Role reversal in a supramolecular assembly: a chiral cyanine dye controls the helicity of a peptide-nucleic acid duplex

A new dicarbocyanine dye bearing branched, chiral N-alkyl substituents was synthesized and its ability to form helical aggregates on peptide nucleic acid (PNA) double-helical templates was studied. The dye aggregates less effectively than an analogous dye bearing linear, achiral substituents, presumably due to steric problems with packing the branched substituents compared with the linear substituents. When the PNA duplex has a left-handed helicity, addition of the achiral dye leads to formation of a left-handed dye aggregate. However, when the chiral dye aggregates in the presence of this duplex, a right-handed structure is formed, suggesting that the dye alters the helicity of the underlying template. When a racemic PNA duplex (i.e., equal amounts of right- and left-handed helices) is used, no chirality is observed for the dye aggregate formed by the achiral dye but a right-handed helical aggregate is once again formed by the chiral dye. These results indicate that chirality is transferred from the dye to the PNA, as opposed to other examples of polymer-templated dye aggregation where chirality is transferred from the template to the dye.     

Optical and surface morphological properties of polarizing films fabricated from a chromonic dye by the photoalignment technique

The inherent chromonic lyotropic liquid crystalline properties of a dye have been manipulated to fabricate multi-axial micropolarizing thin films by means of the photoalignment technique. The dye aqueous solution is deposited on a photopatterned polymer film to result in the macroscopic alignment of the dye molecules, followed by drying at ambient temperature. The solid polarizing dye layers thus produced exhibit very a high contrast ratio and degree of polarization in the region of visible light. Addition of a small amount of surfactant to the dye solution is a prerequisite for the generation of a nematic chromonic phase and for the formation of homogeneous thin dye layers on the polymer film. The correlation between the optical and surface morphological properties of the dye layers is discussed.     

Morphology and switching of holographic gratings containing an azo dye

The effects of an azo dye on the diffraction efficiency, morphology and electro-optic properties of the transmission mode of a holographic polymer dispersed liquid crystal (LC) have been studied. The azo dye induced an induction period which otherwise does not exist, followed by a gradual increase of the diffraction efficiency to a saturation value which increased with increasing azo dye content, as a result of the azo dye reorientating LC molecules within the droplet. The increased diffraction efficiency was caused by the decreased droplet coalescence which was due to the hindered migration of the LC by the dye molecules, and to LC orientation induced by azo dye molecules giving a high refractive index contrast. The droplet size decreased with increasing dye content. The dye also lowered the threshold voltage due to the high dielectric anisotropy caused by the presence of a strong on-axis dipole moment and decreased the response time.     

Kinetic studies of photoelectrocatalytic degradation of Ponceau 6R dye with ammonium persulfate

Kinetic degradation of Ponceau 6R dye using oxidation with ammonium persulfate (APS) as oxidant, and catalyzed by electro, photo, and photo-electro at pH 1.0 was investigated. Ammonium persulfate (APS) proved to be a better oxidant of dye with photoelectrocatalytic degradation (PECD). The influence of various pH of the solution on the efficiency of degradation of dye was investigated. The results were observed that the dye decolorization was enhanced using PECD at pH 2.0. The rate of degradation of dye with APS followed pseudo-first order kinetics in the dye concentration. Also, it can be seen that increasing the concentration of oxidant (APS) led to a higher rate of dye decolorization.     

Sensitizers for Aqueous‐Based Solar Cells

Aqueous dye‐sensitized solar cells (DSSCs) are attractive due to their sustainability, the use of water as a safe solvent for the redox mediators, and their possible applications in photoelectrochemical water splitting. However, the higher tendency of dye leaching by water and the lower wettability of dye molecules are two major obstacles that need to be tackled for future applications of aqueous DSSCs. Sensitizers designed for aqueous DSSCs are discussed based on their functions, such as modification of the molecular skeleton and the anchoring group for better stability against dye leaching by water, and the incorporation of hydrophilic entities into the dye molecule or the addition of a surfactant to the system to increase the wettability of the dye for more facile dye regeneration. Surface treatment of the photoanode to deter dye leaching or improve the wettability of the dye molecule is also discussed. Redox mediators designed for aqueous DSSCs are also discussed. The review also includes quantum‐dot‐sensitized solar cells, with a focus on improvements in QD loading and suppression of interfacial charge recombination at the photoanode.     

Study of dye–surfactant interaction: Aggregation and dissolution of yellowish in N-dodecyl pyridinum chloride

Among several known technique for investigating dye–surfactant interactions, the conductivity measurement and spectroscopy are simple and accessible methods for determining the degree of interaction between dye and surfactant. An abrupt change in measured specific conductance of dye–surfactant mixture is attributed to the formation of dye–surfactant ion pair at six different temperatures. Thermodynamic parameters were also evaluated. The results have shown that low temperature favors the tendency for ion pair formation, as the equilibrium constant decreases with increase in temperature. To enhance the scope of the present study, a gradual transition in absorbance from pre-miceller to post-miceller region of surfactant were monitored. Spectral behavior of dye–surfactant mixture with varying concentration of surfactant confirms that electrostatic interaction between dye and surfactant occurs up to a certain level. Beyond this concentration only the dissolution of dye–surfactant aggregate was observed. The association tendency of opposite charged surfactant is used to recover dye from dye–surfactant mixture.     

染料在纳米TiO2薄膜表面吸附性能的研究

采用溶胶－凝胶法制备纳米TiO2薄膜，并通过吸附染料形成染料／TiO2复合薄膜。分析了染料与TiO2薄膜的相互关系，利用紫外可见、比表面等技术研究染料在纳米TiO2薄膜表面的吸附性能，并计算出TiO2薄膜对染料的最大吸附率。研究表明，染料溶液浓度、温度以及TiO2薄膜浸泡时间对染料吸附量有着显著的影响，染料的吸附性能直接影响着太阳能电池的光电转换效率。     

Photophysics of representative ketocyanine dyes: dependence on molecular structure

Spectral properties of a new fluorescent ketocyanine dye have been discussed. The energy of maximum absorption/fluorescence of the dye exhibits bathochromic shift with increasing polarity of the medium. Both dipolarity-polarisability and hydrogen bond donation interaction contribute to solvation of the dye. Study of fluorescence parameters points to existence of different emitting states of the dye for aprotic and protic solvents. While the emitting state is the (1)(π, π*) state for aprotic solvents, fluorescence supposedly take place from a different emitting state involving H-bond formation in the excited state in protic solvents. Fluorescence parameters of the dye have been compared with those for a structurally similar symmetric ketocyanine dye. The faster decay of the dye relative to its symmetric counterpart has been explained as due to an increase of nonradiative decay.     

RADICAL INTERMEDIATES IN THE FLUORESCEIN-AND EOSIN-PHOTOSENSITIZED AUTOXIDATION OF l-TYROSINE*

Abstract The Primary reactions of the cosin-and fluorescein-photosensitized autoxidation of L-tyrosine were studied in aqueous media (pH = 8.6) by the flash-photolysis technique. The dye molecules were quantitatively converted to their triplet states in a single flash. The triplet dye molecules were found to react with tyrosine or oxygen. Ground state or radical dye molecules were formed in these reactions. Some 40 per cent of the triplet-tyrosine reactions yielded radicals, in triplet dye-oxygen reactions the corresponding yield was less than 10 per cent. The ground state dye was regenerated from the semireduced dye in reactions with oxygen and from the semioxidized dye in reactions with tyrosine. In the absence of oxygen the radicals formed in the photoinduced electron-transfer between the triplet dye and tyrosine recombined to a large extent.     

Synthesis and evaluation as a visible‐light polymerization photoinitiator of a new dye‐linked bis(trichloromethyl)‐1,3,5‐triazine

A dye‐linked initiator consisting of a merocyanine dye, which has an absorption maximum at 460 nm, and a substituted bis(trichloromethyl)‐1,3,5‐triazine initiator was prepared in order to achieve an efficient photopolymerization in a visible‐light region. The spectroscopic studies clearly showed that the dye‐linked initiator exhibit a marked increase in the efficiency of fluorescence quenching than a simple mixture of the dye/initiator. These results are reasonably explained in terms of the efficiency of electron transfer between the dye and the initiator. The relative photoinitiating efficiency of dye‐linked initiators in photopolymerization of acrylate monomers was evaluated and the results clearly indicated that the dye‐linked photoinitiator exhibited a marked increase in the photoinitiating efficiency of photopolymerization of acrylates compared to a simple mixture of the dye/initiator in photopolymer coatings particularly at a lower concentration of the initiator. This was explained in terms of the active quenching sphere of the dye/initiator system. Superior photosensitivity in the linked compound at a lower concentration indicates that this would be particularly useful as a visible‐light photoinitiator in holographic‐recording photopolymers. Copyright © 2004 John Wiley & Sons, Ltd.     

Dendritic molecular capsules for hydrophobic compounds

Reichardt's dye, a highly solvatochromic dye, was encapsulated within poly (glycerol succinic acid) ([Gn]-PGLSA-OH) dendrimers to investigate the interior environment of these dendritic macromolecules. The absorption maximum for the encapsulated Reichardt's dye in water was indicative of a relatively high dielectric constant present within the dye/dendrimer complex. (1)H NMR of the encapsulated complex showed the presence of aromatic protons from Reichardt's dye along with the aliphatic protons of the dendrimer. Additionally, there were substantial changes in T(1) and T(2) times of the encapsulated dye when compared with the free dye, and (1)H NOESY spectra for the complex showed a significant number of intermolecular NOE cross-peaks. These data reveal the close through-space proximity of the dye to the dendrimer and the restricted motion of the encapsulated dye. To demonstrate the potential use of these macromolecules as drug delivery vehicles, the poorly water-soluble anticancer drug 10-hydroxycamptothecin (10HCPT) was encapsulated within a carboxylated PGLSA dendrimer ([G4]-PGLSA-COONa). Cytotoxicity assays with human breast cancer cells showed a significant reduction of cell viability, demonstrating that 10HCPT retains activity upon encapsulation.     

染料云的形态结构表征—染料的径向分布与投影密度分布

彩色影像的最小像元-染料云的形态结构的表征有两种方法:一种是染料云的染料浓度的径向分布;另一种是染料云的投影密度分布。前者一般是从染料云形成过程的模拟计算得到;后者是从微密度计对染料云的扫描测得。本文提出了将染料的径向分布转换成相对投影密度的一种近似计算方法,从而使两种形式的表征方法相互联系起来,这为进一步优化染料云形态的研究打下基础。     

A New method of determining the extent of binding of an ionic dye to a polyelectrolyte in solution

A method of determining the free dye concentration in a dye/polyelectrolyte solution is described. The method utilizes the tendency of cationic dyes to adsorb to a cellulose dialysis membrane, and the nature of the membrane binding is studied by spectrophotometric methods. The binding of the cationic dye toluidine blue to the polyanion sodium carboxymethylcellulose in solution is used as an example. The proposed technique gives reliable estimates of free dye concentration over a wide range of polyanion and dye concentrations, both in the presence and absence of added simple electrolyte. The method possesses inherent advantages over estimates of free dye concentration obtained by absorption spectrophotometry and is more versatile than fluorimetry.     

Determination of dye intermediates in oxidative hair dyes by fused-silica capillary gas chromatography

A fused-silica capillary gas chromatographic method is described for the determination of dye intermediates in oxidative hair dyes. An appropriate amount of hair dye sample is dissolved in 10 ml of methanol containing 0.25 g of ammonium thioglycolate and an appropriate amount of 2-amino-4-methylphenol as an internal standard. This solution is directly injected into a gas chromatograph. A fused-silica capillary column with cross-linked methyl silicone OV-1 or SE-54 as a liquid phase yields excellent resolution of dye intermediates. Some factors affecting the quantitation of dye intermediates are discussed. The proposed method gave good recoveries and reproducibilities, and permits simultaneous determination of various types of dye intermediates without any pretreatment. The use of a nitrogen-phosphorus detector allows the selective detection of nitrogen-containing dye intermediates. This simple and versatile method is applicable for the determination of dye intermediates in commercial hair dyes.     

Study of the noncovalent interaction of squarylium dyes with serum albumins

The noncovalent interaction of zwitterionic indolium squarylium dyes (hydrophilic and hydrophobic) and a structurally analogous ionic indodicarbocyanine (hydrophilic) dye with serum albumins was studied by spectral and fluorescent methods. It has been found that the hydrophilic squarylium dye with sulfonate groups most efficiently interacts with albumins, which is probably due to the double negative charge of the dye molecule at the expense of the sulfonate groups and the possibility to form hydrogen bonds with albumin. The hydrophobic squarylium dye, as well as the hydrophilic indodicarbocyanine dye without the squarylium fragment in its structure, bind with albumins much weaker than the structurally relevant hydro- philic squarylium dye. The properties of the latter dye permit us to recommend it for using as a spectral and fluorescent probe for serum albumins in extracellular media of living organisms.     

Comparative studies on biophysical interactions between 4-dicyanomethylene-2,6-dimethyl-4H-pyran (DDP) with bovine serum albumin (BSA) and human serum albumin (HSA) via photophysical approaches and molecular docking techniques

Photophysical studies of 4-Dicyanomethylene-2,6-Dimethyl-4H-Pyran (DDP) dye with globular proteins, Human Serum Albumin (HSA) and Bovine Serum Albumin (BSA) were carried out in aqueous solution. An isosbestic point resulted on the addition of serum albumins, which signifies a complex or an equilibrium state of DDP dye with albumin. Addition of BSA to DDP dye results in a fluorescence enhancement accompanied with a significant hypsochromic shift, whereas with that of HSA, a fluorescence quenching with a considerable blue shift resulted. Excited state studies of DDP dye with serum albumins portray that the role of binding sites of dye with albumins vary considerably and the nature of interaction is presumably attributed to combined hydrogen-bonding and hydrophobic interactions. Molecular docking studies of DDP dye with albumins and two other derivatives 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) dye and 4-(Dicyanomethylene)-2-methyl-6-(4-t-buyl)-4H-pyran (DCT) dyes with BSA and HSA elucidates that the hydrogen-bonding interaction accompanied with several hydrophobic, pi–pi an pi–alkyl interactions coexist between dye and albumins. The binding energy, intermolecular energy and stability of the DDP, DCM and DCT dyes through docking techniques with albumins authenticate that the dye predominantly acts as hydrogen-bonding acceptor site and the protein molecule as the donor. DDP dye prefers to exist in four different binding sites of HSA, whereas, in the case of BSA, the most preferred site is found to be hydrophobic domain (site I). Interestingly, the most preferred site of DCT dye is III A subdomain of HSA, whereas DCM dye is oriented towards I B subdomain. DDP and DCT are smaller in size and reside in the domain preferred for smaller ligands (II A and IIIA) as resulted in several drugs-HSA interaction whereas DCM dye which is categorized as medium to larger ligand based on the extended structure resides in the most favoured site IB. Fluorescence techniques in combination with molecular docking methods elucidate binding characteristics and the domain in which the dye resides in a micro heterogeneous environment is established in this study.     

Influence of Dye Content on the Conduction Band Edge of Titania in the Steam‐treated Dye‐dispersing Titania Electrodes

The titania and dye‐dispersing titania electrodes were prepared by a nitric acid‐catalyzed sol‐gel process. The dye‐dispersing titania contains the dye molecules dispersed on the surface of the individual nanosized titania particles. The photo‐cyclic voltammetry (Photo‐CV) and photoelectric measurements of the dye‐dispersing titania electrodes were conducted to clarify the factors changing the conduction band edge of the titania and the open‐circuit voltage (V_oc) of the electrodes. The remaining nitrate ions caused a negative shift of conduction band edge of the titania of the dye‐dispersing titania. The conduction band edge of the titania was shifted in a negative direction in the electrode containing a greater amount of the dye. These results are due to the adsorption of nitrate ions and the dye‐titania complex formation on the titania particle surface. The effect of the dye‐titania complex formation on the shift in the titania conduction band edge was greater than that of the adsorption of nitrate ions due to strong interaction between the dye and titania through the carboxylate and quinone‐like groups of the dye. The shift in the titania conduction band edge corresponded to the change in the V_oc value.     

Studies on the Interaction of Surfactants with Cationic Dye by Absorption Spectroscopy

The interaction of methyl violet, a cationic dye, with various surfactants, viz. anionic (SDS), nonionic (Triton X-100), and cationic (CTAB), has been investigated spectrophotometrically in submicellar and micellar concentration range. While in the submicellar concentration region of SDS the higher aggregates of the dye are found, in the micellar concentration region the monomer of the dye predominates. With nonionic surfactant the dye is solubilized primarily as the monomer. CTAB produces no perturbation to the visible spectra of the dye. In the presence of strong electrolytes such as NaNO(3) and NaCl the dye aggregates are formed at a much lower SDS concentrations. Copyright 2000 Academic Press.     

Spectral characteristics and nonlinear studies of crystal violet dye

Solid-state dye-doped polymer is an attractive alternative to the conventional liquid dye solution. In this paper, the spectral characteristics and the nonlinear optical properties of the dye crystal violet are studied. The spectral characteristics of crystal violet dye doped poly(methylmethacrylate) modified with additive n-butyl acetate (nBA) are studied by recording its absorption and fluorescence spectra and the results are compared with the corresponding liquid mixture. The nonlinear refractive index of the dye in nBA and dye doped polymer film were measured using z-scan technique, by exciting with He-Ne laser. The results obtained are intercompared. Both the samples of dye crystal violet show a negative nonlinear refractive index. The origin of optical nonlinearity in the dye may be attributed due to laser-heating induced nonlinear effect.     

Concentration-dependent energy transfer studies in ternary dye mixture of Stilbene-420, Coumarin-540 and Nile Blue

The energy transfer studies in the case of ternary dye mixture [Stilbene-420 (donor)+Coumarin-540 (intermediator)+Nile Blue (acceptor)] have been done and discussed through optical gain characteristics at various acceptor concentrations under nitrogen laser excitation. The concentration of the other two dyes were kept constant. It is observed that the concentration of the acceptor dye plays a very critical role in energy transfer dye laser (ETDL) as small change in its concentration varies the intensity of the laser output in the red region by large amount. Also, the highest laser output in the red region is obtained when the concentration of the acceptor dye is slightly higher than that of the intermediator dye. The present studies are helpful in deciding the optimum concentration of the acceptor dye to be used in ternary dye mixture for maximum gain and tuning range. The ternary dye mixture under study provides an ETDL tuning range up to 700 nm.