电聚高分子膜固定化酶生物传感器及其进展

本文将电化学聚合高分子膜固定膜酶制备的生物传感器分为以下三种主要类型，并分别 就其发展概况和发展方向进行了评述。即：以溶解氧为电子受体的的生物传感器（第一代电流型生物传感器）；以非氧介全为电子受体的生物传感器（第二代电流型生物传感器）和电子在酶和聚合高分膜之间直接进行转移的传感器（第三代电流型生物传感器）。     

咔唑基四苯乙烯多功能发光材料的合成与性能

设计合成了一个以四苯乙烯为核心,四端连接长烷基链的咔唑基四苯乙烯衍生物(TPECz),该化合物具有典型的聚集诱导发光(AIE)特性.紫外光谱(UV-Vis)、荧光光谱(PL)、热重(TG)和示差扫描量热(DSC)研究表明,该化合物属于深蓝光材料、具有较好的热稳定性,并且对金属Fe3+具有很好的识别作用,有望用于金属离子检测;同时,该化合物外围的咔唑基团具有电化学活性,采用电化学聚合方法可制备其聚合物交联荧光薄膜,扫描电镜(SEM)和原子力显微镜(AFM)研究表明,该荧光薄膜表面平整,有望用于制备有机电致发光器件(OLED),可见该化合物是一种多功能材料.     

近红外与中红外光谱技术在土壤分析中的应用

传统的土壤分析方法周期长、成本高,不能在短时间内获取所需的土壤信息,如何快速、准确地获取土壤信息成为农业现代化的必然要求。漫反射光谱技术以其快速、廉价、非破坏与无污染等特点,已成为环境研究中获取相关土壤信息的重要技术手段,其中的近红外(NIR,780~2 500 nm)和中红外(MIR,2 500~25 000 nm)光谱技术预测土壤理化特性逐渐成为国内外学者研究的重点领域。文章介绍了近红外和中红外光谱技术的基本原理和分析方法,综述了该技术在土壤分析方面的具体应用,并对此提出了一些观点和展望。     

Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.     

多功能合一的含稀土铽高聚物的性质表征

制备了一种新型的含稀土铽高聚物光电材料, 结合元素分析和X射线光电子能谱(XPS)对材料的组成进行分析并确认它的结构. 荧光光谱表明含稀土铽高聚物是一类发纯绿光的发光材料. 用循环伏安法研究它的电化学行为, 测定材料的HOMO和LUMO能级. 研究结果表明, 这种材料同时具有空穴与电子传输功能, 其HOMO和LUMO能级可与电致发光器件的工作电极相匹配.     

Production of Polyacrylic Acid Homo- and Copolymer Films by Electrochemically Induced Free-Radical Polymerization: Preparation and Swelling Behavior

Films of polyacrylic acid hydrogels were produced on a conducting substrate by means of electrochemically initiated polymerization (EIP). An electro-chemical quartz crystal microbalance was used to monitor film growth in situ. Homopolymer and copolymer films of polyacrylic acid and poly-N-isopropylacrylamide were characterized by FTIR spectroscopy. The degree of swelling of these films could be tuned via the pH.     

氨基树脂交联型聚合物的合成及其取向松弛

用双羟基偶氮(或氧化偶氮)苯化合物与对苯二甲酰氯缩聚反应合成了端羟基偶氮(或氧化偶氮)苯低聚物。将其与丁醇醚化氨基树脂进行电场极化交联反应合成交联型非线性光学聚合物。利用红外光谱和紫外可见吸收光谱分别对交联反应、电场极化取向稳定性进行了研究。     

掺杂离子对聚吡咯膜的电化学容量性能的影响

用电化学方法制备了分别以对甲基苯磺酸根(TOS-), 高氯酸根(ClO-4)和氯离子(Cl-)掺杂的聚吡咯(PPy)膜. 用循环伏安(CV)、恒电流充放电和电化学阻抗谱(EIS)等测试了它们的电化学容量性能. 用扫描电镜(SEM)和X射线衍射(XRD)分别研究了这三种PPy膜的形貌和结构. 研究发现, 由于具有疏松多孔的形貌和更有序的分子链结构, PPy-TOS和 PPy-Cl膜具有较好的充放电能力, 在深度充放电时仍具有很小的电化学电阻, 其离子扩散接近理想电容器的离子扩散机理. PPy-Cl(聚合电量2 mAh·cm-2)的比容量在扫描速率为5 mV·s-1时高达270 F·g-1, 扫描速率200 mV·s-1时仍高达175 F·g-1, 特别是, 其比能量高达35.3 mWh·g-1. PPy-TOS由于有质量较大的掺杂离子(TOS-)因而比容量略低(146 F·g-1, 扫描速率5 mV·s-1), 但具有超快速充放电能力, 在扫描速率为200 mV·s-1时, 比容量为123.6 F·g-1, 其比功率高达10 W·g-1. 并且, 两种电极材料均具有稳定的电化学循环性能.     

Arylidene Polymers. XVII. Cyclization of Aromatic Poly[dibenzylidenecyclopentanone-Hydrazide] as a Route to Polyheterocyclic 1,3,4-Oxadiazole and 1,2,4-Triazole

A new interesting class of thermal stable arylidene polymers containing 1,3,4-oxadiazole and 1,2,4-triazole moieties in the main chain have been synthesized from aromatic polyhydrazide I. Cyclization of I at 250°C in the absence of solvent was found to be the best pathway for the inclusion of the 1,3,4-oxadiazole moiety in the main chain. Heating of I with aniline, cyclohexyl amine, or 3-amino pyridine at 180°C for 30 h gave the corresponding 1,2,4-triazole polymers III. The introducing effect of different aromatic, cycloalkyl, and heterocyclic amines in III_a-c and IV_a-c on thermal stability behavior was studied by TGA analysis. Moreover, all the polymers were characterized by elemental and spectral analyses, solubility, and viscometry measurements. X-ray diffractograms of the synthesized polymers showed they had less crystallinity than the polyhydrazide precursors.     

Electrochemically Generated Nanoparticles of Halogen‐Bridged Mixed‐Valence Binuclear Metal Complex Chains

Spherical nanoparticles composed of MMX chains can be made by a polymerization strategy driven by electrochemical processes. In particular, the [Pt₂(MeCS₂)₄I₂] (MMI₂) dimetal subunit is employed as a monomer for the formation of [Pt₂(MeCS₂)₄I]_n spherical nanostructures on surfaces. We have paid particular attention to elucidating the general mechanism of the deposition process on the basis of in situ electrochemical measurements. The reduction of MMI₂ to give the electrodeposition of nanostructures agrees well with formation of the reduced [MMI₂]^? species followed by a disproportionation mechanism mediated by iodide anions. The chemical composition of the particles was determined by energy‐dispersive X‐ray spectroscopy (EDX) and X‐ray photoelectron spectroscopy (XPS) to reveal the MMI₂ polymer.     

交联壳聚糖膜的制备及其性能的研究

用环氧氯丙烷成功地制备出交联壳聚糖膜。用FTIR,XRD和SEM方法表征其结构,并测试了其力学性能。结果表明,壳聚糖在低温下只有氨基参与交联反应,反应温度高于40℃时,羟基才发生反应;环氧氯丙烷的交联作用显着提高了壳聚糖膜的抗张强度,并有效地降低了溶菌酶对其降解速率;该交联膜有望用作可控降解的生物医用材料。     

Electrochemiluminescence Characterization of Poly(luminol‐benzidine) Composite Films and Their Analytical Application

A composite film of poly(luminol‐benzidine) was prepared on the graphite electrode surface by electropolymerizing luminol and benzidine in acidic medium. It was found that the poly(luminol‐benzidine) composite film presented better electrochemiluminescence (ECL) analytical performances for H₂O₂ than that of the polyluminol film. Based on these findings, a more sensitive ECL sensor for H₂O₂ was developed. At the same time, our investigating results on this composite film revealed that, as a real ECL luminophor in this composite film, the polymeric 3‐aminophthalate presented higher fluorescence quantum yield than that in the pure polyluminol film, which suggested that the excellent ECL performances of the composite film may originate from the enhancement of the ECL luminophor quantum yield. Based on these results, a new method to improve the ECL analytical performances of the polymeric luminol was also proposed.     

Synthesis and Characterization of Crosslinked Hyperbranched Polyglycidol Hydrogel Films

Hyperbranched polyglycidol (PGLD) was synthesized via anionic ring‐opening polymerization of glycidol using a special anionic initiator with multiple initiation sites. The resultant polymers were characterized by ¹H and ¹³C‐NMR spectra for confirming their structures, which consisted of linear, hyperbranched and dendritic structures. Molecular weight characteristics were determined by means of the gel permeation chromatography (GPC). With the intention of investigating the possibility of broad applications, PGLD hydrogel films were prepared using various crosslinking agents, i.e., glutaraldehyde and some dicarboxylic acids, and their physical properties such as swelling behavior and tensile (or Young's) modulus were measured and compared.     

安定分子印迹聚合物的制备及应用

以安定为模板分子,通过本体聚合和沉淀聚合的方法合成了分子印迹聚合物材料,考察了交联剂、致孔剂及温度等条件对聚合物材料性能的影响。电镜扫描图片显示本体聚合得到的聚合物呈不规则形状,而沉淀聚合得到的则是微球颗粒,形状规则。吸附实验表明,聚合物微球对安定的最大吸附量约为130μg/g,对奥沙西泮和硝西泮的吸附量约为110μg/g,对安定类化合物具有较高的吸附性能和选择性。通过对比合成现象和聚合物性能,最终选用以DVB为交联剂、乙腈为致孔剂合成的聚合物微球为固相萃取材料填充固相萃取小柱,从饲料及猪尿样品中选择性地分离、富集痕量安定类药物。结合高效液相色谱法检测,奥沙西泮、硝西泮和安定3种药物在0.1～20 mg/L范围内线性良好,相关系数为0.999 6～0.999 9,检出限(S/N=3)为0.03～0.08 mg/L,加标回收率为66%～79%。该方法为安定类药物的检测提供了一种新途径。     

Synthesis and Electrochemical Characterization of Azomethine Containing N-Ethylcarbazole Group

Conjugated aromatic azomethines containing a carbazole group were synthesized. Their structures have been confirmed by IR, MS and UV spectrometries. When iodine was used as the dope to the conjugated compounds, the electrical conductivities （EC） of the doped conjugated compounds were increased by several orders of magnitude. The thermal stability of these two compounds investigated by TGA shows a good result, which guarantees the correct result of EC when the compounds are heated. As can be seen from the CV characterization of the electrochemical properties of these two compounds, the azomethine diamine and p-aminophenyl-9-ethylcarbazolyl azomethine possess electrochemical activity, which arises from the heteroatom of molecules.     

Near- and Mid-Infrared Spectroscopy of Sol-Gel Derived Ormosil Films for Photonics from Tetramethoxysilane and Trimethoxysilylpropylmethacrylate

Ormosil dipped thin films and cast films were prepared using tetramethoxysilane and trimethoxysilylpropylmethacrylate (TMSPM). Structural changes during thermally induced polymerisation of the organic groups were investigated using near- and mid-infrared (IR) spectroscopy. IR spectra of the ormosil dipped thin films, dried at 60°C, have shown that further heat-treatment of the films at 160°C leads to the free radical polymerisation of C=C bonds in TMSPM. In the mid-infrared spectra, the intensity of the band at around 3500 cm^–1, due to O–H bonds, increased with the progress of polymerisation of vinyl groups. Near-infrared spectra of the cast films showed that this increase in intensity of the O–H band is due to the increase of monomeric water molecules hydrogen bonded to silanols. We suggest that optical loss measurements must be made in a dry atmosphere or, with a cover coating to protect the ormosil from adsorption of water, to reduce this source of optical loss for waveguides based on TMSPM.     

L-色氨酸分子印迹传感器敏感膜的制备与性能

以L-色氨酸(L-Trp)为模板分子, 邻苯二胺(o-PD)为功能单体, 在金电极表面原位合成了分子印迹聚合物敏感膜; 通过循环伏安法(CV)、 差示脉冲伏安法(DPV)和电化学阻抗谱法(EIS)考察了该电极的性能. DPV测试结果表明, 在1×10^-8~2×10^-7 mol/L范围内, 峰电流与L-Trp的浓度呈线性关系, 检出限为0.3×10^-8 mol/L; 选择识别性实验结果表明, L-Trp印迹敏感膜的印迹因子达到3.72, 相对于干扰物的选择因子均大于1, 对与L-Trp结构相似的L-酪氨酸(L-Tyr)的选择因子也达到2.30, 说明该印迹膜对L-Trp具有良好的选择性; 识别过程动力学研究结果表明, 印迹膜对L-Trp的识别是一个两步连续发生的过程, 即快结合过程和慢吸附过程.     

电还原氧化石墨烯-金纳米棒修饰电极对酒石黄的测定

本文制备了氧化石墨烯-金纳米棒复合物(GO-GNRs).利用滴涂法制备了修饰电极(GO-GNRs/GCE),通过循环伏安法,还原了GO-GNRs复合物中的GO,制得电化学还原的石墨烯-金纳米棒修饰电极(ERGO-GNRs/GCE).研究了酒石黄在不同电极上的电流响应,结果表明,ERGO-GNRs/GCE对酒石黄的氧化有很好的电催化作用,其浓度在0.05～6.0μmol/L范围内与氧化峰电流呈良好的线性关系,检出限为15 nmol/L.利用ERGO-GNRs/GCE可完成样品中酒石黄含量的测定.     

三偏磷酸钠交联壳聚糖膜的制备及其性能研究

将充分溶胀的壳聚糖膜置于一定浓度的三偏磷酸钠溶液中进行交联反应制备出交联壳聚糖膜。用傅立叶变换红外光谱(FT-IR)、X-射线衍射(XRD)和扫描电镜(SEM)表征了其结构,并测试了其吸水率、力学性能和酶降解性能。研究结果表明,交联作用明显提高了膜的抗张强度和抗水性,并有效地降低了溶菌酶对其降解速率。该交联膜有望用作可控降解生物医用材料。     

PANI膜电聚合过程及电控分离苯酚的EQCM研究

通过电沉积方法在镀铂石英晶片上制备了导电聚苯胺(PANI)膜,采用电化学石英晶体微天平(EQCM)技术探讨了苯胺聚合机制及在苯酚溶液中的氧化还原特性.在0.5 mol/L硫酸溶液中结合循环伏安法考察了PANI膜在完全还原态(L)-半氧化态(E)-完全氧化态(P)之间的电活性和稳定性;在不同浓度的苯酚溶液中结合恒电压阶跃...