFF, respectively.     

Studies on the thermal behavior and decomposition kinetic of drugs cetirizine and simvastatin

Understanding the response of drugs and their formulations to thermal stresses is an integral part of the development of stable medicinal products. In the present study, the thermal degradation of two drug samples (cetirizine and simvastatin) was determined by differential scanning calorimetery (DSC) and simultaneous thermogravimetery/differential thermal analysis (TG/DTA) techniques. The results of TG analysis revealed that the main thermal degradation for the cetirizine occurs during two temperature ranges of 165–227 and 247–402 °C. The TG/DTA analysis of simvastatin indicates that this drug melts (at about 143 °C) before it decomposes. The main thermal degradation for the simvastatin occurs during two endothermic behaviors in the temperature ranges of 238–308 and 308–414 °C. The influence of the heating rate (5, 10, 15, and 20 °C min^?1) on the DSC behavior of both the drug samples was verified. The results showed that as the heating rate was increased, decomposition temperatures of the compounds were increased. Also, the kinetic parameters such as activation energy and frequency factor for the compounds were obtained from the DSC data by non-isothermal methods proposed by ASTM E696 and Ozawa. Based on the values of activation energy obtained by ASTM E696 method, the values of activation energy for cetirizine and simvastatin were 120.8 and 170.9 kJ mol^?1, respectively. Finally, the values of ΔS ^#, ΔH ^#, and ΔG ^# of their decomposition reaction were calculated.     

Effects of various fire-extinguishing reagents for thermal hazard of triacetone triperoxide (TATP) by DSC/TG

Acetone, hydrogen peroxide (H₂O₂), and sulfuric acid (H₂SO₄) are easily to produce triacetone triperoxide (TATP), which is an organic peroxide and a hazardous material. The aim of this study was to analyze the thermal hazard of various fire-extinguishing reagents mixed with TATP. Various functions of fire-extinguishing reagents may have different extent of reactions with TATP. Differential scanning calorimetry (DSC) and thermogravimetric analyzer (TG) were used to detect the thermal hazard and to evaluate the effect of fire-extinguishing reagents mixed with TATP under fire condition. TATP decomposed rapidly and final decomposition was calculated before 200 °C. Therefore, heat of decomposition (ΔH _d) of TATP was evaluated to be 2,500 J g^?1 by DSC under 2 °C min^?1 of heating rate. H₂O₂, acetone, and H₂SO₄ should not be mixed in a wastewater drum. TATP decomposed at 50 °C by DSC using O₂ of reaction gas that is an exothermic reaction and can decompose a large amount of heat. Therefore, TATP was applied to assess thermal pyrolysis by DSC employing N₂ of reaction gas that can analyze an endothermic reaction. Mass loss percentage of TATP was evaluated to be 100 % when the ambient temperature exceeds 110 °C by TG using O₂ or N₂ of reaction gas.     

Differential scanning calorimetric measurement of cartilage destruction caused by Gram-negative septic arthritis

The treatment of the bacterial arthritis of the joints is still a great challenge for orthopedic surgeons and rheumatologists. Aerobic Gram-negative bacteria are involved only in 20–25 % of cases. The inadequate therapy can cause cartilage destruction and can result in severe osteoarthritis of the affected joint. The aim of this study was to demonstrate and follow the destruction of the joints’ hyaline cartilage by calorimetric method. We induced experimental septic arthritis in knee joints of seven New Zealand rabbits by a single inoculation of Escherichia coli ATCC 25922 culture (0.5 mL cc. 10⁸ ± 5 % c.f.u.). The duration of this experiment was 7 days from the first to the last injection. After euthanizing the first subject, all other animals were given an overdose of anesthetics and samples were isolated from the cartilage of the femurs by surgical intervention for calorimetric measurements. The DSC scans clearly demonstrated the development of infective structural destruction in the cartilage from the first to the tenth day of incubation. In case of healthy control the melting temperatures (T _m) were: 57 and 63.1 °C and the total calorimetric enthalpy change (ΔH) was 0.37 J g^?1. After the third day, the enthalpy increased extremely (3.67 J g^?1), the two transition temperatures shifted toward lower temperature: 47.7 and 62.3 °C. At the fifth day, the effect of infection is culminated with T _m = 62.2 °C and a further elevation in ΔH (3.75 J g^?1). These results can indicate a dramatic change of the structure of rabbit cartilage between the third and fifth days. Therefore, the time elapsed seems to be critical and possesses clinical relevance, since by the sixth day, ΔH decreased to 2.6 J g^?1 with a practically unchanged melting temperature. Between the sixth and tenth days, significantly increased melting temperatures (64.9 °C) were observed with decreased (3.38 J g^?1) calorimetric enthalpy. In conclusion, calorimetric measurements have been proven to be a reliable method in the measurement of cartilage destruction, caused by Gram-negative septic arthritis.     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

Characterization of crystalline and amorphous content in pharmaceutical solids by dielectric thermal analysis

Morphological and thermodynamic transitions in drugs as well as their amorphous and crystalline content in the solid state have been distinguished by thermal analytical techniques, which include dielectric analysis (DEA), differential scanning calorimetry (DSC), and macro-photomicrography. These techniques were used successfully to establish a structure versus property relationship with the United States Pharmacopeia standard set of active pharmaceutical ingredient (API) drugs. A distinguishing method is the DSC determination of the amorphous and crystalline content which is based on the fusion properties of the specific drug and its recrystallization. The DSC technique to determine the crystalline and amorphous content is based on a series of heat and cool cycles to evaluate the drugs ability to recrystallize. To enhance the amorphous portion, the API is heated above its melting temperature and cooled with liquid nitrogen to ?120 °C (153 K). Alternatively a sample is program heated and cooled by DSC at a rate of 10 °C min^?1. DEA measures the crystalline solid and amorphous liquid API electrical ionic conductivity. The DEA ionic conductivity is repeatable and differentiates the solid crystalline drug with a low conductivity level (10^?2 pS cm^?1) and a high conductivity level associated with the amorphous liquid (10⁶ pS cm^?1). The DSC sets the analytical transition temperature range from melting to recrystallization. However, analysis of the DEA ionic conductivity cycle establishes the quantitative amorphous and crystalline content in the solid state at frequencies of 0.10–1.00 Hz and to greater than 30 °C below the melting transition as the peak melting temperature. This describes the “activation energy method.” An Arrhenius plot, log ionic conductivity versus reciprocal temperature (K^?1), of the pre-melt DEA transition yields frequency dependent activation energy (E _a, J mol^?1) for the complex charging in the solid state. The amorphous content is inversely proportional to the E _a where the E _a for the crystalline form is higher and lower for the amorphous form with a standard deviation of ±2%. There was a good agreement between the DSC crystalline melting, recrystallization, and the solid state DEA conductivity method with relevant microscopic evaluation. An alternate technique to determine amorphous and crystalline content has been established for the drugs of interest based on an obvious amorphous and crystalline state identified by macro-photomicrography and compared to the conductivity variations. This second “empirical method” correlates well with the “activation energy” method.     

Kinetic and thermodynamic parameters of volatilization of biodiesel from babassu, palm oil and mineral diesel by thermogravimetric analysis (TG)

The boiling point and volatility are important properties for fuels, as it is for quality control of the industry of petroleum diesel and biofuels. In addition, through the volatility is possible to predict properties, such as vapor pressure, density, latent heat, heat of vaporization, viscosity, and surface tension of biodiesel. From thermogravimetry analysis it is possible to find the kinetic parameters (activation energy, pre-exponential factor, and reaction order), of thermally simulated processes, like volatilization. With the kinetic parameters, it is possible to obtain the thermodynamic parameters by mathematical formula. For the kinetic parameters, the minor values of activation energy were found for mineral diesel (E = 49.38 kJ mol^?1), followed by babassu biodiesel (E = 76.37 kJ mol^?1), and palm biodiesel (E = 87.00 kJ mol^?1). Between the two biofuels studied, the babassu biodiesel has the higher minor value of activation energy. The thermodynamics parameters of babassu biodiesel are, ΔS = ?129.12 J mol^?1 K^?1, ΔH = +80.38 kJ mol^?1 and ΔG = +142.74 kJ mol^?1. For palm biodiesel ΔS = ?119.26 J mol^?1 K^?1, ΔH = + 90.53 kJ mol^?1 and ΔG = +141.21 kJ mol^?1, and for diesel ΔS = ?131.3 J mol^?1 K^?1, ΔH = +53.29 kJ mol^?1 and ΔG = +115.13 kJ mol^?1. The kinetic thermal analysis shows that all E, ΔH, and ΔG values are positive and ΔS values are negative, consequently, all thermodynamic parameters indicate non-spontaneous processes of volatilization for all the fuels studied.     

Theoretical study on the isomerization and tautomerism in barbituric acid

Isomerization and tautomerism of 16 isomers of barbituric acid (BA) were studied at the MP2 and B3LYP levels of theory. Activation energies (E _a), imaginary frequencies (υ), and Gibbs free energies (ΔG ^#) of the amine-imine and keto-enol tautomerisms and O–H internal rotations were calculated. The activation energies of amine-imine tautomerisms were in the range of 110–200 kJ/mol and for keto-enol tautomerisms were larger than 200 kJ/mol. The calculated activation energies of internal O–H rotations were smaller than 60 kJ/mol. Effect of micro-hydration on the transition state structures and activation energies of the tautomerisms were also investigated. Water molecule catalyzed the tautomerisms and decreased the activation energies of both the amine-imine and keto-enol tautomerisms about 100–120 kJ/mol.     

Low-temperature heat capacity and standard thermodynamic functions of 1-butyl-3-methylimidazolium lactate

The heat capacities of 1-butyl-3-methylimidazolium lactate ionic liquids ([C₄mim][Lact]) were measured with a highly accurate automatic adiabatic calorimeter over the temperature range from 79 to 406 K. And the experimental values of molar heat capacities were fitted to a polynomial equation using least square method in the appropriate temperature ranges. The standard molar heat capacity was determined to be 1734.46?±?5.12 J K^?1 mol^?1 at 298.15 K. The molar enthalpy and molar entropy of the transition were determined to be 15.575?±?0.045 and 64.44?±?0.14 J K^?1 mol^?1. Other thermodynamic properties, such as (H_T???H_298.15) and (S_T???S_298.15), were also calculated. Furthermore, when the temperature reaches 241.87 K, the strongest peaks appeared by analysis of the heat capacity curve. This phenomenon could be explained from the interionic interaction, which is the hydrogen bond between the anions and cations.     

Thermal hazard evaluation of tert-butyl hydroperoxide mixed with four acids using calorimetric approaches

Possessing thermal instability inherently, organic peroxides have caused many severe accidents in chemical industries all over the world. tert-Butyl hydroperoxide (TBHP) is usually used as initiator or oxidant because of its strong oxidizing ability in the chemical process. In this study, the thermal hazard analysis of TBHP mixed with various acids was investigated. Differential scanning calorimetry (DSC) and vent sizing package 2 were used to figure out the thermal runaway behaviors of TBHP. Thermokinetic parameters, such as exothermic onset temperature (T ₀), maximum temperature (T _max), and enthalpy (ΔH), were obtained from thermal curves. In addition, the activation energy (E _a) and rate constant (k) were calculated by the Arrhenius equation. Therefore, the T ₀ was determined to be 91.6 °C for exothermic reaction using DSC under 4 °C min^?1 of heating rate. The E _a for exothermic reaction was calculated to be 92.38 kJ mol^?1 by DSC in this study. As far as loss prevention is concerned, thermokinetic parameters are crucial to the relevant processes in the chemical industries, particularly under process upsets.     

Thermodynamics and kinetics of adsorption of Cu(II) from aqueous solutions onto a new cation exchanger derived from tamarind fruit shell

A novel cation exchanger (TFS-CE) having carboxylate functionality was prepared through graft copolymerization of hydroxyethylmethacrylate onto tamarind fruit shell (TFS) in the presence of N,N′-methylenebisacrylamide as a cross-linking agent using K₂S₂O₈/Na₂S₂O₃ initiator system, followed by functionalisation. The TFS-CE was used for the removal of Cu(II) from aqueous solutions. At fixed solid/solution ratio the various factors affecting adsorption such as pH, initial concentration, contact time, and temperature were investigated. Kinetic experiments showed that the amount of Cu(II) adsorbed increased with increase in Cu(II) concentration and equilibrium was attained at 1 h. The kinetics of adsorption follows pseudo-second-order model and the rate constant increases with increase in temperature indicating endothermic nature of adsorption. The Arrhenius and Eyring equations were used to obtain the kinetic parameters such as activation energy (E_a) and enthalpy (ΔH^#), entropy (ΔS^#) and free energy (ΔG^#) of activation for the adsorption process. The value of E_a for adsorption was found to be 10.84 kJ · mol^?1 and the adsorption involves diffusion controlled process. The equilibrium data were well fitted to the Langmuir isotherm. The maximum adsorption capacity for Cu(II) was 64 · 10 mg · g^?1 at T = 303 K. The thermodynamic parameters such as changes in free energy (ΔG^°), enthalpy (ΔH^°), and entropy (ΔS^°) were derived to predict the nature of adsorption process. The isosteric heat of adsorption increases with increase in surface loading indicating some lateral interactions between the adsorbed metal ions.     

Determination of salutary parameters to facilitate bio-energy production from three uncommon biomasses using thermogravimetric analysis

Fuels derived from biomass are renewable as well as environment friendly. In this study, three biomasses viz. husk of areca nut (Areca catheu), trunks of moj (Albizzia lucida), and bon bogori (Ziziphus rugosus) available in North-East region of India were tested as potential biofuel sources. The accentuation of this study was to determine the kinetic parameters using thermogravimetric (TG) technique under air and nitrogen atmosphere. The experiments were carried out within temperature range 300–973 K under air and nitrogen atmosphere at four different heating rates viz. 5, 10, 15, and 20 K min^?1, respectively. The mass losses at different lumps in the TG graphs were estimated. The first-order kinetic parameters such as activation energy and pre-exponential factor were calculated for different reaction zones for all the three biomass samples. Effects of atmosphere on combustion characteristics (e.g., peak temperature, ignition temperature, and reactivity index) of biomasses were also determined in this study. Areca nut husk has highest ignition temperature (526.38 K) and reactivity index (0.21) but moj has highest peak temperature (597.91 K) along with highest activation energy (348.04 kJ mol^?1) and pre-exponential factor (1.12 × 10²⁴ min^?1), respectively.     

Kinetics and Thermodynamics of Ethanol Production by Saccharomyces cerevisiae MLD10 Using Molasses

In this study, we have used ultraviolet (UV) and γ-ray induction to get a catabolite repression resistant and thermotolerant mutant with enhanced ethanol production along with optimization of sugar concentration and temperature of fermentation. Classical mutagenesis in two consecutive cycles of UV- and γ-ray-induced mutations evolved one best catabolite-resistant and thermotolerant mutant Saccharomyces cerevisiae MLD10 which showed improved ethanol yield (0.48?±?0.02 g g^?1), theoretical yield (93?±?3 %), and extracellular invertase productivity (1,430?±?50 IU l^?1 h^?1), respectively, when fermenting 180 g sugars l^?1 in molasses medium at 43 °C in 300 m³ working volume fermenter. Ethanol production was highly dependent on invertase production. Enthalpy (ΔH*) (32.27 kJ M^?1) and entropy (ΔS*) (?202.88 J M^?1 K^?1) values at 43 °C by the mutant MLD10 were significantly lower than those of β-glucosidase production by a thermophilic mutant derivative of Thermomyces lanuginosus. These results confirmed the enhanced production of ethanol and invertase by this mutant derivative. These studies proved that mutant was significantly improved for ethanol production and was thermostable in nature. Lower fermentation time for ethanol production and maintenance of ethanol production rates (3.1 g l^?1 h^?1) at higher temperature (43 °C) by this mutant could decrease the overall cost of fermentation process and increase the quality of ethanol production.     

Thermal degradation of hydroxypropyl trimethyl ammonium chloride chitosan–Cd complexes

Thermal degradation of hydroxypropyl trimethyl ammonium chloride chitosan–Cd complexes (HTCC–Cd) was investigated by thermogravimetric analysis. The results indicate that the degradation of HTCC–Cd in nitrogen atmosphere was two-step reaction. For the first step of degradation, the initial temperature of mass loss (T ₀), the final temperature of mass loss (T _f), and the temperature of maximum mass loss (T _p) increase linearly with the rising of heating rate (B). T _o = 1.241B + 220.3, T _p = 1.111B + 245.8, and T _f = 1.335B + 358.2. Using different methods, the kinetic parameters of the two steps were investigated. The results show that the activation energies of the first step of degradation obtained using Friedman and Flynn–Wall–Ozawa methods are 1.684 × 10⁵ and 1.646 × 10⁵ J mol^?1, and the corresponding activation energies for the second step are 1.165 × 10⁵ J mol^?1 and 1.373 × 10⁵ kJ mol^?1. The results obtained from Phadnis–Deshpande methods indicate that the two degradation processes are both nucleation and growth process, and follow A₄ mechanism with intergral form g(X) = [?ln(1 ? X)]⁴.     

Low-temperature thermodynamic properties of L- and DL-valines

Heat capacities C _p(T) of L-valine and DL-valine were measured in the temperature range 6–300 K with an adiabatic calorimeter; thermodynamic functions were calculated based on these measurements. At 298.15 K, the values of heat capacity, C _p; entropy, S _m ⁰ (T) ? S _m ⁰ (0); enthalpy, H _m ⁰ (T) ? H _m ⁰ (0) of L-valine are equal, respectively, to 167.9 ± 0.3 J K^?1 mol^?1; 178.5 ± 0.4 J K^?1 mol^?1; and 27510 ± 60 J mol^?1. For DL-valine, these values are equal, respectively, to 167.3 ± 0.3 J K^?1 mol^?1, 174.4 ± 0.3 J K^?1 mol^?1, and 27000 ± 50 J mol^?1. The difference between the heat capacities of enantiomer and racemate has been calculated and compared with the similar data for serines, cysteines, and phenylglycines.     

Thermo-physical characterization of some paraffins used as phase change materials for thermal energy storage

Three phase change paraffinic materials (PCMs) were thermophysically (phase-transition temperatures, latent heat, heat capacity at constant pressure, density, and thermal conductivity) investigated in order to be used as latent heat storage media in a pilot plant developed in Plovdiv Bulgaria. Raman structural investigation probes aliphatic character of the E53 sample, while the E46 and ECP samples contain also unsaturated components due to their Raman features within 1,500–1,700 cm^?1 range. Orthorhombic structure of the three PCMs was evidenced by the Raman modes at the 1,417 cm^?1. The highest latent heat value, ΔH, of phase transitions among the three materials was represented by summation of a solid order–disorder, and melting latent heat was encountered by the E53 paraffin, i.e., 194.32 J g^?1 during a μ-DSC scan of 1 °C min^?1. Conversely, the ECP composite containing ceresin component shows the lowest latent heat value of 143.89 J g^?1 and the highest thermal conductivity of 0.46 W m^?1 K^?1 among the three phase change materials (PCMs). More facile melt-disordered solid transition with the activation energy of 525.45 kJ mol^?1 than the lower temperature transition of disorder–order (E _a of 631.73 kJ mol^?1) during the two-step process of solidification for the E53 melt are discussed in terms of structural and molecular motion changes.     

Low-temperature thermodynamics of Ln(Me2dtc)3(C12H8N2) (Me2dtc = dimethyldithiocarbamate, Ln = La, Pr, Nd, Sm)

The heat capacities of Ln(Me₂dtc)₃(C₁₂H₈N₂) (Ln = La, Pr, Nd, Sm, Me₂dtc = dimethyldithiocarbamate) have been measured by the adiabatic method within the temperature range 78–404 K. The temperature dependencies of the heat capacities, C _p,m [La(Me₂dtc)₃(C₁₂H₈N₂)] = 542.097 + 229.576 X ? 27.169 X ² + 14.596 X ³ ? 7.135 X ⁴ (J K^?1 mol^?1), C _p,m [Pr(Me₂dtc)₃(C₁₂H₈N₂)] = 500.252 + 314.114 X ? 17.596 X ² ? 0.131 X ³ + 16.627 X ⁴ (J K^?1 mol^?1), C _p,m [Nd(Me₂dtc)₃(C₁₂H₈N₂)] = 543.586 + 213.876 X ? 68.040 X ² + 1.173 X ³ + 2.563 X ⁴ (J K^?1 mol^?1) and C _p,m [Sm(Me₂dtc)₃(C₁₂H₈N₂)] = 528.650 + 216.408 X ? 16.492 X ² + 12.076 X ³ + 4.912 X ⁴ (J K^?1 mol^?1), were derived by the least-squares method from the experimental data. The heat capacities of Ce(Me₂dtc)₃(C₁₂H₈N₂) and Pm(Me₂dtc)₃(C₁₂H₈N₂) at 298.15 K were evaluated to be 617.99 and 610.09 J K^?1 mol^?1, respectively. Furthermore, the thermodynamic functions (entropy, enthalpy and Gibbs free energy) have been calculated using the obtained experimental heat capacity data.     

Synthesis, structure analysis and thermodynamics of [Ni(H2O)4(TO)2](NO3)2·2H2O (TO = 1,2,4-triazole-5-one)

A novel complex [Ni(H₂O)₄(TO)₂](NO₃)₂·2H₂O (TO = 1,2,4-triazole-5-one) was synthesized and structurally characterized by X-ray crystal diffraction analysis. The decomposition reaction kinetic of the complex was studied using TG-DTG. A multiple heating rate method was utilized to determine the apparent activation energy (E _a) and pre-exponential constant (A) of the former two decomposition stages, and the values are 109.2 kJ mol^?1, 10^13.80 s^?1; 108.0 kJ mol^?1, 10^23.23 s^?1, respectively. The critical temperature of thermal explosion, the entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠) and the free energy of activation (ΔG ^≠) of the initial two decomposition stages of the complex were also calculated. The standard enthalpy of formation of the new complex was determined as being ?1464.55 ± 1.70 kJ mol^?1 by a rotating-bomb calorimeter.