表面分子印迹材料和技术在分离分析中的应用进展

复杂体系的高选择性分析对分离新材料和新方法提出了迫切需求。分子印迹聚合物（MIPs）以其特异性高、化学稳定性好、制备简单且成本低等优点,在高选择性分离分析中展现出巨大的应用前景。但以本体聚合为代表的传统合成方法获得的MIPs存在识别位点位于聚合物内部难以识别、模板分子洗脱不彻底、传质速率慢、结合容量低等问题。表面印迹技术制备的核-壳型表面分子印迹材料是解决上述难题的有效途径。通过核体和壳层结构的设计和构建,表面分子印迹材料还可具备多功能、多响应的特性,适于现代分离分析对快速、高效、高选择性的要求。该文主要综述了近几年表面分子印迹技术在样品前处理、化学/生物传感分析及靶向药物递送领域的应用进展。     

核-壳型厚朴酚印迹聚合物的制备及性能研究

以表面修饰功能基团的SiO2微球为基体,以厚朴酚为模板分子,丙烯酰胺为功能单体,丙烯酸乙二醇二甲酯为交联剂,在SiO2微球表面制备对厚朴酚具有较好选择识别能力的核-壳型印迹聚合物.采用红外光谱及扫描电镜等技术表征聚合物的结构及形态.结果表明,该印迹聚合物表面成功制备了壳层厚度约为200nm的均匀印迹层.通过静态吸附、Scatchard分析法以及竞争吸附实验研究了该聚合物的吸附性能和选择性,结果表明,它对厚朴酚形成均一结合位点,离解常数为0.19mg/mL.     

核-壳型苏丹红Ⅰ印迹聚合物微球制备及应用研究

以苏丹红Ⅰ为模板分子,苯基-三甲氧基硅烷(PTMOS)为功能单体,乙二醇二甲基丙烯酸酯(EGD-MA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用表面分子印迹技术,在自制的SiO2微球表面成功合成了对苏丹红Ⅰ具有良好选择识别性能的核-壳型印迹聚合物。采用红外光谱和扫描电子显微镜对分子印迹微球进行表征,结果表明该印迹聚合材料壳层厚度约为150 nm;采用静态吸附实验研究印迹材料对模板聚合物的吸附性能和选择特性,结果表明以PTMOS为功能单体的印迹聚合物对苏丹红Ⅰ具有优异的选择吸附性,其分离选择因子为2.62。在吸附过程中,模板分子苏丹红Ⅰ与印迹聚合物形成2种结合位点,2种结合位点的解离常数分别为2.30、10.78 mmol/L,最大表观结合量分别为27.40、128.53μmol/g。将该印迹聚合物作为固相萃取材料,对样品进行固相萃取,结合液相色谱技术成功用于辣椒油中苏丹红Ⅰ的测定。     

核-壳型过氧化苯甲酰印迹溶胶-凝胶聚合物的制备及应用

以过氧化苯甲酰为模板分子,采用溶胶-凝胶印迹技术在自制的二氧化硅微球表面成功制备对过氧化苯甲酰具有特异性吸附能力的核-壳型印迹材料,并由红外光谱、扫描电镜和差热分析表征了印迹聚合物。该印迹微聚合物分散性好、热稳定好、平均粒径为300nm,印迹聚合物的壳层厚度为50nm。用高效液相色谱研究了印迹聚合物的吸附性能,结果表明该印迹聚合物对过氧化苯甲酰的选择系数为6.59。作为固相萃取材料,该印迹材料已被成功用于面粉中过氧化苯甲酰的分离和富集,回收率为94.98%。     

基于磁球表面的抗原决定基印迹法用于选择性识别细胞色素c的研究

本工作合成了一种核壳型的抗原决定基磁性分子印迹聚合物,并用于选择性识别目标蛋白细胞色素c(Cytochrome c,Cyt c)。制备过程中先用溶剂热法合成Fe_3O_4磁性纳米粒子,然后加入Cyt c其C端的九肽作为模板,进行一段时间的预组装,最后加入多巴胺盐酸盐(DA)溶液,调节反应体系的p H使多巴胺聚合在磁球表面。洗脱掉模板后,即得到分子印迹聚合物。优化DA的用量使聚合物达到最佳的吸附效果。在最优条件下,制得的印迹聚合物对目标蛋白有较好的吸附选择性,并且有良好的重复利用性。此外,用抗原决定基做模板制得的聚合物的吸附容量和印迹因子明显优于用相应蛋白质做模板的情况。     

表面分子(离子)印迹硅胶/聚合物的制备及性能研究进展

分子印迹技术(MIT)是制备对模板分子具有专一识别能力聚合物的技术。目前,把识别位点建立在基质表面的表面印迹技术日益受到重视,它可以提高识别位点与印迹分子的结合速度,进一步加强印迹材料吸附分离效率,硅胶因其具有良好的机械稳定性和热稳定性,吸附选择性高等优点,作为表面印迹的基质显示出较大的优越性。本文详细综述了有机分子印迹硅胶/聚合物及金属离子印迹硅胶/聚合物的制备和性能的研究进展,并对印迹材料将来的应用进行了展望。     

右旋邻氯扁桃酸分子印迹聚合物的制备及结合特性研究

以右旋邻氯扁桃酸为模板分子合成了具有高选择性的分子印迹聚合物作为手性分离材料 .紫外光谱研究说明在聚合开始之前模板分子与功能单体形成了配合物 ,并用Hyperchem软件模拟其分子结构 ,结合能分别为 -1 643 7× 1 0 4 J·mol- 1 和 -4 2 799× 1 0 4 J·mol- 1 .分子印迹聚合物对模板分子的结合量高于其它类似物 ,手性分离因子α达 1 76.Scatchard分析表明分子印迹聚合物在识别右旋邻氯扁桃酸分子过程中存在两类结合位点 ,与配合物模拟结构数目一致     

核壳结构Boc-氨基酸分子印迹分离介质的研究

将硅胶表面硅羟基与γ-（甲基丙烯酰氧）丙基三甲氧基硅烷反应合成具有CC端基的改性硅胶核,进一步以N-Boc-L-色氨酸为模板分子,采用分子印迹技术在改性后的硅胶表面包覆印迹聚合物,制备出核壳结构氨基酸分子印迹分离介质。这种印迹分离介质对模板N-Boc-L-色氨酸具有良好的吸附性,最大饱和吸附量可达到85.96 mg/...     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

紫外光聚合法制备L-DBTA手性分子印迹聚合物的研究Ⅱ.聚合物性能

以丙烯酸为功能单体,二苯甲酰-L-酒石酸(L-DBTA)为模板分子,三羟甲基丙烷三丙烯酸酯(TMPTA)为交联剂,采用紫外光聚合方法合成了L-DBTA手性分子印迹聚合物.通过HPLC表征,表明合成的手性分子印迹聚合物对L-DBTA模板分子具有很好的识别性,L-DBTA的选择性比二苯甲酰-D-酒石酸(D-DBTA)高.通过Scatchard分析表明,L-DBTA手性分子印迹聚合物中只存在一类影响聚合物识别能力的结合位点.293.15K时,结合位点的平衡离解常数为0.064mmol/L,最大表现结合容量为6.4mg/g.MIPs结合热力学研究表明,印迹分子L-DBTA与分子印迹聚合物手性识别基团之间的识别机理可以用Langmuir等温吸附描述,结合热力学参数为△H=7.40 kJ/mol,△S=42.74 J/(mol·K),△G298=-5.34kJ/mol.L-DBTA与MIPs相互作用速率快,表观活化能为7.40 kJ/mol.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.