Determination of theophylline in serum by high performance liquid chromatography/mass spectrometry with atmospheric pressure chemical-ionization (APCI HPLC/MS)

 A method for the determination of theophylline (TH), without derivatization, in serum by isotope dilution mass spectrometry using labelled [1, 3-¹⁵N₂-2-¹³C]theophylline (LTH) as internal standard is described. After deproteinization, the analyte is directly injected into a high performance liquid chromatography – mass spectrometer operating with atmospheric-pressure chemical-ionization (APCI HPLC/MS). The concentrations of TH in sera measured by APCI HPLC/MS are compared with results from gas chromatography – isotope dilution mass spectrometry (GC-ID/MS), high performance liquid chromatography (HPLC) and fluorescence polarization immunoassay (FPIA). The accuracy, precision and recovery of the APCI HPLC/MS and GC-ID/MS methods are discussed. The coefficient of variation (CV) determined from duplicate samples was less than 2%. The detection limit was 10 ng/ml at a signal-to-noise ratio of 3:1. Received: 17 January 1996/Revised: 26 March 1996/Accepted: 5 April 1996     

Determination of histamine in port wines and grape juices by ion-pair extraction and stable isotope dilution GC-MS

Summary An isotope dilution, GC-MS method for the quantitation of histamine in wines and grape juices was assayed. This method includes isolation of histamine and its, deuterated analogue [α,α,β,β-²H₄]histamine, used as the labelled internal standard, by ion-pair extraction with bis-2-ethylhexylphosphate, conversion to the volatile derivative: tris-pentafluorobenzyl-histamine, capillary GC separation and measurement of the abundance ratio of the (M-181)⁺ ions from labelled and unlabelled derivatives. The method was successfully applied to the determination of histamine in several samples of Port wine, red and white table wine and grape juice. Data are given on detectability, linearity, repeatability and recovery.     

Candidate reference method: Determination of valproic acid in serum by isotope-dilution mass spectrometry

Summary A method has been developed for the determination of valproic acid, without derivatization, in human serum by isotope-dilution mass spectrometry using labelled 2-propyl[3,3,3-d₃] valeric[5,5,5-d₃] acid as internal standard for accurate quantification of the concentration of valproic acid in the sample. After acidification, the analyte and internal standard are extracted withn-hexane. The amounts of valproic acid in the serum are calculated from the isotope ratio of valproic acid to labelled valproic acid, which is measured by electron impact (EI) and chemical ionization (CI) selected ion monitoring (SIM). The concentrations of valproic acid in sera measured using isotope-dilution mass spectrometry are compared with results from gas-liquid chromatography (GLC) and fluorescence polarization immunoassay (FPIA). The accuracy, precision and recovery of the GC-MS methods are discussed. The coefficient of variation determined from duplicate samples was less than 1.5%. The detection limit was 10 ng mL⁻¹ at a signal-to-noise ratio of 3:1. Part of this work was presented at the Kongre? der Deutschen Gesellschaft für Laboratoriumsmedizin, Berlin, 1994.     

Candidate reference method: Determination of valproic acid in serum by isotope-dilution mass spectrometry

Summary A method has been developed for the determination of valproic acid, without derivatization, in human serum by isotope-dilution mass spectrometry using labelled 2-propyl[3,3,3-d₃]valeric[5,5,5-d₃] acid as internal standard for accurate quantification of the concentration of valproic acid in the sample. After acidification, the analyte and internal standard are extracted withn-hexane. The amounts of valproic acid in the serum are calculated from the isotope ratio of valproic acid to labelled valproic acid, which is measured by electron impact (EI) and chemical ionization (CI) selected ion monitoring (SIM). The concentrations of valproic acid in sera measured using isotope-dilution mass spectrometry are compared with results from gas-liquid chromatography (GLC) and fluorescence polarization immunoassay (FPIA). The accuracy, precision and recovery of the GC-MS methods are discussed. The coefficient of variation determined from duplicate samples was less than 1.5%. The detection limit was 10 ng mL⁻¹ at a signal-to-noise ratio of 3∶1. Part of this work was presented at the Kongre? der Deutschen Gesellschaft für Laboratoriumsmedizin, Berlin, 1994.     

A novel fragmentation of trimethylsilyl ethers of 3β-hydroxy-Δ5-steroids

An ion formed by loss of 56 mass units from the molecular ion is often seen in mass spectra of trimethylsilyl ethers of C₁₉ and C₂₁ steroids having a 3β-hydroxy-Δ⁵ structure and an oxo group at C-17 or C-20. The nature of this fragment was investigated by the use of perdeuteriotrimethylsilyl ether derivatives and of [4-¹⁴C], [3-¹⁸O], [4,4-²H₂] and [2,2,4,4-²H] labelled derivatives of 3β-hydroxy-5-androsten-17-one and 3β-hydroxy-5-pregnen-20-one. Evidence is presented to show that the neutral fragment of mass 56 is composed of carbon atoms 1, 2 and 3, the oxygen at C-3 and four hydrogen atoms. During the fragmentation process, the trimethylsilyl group and one of the hydrogens at C-2 are transferred to the fragment that carries the charge.     

Measurement of oleic acid in human plasma by isotope dilution mass spectrometry

Summary A method for the quantitative determination of oleic acid in human plasma by isotope-dilution mass spectrometric technique is described. For the measurement of the fatty acid concentration (1-¹³C) oleic acid is added to the plasma sample. The fatty acids are extracted with n-hexane. Portions of the extract are esterified by the boron trifluoridemethanol method or stable isotope methylation. The methyl ester derivatives of the fatty acids are separated and detected by GC-MS with the mass spectrometer set to m/z 296 and 297. For the measurement of oleic acid after stable isotope methylation the m/z 299 and m/z 300 are monitored. The amounts of oleic acid in the plasma are calculated from the isotope ratios measured by selected ion monitoring. The recovery of the methylation step and the precision and accuracy of the GC-MS method are presented and discussed.     

Chromatography–mass spectrometry determination of alkyl methylphosphonic acids in urine

The potentials of different chromatography–mass spectrometry methods for the determination of alkyl methylphosphonic acids (AMPAs)—the chemical markers of nerve agents in urine—are compared. The gas chromatography–mass spectrometry (GC–MS) characteristics of various volatile AMPA derivatives are studied. The preference of perfluorobenzyl derivatives over methyl, trimethylsilyl and tert-butyldimethylsilyl esters for the GC–MS determination of AMPAs in urine is demonstrated. An optimal technique for the determination of AMPAs in urine is HPLC combined with high-resolution MS² mass spectrometry with the isotope–labeled forms of target compounds as internal standards. The detection limits of AMPAs in the proposed analytical procedures vary from 0.1 to 1.0 ng/mL.     

Clinical applications of gas chromatography and gas chromatography-mass spectrometry of steroids.

This review article underlines the importance of gas chromatography-mass spectrometry (GC-MS) for determination of steroids in man. The use of steroids labelled with stable isotopes as internal standard and subsequent analysis by GC-MS yields up to now the only reliable measurement of steroids in serum. Isotope dilution GC-MS is the reference method for evaluation of routine analysis of serum steroid hormones. GC-MS is an important tool for detection of steroid hormone doping and combined with a combustion furnace and an isotope ratio mass spectrometer the misuse of testosterone by athletes can be discovered. Finally the so called urinary steroid profile by GC and GC-MS is the method of choice for detection of steroid metabolites in health and disease.     

Analytical methodology to determine stable isotopically labelled and unlabelled theophylline in human plasma using capillary gas chromatography-mass spectrometry

A method is described for the simultaneous determination of [1,3-15N] theophylline and unlabelled theophylline in human plasma using gas chromatography-mass spectrometry. Plasma samples were subjected to extractive alkylation and the stable isotopically labelled and unlabelled forms of the drug were analysed as their N-pentafluorobenzyl derivatives on an SE-52 fused-silica capillary column. Quantitation was made by selected-ion monitoring employing as the internal standard 3-isobutyl-1-methylxanthine. The method has been used to study the absorption kinetics and bioavailability of a sustained release formulation of the drug when co-administered to human volunteers with a conventional formulation of the drug labelled with the stable isotope.     

Quantification of 21 metabolites of methylnaphthalenes and polycyclic aromatic hydrocarbons in human urine

Polycyclic aromatic hydrocarbons (PAHs) and their alkylated derivatives, such as methylnaphthalenes (MeNs), are harmful pollutants ubiquitously present in the environment. Exposure to PAHs has been linked to a variety of adverse health effects and outcomes, including cancer. Alkyl PAHs have been proposed as petrogenic source indicators because of their relatively high abundance in unburned petroleum products. We report a method to quantify 11 urinary methylnaphthols (Me-OHNs), metabolites of 1- and 2-methylnaphthalenes, and 10 monohydroxy PAH metabolites (OH-PAHs), using automated liquid-liquid extraction and isotope dilution gas chromatography tandem mass spectrometry (GC-MS/MS). After spiking urine (1 mL) with ¹³C-labeled internal standards, the conjugated target analytes were hydrolyzed enzymatically in the presence of ascorbic acid. Then, their free species were preconcentrated into 20 % toluene in pentane, derivatized and quantified by GC-MS/MS. The 11 Me-OHNs eluted as 6 distinct chromatographic peaks, each representing 1???3 isomers. Method detection limits were 1.0? 41 pg/mL and the coefficients of variation in quality control materials were 4.7???19 %. The method was used to analyze two National Institute of Standards and Technology’s Standard Reference Materials® and samples from 30 smokers and 30 non-smokers. Geometric mean concentrations were on average 37 (Me-OHNs) and 9.0 (OH-PAHs) fold higher in smokers than in non-smokers. These findings support the usefulness of Me-OHNs as potential biomarkers of non-occupational exposure to MeNs and sources containing MeNs.

A mass spectrometric study of dimethyl ester trimethylsilyl ether derivatives of some 3-hydroxydicarboxylic acids

The fragmentation pathways for the dimethyl ester trimethylsilyl ether derivatives of some 3-hydroxydicarboxylic acids have been found by using B/E 2nd B²/E linked scans and isotope substitution techniques. Most of the fragments are due to ionization at silicon, which induces a fragmentation pattern that intimately reflects the structure of the compounds.     

气相色谱-三重四极杆串联质谱法检测环境空气中的多环芳烃

建立了气相色谱-三重四极杆串联质谱检测环境空气中多环芳烃的方法,并利用同位素稀释法对多环芳烃进行了测定。将该方法应用于华南地区某大型石化企业周边环境空气中多环芳烃的检测,并与气相色谱-质谱方法进行了对比。结果表明,该方法的仪器检出限（0.01~0.15 μg/L）和定量限（0.03~1.5 μg/L）均优于气相色谱-质谱法（0.1~0.8 μg/L和0.3~3.5 μg/L）,并有更好的灵敏度与选择性。当利用气相色谱-质谱作为检测手段时,回收率指示物氘代菲和进样内标六甲基苯均受到了杂质的严重干扰,影响了定量结果的准确性,而三重四极杆串联质谱很好地解决了这些问题。实际样品分析时,标准曲线中16种多环芳烃相对响应因子的相对标准偏差为2.60%~15.6%,氘代化合物的回收率为55.2%~82.3%,空白加标样品的回收率为98.9%~111%,平行样品的相对标准偏差为6.50%~18.4%,采样空白含量范围为未检出~44.3 pg/m³,实验室空白含量范围为未检出~36.5 pg/m³。上述研究表明,分析环境空气中的多环芳烃时,气相色谱-三重四极杆串联质谱方法值得推广。     

An improved method for the simultaneous analysis of phenolic and steroidal estrogens in water and sediment

This paper describes an improved method for the extraction and analysis of seven endocrine disrupting chemicals with wide-ranging polarities from water and sediments using gas chromatography-tandem mass spectrometry (GC-MS/MS). The analytes were 4-tert-octylphenol, 4-nonylphenol, bisphenol A, estrone, 17β-estradiol, 17α-ethynylestradiol and 16α-hydroxyestrone. The optimised GC-MS/MS method produces increased selectivity and sensitivity compared to GC-MS, with limit of detection ranging from 0.01 to 0.49 ng L⁻¹ in water and from 0.05 to 0.14 ng g⁻¹ in sediment. Extraction from aqueous samples was performed by solid-phase extraction (SPE) and from sediment samples by microwave-assisted extraction (MAE). The improved method for the clean-up of sediment extracts carried out by SPE enhanced EDC recovery (86-102%) while reducing matrix interference and sample drying time. Derivatisation of final sample extracts was achieved using N,O-bis(trimethylsilyl)trifluoroacetamide and pyridine, and their stability was enhanced by reconstituting the derivatised extracts with hexane. The method was validated by spiking experiments which showed good recovery and reproducibility. The method was applied to samples taken from the Medway estuary in Kent, UK, where non-conservative behaviour of EDCs was demonstrated.     

GC-MS Studies on Derivatization of Creatinine and Creatine by BSTFA and Their Measurement in Human Urine

In consideration of its relatively constant urinary excretion rate, creatinine (2-amino-1-methyl-5H-imidazol-4-one, MW 113.1) in urine is a useful endogenous biochemical parameter to correct the urinary excretion rate of numerous endogenous and exogenous substances. Reliable measurement of creatinine by gas chromatography (GC)-based methods requires derivatization of its amine and keto groups. Creatinine exists in equilibrium with its open form creatine (methylguanidoacetic acid, MW 131.1), which has a guanidine and a carboxylic group. Trimethylsilylation and trifluoroacetylation of creatinine and creatine are the oldest reported derivatization methods for their GC-mass spectrometry (MS) analysis in human serum using flame- or electron-ionization. We performed GC-MS studies on the derivatization of creatinine (d₀-creatinine), [methylo-²H₃]creatinine (d₃-creatinine, internal standard) and creatine (d₀-creatine) with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) using standard derivatization conditions (60 min, 60 °C), yet in the absence of any base. Reaction products were characterized both in the negative-ion chemical ionization (NICI) and in the positive-ion chemical ionization (PICI) mode. Creatinine and creatine reacted with BSTFA to form several derivatives. Their early eluting N,N,O-tris(trimethylsilyl) derivatives (8.9 min) were found to be useful for the precise and accurate measurement of the sum of creatinine and creatine in human urine (10 µL, up to 20 mM) by selected-ion monitoring (SIM) of m/z 271 (d₀-creatinine/d₀-creatine) and m/z 274 (d₃-creatinine) in the NICI mode. In the PICI mode, SIM of m/z 256, m/z 259, m/z 272 and m/z 275 was performed. BSTFA derivatization of d₀-creatine from a freshly prepared solution in distilled water resulted in formation of two lMate-eluting derivatives (14.08 min, 14.72 min), presumably creatinyl-creatinine, with the creatininyl residue existing in its enol form (14.08 min) and keto form (14.72 min). Our results suggest that BSTFA derivatization does not allow specific analysis of creatine and creatinine by GC-MS. Preliminary analyses suggest that pentafluoropropionic anhydride (PFPA) is also not useful for the measurement of creatinine in the presence of creatine. Both BSTFA and PFPA facilitate the conversion of creatine to creatinine. Specific measurement of creatinine in urine is possible by using pentafluorobenzyl bromide in aqueous acetone.     

Quantitative Determination of Cyclobutane Thymine Dimers in DNA by Stable Isotope-Dilution Mass Spectrometry

In order to understand the role of UV-induced DNA lesions in biological processes such as mutagenesis and carcinogenesis, it is essential to detect and quantify DNA damage in cells. In this paper we present a novel and both highly selective and sensitive assay using capillary gas chromatography (GC) combined with mass spectrometry (MS) for the detection and accurate quantitation of a major product of UV-induced DNA damage (cissyn cyclobutadithymine). Quantitation of the cyclobutane thymine dimer was achieved by the use of an internal standard in the form of a stable ²H-labeled analogue. Both isotopically labeled and nonlabeled dimers were prepared directly from their corresponding monomers. Each was identified as their trimethylsilyl ether derivative by GC-MS. Calibration plots were obtained for known quantities of both nonlabeled analyte and internal standard. Quantitation of cis-syn cyclobutadithymine was demonstrated in DNA exposed to UVC radiation over a dose range of 0 to 3500 J m^?2. Under the conditions used, the limit of detection was found to be 20–50 fmol on column (equivalent to 0.02–0.05 nmol dimer per mg DNA). The results of the present study indicate that capillary GC-MS is an ideally suited technique for selective and sensitive quantification of cis-syn cyclobutadithymine in DNA and hence UV-induced DNA damage.     

Screening of amino acids in dried blood spots by stable isotope derivatization-liquid chromatography-electrospray ionization mass spectrometry

Direct infusion mass spectrometry (DIMS) is a powerful technique in clinical diagnosis for screening neonatal amino acid metabolic disorders from dried blood spots (DBS). However, DIMS sometimes generated false-positive results for analysis of amino acids. In this work, we utilized a stable isotope derivatization method, combining with liquid chromatography tandem mass spectrometry (SID-LC-MS), to improve the specificity for screening amino acids in DBS specimens. A pair of isotope reagents, p-(dimethylamino)phenyl isothiocyanate (DMAP-NCS) and 4-isothiocyanato-N,N-bis(methyl-[²H₂])aniline ([²H₄]DMAP-NCS), was synthesized and used to label amino acids in DBS specimens. The [²H₄]DMAP-NCS labelled amino acid standards were used as internal standards to compensate the matrix effect. This method was validated by measuring linearity, recovery and accuracy. The results showed that the developed SID-LC-MS method can be used for sensitive and selective determination of 12 diagnostically important amino acids in DBS specimens.     

Determination of the enrichment of isotopically labelled molecules by mass spectrometry

A general method for the determination of the enrichment of isotopically labelled molecules by mass spectrometry (MS) is described. In contrast to other published procedures, the method described here takes into account and corrects for measurement errors such as the contribution at M ? 1 due to loss of hydrogen or lack of spectral resolution and provides an uncertainty value for the determined enrichment. The general procedure requires the following steps: (1) evaluation of linearity in the mass spectrometer by injecting the natural abundance compound at different concentration levels, (2) determination of the purity of the mass cluster using the natural abundance analogue, (3) calculation of the theoretical isotope composition of the labelled compound using different tentative isotope enrichments, (4) calculation of ‘convoluted’ isotope distributions for the labelled compound taking into account the purity of the mass cluster determined with the natural abundance analogue and (5) comparison of the isotope distributions measured for the labelled compound with those calculated for different isotope enrichments using linear regression. The method was applied to a series of commercially available ¹³C‐ and ²H‐labelled compounds and to a suite of singly ¹³C‐labelled β₂‐agonist prepared in‐house both by gas chromatography (GC)–MS, GC–tandem MS (MS/MS) and liquid chromatography–MS/MS with satisfactory results. It was observed that the main uncertainty source for the isotope enrichment was the uncertainty in the purity of the measured cluster as determined with the natural abundance compound. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct determination of melamine in dairy products by gas chromatography/mass spectrometry with coupled column separation

A coupled capillary column system was developed for the qualitative and quantitative determination of melamine with isotope internal standard in dairy products by gas chromatography/mass spectrometry (GC/MS) without derivatization. A 30 m of DB-5ms ((5%-phenyl)-methylpolysiloxane, 0.25 mm i.d., 0.25 μm df) coupled with a 1.5 m of Innowax (polyethylene glycol, 0.32 mm i.d., 0.25 μm df) by a quartz capillary column connector was introduced as separation column. Three advantages were discussed for the coupled system. The sample was fortified with a ring-labeled ¹³C₃¹⁵N₃-melamine as an isotope internal standard and extracted by 1% of trichloroacetic acid aqueous solution. 2.2% of lead acetate solution was then added to deposit protein in the sample matrix. After purification by cation exchange cartridge, the sample solution was directly injected and detected by GC/MS. A six-point calibration curve ranging from 0.05 to 2 mg kg⁻¹ of melamine in sample was used to establish instrument response. The recovery was 93.9-102% with relative standard deviation from 3.1 to 8.7% when isotope internal standard used. The calculated method detection limit was 0.01 mg kg⁻¹.     

Internal correction of spectral interferences and mass bias for selenium metabolism studies using enriched stable isotopes in combination with multiple linear regression

The analytical methodology for the in vivo study of selenium metabolism using two enriched selenium isotopes has been modified, allowing for the internal correction of spectral interferences and mass bias both for total selenium and speciation analysis. The method is based on the combination of an already described dual-isotope procedure with a new data treatment strategy based on multiple linear regression. A metabolic enriched isotope (⁷⁷Se) is given orally to the test subject and a second isotope (⁷⁴Se) is employed for quantification. In our approach, all possible polyatomic interferences occurring in the measurement of the isotope composition of selenium by collision cell quadrupole ICP-MS are taken into account and their relative contribution calculated by multiple linear regression after minimisation of the residuals. As a result, all spectral interferences and mass bias are corrected internally allowing the fast and independent quantification of natural abundance selenium (^natSe) and enriched ⁷⁷Se. In this sense, the calculation of the tracer/tracee ratio in each sample is straightforward. The method has been applied to study the time-related tissue incorporation of ⁷⁷Se in male Wistar rats while maintaining the ^natSe steady-state conditions. Additionally, metabolically relevant information such as selenoprotein synthesis and selenium elimination in urine could be studied using the proposed methodology. In this case, serum proteins were separated by affinity chromatography while reverse phase was employed for urine metabolites. In both cases, ⁷⁴Se was used as a post-column isotope dilution spike. The application of multiple linear regression to the whole chromatogram allowed us to calculate the contribution of bromine hydride, selenium hydride, argon polyatomics and mass bias on the observed selenium isotope patterns. By minimising the square sum of residuals for the whole chromatogram, internal correction of spectral interferences and mass bias could be accomplished. As a result, the tracer/tracee ratio could be calculated for each selenium-containing species and a time relationship for synthesis and degradation established. Both selenite and selenized yeast labelled with ⁷⁷Se were employed for comparative purposes.     

A mass spectrometric study of the dimethyl ester trimethylsilyl enol ether derivatives of some 3-oxodicarboxylic acids

The fragmentation pathways for the dimethyl ester trimethylsilyl enol ether derivatives of some 3-oxodicarboxylic acids have been found by using B/E and B²/E linked scans, collisional activated decomposition and isotope substitution techniques. The trimethylsilyloxy group strongly directs the decomposition processes, and induces a fragmentation pattern that intimately reflects the structure of the compounds.