Isolation,spectra, structure,and ring-opening polymerization of strained macrocyclic aryl(ether ketone) dimer

Macrocyclic arylene ether ketone dimer was isolated from a mixture of cyclic oligomers obtained by the nucleophilic substitution reaction of bisphenol A and 4,4′-difluorobenzophenone and easily polymerized to high molecular weight linear poly-(ether ketone). The cyclic compound was characterized by FTIR, ¹H- and ¹³C-NMR, and single-crystal x-ray diffraction. Analysis of the spectral and crystal structure reveals extreme distortions of the phenyl rings attached to the isopropylidene center and of the turning points of the molecular polygons. The release of the ring strain on ring-opening combined with entropical difference between the linear polymer chain and the more rigid macrocycle at temperatures of polymerization may be the proposed motivating factors in the polymerization of this precursor to high molecular weight poly(ether ketone). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1753–1761, 1997     

Synthesis,characterization, and ring-opening polymerization of novel high Tg macrocyclic oligomers based on 1,2-dihydro-4-(4-hydroxyphenyl)(2H)- phthalazin-1-one

Preparation of novel high T_g (220–280°C) macrocyclic oligomers in high yield by the reaction of 1,2-dihydro-4-(4-hydroxyphenyl)(2H)phthalazin-1-one with activated difluoro-monomers is described. The reaction, conducted under pseudo-high dilution conditions, produces cyclic oligomers in 90–97% isolated yield. Detailed structural characterization of these novel oligomers by the combination of NMR, MALDI–TOF–MS, GPC, and reverse-phase HPLC confirm the cyclic nature and reveal the composition of these cyclic oligomers. MALDI–TOF–MS which enables the detection of oligomers with mass up to 6000 Da, is shown to be a very powerful tool for determination of and the proof of the cyclic nature of the cyclic oligomers. The MALDI results provide answers to the possible combinations of monomer units in the cyclic oligomeric components for random co-cyclic oligomers. Rheological measurement of cyclic oligomers 3c shows that the cyclic oligomers are thermally stable in the melt and the molten cyclic oligomers essentially behave like Newtonian fluids. At 340°C and 100 s⁻¹ the steady-state shear viscosity of the molten cyclic oligomers 3c is only about 14 poise. Ring-opening polymerization of the co-cyclic oligomers 4 to a high molecular weight polymer with M_w = 87,000 is achieved by heating at 340°C for 45 min in the presence of a nucleophilic initiator. © 1996 John Wiley & Sons, Inc.     

Ring-opening polymerization of macrocyclic aryl ether ketone oligomers containing the 1,2-dibenzoylbenzene moiety

Facile ring-opening polymerization of cyclic aryl ether oligomers containing the 1,2-dibenzoylbenzene moiety to form high molecular weight linear polymers in the presence of a nucleophilic initiator is described. The polymerization can be initiated in the melt in the presence of a nucleophilic initiator such as potassium carbonate, cesium fluoride, and alkali phenoxides. Various alkali phenoxides were investigated as potential nucleophilic initiators. The polymerization reaction rate in the melt increases in the order of K⁺ > Na⁺ > Cs⁺, and in the order of ⁻OPhPhO⁻ > PhO⁻ > PhOPhO⁻ > PhPhO⁻. However, the polymerization in an aprotic dipolar solvent is faster in the presence of cesium phenoxide than in the presence of potassium phenoxide. Polymerization of the cyclic oligomers in solution demonstrates that the ring-opening polymerization proceeds via a chain-growth mechanism and involves a transetherification reaction between linear and cyclic aryl ether oligomers. The ring-chain equilibrium is much more favorable towards linear polymers. Since little or no ring strain exists in the cyclic system, the transetherification reactions are indiscriminate with regards to cyclic or linear chains and the interchain equilibration is also a facile process during polymerization. This intermolecular transetherification has been demonstrated by using low molecular weight aryl ethers to control the molecular weight of the polymer formed via ring-opening polymerization. © 1996 John Wiley & Sons, Inc.     

Synthesis and ring-opening polymerization of new 1,4-anhydro-glucopyranose derivatives

Three new 1,4-anhydro-glucopyranose derivatives having different hydroxyl protective groups such as 1,4-anhydro-2,3,6-tri-O-methyl-α-D -glucopyranose (AMGLU), 1,4-anhydro-6-O-benzyl-2,3-di-O-methyl-α-D -glucopyranose (A6BMG), and 1,4-anhydro-2,3-di-O-methyl-6-O-trityl-α-D -glucopyranose (A6TMG) were synthesized from methyl α-D -glucopyranoside in good yields. Their polymerizability was compared with that of 1,4-anhydro-2,3,6-tri-O-benzyl-α-D -glucopyranose (ABGLU) reported previously. The trimethylated monomer, AMGLU, was polymerized by a PF₅ catalyst to give 1,5-α-furanosidic polymer having number-average molecular weights (M̄_n) in the range of 2.8 × 10³ to 6.8 × 10³. The ¹³C-NMR spectrum was compared with that of methylated amylose and cellulose. Other anhydro monomers, A6BMG and A6TMG, gave the corresponding 1,5-α furanosidic polymers having M̄_n = 17.1 × 10³ and 1.8 × 10³, respectively. Thus, the substituents at the C2 and C6 positions were found to play an important role for the ring-opening polymerizability of the 1,4-anhydro-glucose monomers. In addition, debenzylation of the tribenzylated polymer gave free (1 → 5)-α-D -glucofuranan. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 841–850, 1998     

Synthesis and radical ring-opening polymerization behavior of vinylcyclopropane bearing six-membered cyclic acetal moiety

Synthesis and radical ring-opening polymerization of vinylcyclopropane bearing six-membered cyclic acetal moiety, 1-vinyl-4,8-dioxaspiro[2.5]octane (1), were carried out. 1 was prepared by the reaction of 1,1-dichloro-2-vinylcyclopropane and 1,3-propanediol in DMF in the presence of a base. Radical polymerization of 1 was carried out in the presence of an appropriate initiator (3 mol % vs. 1) at 60 and 120°C in degassed sealed ampoules for 20 h. A colorless transparent viscous polymer was obtained by the isolation with preparative HPLC. The structure of poly(1) was determined to consist of two 1,5-ring-opened units and a unit bearing no olefinic moiety. The difference of the activation energies for the ring-opening reaction of the cyclopropane ring calculated by the molecular orbital method could explain the selectivity in the direction of the cleavage of the cyclopropane ring. Acid hydrolysis of poly(1) afforded the corresponding polyketone in quantitative conversion. © 1996 John Wiley & Sons, Inc.     

Synthesis of functional polycarbonates by lipase-catalyzed ring-opening polymerization

Poly(5-benzyloxy-trimethylene carbonate) (PBTMC), a new functional polycarbonate was synthesized by enzymatic ring-opening polymerization in bulk at 150°C using Porcine pancreas lipase (PPL) or Candida rugosa lipase (CL) as catalyst. Influences of different polymerization conditions such as the source of enzyme, enzyme concentration and polymerization time on the molecular weight and yield were studied. The results showed that PPL exhibited higher activity than CL. Both higher molecular weight(Mn, 18953) and yield(98%) could be obtained by the use of PPL as catalyst. ¹H NMR spectrum showed no decarboxylation occurrence during the ring-opening polymerization.     

Phenolic materials via ring-opening polymerization: Synthesis and characterization of bisphenol-A based benzoxazines and their polymers

Compounds with bifunctional benzoxazine groups in their molecular structures form crosslinked structures characteristic of phenolic materials through a ring-opening reaction mechanism. This family of compounds offers greater flexibility than conventional novolac or resole resins in terms of molecular design. It is also superior to conventional phenolic resin in process control since it releases no by-product during curing reactions. The materials thus obtained exhibit excellent mechanical integrity with glass transition temperatures over 200°C. The synthesis, composition, and structural analysis of precursors based on bisphenol-A are discussed herein. © 1994 John Wiley & Sons, Inc.     

Anionic ring-opening polymerization behavior of trans-cyclohexene carbonate using metal tert-butoxides: Construction of living anionic ring-opening polymerization by lithium tert-butoxide

Anionic ring-opening polymerization (ROP) behavior of trans-cyclohexene carbonate (CHC) using metal alkoxides as initiators was investigated. As a result, lithium tert-butoxide-initiated ROP of CHC with a high-monomer concentration (10 M) at low temperature (−15 to −10°C) proceeded to afford a poly(trans-cyclohexene carbonate) (PCHC) without undesired side reactions such as mainly backbiting. The suppression of side reactions enables the control of the molecular weight (M_n = 2400–6100) of PCHC with low molar-mass dispersity values (M_w/M_n = 1.16–1.22). Furthermore, by increasing the feed ratio of the monomer to the initiator, the molecular weight increases proportionally, indicating a controllable polymerization. The results of a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a kinetic study, and a chain extension experiment suggested a living nature of this ROP using lithium tert-butoxide.     

Ultrafast organocatalytic ring-opening polymerization of N-sulfonyl aziridine in the melt

An ultrafast approach for controlled synthesis of well-defined polysulfonamides is established through organocatalytic anionic ring-opening polymerization (ROP) of N-sulfonyl aziridine in the melt. Several different organobases are investigated, and it is found that N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyzed ROP of 2-methyl-N-tosylaziridine (TsMAz) gives the desired polymer, while 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) initiate the polymerization along with initiator to produce uncontrolled polymers. Using PMDETA as the catalyst, poly(2-methyl-N-tosylaziridine) with molecular weight over 100 kg/mol can be synthesized in less than 90 s. Various initiators, including carboxylic acid, N-sulfonyl amide, unactivated amine, phenol, and thiol, are applicable for this protocol to give the molecular weight and end-group controlled polymers under the open-flask condition. Combining this ultrafast ROP with ring-opening metathesis polymerization (ROMP), a brush copolymer is facile synthesized. This approach allows the ultrafast metal-free synthesis of polysulfonamide and expands the scope of initiators for the ROP of N-sulfonyl aziridines.     

Cationic ring-opening polymerization of bicyclic amide acetals

Various bicyclic amide acetals were synthesized from the cycloaddition reactions of 2-substituted-2-oxazolines with styrene oxide. Ring-opening polymerization of the bicyclic amide acetals occurred upon heating in the presence of methyl tosylate. Characterization of the bicyclic amide acetals and their polymers was accomplished by NMR and elemental analysis. Vapor pressure osmometry showed the highest polymer molecular weight was only 2,400. The mechanisms for cycloaddition and polymerization are discussed. © 1994 John Wiley & Sons, Inc.     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Radical ring-opening polymerization of lipoates: Kinetic and thermodynamic aspects

The radical ring-opening polymerization of a lipoate-based monomer, ethyl lipoate, in bulk and in solution was studied at various temperatures and it was found that in all cases, only limited (plateau) conversions were reached, which were lower at higher temperatures and/or at higher dilutions. It was established that a monomer-polymer equilibrium exists with a corresponding ceiling temperature of 139°C. Due to the reversibility of the lipoate polymerization, when poly(ethyl lipoate) was heated to 150°C, it degraded and within 3 h, the molecular weight decreased to less than 15% of the initial value. Likewise, when the polymer was dissolved in anisole and a radical initiator was added, degradation was observed even at 60°C and it became increasingly pronounced at higher concentrations of the radical source. Due to the presence of multiple disulfide groups in the backbone, poly(ethyl lipoate) also degraded in the presence of reducing agents, such as tributylphosphine, yielding the reduced (dithiol) form of the monomer, ethyl dihydrolipoate.     

Synthesis of dendritic–linear block copolymers by living ring-opening polymerization of lactones and lactides using dendritic initiators

Polyether dendrons have been successfully used as macroinitiators for the living ring-opening polymerization (ROP) of lactones and lactides. A hydroxyl group located at the focal point of dendrimers of different generations was transformed into diethyl aluminum alkoxides by reaction with triethyl aluminum. The dendritic aluminum alkoxides proved to be efficient macroinitiators for the living ROP of ε-caprolactone (εCL), 1,4,8-trioxa(4,6)spiro[9]undecanone (TOSUO), D ,L - and L ,L -lactide. Formation of these block copolymers of unusual macromolecular architecture was supported by size exclusion chromatography and spectroscopy. The versatility of this synthetic approach allowed ω-functional dendrimer block-polyesters, such as macromonomer, and macromolecules with novel architectures, to be prepared. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1923–1930, 1999     

Phenolic materials via ring-opening polymerization of benzoxazines: Effect of molecular structure on mechanical and dynamic mechanical properties

A series of benzoxazine compounds have been prepared from different bifunctional phenols and primary amines and the molecular compositions of the precursors are characterized by nuclear magnetic resonance, Fourier transform infrared, and size exclusion chromatography. It has been demonstrated that by design of the molecular structures of the benzoxazine precursors, therefore by tailoring of the network molecular architectures, new phenolic materials with superior mechanical and thermal properties, and ease-of-processing characteristics can be obtained. The characteristics of dynamic mechanical spectra of the phenolic materials are studied and related to their structural features. © 1994 John Wiley & Sons, Inc.     

Synthesis of degradable molecular brushes via a combination of ring-opening polymerization and click chemistry

Acid-degradable molecular brushes with polycarbonate backbone and densely grafted side chains (∼1.9 SCs per backbone repeating unit) were synthesized for the first time using the grafting-onto method. Extremely efficient copper-catalyzed azide-alkyne cycloaddition click reactions between the polycarbonate backbone containing two pendant azido groups per backbone unit and alkynyl-terminated poly (methyl acrylate) (ay-PMA₇₂, average degree of polymerization DP = 72) SCs were demonstrated to finish in 10 min with a quantitative conversion of the azido groups. Similar grafting efficiencies were also achieved when using alkynyl-terminated polystyrene (ay-PS), poly(ethylene oxide) (ay-PEO), and poly (t-butyl acrylate)-b-polystyrene (ay-PtBA-b-PS) to successfully prepare molecular brushes with high grafting density (>1.8 SCs per backbone repeating unit). Under acidic condition, the polycarbonate backbones were completely degradable and the final degraded product of the molecular brushes was a linear polymer chain with molecular weight two times of the SCs. When a mixture of hydrophobic ay-PS and hydrophilic ay-PEO chains was used, amphiphilic heterobrushes PC-g-(PS-co-PEO) were synthesized, which could self-assemble into micelles or vesicles in selective solvents, depending on the ratio of the two SCs in the brush. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 239–248     

Synthesis and crystal structure of Mn(II) complexes with novel macrocyclic Schiff-base ligands containing piperazine moiety

A series of Mn(II) macrocyclic Schiff-base complexes [MnLⁿCl]⁺ (n = 1–4) have been prepared via the Mn(II) templated [1+1] cyclocondensation of 2,6-diacetylpyridine or 2,6-pyridinedicarbaldehyde with the symmetrical 1,4-bis(3-aminopropyl)piperazine or the novel asymmetrical N,N′(2-aminoethyl)(3-aminopropyl)piperazine linear amines containing piperazine moiety. The complexes have been characterized by elemental analyses, IR, FAB-MS, magnetic studies and conductivity measurements. The crystal structure of [MnL²(CH₃OH)Cl](ClO₄) and [MnL⁴Cl](PF₆) complexes have also been determined showing the metal ion in a N₄OCl pentagonal bipyramidal or N₄Cl highly distorted octahedral geometry, respectively.     

Polymerizability of norbornene in ring-opening metathesis polymerization initiated by Mo-based complexes

Concerning the study on the relation between structural parameters and reactivity in ring-opening metathesis polymerization of cyclo-olefins, the “living” polymerization of norbornene initiated by Schrock's-type complexes was considered as a reference and studied from the kinetic point of view. First kinetic orders with respect to both monomer and active species allow the values of absolute rate constants of propagation to be determined. The thermodynamic parameters obtained from kinetic experiments performed at different temperatures seem to indicate that monomer coordination and metallacycle formation are rate-determining steps in the process studied. © 1994 John Wiley & Sons, Inc.     

Amphiphilic well-defined degradable star block copolymers by combination of ring-opening polymerization and atom transfer radical polymerization: Synthesis and application as drug delivery carriers

Atom transfer radical polymerization (ATRP) is one of the most popular advanced polymerization techniques in macromolecular science, allowing the synthesis of tailor-made polymers with controlled molecular weight, architecture, composition, and functionality. The combination of ATRP and ring-opening polymerization (ROP) provides a straightforward route for the preparation of polymers exhibiting both targeted and well-defined features and biodegradability, which is very interesting for the development of new materials for biomedical applications. Among the different types of polymer architectures, amphiphilic star block copolymers (BCPs) represent a very attractive one, due to their high degree of functionality at the molecular surface, low hydrodynamic volume and higher encapsulation ability, compared to molecular systems based on linear polymers. This review article highlights the research focused on the synthesis of amphiphilic well-defined degradable star BCPs by combination of ROP and ATRP, with particular focus on the development of polymers for biomedical applications, such as anticancer drug delivery, diagnosis therapy, or photodynamic therapy, which is the most investigated field regarding these polymers.