Photochemical reactions of metal carbonyls [M(CO)6 (M = Cr,Mo and W), Re(CO)5Br,Mn(CO)3Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh)

Five new complexes, [M(CO)₅(apmsh)] [M = Cr; (1), Mo; (2), W; (3)], [Re(CO)₄Br(apmsh)] (4) and [Mn(CO)₃(apmsh)] (5) have been synthesized by the photochemical reaction of metal carbonyls [M(CO)₆] (M = Cr, Mo and W), [Re(CO)₅Br], and [Mn(CO)₃Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh). The complexes have been characterized by elemental analysis, mass spectrometry, f.t.-i.r. and ¹H spectroscopy. Spectroscopic studies show that apmsh behaves as a monodentate ligand coordinating via the imine N donor atom in [M(CO)₅(apmsh)] (1–4) and as a tridentate ligand in (5).     

紫外激光诱导C60与M(CO)6(M=Cr,Mo, W)的配位反应

研究了用紫外激光(355 nm)诱导C_(60)与金属羰基化合物M(CO)_6(M＝Cr；Mo，W)的配位反应，合成了具有C_(4υ)对称性的配位络合物(η~2－C_(60))M(CO)_5，并初步讨论了C_(60)与M(CO)_6反应的动力学过程．     

金属羰基化合物M(CO)6(M=Cr,Mo, W)氧原子转移反应动力学与机理

本文研究了PPh3存在与不存在的情况下, M(CO)6(M=Cr, Mo, W)与三甲胺氧化物me3NO在CH2Cl2中的氧原子转移反应动力学. 反应速率遵循: r=k[M(CO)6][Me3NO], 并且rW>rMo>rCr, 并根据实验结果提出了反应机理, 讨论了溶剂对反应速率的影响.     

Interesting synthetic routes from the reinvestigation of the reaction of the M(CO)6 (M=Cr,Mo and W) species with KOH

Summary Reinvestigation of the reaction of M(CO)₆ (M=Cr, Mo or W) with KOH has been found to provide a very convenient route to the K[M₂H(CO)₁₀] compounds (M=Cr, Mo or W). The reaction involving Cr(CO)₆ yields new potassium derivatives containing [Cr₂(CO)₁₀]^2– and [HCr(CO)₅]^– species; also K[Cr₂D(CO)₁₀] is produced from the Cr(CO)₆/KOD interaction in C₂D₅OD. The reaction involving two different group 6 metal carbonyls yields [MM(CO)₁₀(-H)]^– (MM=CrMo, CrW or WMo) species as their K⁺ and PPN⁺ [bis(triphenylphosphine)iminium] salts.     

Cumulated double bond systems as ligands : V. Dialkylsulfurdiimine compounds M(CO)4(RNSNR) (M = Cr,Mo, W) and M(CO)5(RNSNR) (M = Cr,W); structural,spectroscopic and fluxional properties.

The preparation and properties are reported of M(CO)₄(RNSNR) (M = Cr, Mo, W; R = i-Pr, t-Bu), in which the ligand is bidentate and in the trans,trans configuration, and of M(CO)₅(RNSNR) (M = CR, W; R = Et, i-Pr) in which the sulfurdiimine is monodentate and in the cis,trans configuration. In both cases the ligand is linked to the metal atom via the N-atom(s). With M(CO)₅(MeNSNMe) a second isomer is found in which the sulfurdiimine is probably bonded via the S-atom to the metal. All the pentacarbonyl compounds are fluxional; this is attributed to a gliding movement of the metal atom along the NSN system.Both W(CO)₄(t-BuNSN-tBu) and W(CO)₅(MeNSNMe) show vibronic coupling of metal to ligand charge transfer transitions with sulfurdiimine vibrations, as shown with Resonance Raman, but only for W(CO)₅(MeNSNMe) also with the symmetric mode of the equatorial carbonyl groups. The metalsulfurdiimine bond appears to be weak for M(CO)₅(RNSNR), but strong for M(CO)₄(RNSNR).     

Synthesis of the New Silanediyldiphosphinite tBu2Si(OPPh2)2 and its Reactions with the Norbornadiene Complexes C7H8M(CO)4 (M = Cr,Mo, W). Crystal Structures of cis-M(CO)4[tBu2Si(OPPh2)2] (M = Cr,Mo)

Silanediyldiphosphinite tBu₂Si(OPPh₂)₂ 1 has been synthesised. 1 reacts with the norbornadiene complexes C₇H₈M(CO)₄ (M = Cr, Mo, W) to give six-membered chelate rings of the type cis-M(CO)₄[tBu₂Si(OPPh₂)₂] 2–4 . The crystal structures of the chromium and molybdenum complexes cis-Cr(CO)₄[tBu₂Si(OPPh₂)₂] 2 and cis-Mo(CO)₄[tBu₂Si(OPPh₂)₂] 3 have been determined. Both complexes crystallise in the triclinic system (space group P1 ) with unit cell parameters: ( 2 ) a = 1 093(3) pm, b = 1 477(5) pm and c = 1 542(5) pm; α = 108.4(2)°, b? = 103.87(11)° and b? = 104.57(10)°; U = 2.143(12) nm³; Z = 2; ( 3 ) a = 1 097.8(2) pm, b = 1 483.7(2) pm and c = 1 554.3(2) pm; α = 108.10(1)°, b? = 103.956(6)° and γ = 104.213(7)°; U = 2.1899(6) nm³; Z = 2. Both 2 and 3 consist of discrete, slightly distorted, octahedral monomers in which the six-membered chelate rings are essentially planar. In contrast, the conformations of the chelate rings found in crystal structures of analogous complexes vary from twist-boat to “chaise longue”.     

Photochemical studies of M(CO)6 (M = Cr,Mo, W) at low temperature in solution. Infrared spectra of M(CO)5 (solvent) (solvent = methylcyclohexane,methylene chloride) and W(CO)5L (L = aromatic hydrocarbon)

The infrared spectra of M(CO)₅(MCH) (MCH = methylcyclohexane; M = Cr, Mo, W), formed by 366 nm irradiation of M(CO)₆ at ?78°C in rigorously purified methylcyclohexane, are reported. The previously reported spectrum of “W(CO)₅” at low temperature in methylcyclohexane/isopentane solution is attributed to W(CO)₅(impurity), where the impurity is probably an aromatic or olefinic hydrocarbon. Spectra in methylene chloride solution are also discussed. The photochemical reactions of W(CO)₆ with aromatic hydrocarbon ligands in methylcyclohexane solution were also studied at ?78°C in a low temperature infrared cell. Irradiation (366 nm) of W(CO)₆ at ?78°C in rigorously purified methylcyclohexane solution containing approximately 5% (v/v) toluene, benzene, mesitylene, biphenyl, or p-xylene initially produces the complex W(CO)_5? (MCH). In the presence of the aromatic hydrocarbon, this complex is unstable and it decomposes in a dark reaction to give a complex which has an infrared spectrum typical for a C_4v M(CO)₅X molecule. It is proposed that the product of the dark reaction is W(CO)₅(aromatic), formed by reaction of W(CO)₅(MCH) with the aromatic ligand in solution. The infrared spectra of the W(CO)_5? (aromatic) complexes are different from the spectra previously reported for these complexes. It is shown that the spectra previously reported for W(CO)_5? (aromatic) are actually attributable to W(CO)₅(hexane) (hexane was the solvent used in the previous study); these spectra were probably obtained before W(CO)₅(hexane) had time to react with the aromatic hydrocarbon.     

Reactivity of the inversely polarized phosphaalkenes RP=C(NMe2)2 (R = tBu, Me3Si, H) towards arylcarbene complexes [(CO)5M=C(oEt)Ar] (Ar= Ph, M = Cr, W; Ar = 2-MeC6H4, 2-MeOC6H4, M = W)

The reaction of the arylated Fischer carbene complexes [(CO)5M=C(OEt)Ar] (Ar=Ph; M = Cr, W; 2-MeC6H4; 2-MeOC6H; M = W) with the phosphaalkenes RP=C(NMe2), (R=tBu, SiMe3) afforded the novel phosphaalkene complexes [[RP=C(OEt)Ar]M(CO)5] in addition to the compounds [(RP=C(NMe2)2]M(CO)5]. Only in the case of the R = SiMe3 (E/Z) mixtures of the metathesis products were obtained. The bis(dimethylamino)methylene unit of the phosphaalkene precursor was incorporated in olefins of the type (Me2N)2C=C(OEt)(Ar). Treatment of [(CO)5W=C(OEt)(2-MeOC6H4)] with HP=C(NMe2)2 gave rise to the formation of an E/Z mixture of [[(Me2N)2CH-P=C(OEt)(2-MeOC6H4)]W(CO)5] the organophosphorus ligand of which formally results from a combination of the carbene ligand and the phosphanediyl [P-CH(NMe2)2]. The reactions reported here strongly depend on an inverse distribution of alpha-electron density in the phosphaalkene precursors (Pdelta Cdelta+), which renders these molecules powerfu] nucleophiles.     

Photochemical reactions of Re(CO)5Br with Ph2P(CH2) n PPh2 (n = 1, dppm; 2, dppe; 3, dppp)

The new complexes fac-[Re(CO)₃Br{Ph₂P(CH₂) _n PPh₂}] (1a–3a) [(1a), n = 1; (2a), n = 2; (3a), n = 3] and [Re₂(CO)₈Br₂{-Ph₂P(CH₂) _n PPh₂}] (1b–3b) [(1b), n = 1; (2b), n = 2; (3b), n = 3] have been prepared by the photochemical reaction of Re(CO)₅Br with Ph₂P(CH₂) _n PPh₂ (n = 1, dppm; 2, dppe; 3, dppp). The complexes have been characterized by elemental analysis, mass spectroscopy, f.t.-i.r. and ³¹P-[¹H]-n.m.r. spectrometry. The spectroscopic studies suggest cis-chelate bidentate coordination of the ligand in fac-[Re(CO)₃Br{Ph₂P(CH₂) _n PPh₂}] (1a–3a) and cis-bridging bidentate coordination of the ligand between two metals in [Re₂(CO)₈Br₂{cis--Ph₂P(CH₂) _n PPh₂}] (1a–3a).     

Metallkomplexe von Phenylenbistriazeniden: Synthese und Kristallstrukturen von [Cp(CO)2M]2(1,2-PhN3C6H4N3Ph) (M = Mo,W)

Metal Complexes of Phenylenebistriazenides: Synthesis and Crystal Structures of [Cp(CO)₂M]₂(1,2-PhN₃C₆H₄N₃Ph) (M = Mo, W) [Cp(CO)₂M]₂(1,2-PhN₃C₆H₄N₃Ph) [(M = Mo( 1 ), M = W( 2 )] is formed in the reaction of Cp(CO)₃MCl with PhN₃(H)C₆H₄N₃(H)Ph and C₂H₅ONa in a THF/ethanol mixture. 1 crystallizes from toluene as dark red crystals (triclinic, P1 , a = 1 499.3(9) pm, b = 1 734.0(7) pm, c = 1 852.8(8) pm, α = 66.84(3)°, β = 78.25(4)°, γ = 77.19(4)°). The unit cell contains four complexes with two independent complexes in the asymmetric unit, and eight solvent molecules. 2 crystallizes from THF as yellow crystals free from solvent molecules (triclinic, P1 , a = 979.0(5) pm, b = 1 152.8(5) pm, c = 1 475.8(5) pm, α = 98.26(4)°, β = 104.93(4)°, γ = 101.03(4)°, Z = 2). 1 and 2 are discrete molecular complexes with a 1,2-bis(phenyltriazenido)phenylligand, (PhN₃C₆H₄N₃Ph)^2?, chelating the metal atoms of two Cp(CO)₂M units with the N atoms N1 and N3 of both N₃ groups. Due to the sterical pretension of the Cp(CO)₂M units the phenylenebistriazenido ligand deviates strongly from planarity that is found in the metal complexes characterized so far.     

Relative efficiencies of CpM(CO)(n)CH(3) and CpM(CO)(n)Ph (M = Cr,Mo, W,and Fe) complexes in photoinduced DNA cleavage

The relative efficiencies of photoinduced DNA cleavage by complexes of the type CpM(CO)(n)()R (M = Cr, Mo, or W, n = 3, R = CH(3) or Ph; M = Fe, n = 2, R = CH(3) or C(6)H(5)) have been investigated using a plasmid relaxation assay. Only the tungsten and iron complexes reproducibly caused single strand scission, in addition to which the iron systems efficiently gave double strand cleavage. The iron complexes gave strand scission at lower concentrations than the corresponding tungsten systems, with the phenyl complexes producing more damage than the methyl systems.     

M-P versus M=M bonds as protonation sites in the organophosphide-bridged complexes [M2Cp2(mu-PR2)(mu-PR'2)(CO)2], (M = Mo, W; R, R' = Ph, Et, Cy)

The unsaturated complexes [W2Cp2(mu-PR2)(mu-PR'2)(CO)2] (Cp = eta5-C5H5; R = R' = Ph, Et; R = Et, R' = Ph) react with HBF4.OEt2 at 243 K in dichloromethane solution to give the corresponding complexes [W2Cp2(H)(mu-PR2)(mu-PR'2)(CO)2]BF4, which contain a terminal hydride ligand. The latter rearrange at room temperature to give [W2Cp2(mu-H)(mu-PR2)(mu-PR'2)(CO)2]BF4, which display a bridging hydride and carbonyl ligands arranged parallel to each other (W-W = 2.7589(8) A when R = R' = Ph). This explains why the removal of a proton from the latter gives first the unstable isomer cis-[W2Cp2(mu-PPh2)2(CO)2]. The molybdenum complex [Mo2Cp2(mu-PPh2)2(CO)2] behaves similarly, and thus the thermally unstable new complexes [Mo2Cp2(H)(mu-PPh2)2(CO)2]BF4 and cis-[Mo2Cp2(mu-PPh2)2(CO)2] could be characterized. In contrast, related dimolybdenum complexes having electron-rich phosphide ligands behave differently. Thus, the complexes [Mo2Cp2(mu-PR2)2(CO)2] (R = Cy, Et) react with HBF4.OEt2 to give first the agostic type phosphine-bridged complexes [Mo2Cp2(mu-PR2)(mu-kappa2-HPR2)(CO)2]BF4 (Mo-Mo = 2.748(4) A for R = Cy). These complexes experience intramolecular exchange of the agostic H atom between the two inequivalent P positions and at room-temperature reach a proton-catalyzed equilibrium with their hydride-bridged tautomers [ratio agostic/hydride = 10 (R = Cy), 30 (R = Et)]. The mixed-phosphide complex [Mo2Cp2(mu-PCy2)(mu-PPh2)(CO)2] behaves similarly, except that protonation now occurs specifically at the dicyclohexylphosphide ligand [ratio agostic/hydride = 0.5]. The reaction of the agostic complex [Mo2Cp2(mu-PCy2)(mu-kappa2-HPCy2)(CO)2]BF4 with CN(t)Bu gave mono- or disubstituted hydride derivatives [Mo2Cp2(mu-H)(mu-PCy2)2(CO)2-x(CNtBu)x]BF4 (Mo-Mo = 2.7901(7) A for x = 1). The photochemical removal of a CO ligand from the agostic complex also gives a hydride derivative, the triply bonded complex [Mo2Cp2(H)(mu-PCy2)2(CO)]BF4 (Mo-Mo = 2.537(2) A). Protonation of [Mo2Cp2(mu-PCy2)2(mu-CO)] gives the hydroxycarbyne derivative [Mo2Cp2(mu-COH)(mu-PCy2)2]BF4, which does not transform into its hydride isomer.     

A new method of preparation of the anionic decacarbonyls M2(CO)102− (M = Cr,Mo, W) and syntheses and properties of Mg(THF)2[M2(CO)10]

The anionic decacarbonyIs M₂(CO)₁₀^2? were synthesized via reduction reactions of CrCl₃, MoCl₅ and WCl₆ with metallic magnesium or sodium amalgam under carbon monoxide. Chemical properties and IR characteristics of the magnesium salt Mg(THF)₂[M₂(CO)₁₀] are desribed.     

SiO2负载的Pt-M(M=Cr,Mo,W)配合物双功能催化剂

过渡金属异双核金属有机化合物的研究是一个活跃的领域,人们期望从中制取对极性小分子(如CO,CO2等)具有双功能活化的催化剂.周期表前区过渡金属或稀土元素(如Ti,Zr,Mo,La,Ce等)作为添加组分可明显地增加SiO2负载的铑催化剂催化CO氢化反应的活性和含氧化合物的选择性[1].虽然一些异双核金属氢基羰基化合物已被合成和表征[2],但是关于SiO2负载的异双核金属配合物催化剂的研究还未见文献报道.我们合成、表征了(PPh3)HPt(μ-PPh2)(μ-CO)M(CO)4(M=Cr,Mo,W)异双核配合物[3](I).本文研究了SiO2负载的该配合物催化剂对CO氢化反应和对丙烯氢甲酰化反应的两种催化功能.     

Benchmark calculations on the electron detachment energies of MO3* and M2O6* (M = Cr, Mo, W)

Neutral and anionic molecules of the monomers and dimers of the group VIB transition metal oxides (MO3 and M2O6) were studied with density functional theory (DFT) and coupled cluster CCSD(T) theory. Franck-Condon simulations of the photoelectron spectra were carried out for the transition from the ground state of the anion to that of the neutral molecule. Molecular structures from the DFT and CCSD(T) methods are compared. Electron detachment energies reported in the literature were evaluated. The calculated adiabatic and vertical electron detachment energies (ADEs and VDEs) were compared with the experimental results. CCSD(T) gives results within 0.12 eV for the ADEs. CCSD(T) predicts VDEs that are in error by as much as 0.3 eV for M = Cr. DFT hybrid functionals were found to give poor results for the ADEs and VDEs for M = Cr due to the substantial amount of multireference character in the wavefunction, whereas the pure DFT functionals give superior results. For M = Mo and W, excellent agreement was found for both CCSD(T) and many DFT fucntionals. The BP86 functional yields the best overall results for the VDEs of all the metal oxide clusters considered. Heats of formation calculated at the CCSD(T) level extrapolated to the complete basis set limit are also in good agreement with available experimental data.