The Three-Pion Decays of the a1(1260)

We investigate the decay of a₁⁺ (1260)→π⁺π⁺π^- with the assumption that the a₁(1260) is dynamically generated from the coupled channel ρπ and KK^* interactions. In addition to the tree level diagrams that proceed via a₁⁺ (1260)→ρ⁰π⁺→π⁺π⁺π^-, we take into account also the final state interactions of ππ→ππ and KK→ππ. We calculate the invariant π⁺π^- mass distribution and also the total decay width of a₁⁺ (1260)→π⁺π⁺π^- as a function of the mass of a₁(1260). The calculated total decay width of a₁(1260) is significantly different from other model calculations and tied to the dynamical nature of the a₁(1260) resonance. The future experimental observations could test of model calculations and would provide vary valuable information on the relevance of the ρπ component in the a₁(1260) wave function.     

Observation of B+-->a1+(1260)K0 and B0-->a1-(1260)K+

We present branching fraction measurements of the decays B(+)-->a(1)(+)(1260)K(0) and B(0)-->a(1)(-)(1260)K(+) with a(1)(+/-)(1260)-->pi(-/+)pi(+/-)pi(+/-). The data sample corresponds to 383 x 10(6) BB pairs produced in e(+)e(-) annihilation through the Upsilon(4S) resonance. We measure the products of the branching fractions B(B(+)-->a(1)(+)(1260)K(0)B(a(1)(+)(1260)-->pi(-)pi(+)pi(+))=(17.4+/-2.5+/-2.2) x 10(-6) and B(B(0)-->a(1)(-)(1260)K(+)B(a(1)(-)(1260)-->pi(+)pi(-)pi(-)) = (8.2+/-1.5+/-1.2) x 10(-6). We also measure the charge asymmetries A(ch)(B(+)-->a(1)(+)(1260)K(0) = 0.12+/-0.11+/-0.02 and A(ch)(B(0)-->a(1)(-)(1260)K+) = -0.16+/-0.12+/-0.01. The first uncertainty quoted is statistical and the second is systematic.     

Evidence for charged B meson decays to a1+/-(1260)pi0 and a1(0)(1260)pi+/-

We present measurements of the branching fractions for the decays B;{+/-}-->a_{1};{+/-}(1260)pi;{0} and B;{+/-}-->a_{1};{0}(1260)pi;{+/-} from a data sample of 232x10;{6} BB[over ] pairs produced in e;{+}e;{-} annihilation through the Upsilon(4S) resonance. We measure the branching fraction B(B;{+/-}-->a_{1};{+/-}(1260)pi;{0})xB(a_{1};{+/-}(1260)-->pi;{-}pi;{+}pi;{+/-})=(13.2+/-2.7+/-2.1)x10;{-6} with a significance of 4.2sigma, and the branching fraction B(B;{+/-}-->a_{1};{0}(1260)pi;{+/-})xB(a_{1};{0}(1260)-->pi;{-}pi;{+}pi;{0})=(20.4+/-4.7+/-3.4)x10;{-6} with a significance of 3.8sigma, where the first error quoted is statistical and the second is systematic.     

Study of X(5568) in a unitary coupled-channel approximation of BK and B_sπ

The potential of the B meson and the pseudoscalar meson is constructed up to the next-to-leading order Lagrangian, and then the BK and B_sπ interaction is studied in the unitary coupled-channel approximation. A resonant state with a mass about 5568 MeV and J~P= 0~+is generated dynamically, which can be associated with the X(5568) state announced by the D0 Collaboration recently. The mass and the decay width of this resonant state depend on the regularization scale in the dimensional regularization scheme, or the maximum momentum in the momentum cutoff regularization scheme. The scattering amplitude of the vector B meson and the pseudoscalar meson is calculated, and an axial-vector state with a mass near 5620 MeV and J~P= 1~+is produced. Their partners in the charm sector are also discussed.     

Three-Body Amplitudes of the Process a2(1320) → π+π+π-

We analyze the decay amplitudes of the process a₂(1320) → π⁺π⁺π^- using the tensor analysis technique and show how to obtain three-body amplitudes. The derived amplitudes can describe both the resonance and the background contribution of the process.     

Measurements of CP-violating asymmetries in B0-->a1+/-(1260)pi-/+ decays

We present measurements of CP-violating asymmetries in the decay B(0)-->a(1)(+/-)(1260)pi(-/+) with a(1)(+/-)(1260)-->pi(-/+)pi(+/-)pi(+/-). The data sample corresponds to 384x10(6) BB[over ] pairs collected with the BABAR detector at the PEP-II asymmetric B factory at SLAC. We measure the CP-violating asymmetry A(CP)(a(1)pi)=-0.07+/-0.07+/-0.02, the mixing-induced CP violation parameter S(a(1)pi)=0.37+/-0.21+/-0.07, the direct CP violation parameter C(a(1)pi)=-0.10+/-0.15+/-0.09, and the parameters DeltaC(a(1)pi)=0.26+/-0.15+/-0.07 and DeltaS(a(1)pi)=-0.14+/-0.21+/-0.06. From these measured quantities we determine the angle alpha(eff)=78.6 degrees +/-7.3 degrees.     

Pure annihilation decays of B_s~0→a_0~+a_0~- and B_d~0→K_0~(*+)K_0~(*-) in the PQCD approach

We study the CP-averaged branching fractions and the CP-violating asymmetries in the pure annihilation decays ofB _s~0→a_0~+a _0~-andB _d~0→K_0~(*+)K_0~(*-),where a_0[K_0~*]denotes the scalar a_0(980) and a_0(1450)[K_0~*(800)(ork)and K_0~*(1430)],with the perturbative QCD factorization approach under the assumption of two-quark structure for the a_0and K_0~*states.The numerical results show that the branching ratios of theB _d~0→K_0~(*+)K_0~(*-)decays are in the order of 10~(-6),while the decay rates of theB_s~0→a_0~+a _0~-modes are in the order of 10~(-5).In light of the measured modes with the same quark components in the pseudoscalar sector,namely,B _d~0→K~+K~-and B_s~0→p p~(+-),the predictions for the considered decay modes in this work are expected to be measured at the Large Hadron Collider beauty and/or Belle-Ⅱ experiments in the (near) future.Meanwhile,it is of great interest to find that the twist-3 distribution amplitudes φ~S and φ~T with inclusion of the Gegenbauer polynomials for the scalar a_0(1450) and K_0~*(1430)states in scenario2 contribute slightly to the branching ratios while significantly to the CP violations in the B_d~0→K_0~*(14 30)~+K_0*(14 30)~-and B_s~0→a_0(1450)~+a_0(1450)~-decays,which indicates that,compared to the asymptotic φ~Sand φ~T,these Gegenbauer polynomials could change the strong phases evidently in these pure annihilation decay channels.These predictions await for the future confirmation experimentally,which could further provide useful information to help explore the inner structure of the scalars and shed light on the annihilation decay mechanism.     

Multichannel calculation of the very narrow D<Subscript>s0</Subscript><Superscript>*</Superscript>(2317) and the very broad D<Subscript>0</Subscript><Superscript>*</Superscript>(2300-2400)

The narrow D _s0 ^* (2317) and broad D ₀ ^* (2300-2400) charmed scalar mesons and their radial excitations are described in a coupled-channel quark model that also reproduces the properties of the light scalar nonet. All two-meson channels containing ground-state pseudoscalars and vectors are included. The parameters are chosen fixed at published values, except for the overall coupling constant λ, which is fine-tuned to reproduce the D _s0 ^* (2317) mass, and a damping constant α for subthreshold contributions. Variations of λ and D ₀ ^* (2300-2400) pole postions are studied for different α values. Calculated cross-sections for S-wave DK and Dπ scattering, as well as resonance pole positions, are given for the value of α that fits the light scalars. The thus predicted radially excited state D _s0 ^*′(2850), with a width of about 50MeV, seems to have been observed already.     

Role of final states in photoemission from Al(1 1 1)

Enhancement of surface state peaks in angle resolved ultraviolet photoelectron spectra (ARUPS) from the Al(1 1 1) surface is studied experimentally and theoretically within the one-step model of photoemission. The resonant enhancement of the surface state emission is explained by the crucial role of elastic scattering of the outgoing electron. Dipole transitions to evanescent states in the final bands of the crystal are shown to determine photoemission at the resonant photon energy. The band structure based explanation is confirmed by the measurements of electron reflectivity and of the fine structure of valence band spectra. The surface sensitivity of ARUPS is shown to depend strongly on the complex band structure of the crystal and to be finely tunable by the choice of photoemitted electron energy.     

The growth and structure of titanium dioxide films on a Re(1 0 −1 0) surface: Rutile(0 1 1)-(2 × 1)

Titanium dioxide films were grown on Re(1 0 −1 0) by Ti vapor deposition in oxygen at T = 830 K and studied by means of low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), low-energy ion scattering (LEIS) and X-ray diffraction (XRD). The Ti oxide stoichiometry was determined by XPS as Ti:O = 1:2, with the Ti oxidation state (4+). The TiO₂ growth was monitored by means of LEED as a function of film thickness. Extending the coverage from the submonolayer into the multilayer regime gives rise to a p(2 × 2) pattern, a (poorly ordered) (1 × 1), and, finally, a stable (2 × 2) structure, the latter being associated with a homogeneous TiO₂ phase. For normal electron incidence, the (2 × 2) LEED pattern exhibits systematically extinguished beams at (n ± 1/2, 0) positions, indicating a glide mirror plane. The pg(2 × 2) structure could be explained by both a rutile(0 1 1)-(2 × 1) reconstructed surface and a bulk truncated brookite(0 0 1) surface. Faceting phenomena, i.e. running LEED spots, observed with thin TiO₂ films point to the formation of a rutile(0 1 1)-(2 × 1) surface with two domains and {0 1 1}-(2 × 1) facets and rule out the brookite alternative. Confirmation of this assignment was obtained by an XRD analysis performed at the Berlin synchrotron facility BESSY.     

Observation of the π(1800) and (1880) mesons in decay

A partial-wave analysis of the reaction π⁻p→ηηπ⁻p at 18 GeV/c has been performed on a data sample of approximately 4000 events obtained by Brookhaven experiment E852. The J^PC=0⁻⁺π(1800) state is observed in the a₀(980)η and f₀(1500)π decay modes. It has a mass of 1876±18±16 MeV/c² and a width of 221±26±38 MeV/c². The J^PC=2⁻⁺π₂(1880) meson is observed decaying through a₂(1320)η. It has a mass of 1929±24±18 MeV/c² and a width of 323±87±43 MeV/c². Both states are potential candidates for non-exotic hybrid mesons.     

The adsorption of methylcyclopentane on Pt(1 1 1)

The adsorption of methylcyclopentane (MCP) on Pt(1 1 1) has been studied using the atom superposition and electron delocalization (ASED-MO) molecular orbital method. Results show a weak interaction with the metallic surface. The adsorption energy is rather independent of the adsorption site coordination number. We find that Pt 6s, 6p_z and 5d_z² orbitals are involved in the bonding with MCP. There is no bonding between the carbon ring and the Pt surface and the interaction comes from the hydrogen atoms to the surface.     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

Formation of linear structures of Sr and Gd films on the Mo(1 1 2) and W(1 1 2) surfaces

At low coverages, alkaline earth and rare earth layers adsorbed on furrowed transition metal surfaces--such as W(1 1 2) and Mo(1 1 2)--tend to form commensurate linear structures built of monoatomic chains directed across the furrows. Presented Monte Carlo simulations provide insight into parameters of the long-range indirect interaction that, in competition with a dipole-dipole interaction, leads to formation of the linear structures. The most impressive result of the simulations is the revealed repulsive effective interaction between adjacent atoms in linear Sr chains on W(1 1 2) surface. In this case, formation of the linear chains is accomplished due to pronounced minima in the potential of indirect interaction along the surface furrows. This result predicts that a single Sr chain cannot exist on the W(1 1 2) surface.     

Soft X-ray appearance potential spectroscopy (SXAPS) study of TiO2(1 1 0)-1 × 2 and (0 0 1)-1 × 1 surfaces

A soft X-ray appearance potential spectroscopy (SXAPS) apparatus with high sensitivity was built to measure non-derivative spectra. SXAPS spectra (non-derivative) of Ti 2p and O 1s for TiO₂(1 1 0)-1 × 2 and (0 0 1)-1 × 1 surfaces have been measured using low incident currents (about 10 μA/cm²) and a photon counting mode. Density of empty states on Ti and O sites are deduced by self-deconvoluting the spectra. The self-deconvoluted SXAPS spectra are qualitatively similar to those measured by X-ray absorption spectroscopy (XAS). The Ti 2p_3/2 spectrum shows two strong peaks which correspond to t_2g and e_g states. For the O 1s spectrum two strong peaks near the threshold are also found which can be ascribed to O 2pπ and O 2pσ states. These results suggest that the spectra almost obey the dipole selection rule, so-called the “approximate dipole selection rule”. The SXAPS spectra of Ti 2p and O 1s for the (1 1 0) and (0 0 1) surfaces resemble qualitatively, which is consistent with the XAS results. The spectra measured on the (1 1 0)-1 × 2 surface at an incident angle of 45° off normal to the surface and on the (1 1 0) surface sputtered by Ar ions indicate that SXAPS is very sensitive to the surface electronic states.     

Semileptonic Decays of B_s~(**) Mesons into D_(s1) and D_(s2)~* in HQET

In the framework of the heavy quark effective theory,the leading order Isgur-Wise functions relevant to semileptonic decays of the orbitally P-wave excited B s meson states B**s,including the newly found narrow B s1(5830) and B**s2(5840) states,into the(D s1(2536),D*s2(2573)) doublet are calculated from QCD sum rules.With these universal form factors,the decay rates and branching ratios are also estimated.     

First-principles study of adsorption and diffusion on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces

Using first-principles total-energy calculations, we have investigated the adsorption and diffusion of Si and Ge adatoms on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces. The dimer vacancy lines on Ge/Si(0 0 1)-(2 × 8) and the alternate S_A and rebonded S_B steps on Ge/Si(1 0 5)-(1 × 2) are found to strongly influence the adatom kinetics. On Ge/Si(0 0 1)-(2 × 8) surface, the fast diffusion path is found to be along the dimer vacancy line (DVL), reversing the diffusion anisotropy on Si(0 0 1). Also, there exists a repulsion between the adatom and the DVL, which is expected to increase the adatom density and hence island nucleation rate in between the DVLs. On Ge/Si(1 0 5)-(1 × 2) surface, the overall diffusion barrier of Si(Ge) along direction is relative fast with a barrier of ∼0.83(0.61) eV, despite of the large surface undulation. This indicates that the adatoms can rapidly diffuse up and down the (1 0 5)-faceted Ge hut island. The diffusion is also almost isotropic along [0 1 0] and directions.     

SiO adsorption on a p(2 × 2) reconstructed Si(1 0 0) surface

We have investigated the adsorption mechanism of SiO molecule incident on a clean Si(1 0 0) p(2 × 2) reconstructed surface using density functional theory based methods. Stable adsorption geometries of SiO on Si surface, as well as their corresponding activation and adsorption energies are identified. We found that the SiO molecule is adsorbed on the Si(1 0 0) surface with almost no activation energy. An adsorption configuration where the SiO binds on the channel separating the dimer rows, forming a Si-O-Si bridge on the surface, is the energetically most favourable geometry found. A substantial red-shift in the calculated vibrational frequencies of the adsorbed SiO molecule in the bridging configurations is observed. Comparison of adsorption energies shows that SiO adsorption on a Si(1 0 0) surface is energetically less favourable than the comparable O₂ adsorption. However, the role of SiO in the growth of silicon sub-oxides during reactive magnetron plasma deposition is expected to be significant due to the relatively large amount of SiO molecules incident on the deposition surface and its considerable sticking probability. The stable adsorption geometries found here exhibit structural properties similar to the Si/SiO₂ interface and may be used for studying SiO_x growth.     

para-Sexiphenyl thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O surfaces

We present a reflectance difference spectroscopy (RDS) study of para-sexiphenyl (p-6P) thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O substrates. The RDS spectra show pronounced anisotropies for p-6P films formed on both substrates at room temperature, demonstrating that the molecules are uniaxially aligned within the films. Based on the RD spectra and the evolution of the optical transitions with p-6P coverage the growth mode on both substrates could be identified. From the dominating RDS feature, assigned to the lowest energy HOMO-LUMO transition, the orientation of the molecular chain can be determined. On Cu(1 1 0), the p-6P molecular chains align in the direction, i.e., along the Cu atomic rows, whereas on the Cu(1 1 0)-(2 × 1)O surface, the molecules are oriented in the orthogonal [0 0 1] direction, i.e., along the “added” Cu-O rows of the Cu(1 1 0)-(2 × 1)O surface. The energetic position and line shape of the main RDS feature differs for the two substrates and varies with p-6P coverage. This fine structure is discussed in terms of different molecular conformations, adlayer structure and vibronic replicas.