Extraction of rhodium(III) by a bisacylated diethylenetriamine derivative from hydrochloric acid solutions

The extraction of rhodium(III) with a bisacylated diethylenetriamine derivative from hydrochloric acid solutions was studied. Optimum conditions for rhodium(III) extraction were determined. It was found that, at a contact time to 10 min, the extraction occurred by an ion-association mechanism. At a contact time longer than 10 min, rhodium(III) was extracted by a mixed mechanism with the insertion of an extractant molecule into the inner coordination sphere of the rhodium(III) ion. The composition of the extracted compound was determined using electronic, ¹H and ¹³C NMR, and IR spectroscopy and elemental analysis, and the structure of this compound was proposed.     

Solvent Extraction Separation of Iridium(III) from Rhodium(III) by N-n-Octylaniline

The use ofN-n-octylaniline for the extraction of iridium(III) from malonate media is studied at pH 8.5. Iridium(III) extracted in the organic phase was stripped with 2.0 M hydrochloric acid and was determined spectrophotometrically by the stannous chloride–hydrobromic acid method at 385 nm. The extraction system is studied as a function of the equilibration time, diluent, reagent concentration and diverse ions. Experimental data have been analyzed graphically to determine the stoichiometry of the extracted species. It was found that the extraction of iridium(III) proceeds by an anion exchange mechanism and transforms into the extracted species [RR"NH₂ ⁺Ir(C₃H₂O₄)₂ ^–]_org. The method is simple, rapid, and selective and has been devised for the sequential separation of iridium(III) from rhodium(III), not only from each other, but also from other accompanying Platinum Group Metals (PGMs), Au(III), and base metals.     

Liquid-liquid extraction of rhodium(III) from hydrochloric acid solutions with 1,2,4-triazole derivative

Liquid-liquid extraction of rhodium(III) from hydrochloric acid solutions with a 1,2,4-triazole derivative was studied. Optimal conditions for its recovery were found. Rhodium(III) was shown to be recovered in extraction system by ion-exchange reaction at the time of phase contact not longer than 5 min. When phase contact time increased, rhodium(III) is extracted by a mixed mechanism with simultaneous insertion of two extractant molecules into the inner coordination sphere of rhodium(III) ion. Composition of coordination species of recovered compounds was established by electronic, IR, ¹H and ¹³C NMR spectroscopy and functional analysis, the structure of the coordination species is proposed.     

Polyurethane foams as selective sorbents for noble metals : Quantitative extraction and separation of rhodium from iridium in hydrochloric acid containing tin(II) chloride

The distribution of rhodium(III) between polyether-type polyurethane foam and 0.5–5.0 mol dm^?3 hydrochloric acid in the presence of small amounts of tin(II) chloride is described. The distribution of rhodium is affected by the extraction temperature, acid concentration and the Sn(II):Rh ratio. The capacity of the polyurethane foam for rhodium is in excess of 0.5 mmol g^?1. Rhodium is presumably sorbed in the form of a chloro(trichlorostannato)rhodium(III/I) complex anion. Iridium is not extracted by the foam under corresponding conditions and can be separated quantitatively from rhodium.     

Extraction of rhodium(III) with sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with dihexyl sulfoxide (DHSO) and with petroleum sulfoxides (PSOs) was studied, and the optimal conditions for its recovery were found. At a phase contact time of up to 0.5 h, the extraction of rhodium(III) with sulfoxides occurred mainly by an ionassociation scenario. If the phase contact time exceeds 0.5 h, a mixed extraction scenario predominated to form the extracted complexes (L · H⁺) · [RhCl₄L₂]-(DHSO)_o and PSO (LH⁺) · [RhCl₄(H₂O) · L]⁻. The protonation of the extraction agents occurred at the donor oxygen atoms of the sulfoxide group. When rhodium was extracted with PSOs, the coordination of the extractant molecule in the inner coordination sphere of the acido complex to the metal ion occurred through the donor sulfur atom of the sulfoxide group, while with the use of DHSO, through the donor atoms of sulfur and oxygen of the sulfoxide group. Electronic, ¹H NMR, and IR spectroscopy and elemental analysis were used to determine the composition of the extracted compounds and suggest their structure.     

Extraction of rhodium and iridium with 4-(non-5-yl) pyridine

The extraction of rhodium and iridium with 4-(non-5-yl)pyridine (NP) was investigated. The rate of rhodium extraction increases with increasing concentration of NP and chloride ions. Spectroscopic studies indicate that the extracted species is an ion pair, RhCl^3?₆ 3HNP⁺. Under the conditions of optimum Rh extraction ([Cl^?]=3.7 M, [NP]=0.3 M, [H]=0.08 M), iridium is also extracted by NP with similar efficiency in the form of IrCl^3?₆ 3HNP⁺. The use of hypophosphorous acid to labilize rhodium results in a better extraction of rhodium without significantly changing the extraction of iridium. The efficiency and kinetics of the rhodium extraction improve with increasing chloride concentration. For [Cl^?] ? 3.7 M, [H₃PO₂]=2.5 M, [NP]=0.3 M and Ph ≈ 1.6, 82% of rhodium is extracted in 4 min and 95% in 30 min.     

Extraction of rhodium(III) with petroleum sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with petroleum sulfoxides was studied. The optimal conditions of its recovery were found. The composition and structure of the compound being extracted was determined by electronic absorption, ¹H NMR, and IR spectroscopies and elemental analysis.     

Solvent extraction of rhodium,ruthenium, and iridium with HDEHP

Solvent extraction of rhodium, ruthenium, and iridium with HDEHP from thioureachloride media was investigated. Under the conditions ([Cl^–]=0.50 M, [HDEHP]=1.0M, [SC(NH₂)₂]=0.50M, pH=4.50, phase contact time 1 min), Rh(III) is extracted 88.3%, Ru(III) and Ir(III) 40.8% and 28.5% respectively at phase ratio 11. The formation of rhodium-thiourea complexes in aqueous solutions, even at 5M chloride concentration, with the possible composition Rh[SC (NH₂)₂]₆ ³⁺ is confirmed by the observed molar ratio of thiourea to rhodium and UV-spectra.     

Solvent extraction of trivalent indium from succinate solution by 2-octylaminopyridine in chloroform

Extraction processes of indium(III) with 2-octylaminopyridine (2-OAP) from media of various complexing ability, succinate and salicylate, in chloroform have been elucidated. The ion-pair complex has also quantitative extraction in xylene and 1,2-dichloroethane. Indium(III) from organic phase was stripped with 1.0 M hydrochloric acid and determined complexometrically with EDTA. The stoichiometry of the extracted species was found out on the basis of slope analysis. The extraction of indium(III) proceeds by an anion exchange mechanism and the extracted species is [RR′NH₂ ⁺In(succinate)₂ ^-]_(org). Temperature dependence of the extraction equilibrium constant was also examined to estimate the apparent thermodynamic functions (ΔH, ΔG and ΔS) for extraction reaction. It is possible to separate indium(III) from Zn(II), Cd(II), Pb(II), Hg(II), Bi(III), Tl(I), Tl(III), Ga(III), Al(III), Te(IV), Se(IV), Sb(III), Fe(III) and Sn(IV). The method is simple, rapid and reproducible and can be used to determine the indium from samples like alloys.     

Separation of rhodium from ruthenium and iridium by fast solvent extraction with HDEHP

Solvent extraction of rhodium, ruthenium and iridium with di(2-ethylhexyl)phosphoric acid (HDEHP) has been investigated. Under the conditions [Cl^–1]=0.20M, [(HDEHP)₂]=0.30M, pH 4.05, phase contact time 1 minutes, Rh(III) is extracted 90.7%, Ru(III) and Ir(III) 20.0% and 11.5%, respectively, at phase ratio 11. The distribution ratio of rhodium is proportional to [(HDEHP)₂]³ for a freshly prepared aqueous phase with low chloride concentration but might drop to [(HDEHP)₂]^1to2 for an aqueous phase high in chloride concentration and after standing. The spectroscopic studies indicate that the extracted compound of rhodium is Rh(H₂O)_6–x Cl _x [H(DEHP)₂]_3–x (x=0, 1, 2).     

Separation of trace amounts of rhodium(III) with tri-n-butyl phosphate from nitric acid and sodium trichloroacetate media

A new method for the quantitative extraction and separation of trace amounts of rhodium from nitric acid and sodium trichloroacetate media has been established based on the formation of an ion-association complex of hexahydrated rhodium cation Rh(H₂O)₆ ³⁺ and the trichloroacetate (TCA) anion in tri-n-butyl phosphate (TBP). The effect of various factors (solvent, pH, sodium trichloroacetate, shaking time, phase volume ratio, composition of the extracted species, foreign ions, transformation of rhodium chlorocomplexes into hexahydrated cation, etc.) on the extraction and back-extraction of rhodium has been investigated. The method can be combined with subsequent FAAS determination of rhodium. The procedure was applied to determine rhodium traces in chloroplatinic acid and palladium chloride. Received: 17 March 2000 / Revised: 15 May 2000 / Accepted: 19 May 2000     

Solid-phase condensation of rhodium(III) aqua sulfates

Solid-phase condensation of rhodium(III) aqua sulfates yielding oligomeric rhodium(III) aqua sulfate complexes was revealed. The isothermal dehydration of rhodium(III) aqua sulfates under thermal diffusion conditions in the temperature range 100–130°C was studied, and effective rate constants and activation energies were determined. The solid phases of dehydration products were studied by X-ray powder diffraction and IR spectroscopy, and solutions of polymeric phases were studied by ¹⁰³Rh and ¹⁷O NMR, electronic absorption spectroscopy, chromatography, and electrophoresis.     

Flame atomic absorption spectrometry for the determination of trace amount of rhodium after separation and preconcentration onto modified multiwalled carbon nanotubes as a new solid sorbent

The present article reports on the application of modified multiwalled carbon nanotubes (MMWCNTs) as a new, easily prepared and stable solid sorbent for the preconcentration of trace rhodium ion in aqueous solution. Rhodium ions were complexed with 1-(2-pyridylazo)-2-naphthol (PAN) in the pH range of 3.2-4.7 and then the formed Rh-PAN complex was adsorbed on the oxidized MWCNTs. The adsorbed complex was eluted from MWCNTs sorbent with 5.0 mL of N,N-dimethylformamide (DMF). The rhodium in eluted solution was determined by flame atomic absorption spectrometry (FAAS). Linear range for the determination of rhodium was maintained between 0.16 ng mL⁻¹ and 25.0 μg mL⁻¹ in initial solution. Relative standard deviation for the 10 replicated determination of 4.0 μg mL⁻¹ of rhodium was ±0.97%. Detection limit was 0.010 ng mL⁻¹ in initial solution (3S_bl, n = 10) and preconcentration factor was 120. Sensitivity for 1% absorbance of rhodium (III) was 0.112 μg mL⁻¹. The sorption capacity of oxidized MWCNTs for Rh (III) was 6.6 mg g⁻¹. The effects of the experimental parameters, including the sample pH, flow rates of sample and eluent solution, eluent type, breakthrough volume and interference ions were studied for the preconcentration of Rh³⁺. The proposed method was successfully applied to the extraction and determination of rhodium in different samples.     

Extraction and concentration of palladium(II) from simulated refining process solutions using 1<Emphasis Type="Italic">Н</Emphasis>-1,2,4-triazole derivatives

A procedure was developed for recovery and concentration of residual palladium(II) from a “lean” refining solution by extraction with 1Н-1,2,4-triazole derivatives. Palladium(II) is extracted quantitatively from 1 M hydrochloric acid solutions and under optimum conditions is selectively separated from platinum(IV) and rhodium(III).     

Coagulation and heterocoagulation interactions of components in aqueous dispersed systems microcrystalline cellulose–TiO<Subscript>2</Subscript>, microcrystalline cellulose–TiOSO<Subscript>4</Subscript>, and TiO<Subscript>2</Subscript>–TiOSO<Subscript>4</Subscript>

A procedure was developed for recovery and concentration of residual palladium(II) from a “lean” refining solution by extraction with 1Н-1,2,4-triazole derivatives. Palladium(II) is extracted quantitatively from 1 M hydrochloric acid solutions and under optimum conditions is selectively separated from platinum(IV) and rhodium(III).     

Development of a Liquid‐liquid Extraction System for Rhodium(III) by 2‐octylaminopyridine from Weak Malonate Media

We have developed the extraction method of rhodium(III) from malonate media with 2‐octylaminopyridine (2‐OAP) in xylene at pH 8.0. The quantitative extraction of rhodium(III) with extractant was found by screening of different physicochemical parameters like malonate concentration, extractant concentration, pH, diluents, effect of temperature, aq: org phase ratio, loading capacity of 2‐OAP. The optimum condition was malonate=0.025 M, pH=8.0, 2‐OAP=0.05 M in xylene. The complete stripping of rhodium(III) from the loaded organic phase was carried out with 2 M HCl. Log‐log plot was investigated to determine the stoichiometry of the extracted species and it was found to be 1 : 2 : 1 (metal : acid :extractant). The versatility of the proposed method was checked for extraction and separation of rhodium(III) from binary, ternary mixture of associated metal ions as well as platinum group metals and from the synthetic solution of rhodium minerals and alloys.     

Monohydride-Dichloro Rhodium(III) Complexes with Chiral Diphosphine Ligands as Catalysts for Asymmetric Hydrogenation of Olefinic Substrates

We report full details of the synthesis and characterization of monohydride-dichloro rhodium(III) complexes bearing chiral diphosphine ligands, such as (S)-BINAP, (S)-DM-SEGPHOS, and (S)-DTBM-SEGPHOS, producing cationic triply chloride bridged dinuclear rhodium(III) complexes ( 1 a : (S)-BINAP; 1 b : (S)-DM-SEGPHOS) and a neutral mononuclear monohydride-dichloro rhodium(III) complex ( 1 c : (S)-DTBM-SEGPHOS) in high yield and high purity. Their solid state structure and solution behavior were determined by crystallographic studies as well as full spectral data, including DOSY NMR spectroscopy. Among these three complexes, 1 c has a rigid pocket surrounded by two chloride atoms bound to the rhodium atom together with one tBu group of (S)-DTBM-SEGPHOS for fitting to simple olefins without any coordinating functional groups. Complex 1 c exhibited superior catalytic activity and enantioselectivity for asymmetric hydrogenation of exo-olefins and olefinic substrates. The catalytic activity of 1 c was compared with that of well-demonstrated dihydride species derived in situ from rhodium(I) precursors such as [Rh(cod)Cl]₂ and [Rh(cod)₂]⁺[BF₄]⁻ upon mixing with (S)-DTBM-SEGPHOS under dihydrogen.     

Liquid–liquid extraction of neodymium (III) and europium (III) using synergic mixture of furosemide and tribenzylamine in benzyl alcohol

The extraction behavior of Nd(III) and Eu(III) with 0.05 mol dm⁻³ furosemide in benzyl alcohol as single acidic extractant and then with equimolar (0.05 mol dm⁻³) synergic mixture of furosemide as acidic extractant and tribenzylamine as neutral donor in benzyl alcohol has been studied from aqueous solutions of pH 1 to 6. The effect of various parameters and of various cations and anions on the extraction of these metal ions was investigated. The composition of the extracted adducts was determined by slope analysis method that came out to be [(M(FS)₂)⁺ (CH₃COO)⁻] and [M(FS)₃·3TBA] where M = Nd(III) and Eu(III).

     

A study of solid-state rhodium(III) sulfates

Solid-state rhodium(III) sulfates and their aqueous solutions were examined by IR and electronic absorption spectroscopy, thermogravimetry, X-ray powder diffraction analysis, and ¹⁰³Rh and ¹⁷O NMR spectroscopy. A study of the spontaneous aquation of freshly prepared solutions showed that this process results in an equilibrium between the subsystems of monomeric and oligomeric complexes. It was found that solid-state rhodium(III) sulfates vary in phase composition, basically consisting of dimeric and trimeric complexes.     

Liquid–liquid extraction of scandium with nalidixic acid in dichloromethane

The extraction behavior of nalidixic acid (HNA) in CH₂Cl₂ has been studied for various di- and trivalent metal ions such as Cu(II), Fe(II), Ni(II), Mn(II), Sb(II), Co(II), Sc(III), Y(III), Nd(III) and Eu(III) from aqueous buffer solutions of pH 1–7 with 0.1 mol dm⁻³ nalidixic acid in dichloromethane. Separation factors of Sc(III) from these metals has shown that its clean separation is possible at pH 3.4–4. The parameters affecting the extraction of Sc(III) were optimized. The composition of the extracted adduct was determined by slope analysis method that came out to be Sc(NA)₃. Extraction of Sc(III) was studied in the presence of various cations and anions. Among the anions studied only fluoride, citrate and oxalate have significant interference whereas, Fe(III) has reduced the extraction to 53% that can be removed by using ascorbic acid as reducing agent. The proposed extraction system proved good stability up to six extraction-stripping stages for the extraction of Sc(III).