The Three-Pion Decays of the a1(1260)

We investigate the decay of a₁⁺ (1260)→π⁺π⁺π^- with the assumption that the a₁(1260) is dynamically generated from the coupled channel ρπ and KK^* interactions. In addition to the tree level diagrams that proceed via a₁⁺ (1260)→ρ⁰π⁺→π⁺π⁺π^-, we take into account also the final state interactions of ππ→ππ and KK→ππ. We calculate the invariant π⁺π^- mass distribution and also the total decay width of a₁⁺ (1260)→π⁺π⁺π^- as a function of the mass of a₁(1260). The calculated total decay width of a₁(1260) is significantly different from other model calculations and tied to the dynamical nature of the a₁(1260) resonance. The future experimental observations could test of model calculations and would provide vary valuable information on the relevance of the ρπ component in the a₁(1260) wave function.     

Three-Body Amplitudes of the Process a2(1320) → π+π+π-

We analyze the decay amplitudes of the process a₂(1320) → π⁺π⁺π^- using the tensor analysis technique and show how to obtain three-body amplitudes. The derived amplitudes can describe both the resonance and the background contribution of the process.     

Quasi Three-Body Decay of D Meson

The aim of this work is to provide a phenomenological analysis of the contribution of D~0 meson to K*(892)~0π~+π~-(K*(892)~0-→π~+K~-), K~-π~+ω(ω-→π~+π~-π~0) and K~-π~+?(?(1020)-→ K~+K~-) quasi-three-body decays. The analysis of mentioned multi-body decays is such as to factorize into the three-body decay and several channels observed. Hadronic three-body decays receive both resonant and non-resonant contribution. Based on the factorization method, there are tree and emission annihilation diagrams for these decay modes. In the case of D~0 to vector pseudoscalar states appeared in factored terms, the matrix elements of the vector and axial vector currents between the D~0 and PV mesons can be computed by using D~(*+)pole. Considering the non-resonant and resonant amplitude in our computation,the theoretical values of the branching ratio are(9.78 ± 0.46) × 10~(-3),(2.74 ± 0.17) × 10~(-2), and(3.53 ± 0.23) × 10~(-5), while the experimental results of them are(9.9 ±2.3) × 10~(-3),(2.7 ± 0.5) × 10~(-2), and(4 ± 1.7) × 10~(-5) respectively. Comparing computational analysis values with experimental values show that our results are in approximately agreement with them.     

ξ(2230) Is Likely to Be a Glueball

On the basis of the recent results of ξ(2230) → π⁺π^-, pp and ξ(2230) → K⁺K^-, K_sK_s, measured by the BES Collaboration in J/ψ radiative decays, combined with the PSI85 experiment of pp → ξ(2230) → KK we argue that because of its very narrow partial decay widths to nn and KK (less than 1 MeV), its large production rate in J/ψ radiative decays (BR(J/ψ → γξ> 2.3×10^-3), and its flavor-symmetric couplings to ππ and KK, the ξ(2230) is very likely to to be a J^PC= (even)⁺⁺ glueball.     

THE QUARK MASS EFFECT OF THE DISTRIBUTION AMPLITUDES IN γγ-EXCLUSIVE PROCESSES

In this paper we have analyzed the γ^*π°→γ, γγ→ππ and γγ→ρρ processes by using the sum rules of the distribution amplitude ФM(xi,Q²), which are obtained from the π°→γγ and the π→μν decay processes. Since the angular distributions of the γγ→π°π° and γγ→ρ_⊥ρ_⊥ amplitudes are sensitive to the shape of the distribution amplitude ФM(xi,Q²), there is a possibility to investigate the effect of the quark mass from the angular distributions of γγ→MM exclusive processes.     

The ρ-π Puzzle of J/φ and φ′ Decays

The recent BES Collaboration data on φ →PV, particularly the isospin violating mode φ′ → π^oω^o and finding of a finite number for B(φ′ → K^*OK^O), enable us now to deal more precisely about the challenges to theory concerning this extraordinary and remarkableso-called ρ-π puzzle of J/φ and φ′ decays. In terms of the existing data and deploying the simplest phenomenology, measurement of φ′ → π⁺π^- and whether a finite number for the K^*+K^- mode might require a significantly large accumulation of data remain interesting questions.     

Vacuum Polarization Bubble Effects on the Triangle Relations for B Meson Charmless Decay Amplitudes

Assuming that factorization is valid and that contributions of the exchange, annihilation, and penguin-annihilation diagrams are negligible, we study the effects of the QCD vacuum polarization bubbles on the decay amplitudes of some B meson charmless decays into two light pseudoscalars. The bubbles have much less effects on B⁰→π⁺π^-, π^-K⁺, π⁰K⁰ than on B⁰→π⁰π⁰ thus the triangle relation √2A(B⁺→π⁺π⁰) = A(B⁰→π^-K⁺)/R_u+√2A(B⁰→π⁰K⁰)/R_u is changed slightly while √2A(B⁺→π⁺π⁰)=√2A(B⁰→π⁰π⁰)+A(B⁰→π⁺π^-) is altered significantly. This may indicate that in order to test or use these triangle relations other higher order QCD corrections should also be carefully taken into consideration.     

Ising spin glass on a D = 3 hierarchical lattice: Effects of tailed coupling distributions

Within a real-space renormalization-group framework, we approach the cubic lattice through a D = 3 diamond-like hierarchical lattice. The model is a standard, nearest-neighbor, Ising spin glass with coupling constants {J_ij} distributed according to the family of continuous probability distributions P_q(J_ij) ∝ 1/[1 + (q − 1)J_ij²/2J²]^{1/(q − 1)} (if 1 + (q − 1) J_ij²/2J² > 0, and zero otherwise; q ). Such distributions, which arise naturally in the treatment, within the recently proposed nonextensive thermostatistics, of anomalous diffusion, reproduce the usual, Gaussian case, for q → 1. Moreover, they present a second moment J_ij² proportional to (5 − 3q)⁻¹ for q < 5/3, diverging for q ≥ 5/3, but keeping a finite width at midheight. In the limit q → 3, P_q(J_ij) collapses with the abscissa, and so the width at midheight diverges. We compute the q-dependence of the spin-glass critical temperature T_c. We show numerically that T_c does not scale with J_ij^21/2 (contrary to the usual belief), but rather with the width at midheight of P_q(J_ij). Our results suggest that T_c vanishes as −1/q when q → −∞; furthermore, we verified that T_c diverges exponentially when q approaches 3 from below.     

75As32S+和75As34S+离子的光谱常数与分子常数

采用内收缩多参考组态相互作用(MRCI)方法, 结合Dunning系列相关一致基, 分别对⁷⁵As³²S⁺和⁷⁵As³⁴S⁺离子的X³Σ^-和A¹Π电子态的势能曲线进行了计算, 进一步拟合势能曲线, 得到各电子态的光谱常数与分子常数. 首先, 采用MRCI方法结合相关一致基, aug-cc-pV5Z, 对AsS⁺离子的X³Σ^-和A¹Π 电子态进行了计算, 获得相应的势能曲线; 然后, 为进一步提高势能曲线的精度, 对其进行了三种修正计算. 采用Davidson(+Q)方法修正MRCI 方法计算过程中存在的基组大小不一致缺陷; 利用二阶Douglas-Kroll哈密顿近似, 在cc-pVQZ基组水平, 修正了相对论效应对势能曲线的影响; 利用两点能量外推法, 在aug-cc-pVQZ和aug-cc-pV5Z基组水平对各能量点的势能值进行了外推, 得到完全基组极限处的势能曲线. 最后, 利用修正(包括Davidson修正、相对论修正和基组外推)后的势能曲线, 通过Vibrot程序, 求解双原子分子核运动的径向Schrödinger方程, 并进行同位素质量识别, 得到⁷⁵As³²S⁺和⁷⁵As³⁴S⁺离子两个电子态的光谱常数(T_e, R_e, ω_e, ω_ex_e, α_e 和B_e)和分子常数(G(ϒ), B_v, D_v).     

Binding energy of an exciton bound to ionized donors in quantum dots

Binding energies for an exciton (X) trapped in the two-dimensional quantum dot by a positive ion located on the z axis at a distance d from the dot plane are calculated by using the method of few-body physics. This configuration is called a barrier (D⁺,X) center. The dependence of the binding energy of the ground state of the barrier (D⁺,X) center on the dot radius for a few values of the distance d between the fixed positive ion on the z axis and the dot plane is obtained. We find that when d<0.2nm the barrier (D⁺,X) center does not form a bound state.     

Measurement of the average polarization of B produced by polarized muons in the μ + C → νμ + B reaction

The average polarization of ¹²B produced by the capture of polarized muons in ¹²C has been measured using recoil implantation techniques. From the result we deduce the average polarization of the ¹²B ground state ¹²B(0) corresponding to the ¹²C → ¹²B(0) Gamow-Teller reaction: J_μ(0) = 0.43 ± 0.10. The sizeable deviation of this polarization from the value of 2/3, characteristic of a “bare” 0⁺ → 1⁺ process, is a fair evidence for induced axial-vector interaction(s) in muon capture. The ratio of the induced pseudoscalar and the axial-vector coupling constants is deduced to be: g^μ_P/g^μ_A = 12 ± 5.     

Granularity, microstructure, and flux creep in TlBa2Ca2Cu3O9+δ superconducting powder and silver-sheated tapes

Silver-sheathed TlBa₂Ca₂Cu₃O_9+δ (Tl-1223) tapes, with a transport critical current density, J_ct, of 6200 A/cm² at 75 K under zero magnetic field, were fabricated by the oxide-powder-in-tube (OPIT) method and characterized using an X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and superconducting quantum interference device (SQUID) magnetometer. The results of the magnetization and SEM study indicate that, in these tapes, individual grains are distributed randomly in orientation and weak links exist. However, strongly linked percolative current paths within the tape persisting in increasing fields, accompanied by strong intrinsic interplanar coupling, sustain a significant J_ct at high fields and lead to the plateau in the J_ct-H curve. Dislocation networks, which may act as effective pinning centers, are the common features observed in the tapes. To investigate the effects on flux pinning due to thermomechanical processing, magnetic relaxation at 1 and 2 T over 5–50 K was measured. The tape shows slightly lower normalized relaxation rates (S=-(1/M_o)dM/ dln t) than the cauliflower-like precursor powder. Analyses of the relaxation data obtained from the tape, after incorporating temperature dependence and field scaling, yield an expression for the effective pinning energy U_eff(J,T,H) = (U₁/H^0.54)[1-(T/ 72.5)²]⁴(J/J_i)^μ. This result was compared with the prediction of the collective flux-creep model, which suggests that Tl-1223 has a three-dimension-like (3D-like) vortex lattice. Presumably, a more plate-like powder morphology may result in improved texturing by the OPIT process. Tl_0.5Bi_0.5Sr₂CaCu₂O_7+δ ((Tl,Bi)-1212) powder with this morphology was therefore synthesized for comparison.     

Effective activation energy Ue(T,J,H) in textured Bi1.84Pb0.4Sr2Ca2Cu3Oy silver-clamped thick films

We have measured the resistivity of textured Bi_1.84Pb_0.4Sr₂Ca₂Cu₃O_y silver-clamped thick films as a function of temperature, current density ranging from 10 to 1×10³ A/cm² and magnetic field up to 0.3 T. We find that the effective activation energy U_e follows U_e(T,J,H)=U₀(1−T/T_p)^mln(J_c0/J)H⁻ with m=1.75 for Hab-plane and 2.5 for Hc-axis and =0.76 for Hab and 0.97 for Hc, for the current density regime above 100 A/cm², where T_p is a function of applied magnetic field and current density. This result suggests the effective activation energy U_e be correlated with the temperature, current density and magnetic field. The possible dissipative mechanisms responsible for the temperature, current density and magnetic field dependence of the effective activation energy are discussed.     

STUDIES OF P-MESCN DECAY BY THE TRANSITION POTENTIAL Vq-qqq OF A QUARK-ANTIQUARK PAIR CREATIOR MODEL

Decay rate of p-meson into two n-mesons was calculated by using the transition potential of a quark-antiguark pair creation model.The theoretical result is in good agreement with the experimental data .Also, the difference of decay widths for processes ρ^±π^±π⁰ and ρ⁰π⁺π^- was discussed.     

CP test in J/ψ→γφφ decay

We propose to test CP symmetry in the decay J/ψ→γφφ, for which large data sample exists at BESII, and a data sample of 10¹⁰ J/ψ's will be collected with BESIII and CLEO-C program. We suggest some CP asymmetries in this decay mode for CP test. Assuming that CP violation is introduced by the electric- and chromo-dipole moment of charm quark, these CP asymmetries can be predicted by using valence quark models. Our work shows a possible way to get information about the electric- and chromo-dipole moment of charm quark, which is little known. Our results show that with the current data sample of J/ψ, electric- and chromo-dipole moment can be probed at order of 10⁻¹³ e cm. In the near future with a 10¹⁰ data sample, these moments can be probed at order of 10⁻¹⁴ e cm.     

What can we learn from B→DsKπ, Bd→DsKπ and Bd→DsK decays?

We study the nonresonant three-body decays of B⁺→D^(*)−_sK⁺π⁺ and B_d→D_s^(*)−K⁰π⁺. We find that these decays can provide the information on the time-like form factors of D^(*)_sK. We also explicitly investigate B_d→D_s^(*)−K^*+ decays by discriminating the nonresonant contributions with the unknown D^(*)_s wave functions being fixed by the measured mode of B_d→D_s⁻K⁺.     

LiAl分子基态、激发态势能曲线和振动能级

利用单双激发多参考组态相互作用方法获得了LiAl分子基态X¹∑⁺及七个激发态a³∏, A¹∏, b³∑⁺, c³∑⁺, B¹∏, C¹∑⁺, d³∏的势能曲线, 通过势能曲线得到各态的平衡核间距R_e, 进而求得绝热激发能和垂直激发能.计算结果表明:c³∑⁺ 电子态是一个不稳定的排斥态, A¹∏态是一个较弱的束缚态, 其余6个电子态均为束缚态; b³∑⁺与 c³∑⁺态之间存在预解离现象; 8个电子态分别解离到两个通道, 即Li(²S)+Al(²P⁰)与Li(²P⁰)+Al(²P⁰). 接着将势能曲线拟合到Murrel-Sorbie解析势能函数形式, 据此获得各态的光谱数据:基态X¹∑⁺的平衡键长为0.2863 nm, 谐振频率为316 cm^-1, 解离能D_e为1.03 eV, 激发态a³∏, A¹∏, b³∑⁺, c³∑⁺, B¹∏, C¹∑⁺, d³∏的垂直激发能依次为0.27, 0.83, 1.18, 1.14, 1.62, 1.81, 2.00 eV; 解离能依次为1.03, 0.82, 0.26, 排斥态, 1.54, 1.10, 0.93 eV, 相应谐振频率 ω_e为339, 237, 394, 排斥态, 429, 192, 178 cm^-1. 通过求解核运动的薛定谔方程找到了J=0时 LiAl分子7个束缚电子态的振动能级和转动惯量. 关键词： LiAl 光谱常数 势能曲线 振动能级     

Interpretation of the Θ as an isotensor pentaquark with weakly decaying partners

The Θ⁺(1540), recently observed at LEPS, DIANA and CLAS, is hypothesized to be an isotensor resonance. This implies the existence of a multiplet where the Θ⁺⁺, Θ⁺ and Θ⁰ have isospin-violating strong decays, and the Θ⁺⁺⁺ and Θ⁻ have weak decays and so are long-lived. Production mechanisms for the weakly-decaying states are discussed. The J^P assignment of the Θ is most likely 1/2⁻ or 3/2⁻.     

Fabrication, microstructure and critical current density of screen-printed Ag-(Bi, Pb)2Sr2Ca2Cu3Ox superconducting tapes

The influence of the sintering conditions on the microstructure and critical current density J_c has been studied on screen-printed Ag-(Bi, Pb)₂Sr₂Ca₂Cu₃O_x tapes with a ceramics mono-layer core. Three kinds of fabrication processes, which consist of a combination of cold working (rolling and/or pressing) and sintering, are applied. Four times repetition of pressing and sintering after the pre-sintering produces the highest c-axis alignment and achieves J_c= 1.5 × 10⁴ A/cm² (77 K, 0 T). The J_c versus θ data with an angle θ between B and the c-axis elucidate the relation between the anisotropy ratio γ=J_c(Bc)/J_c(B|c and the half-height angular width Δθ of a peak for Bc. This is related to both grain alignment and the J_c value. An increase in J_c, which comes from an improvement for grain alignment, enhances γ and narrows Δθ. The J_c versus θ data are fitted to the expression J_c(B, θ)=J _c(B, 90°)/[(γ−1)|cos θ|ⁿ+1] by regarding both γ and n as adjustable parameters. Fabrication of screen-printed tapes with multilayers (1≤N≤5) is presented, where the critical current increases from 8.0 A to 30.2 A at 77 K and 0 T as N increases.