First principles study on magnetic and electronic properties with rare-earth atoms doped SWCNTs

The adsorptions of rare-earth (RE) atoms on (6, 0) and (8, 0) single-walled carbon nanotubes (SWCNTs) have been investigated by using the first-principles pseudopotential plane wave method within density functional theory (DFT). The binding energy, Mulliken charge, magnetic properties, band structure and DOS were calculated and analyzed. Most of RE atoms including Nd, Sm and Eu have a magnetic ground state with a significant magnetic moment. Some electrons transfer between RE-5d, 6s and C-2p orbitals. Owing to the curvature effect, the values of binding energy for RE atoms doped (6, 0) SWCNT are lower than those of the same atoms on (8, 0) SWCNT. The pictures of DOS show that hybridizations between RE-5d, 6s states and C-2p orbitals and between RE-4f and C-2p orbitals appear near the Fermi level. Results indicate that the properties of SWCNTs can be modified by the adsorptions of RE atoms.     

Electronic properties of BN-doped bilayer graphene and graphyne in the presence of electric field

In the present paper, we have used density functional theory to study electronic properties of bilayer graphene and graphyne doped with B and N impurities in the presence of electric field. It has been demonstrated that a band gap is opened in the band structures of the bilayer graphene and graphyne by B and N doping. We have also investigated influence of electric field on the electronic properties of BN-doped bilayer graphene and graphyne. It is found that the band gaps induced by B and N impurities are increased by applying electric field. Our results reveal that doping with B and N, and applying electric field are an effective method to open and control a band gap which is useful to design carbon-based next-generation electronic devices.     

并苯纳米环[6]CA及其衍生物的电子结构和光物理性质的密度泛函理论研究

采用密度泛函理论PBE0方法在6-31G(d, p) 基组水平上对比研究并六苯纳米环[6]CA及BN取代纳米环[6]CA-BN的几何结构及电子性质. 同时探讨锂离子掺杂对不同体系的芳香性、前线分子轨道、电子吸收光谱及传输性质的影响. 通过电离势、亲合势及重组能的计算, 预测纳米环体系得失电子的能力及传输性能. 结果表明:[6]CA的能隙很小, BN取代后, 能隙明显增大; 锂离子掺杂到两种纳米环中, 在不明显改变前线分子轨道分布的前提下, 几乎同步降低了最高占据轨道、 最低未占据轨道能级, 锂离子掺杂使载流子传输性能得到很大改善; 电子吸收光谱拟合发现, BN取代使吸收光谱很大程度蓝移, 吸收强度明显减小; 而锂离子掺杂对光谱的强度及吸收范围没有明显影响. 关键词： 碳纳米环 硼氮纳米环 锂离子掺杂 密度泛函理论     

Ni掺杂ZnO团簇的结构和磁性质

采用第一性原理方法研究Ni原子单掺杂和双掺杂（ZnO）₁₂团簇的结构和磁性质.考虑替代掺杂、外掺杂和内掺杂三种掺杂方式.研究发现：不管是单掺杂还是双掺杂,外掺杂团簇都是最稳定结构.Ni原子之间的磁性耦合由直接的Ni-Ni反铁磁耦合和Ni和O原子之间通过p-d杂化产生的铁磁耦合这两种相互作用的竞争来决定.最重要的是,外双掺杂和内双掺杂团簇都存在铁磁耦合,在纳米量子器件有潜在的应用价值.     

半导体性单壁碳纳米管与其石墨衬底表面相互作用的第一性原理计算

利用基于密度泛函理论的计算方法,研究了处于石墨（HOPG）表面的半导体性单壁碳纳米管,发现碳纳米管下面的石墨受碳管的作用向下凹陷,而纳米管本身虽然保持其形状不变,但它的电子态受石墨衬底影响,造成导带下移,禁带宽度明显减小. 关键词： 单壁碳纳米管 密度泛函理论 局域密度近似方法     

MnTe电子结构和磁性的第一性原理研究

采用基于密度泛函理论的赝势投影缀加波方法, 对六种典型的二元晶体结构Rocksalt (RS), Cesiun-chloride (CC), Zinc-blende (ZB), Wurtzite (WZ), Iron-silicide (IS) 和Nickel-Arsenide (NA)的MnTe进行了计算研究. 通过比较六种结构的结合能, 确定了MnTe的基态结构是反铁磁的NA结构. 研究了这六种结构MnTe的电子结构、磁性, 并用Birch-Murnaghan状态方程拟合求得了各相结构的体弹性模量和相变压. 电子态密度表明, RS, CC和IS结构的MnTe为反铁磁导体, ZB, WZ和NA结构的MnTe均为反铁磁半导体.     

Half-Heusler合金Cu1-xFexMnSb的电子结构和反铁磁-铁磁相变

基于密度泛函理论（DFT）,使用局域密度近似（LDA）研究了Heusler合金Cu1-xFexMnSb的电子结构和反铁磁-铁磁相变。研究发现,两种磁状态下的合金晶格常数随掺杂浓度x变化很好地满足Vegard定理。当x>0.5时,铁磁态合金的总磁矩很好地符合SP规律,然而当x<0.5时,却发生了明显的偏离。由于整个体系存在RKKY和超交换磁耦合的竞争,因而在x=0.25时,我们观察到了独特的反铁磁—铁磁相变。进一步的态密度分析发现,Cu的掺杂浓度可以有效调整铁磁态合金的费米面位置,并且反铁磁态合金由于不同自旋方向的Mn原子的分波态密度相互补偿,总态密度形成了几乎完全对称的自旋向上带和自旋向下带。     

Half-Heusler合金Cu1-xFexMnSb的电子结构和反铁磁-铁磁相变简

基于密度泛函理论(DFT),使用局域密度近似(LDA)研究了Heusler合金Cu1-xFex MnSb的电子结构和反铁磁-铁磁相变.研究发现,两种磁状态下的合金晶格常数随掺杂浓度x变化很好地满足Vegard定理.当x0.5时,铁磁态合金的总磁矩很好地符合SP规律,然而当x0.5时,却发生了明显的偏离.由于整个体系存在RKKY和超交换磁耦合的竞争,因而在x=0.25时,我们观察到了独特的反铁磁—铁磁相变.进一步的态密度分析发现,Cu的掺杂浓度可以有效调整铁磁态合金的费米面位置,并且反铁磁态合金由于不同自旋方向的Mn原子的分波态密度相互补偿,总态密度形成了几乎完全对称的自旋向上带和自旋向下带.     

Electronic and magnetic properties of single-wall GeC nanotubes filled with iron nanowires

Under GGA, the structural, electronic and magnetic properties of single-wall (8, 8) GeC nanotubes filled with iron Fe_n nanowires (n = 5, 9, 13 and 21) have been investigated systematically using the first-principles PAW potential within DFT. We find that the initial shapes of the Fe₅@(8, 8), Fe₉@(8, 8) and Fe₁₃@(8, 8) systems are preserved without any visible changes after optimization. But for the Fe₂₁@(8, 8) system, the initial shapes are distorted largely for both nanowire and nanotube. The binding processes of Fe_n@(8, 8) systems are exothermic, and Fe₅@(8, 8) system is the most stable structure. The pristine (8, 8) GeCNT is nonmagnetic and direct semiconductor with a wide band gap of about 2.65 eV. Projected densities of states onto different shell Fe atoms show that the separation between the bonding and antibonding d states is reduced as going from the core Fe atom to the outermost shell Fe atom. The spin polarization of the Fe_n@(8, 8) systems and free-standing nanowires are higher than that in bulk Fe. And the spin polarization generally decreases with the number n of the Fe atoms increasing for both the Fe_n@(8, 8) systems and free-standing nanowires. Both the largest spin polarization value itself and not more decrease with respect to value of free-standing Fe₅ nanowire suggest the Fe₅@(8, 8) system could be of interest for the use in electron spin injection. The magnetism is mainly confined within the inner Fe nanowire for these combined systems. More importantly, the Fe₅ nanowire encapsulated inside (8, 8) GeCNT is under the protection of the GeCNT to prevent from oxidation, thus may stably exist in atmosphere for long time and can be expected to have potential applications in building nanodevices.     

Zn,Cd掺杂AlN电子结构的第一性原理计算

基于密度泛函理论(DFT)框架下的第一性原理的平面波超软赝势方法(USPP),对Zn,Cd掺杂AlN的32原子超原胞体系进行了几何结构优化,从理论上给出了掺杂和非掺杂体系的晶体结构参数。计算了掺杂AlN晶体的结合能、电子态密度、差分电荷密度,并对计算结果进行了细致的分析。计算结果表明,Cd、Zn都可以提供很多的空穴态,是良好的p型掺杂剂,但是相对于Cd, Zn原子在AlN晶体中的溶解度更大,并且可以提供更多的空穴,有利于形成更好的p型电导。     

Ni掺杂MgF2电子结构和光学性质的第一性原理研究

基于密度泛函理论(DFT) 的第一性原理平面波超软赝势方法,计算了过渡金属Ni不同比例（16.67%,12.5%,8.33%,6.25%）掺杂MgF2晶体的几何结构、电子结构和光学性质。通过对比发现,由于Ni原子的掺入, 体系的禁带宽度减小且能带中出现中间杂质带。另外, 介电函数虚部以及吸收光谱图中均出现双峰结构,结合前人的计算给出了详细的物理机制。上述现象,揭示了Ni掺杂MgF2 体系在光学元器件方面的潜在应用。     

Ni掺杂MgF2电子结构和光学性质的第一性原理研究

基于密度泛函理论(DFT) 的第一性原理平面波超软赝势方法,计算了过渡金属Ni不同比例（16.67%,12.5%,8.33%,6.25%）掺杂MgF2晶体的几何结构、电子结构和光学性质。通过对比发现,由于Ni原子的掺入, 体系的禁带宽度减小且能带中出现中间杂质带。另外, 介电函数虚部以及吸收光谱图中均出现双峰结构,结合前人的计算给出了详细的物理机制。上述现象,揭示了Ni掺杂MgF2 体系在光学元器件方面的潜在应用。     

水分子链受限于单壁碳纳米管结构的密度泛函理论研究

本文采用第一性原理的密度泛函理论,主要以(6,6)Armchair型,(11,0)Zigzag型单壁碳纳米管为研究对象,研究了水分子链在碳纳米管内部吸附的稳定结构,以及结合能随其结构的变化.结果表明:当水分子链受限于碳纳米管内部时,引起碳纳米管直径收缩,这主要是由于水分子链与碳纳米管之间的氢键作用以及范德华弱相互作用所引起的.随着碳纳米管半径的增加,两种单体之间的结合能逐渐减小,但当碳纳米管半径增加至6.78时,其结合能又有所增加,这是由于在优化过程中,水分子链单体之间的氢键作用大于水分子链与碳纳米管之 关键词： 水分子链/单壁碳纳米管 密度泛函理论 结构稳定性     

Structural, curvature and electronic properties of Rh adsorption on armchair single-walled carbon nanotube

This paper systematically studies the rolling effects of the (n, n) single-wall carbon nanotubes (SWCNT) with different curvatures on Rh adsorption behaviours by using density functional theory. The outside charge densities of SWCNTs are found to be higher than those inside, and the differences decrease with the increase of the tube radius. This electronic property led to the discovery that the outside adsorption energies are higher than the inside ones, and that the differences are reduced with the increase of the tube radius. Partial density of states and charge density difference indicate that these strong interactions induce electron transfer between Rh atoms and SWCNTs.     

Cr掺杂ZnO纳米线电子性质和磁性质

本文采用第一性原理密度泛函理论系统的研究了Cr原子单掺杂和双掺杂两种尺寸ZnO纳米线的电子性质和磁性质.所有掺杂纳米线的形成能都比纯纳米线的形成能低,表明掺杂增强了纳米线的稳定性.研究发现Cr原子趋于替代纳米线表面的Zn原子.所有掺杂纳米线都显示了金属性.纳米线的总磁矩主要来源于Cr原子3d轨道的贡献.由于杂化,相邻的O原子和Zn原子也产生了少量自旋.在超原胞内,Cr和O原子磁矩反平行排列,表明它们之间是反铁磁耦合.表面双掺杂纳米线铁磁态能量比反铁磁态能量低149 meV,表明Cr掺杂ZnO纳米线可能获得室温铁磁性.     

Structural, electronic and magnetic properties of the 3d transition metal-doped GaN nanotubes

We have performed first-principles calculations on the structural, electronic and magnetic properties of seven different 3d transition-metal (TM) impurity (V, Cr, Mn, Fe, Co, Ni and Cu) doped armchair (5,0) and zigzag (8,0) gallium nitride nanotubes (GaNNTs). The results show that there is distortion around 3d TM impurities with respect to the pristine GaNNTs for 3d TM-doped (5,5) and (8,0) GaNNTs. The change of total magnetic moment follows Hund’s rule for 3d TM-doped (5,5) and (8,0) GaNNTs, respectively. The total density of states (DOS) indicates that Cr-, Mn-, Fe- and Ni-doped (5,5) GaNNTs as well as Cr-, Mn-, Ni- and Cu-doped (8,0) GaNNTs are all half-metals with 100% spin polarization. The study suggests that such TM-doped nanotubes may be useful in spintronics and nanomagnets.     

Electronic structures and mechanical properties of Al(111)/ZrB2(0001) heterojunctions from first-principles calculation

Employing first-principles density functional theory (DFT), the structures and electronic and mechanical properties of Al(111)/ZrB₂(0001) heterojunctions are investigated. It is found that both B-terminated ZrB₂(0001) and Zr-terminated ZrB₂(0001) can form heterojunction interfaces with Al(111) surface. The heterojunction with B-terminated ZrB₂(0001) is demonstrated to be most stable by comparing the surface adhesion energies of six different heterojunction models. In the stable configurations, the Al atom is found projecting to the hexagonal hollow site of neighbouring boron layer for the B-terminated ZrB₂(001), and locating at the top site of the boron atoms for Zr-terminated ZrB₂(001) interface. The mechanisms of interface interaction are investigated by density of states, charge density difference and band structure calculations. It is found that covalent bonds between surface Al atoms and B atoms are formed in the B-terminated heterojunction, whereas the Al atoms and Zr atoms are stabilised by interface metallic bonds for the Zr-terminated case. Mechanical properties of Al/ZrB₂ heterojunctions are also predicted in the current work. The values of moduli of Al/ZrB₂ heterojunctions are determined to be between those of single crystal Al and ZrB₂, which exhibit the transition of mechanical strength between two bulk phases. DFT calculations with the current models provide the mechanical properties for each heterojunction and the corresponding contributions by each type of interface in the composite materials. This work paves the way for industrial applications of Al(111)/ZrB₂(0001) heterojunctions.     

Electronic structures and magnetic properties of Zn-and Cd-doped AlN nanosheets:A first-principles study

In this paper, the magnetic properties, electronic structures and the stabilities of Zn/Cd incorporated two-dimensional Al N nanosheets are investigated by the first-principles method. Numerical results indicate that Zn and Cd substituting Al atom in Al N nanosheets introduce some holes into the 2p orbitals of the N atoms, and the holes mainly come from spindown 2p orbitals of the N atoms. The magnetic moment of 1.0 μBis produced by Zn/Cd doping Al N nanosheets, and the main component of the magnetic moment of the system is contributed by the partially filled 2p states of the N atoms around the dopant. In particular, when Zn/Cd substituting Al atoms, the magnetic coupling is found to be ferromagnetic. We attribute the hole-mediated p–d interaction to the created ferromagnetic coupling. More importantly, the result of formation energy indicates that Al atom is more inclined to be replaced by Zn atom rather than Cd. This finding is beneficial to developing the spin electronic devices.     

Electronic structures and magnetoelectric properties of tetragonal BaFeO3: an ab initio density functional theory study

First-principles calculations have been performed to investigate the ground state electronic properties of BaFeO₃ (BFO). Local spin density approximation (LSDA) plus U (LSDA+U) treatment modified the metallic behaviour to insulated one with a band gap of 4.12eV. The spontaneous polarization was found to be 89.3\muC/cm² with Berry phase scheme in terms of the modern theory of polarization. Fe-3d e_g were split into two singlet states (d_z² and d _x²-y²}), and Fe-3d t_2g were split into one doublet states(d_xz and d_yz) and one singlet states(d_xy) after Fe and O displaced along the c axis. Meanwhile the occupation numbers of d_z², d_yz, d_xz and O_T p_z (on the top of Fe) were increased at the expense of those in xy plane. Our results showed that it was the sensitivity of hybridization to ferroelectric distortions, not just the total change of hybridization, that produced the possibility of ferroelectricity. Moreover, the increasing occupation numbers of O_T p_z and Fe d_z² favoured the 180^o coupling between Fe-3d e_g and Fe-3d t_2g, leading to ferromagnetic ordering, which has been confirmed by the increase of magnetic moment by 0.13μ_B per formula unit in the polarized direction. Hence, the magnetization can be altered by the reversal of external electric field.     

Structural and electronic properties of endohedral doped SWCNTs: A DFT study

The structural and electronic properties of semiconductors (Si and Ge) and metal (Au and Tl) atoms doped armchair (n, n) and zigzag (n, 0); n=4–6, single wall carbon nanotubes (SWCNTs) have been studied using an ab-initio method. We have considered a linear chain of dopant atoms inside CNTs of different diameters but of same length. We have studied variation of B.E./atom, ionization potential, electron affinity and HOMO–LUMO gap of doped armchair and zigzag CNTs with diameter and dopant type. For armchair undoped CNTs, the B.E./atom increases with the increase in diameter of the tubes. For Si, Ge and Tl doped CNTs, B.E./atom is maximum for (6, 6) CNT whereas for Au doped CNTs, it is maximum for (5, 5) CNTs. For pure CNTs, IP decreases slightly with increasing diameter whereas EA increases with diameter. The study of HOMO–LUMO gap shows that on doping metallic character of the armchair CNTs increases whereas for zigzag CNTs semiconducting character increases. In case of zigzag tubes only Si doped (5, 0), (6, 0) and Ge doped (6, 0) CNTs are stable. The IP and EA for doped zigzag CNTs remain almost independent of tube diameter and dopant type whereas for doped armchair CNTs, maximum IP and EA are observed for (5, 5) tube for all dopants.