Ion-chromatographic selectivity of polyelectrolyte sorbents based on some aliphatic and aromatic ionenes

An aliphatic ionene with hydroxyl group (2HP-8 ionene), mixed aliphatic-aromatic ionenes (3-X and 6-X ionenes), aromatic ionene (Ph-X ionene), and viologen (Dp-X ionene) - polymers with quaternary nitrogen atoms in the main chain served as modifiers in synthesising polyelectrolyte sorbents for ion chromatography. The selectivity of produced and several previously prepared anion exchangers was compared with those of aliphatic ionenes. It was found that aromatic ionenes having a rigid structure of polymer chains are similar to their aliphatic analogues with shorter chains with a high charge density. Polyelectrolyte sorbents based on aromatic ionenes show higher selectivity to aromatic acids (e.g., 1-naphthalenesulfonic acid) as compared with aliphatic ionenes due to specific pi-pi interactions.     

Preparation and ion chromatographic properties of a new core-shell chromatographic support Al2O3/SiO2-10

A new stationary phase Al₂O₃/SiO₂-10 was prepared and characterized by XPS, XRD, SEM and surface analysis. The anion exchanger properties of this new stationary phase were investigated by the separation of inorganic anions in ion chromatography (IC). pH of the mobile phase, concentration and strength of the Lewis base of the elute, and the organic modifier of the mobile phase strongly affect the separation of inorganic anions, and anion exchange selectivities of the analyte on the new support are significantly different from quaternary ammonium styrene based anion exchangers. The result of separation of inorganic anions shows that the new stationary phase provides excellent column efficiency, well-defined chromatographic peaks and favorable retention times.     

Separation of inorganic anions using a series of sulfobetaine exchangers

A set of five new sulfobetaine exchangers with inner quaternary amines and outer sulfonic acids have been prepared. A series of zwitterionic precursors was attached to highly porous divinylbenzene polymer using a grafting reaction, which allows a flexible adjustment of the degree of functionalisation. The resulting materials have identical spacers to the polymeric backbone and differ only in chain length between the charged functional groups. Capacities of the stationary phases were analysed by two different methods based on elemental analysis and the results obtained were found to correlate. The application of combustion elemental analysis proved an identical molar content of sulfur and nitrogen. The distance between the charged functional groups is varied from one to five methylene groups for a better understanding of the retention behaviour of inorganic anions on zwitterionic stationary phases. Inorganic anions were separated using sodium acetate eluents with varying ionic strength and pH and the behaviour of all columns has been compared to each other and to ZIC-HILIC and ZIC-pHILIC columns from Merck SeQuant. The exchangers with two and five methylene groups between the charges showed the highest retention factors. Polarity and accessibility of the anion exchange sites are dependent on the distance between the charged groups and the flexibility of the chains. These properties have a strong influence on anion separations. The exchanger with two methylene groups between the charged functional groups showed the biggest difference as compared to the commercially available ZIC-HILIC and ZIC-pHILIC exchangers.     

Ion-exchange high-performance liquid chromatography of nucleotides and polypeptides on new types of ion-exchange sorbents, based on polystyrene-coated silicas.

A novel type of ion exchanger was prepared by multipoint covalent binding of polystyrene chains onto the surface of porous silica followed by polymer-analogous modification of the bonded layer. Both anion and cation exchangers were synthesized and examined in the separation of nucleotides and proteins. Rapid and efficient separation of basic polypeptides on strong anion exchangers and that of acidic polypeptides on strong cation exchangers could be achieved. For the separation of complete mixtures of polypeptides the application of zwitter-ionic ion exchangers can be recommended.     

Preparation and chromatographic performance of polymer-based anion exchangers for ion chromatography: A review

In the last decade the developments in the field of ion chromatography (IC) were aimed at increasing the efficiency, sensitivity and rapidity of analysis, as well as on improving separation selectivity. Since selectivity and efficiency to the large extent depend on the surface chemistry of the stationary phase, the development of novel anion exchangers remains one of the priority tasks in modern IC. The exact chemistry of commercially available resins is not known and not many literature data devoted to the procedures of preparing anion exchangers for IC have become available in the last 10–15 years. However, the knowledge about the surface chemistry of anion exchangers can provide understanding of the trends in selectivity and efficiency changes, as well as help with the choice of the stationary phase type suitable for solving a particular analytical task. The current review is devoted to the methods of preparing anion exchangers based on polystyrene-divinylbenzene (PS-DVB) and ethylvinylbenzene-divinylbenzene (EVB-DVB) for IC of inorganic and small organic anions and is aimed at demonstrating the improvement of their performance over the years, which was brought by the development of the new types of stationary phase architecture.     

单分散树脂基质的弱阳离子交换色谱固定相的制备及其在生物大分子分离中的应用研究

采用分散聚合法制备种子和“一步种子溶胀聚合法”制备了粒径为6~15 μm的单分散多孔氯甲基苯乙烯-二乙烯苯微球。该微球经化学改性后得到一种亲水性良好的新型高效弱阳离子交换色谱固定相。详细考察了该固定相的表面亲水性、对标准蛋白的分离性能和盐的种类对蛋白质保留行为的影响。考察结果表明该固定相是一种性能优异的弱阳离子交换色谱固定相。将其应用于鸡蛋清中溶菌酶的快速分离纯化,纯化后的溶菌酶纯度高于96%,比活高达71184 U/mg。     

基于季铵化烯丙基缩水甘油醚改性的阴离子交换固定相的制备北大核心CSCD

制备了一种季铵化烯丙基缩水甘油醚(allyl glycidyl ether,AGE)改性聚合物基质的阴离子固定相应用于离子色谱系统。它是利用AGE与水解的聚甲基丙烯酸缩水甘油酯-二乙烯基苯poly(glycidylmethacrylate-divinylbenzene,GMA-DVB)微球表面残留双键通过表面自由基共聚,再通过N,N-二甲基乙醇胺(一种叔胺)进行开环反应制备得到的。通过考察有机叔胺类型、微球水解、单体和引发剂用量、反应温度和时间对7种阴离子分离性能的影响,优化了制备条件。采用扫描电镜、元素分析对所得阴离子固定相进行了表征。结果表明,采用预先水解的GMA-DVB微球(水解过程中微球表面丰富的环氧基团转化为羟基)相对于直接采用GMA-DVB微球有助于降低固定相的交换容量和微球自身的非离子吸附作用;通过淋洗液浓度和目标离子保留因子的拟合结果证实了该固定相保留机理为典型的离子交换作用。使用碳酸根淋洗液,在优化的色谱条件下,该固定相可在13 min内实现常见7种无机阴离子的基线分离,并表现出较高的柱效(Cl-理论塔板数为49000块/m)。该色谱柱实用性通过分析自来水实际样品进行了验证。     

Ion Chromatography of Inorganic Anions on Graphitic Carbon as the Stationary Phase

Inorganic anions could be separated on porous graphitic carbon stationary phases in ion chromatography. Ion exchange between eluent anions and sample anions on the stationary phase was confirmed by the retention behavior and the possibility of indirect photometric detection. The elution order of anions was different from that observed for commercially available anion exchangers. Chloride, nitrate, and sulfate contained in tap water could be determined in 7 min.     

Separation of -amino acids using a series of zwitterionic sulfobetaine exchangers

A set of five new covalently bond sulfobetaine exchangers with inner quaternary amines and outer sulfonic acids have been prepared by attachment of a series of zwitterionic precursors to hyperporous divinylbenzene polymers using a grafting reaction. The series of zwitterionic exchangers have the same backbone and identical spacers to the polymeric backbone, as well as comparable capacities. The only difference is the chain length for one to five methylene groups between the charged functional groups. Chromatographic properties are examined by separation of α-amino acids using sodium acetate and nitric acid eluents. The separation mechanism is explored by varying eluent ionic strength and eluent pH, resulting in the conclusion that amino acids are separated due to cation exchange interactions. This is a behavior never before observed using zwitterionic exchangers. It contradicts the fact that sulfobetaine-type materials used in zwitterionic ion chromatography (ZIC) usually are well suited for anion separation and only poorly for cation separation. Contrary to anion separations using the identical set of exchangers, the materials with three and four methylene groups between the charges give the highest retention factors. Materials showing the high potential in ZIC separations of inorganic anions give low retention factors for amino acids and vice versa.     

Chromatographic behaviour of alkaloids on thin layers of cation exchangers. II. Alginic acid, Rexyn 102, Dowex 50-X4 and CMCNa.

The chromatographic behaviour of 48 alkaloids on cation exchangers with cellulose, paraffin and polystyrene matrices in both the acid and sodium salt forms has been investigated. Water-organic solvent mixtures, aqueous buffer solutions and organic and mineral acid solutions in both water and in aqueous-organic solvents have been used as eluents. The retention mechanisms of these compounds on alginic acid, Rexyn 102 (Hplus) and Dowex 50-X4 (Hplus) thin layers are discussed. Interesting separations of the alkaloids were carried out on alginic acid and Rexyn 102 (Hplus).     

Methods for Preparing High Performance Stationary Phases for Anion-Exchange Chromatography

The development of new high-performance anion-exchange stationary phases is one of the priority tasks of modern ion chromatography (IC). Most of the research in this field is aimed at improving the selectivity of anion exchangers and increasing the sensitivity, efficiency, and rapidity of the analysis. The selectivity of the stationary phases is largely determined by the chemistry of the adsorbent surface; therefore, it is particularly important to understand the relationship between the structure of the functional layer of the anion exchanger and its chromatographic properties. This review is devoted to methods for modifying polymer matrices in order to obtain highly efficient anion exchangers for the separation of inorganic and organic anions.     

Isolation of transplutonium elements on ion exchangers from solutions of high salt concentration

The behaviour of transplutonium elements (TPE) on cation and anion exchangers in aqueous alcoholic solutions of chlorides and nitrates of some alkali and alkaline earth metals as depending on different factors: salt concentration, content of alcohol and of acid in the solution as well as the nature of a cation has been studied. The data obtained were used to determine the optimal conditions of concentration of TPE on ion exchangers from solutions containing great quantities of salts. The advantages of the use of aqueous alcoholic solutions of nitric acid in the isolation of TPE from such solutions have been shown.     

Ermittlung des Vernetzungsgrades und Beladungszustandes von Ionenaustauschern auf Kunstharzbasis durch Pyrolyse-Gas-Chromatographie

A special introduction device with switching of carrier gas for improving the reproducibility of pyrolysate composition in pyrolysis gas-chromatography has been described. Its influence on the formation of pyrolysis products and on retention times has been studied on a model substance. The peak area ratios for determining the degree of cross-linking in ion exchangers on styrene-DVB basis can be estimated considerably more accurately with the help of carrier gas switching. Since anion exchangers yield lessα-methylstyrene on pyrolysis than do cation exchangers, their peak area ratios are appreciably larger. Increasing the degree of cross-linking lowers the ratios with the anion exchangers and raises them with the cation exchangers. At 400° C the thermal attack on anion exchangers with styrene-DVB matrix occurs mainly at the active group. The methyl esters or their decomposition products formed from the counter ions are characteristic pyrolysis products. A feature of Dowex 1 is the formation of trimethylamine; of Dowex 2, acetaldehyde. In this way, pyrolysis gas-chromatography enables information about the degree of cross linking and the nature of the anion of ion exchangers, as well as about the matrix, type and structure of the functional group and position of substitution of the anchor group in the matrix to be obtained.     

Evaluating the surface charge of C18 stationary phases

The surface charge of four C18 stationary phases was investigated by measuring the flow induced streaming potential, a well known electrokinetic property of charged surfaces. Three of the stationary phases (Symmetry, Gemini, and Xterra-MS) had significantly positive streaming potentials at both pH 3 and 4.5. The fourth (Zorbax-SB) appeared to be essentially neutral at pH 3 and became negative at pH 4.5. Apparent zeta potentials ranged from approximately +16 to -4 mV. The retention behavior was also investigated using chloride as model anion and glycinamide (in its protonated form) as model cation. When the retention factor (k) of glycinamide was subtracted from k of chloride anion, the resulting delta k values showed very similar trends as apparent zeta potential values, suggesting that the simple chromatographic method could be used to estimate zeta potential values, or that the zeta potential values could be useful for ranking columns according to ion exchange or exclusion behavior. The anion exchange capacity of the Symmetry and Gemini columns was also estimated, using a published chromatographic procedure, and the results suggest about 2 microEq. capacity per gram of packing.     

Chromatographic properties of zirconia-based stationary phases for ion exchange chromatography having surface bound cationic functions

A series of non-porous, microspherical zirconia-based stationary phases with surface bound cationic functions have been introduced and evaluated in ion exchange chromatography of proteins and small acidic solutes. Different surface modification procedures were evaluated in the covalent attachment of weak, strong or hybrid anion exchange moieties on the surface of non-porous zirconia micropar-ticles. N,N-Diethylaminoethanol (DEAE) was used as the weak anion exchange ligand while glycidyltrimethylammonium chloride, which was covalently attached to poly(vinyl alcohol) layer (PVAN) on the zirconia surface, constituted the strong anion exchange moiety. Partially quaternarized poly(ethyleneimine) hydroxyethylated (PEI) was used as the hybrid type of anion exchange coating. DEAE-zir-conia microparticles acted as purely cation exchange stationary phases toward basic proteins indicating the predominance of electron donor-electron acceptor interaction (EDA) with surface exposed zirconium sites as well as cation exchange mechanism via electrostatic interaction with unreacted and unshielded hydroxyl groups. PVAN-zirconia stationary phase exhibited anion exchange chromatographic properties toward acidic proteins, but EDA interaction has stayed as an important contributor to solute retention despite the presence of a relatively thick layer of poly(vinyl alcohol) on the surface of the zirconia particles. The modification of zirconia surface with partially quaternarized PEI proved to be the most effective approach to minimize Lewis acidic metallic properties of the support. In fact, PEI-zirconia stationary phase operated as an anion exchanger toward acidic proteins and other small acidic solutes.     

一种聚合型弱阳离子交换/亲水相互作用色谱固定相的制备及色谱性能

通过亲核取代反应将聚乙烯马来酸酐键合到氨基硅胶表面,然后将残余的马来酸酐水解,制备了一种弱阳离子交换/亲水相互作用高效液相色谱固定相(Sil-PolyCOOH),通过固体核磁、ζ-电势及元素分析对固定相进行了表征。选取核苷和核酸碱为模型化合物,通过考察流动相组成,离子强度和pH等因素对溶质保留的影响,探讨了固定相的分离性能和保留机理,结果表明,该固定相的保留机理同时涉及亲水分配相互作用和多重主客体作用力。该固定相还对糖类、敌草快与百草枯等化合物具有良好的分离性能。上述研究结果表明该固定相在极性化合物的分离上具有良好的应用前景。     

Porous silica particles grafted with an amphiphilic side‐chain polymer as a stationary phase in reversed‐phase high‐performance liquid chromatography

The amphiphilic polymer‐grafted silica was newly prepared as a stationary phase in high‐performance liquid chromatography. Poly(4‐vinylpyridine) with a trimethoxysilyl group at one end was grafted onto porous silica particles and the pyridyl side chains were quaternized with 1‐bromooctadecane. The obtained poly(octadecylpyridinium)‐grafted silica was characterized by elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy and Brunauer–Emmett–Teller analysis. The degree of quaternization of the pyridyl groups on the obtained stationary phase was estimated to be 70%. The selective retention behaviors of polycyclic aromatic hydrocarbons including some positional isomers were investigated using poly(octadecylpyridinium)‐grafted silica as an amphiphilic polymer stationary phase in high‐performance liquid chromatography and results were compared with commercially available polymeric octadecylated silica and phenyl‐bonded silica columns. The results indicate that the selectivity toward polycyclic aromatic hydrocarbons exhibited by the amphiphilic polymer stationary phase is higher than the corresponding selectivity exhibited by a conventional phenyl‐bonded silica column. However, compared with the polymeric octadecylated silica phase, the new stationary phase presents similar retention behavior for polycyclic aromatic hydrocarbons but different retention behavior particularly for positional isomers of disubstituted benzenes as the aggregation structure of amphiphilic polymers on the surface of silica substrate has been altered during mobile phase variation.     

Titania-based stationary phase in separation of ondansetron and its related compounds

Improvements in stationary phase stability have been and remain a great task for research of new stationary phases. Metal oxide-based stationary phases appear as one of perspective alternatives to classical silica based stationary phases regarding to their similar effectiveness, different selectivity, different retention mechanism and mainly better chemical and thermal stability. In this study, the retention behaviour of ondansetron and its five pharmacopoeial impurities on TiO(2)-based reversed phase was investigated. The influence of buffer type, pH and concentration on retention was studied. Different types and amount of organic solvent in mobile phase were tested. The effect of temperature and flow rate on separation was investigated. The separation conditions were optimized and developed method validated. The retention parameters - retention time (t(R)), retention factor (k'), theoretical plate number (N), resolution between peaks due to nearby peaks (R(s)) and symmetry factor (A(s)) have been compared to parameters achieved on polybutadiene-coated zirconia column. The thermodynamic parameters of retention of analysed compounds - enthalpy, entropy and Gibbs free energy - were calculated and compared to those achieved on polybutadiene-coated zirconia column. This work proves similarity of retention behaviour of ondansetron and its five related compounds on zirconia-based and titania-based stationary phases and potential utilisation of polyethylene covered TiO(2)-based reversed stationary phase as an alternative to polybutadiene-coated ZrO(2) stationary phase in pharmaceutical analysis of ondansetron.     

Synthesis and chromatographic properties of new polymer-based anion exchangers

New anion exchangers with the trimethylammonium functional group were prepared as a result of three-step synthesis involving the acylation of styrene-divinylbenzene copolymer with 25% cross-linking, the reductive amination of carbonyl groups, and subsequent methylation. Two methods of reductive amination were studied, and optimal conditions for this process were chosen. Chromatographic properties of the adsorbents were examined in a mode of ion chromatography with suppressed background conductivity and conductometric detection. The obtained anion exchangers demonstrated good selectivity, and the maximum efficiency was 30000 TP/m.     

Thermo-responsive polymer brush-grafted porous polystyrene beads for all-aqueous chromatography

Poly(N-isopropylacrylamide) (PIPAAm) brush-grafted porous polystyrene beads with variable grafted polymer densities were prepared using surface-initiated atom transfer radical polymerization (ATRP) for applications in thermo-responsive chromatography. Utilization of these grafted beads as a stationary phase in aqueous chromatographic analysis of insulin provides a graft density-dependent analyte retention behavior. The separations calibration curve on PIPAAm-grafted polystyrene was obtained using pullulan standards and exhibited inflection points attributed to analyte diffusion into bead pores and partitioning into grafted PIPAAm brush surfaces. Presence of these inflection points supports a separation mechanism where insulin penetrates pores in polystyrene beads and hydrophobically interacts with PIPAAm brushes grafted within the pores. Control of PIPAAm brush graft density on polystyrene facilitates effective aqueous phase separation of peptides based on thermally modulated hydrophobic interactions with grafted PIPAAm within stationary phase pores. These results indicated that PIPAAm brush-grafted porous polystyrene beads prepared by surface-initiated ATRP was effective stationary phase of thermo-responsive chromatography for aqueous phase peptide separations.