Mechanism of Lithium and Cobalt Recovery from Spent Lithium-ion Batteries by Sulfation Roasting Process

Different from the traditional pyrometallurgical recovery process of Li and Co from spent lithium-ion batteries, a new recovery method for Li and Co was established by converting LiCoO₂ into water-soluble metal sulfates by roasting a mixture of LiCoO₂ and NaHSO₄·H₂O. The evolution law of the mixture with increased roasting temperature was investigated by thermogravimetry-differential scanning calorimetry(TG-DSC), in situ X-ray diffraction(XRD), XRD, and X-ray photoelectron spectroscopy(XPS). The results show that the phase transition of LiCoO₂ mixed with NaHSO₄·H₂O with increased temperature proceeded as follows:LiCoO₂, NaHSO₄·H₂O→LiCoO₂, NaHSO₄→Li_1-xCoO₂, LiNaSO₄, Na₂S₂O₇, Na₂SO₄→Li_1-xCoO₂, Co₃O₄, LiNaSO₄, Na₂SO₄→Co₃O₄, LiNaSO₄. The reaction mechanism of this roasting process may be as follows:LiCoO₂+NaHSO₄·H₂O→1/2Li₂SO₄+ 1/2Na₂SO₄+1/3Co₃O₄+1/12O₂+3/2H₂O, Li₂SO₄+Na₂SO₄=2LiNaSO₄.     

铈源对甲醇水蒸气重整制氢CuO/CeO2催化剂的影响

采用沉淀法合成了CeO_2载体,再经浸渍法负载活性组分得到CuO/CeO_2催化材料,探究了铈源(Ce(NO_3)_3·6H_2O、Ce Cl_3·6H_2O、Ce(NH_4)_2(NO_3)_6、Ce(SO_4)_2·4H_2O)对CuO/CeO_2催化性能的影响。通过采用XRD、SEM、N_2O滴定、BET和H_2-TPR等表征手段对催化材料的结构和性质研究发现,四种铈源合成的CuO/CeO_2催化材料在Cu比表面积、还原性能以及活性组分和载体间的相互作用方面存在着明显差别。其中,由Ce(NO_3)_3·6H_2O合成的CuO/CeO_2催化材料的Cu比表面积较大,CuO还原温度较低,CeO_2载体与CuO之间相互作用较强,在甲醇水蒸气重整反应过程中,表现出较佳的催化活性,在反应温度为553 K,水醇比n(H_2O)/n(MeOH)为1.2,甲醇水蒸气气体空速(GHSV)为1760 h~(-1)时,甲醇的转化率为100%,重整气中CO摩尔含量为0.84%。     

Synthesis,Structure and Characterization of Three Metal Molybdate Hydrates: Fe(H2O)2(MoO4)2·H3O,NaCo2(MoO4)2(H3O2)and Mn2(MoO4)3·2H3O

Three metal molybdate hydrates,Fe(H2O)2(MoO4)2·H3O(FeMo),NaCo2(MoO4)2(H3O2)(CoMo)and Mn2(MoO4)3·2H3O(MnMo),were synthesized by the mixed-solvent-thermal methods and characterized by singlecrystal X-ray...     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.     

固相配位化学反应研究(LXVII)─固－固相反应合成混配化合物

室温或近室温条件下,Co(acac)₂(H₂O)₂与第二配体2,2'-联吡啶、1,10-啡啰啉、8-羟基喹啉、水杨醛肟固相反应得到4个混配化合物,经XRD、IR、UV及元素分析表征了这些产物。     

Synthesis and Structure of Hetropolyoxometal-supported Transition Metal Complexes

The chemistry of metal-oxo compounds has been extensively and intensively studied for over a hundred years because of their theoritical importance and practical application^[1]. Recent advance has afforded a study of inorganic or organometallic complexes containing metal-oxo anions^[2]. Herein, the synthesis and structural characterization of two heteropolyoxomolybdnum-supported transition metal complexes (H₂bpy)_0.5Ni(H₂O)₅[Mo₅P₂O₂₃]Ni(Hbpy)(H₂O)₄ (1) and (H₂bpy)_0.5Co(H₂O)₅[Mo₅P₂O₂₃]Co(Hbpy) (H₂O)₄(2) are reported.     

铝源对Ni/Al2 O3催化剂结构及其CO2-CH4重整性能的影响

以三种不同铝源采用溶液燃烧法制备了系列Ni/Al_2O_3催化剂,通过XRD、H_2-TPR、NH_3-TPD、N_2吸附-脱附、TGDTG和TPH等分析方法对反应前后催化剂进行了表征,研究了铝源对Ni/Al_2O_3催化剂结构、表面性质及其CO_2-CH_4重整性能的影响。结果表明,以Al(NO_3)_3·9H_2O为铝源制备的NiNO-AlNO催化剂比表面积较大,达102 m~2/g;高温还原峰面积大,峰型更为弥散;且载体Al_2_O_3具有一定的结晶性。而以Al_2(SO_4)_3·18H_2O和AlCl_3·6H_2O为铝源制备的NiNO-AlSO和NiNO-AlCl催化剂,其载体以无定型Al_2O_3存在,活性组分Ni晶粒粒径大、分散性差,还原峰面积较小,与载体的相互作用较弱。其中,由于硫酸铝较为稳定,需要在更高温度下才能转化为Al_2O_3,且所制备NiNO-AlSO催化剂中残留有含硫物质,使得其表面酸性较强。评价结果显示,NiNO-AlNO催化剂活性较高,稳定性好,CH4转化率为31.21%,CO_2转化率为48.97%。积炭分析结果发现,NiNO-AlNO催化剂表面积炭量最少,沉积炭主要以无定型态存在,具有良好的抗积炭性能。     

A Novel Ferroferric Polyoxotungstate:Synthesis,Structure and Magnetic Properties of Na5[Fe2.5(H2O)10W12O42]·ca.32 H2O

Due to the variety of their components, structures and properties, significant attention continues to be focused on the polyoxometalatic anions in many research fields such as catalysis, biology, medicine and materials science¹. When the aqueous solution of Na₂WO₄·2H₂O was reduced by iron powder in CH₃COOH (30%), crystals of Na₅[Fe_2.5(H₂O)₁₀W₁₂O₄₂]·ca.32 H₂O 1, which crystallizes in the triclinic space group P 1 with a=12.121(2), b=12.426(3), c=l3.247(3) Å, α=68.33(3), β=71.33(3), γ=71.44(3)° and Z=l, precipitated after several weeks.     

稀土冠醚类络合物的研究(Ⅲ)——硝酸钪与邻苯二酮-17-冠-5及邻苯二酮-14-冠-4固态络合物的合成与性质

制得硝酸钪与两种冠醚的固态络合物,确定其组成为Sc(NO₃)₃·C₁₆H₂₀O₇·H₂O及Sc(NO₃)₃·C₁₄H₁₆O₆·H₂O。研究了冠醚本身及其钪的相应络合物的合成及有关性质。     

Preparation and x-ray diffraction characterization of the kambaldaite-like sodium cobalt carbonate hydroxide hydrate, Na2Co8(CO3)6(OH)6·6H2O

A new sodium cobalt carbonate hydroxide hydrate, Na₂Co₈(CO₃)₆(OH)₆·6H₂O, has been prepared at room temperature by treatment of Co(OH)NO₃·H₂O with a concentrated aqueous solution of NaHCO₃. X-Ray powder diffractometry and the results of the chemical analyses show that the compound is isotypical to Na₂Ni₈(CO₃)₆(OH)₆·6H₂O —kambaldaite, a unique mineral with no known synthetic or natural analogues.     

The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

One Dimensional Iron Molybdophosphate Anionic Chains with Different Structural Arrangements Reflecting a Flexibility Character

Structural comparison of a new compound[(bpp)₃H₆]Fe₂^IIIFe₂^IIMo₂₄^V(H₂PO₄)₈(HPO₄)₄(PO₄)₄O₄₈(OH)₁₂· (H₂O)₄·2H₂O(1)[bpp=1,3-di(4-pyridyl)propane] with our previously reported two compounds[(bpy)₃Fe^II]₃· Fe₂^IIIFe₂^IIMo₂₄^V(H₂PO₄)₈(HPO₄)₄(PO₄)₄O₄₈(OH)₁₂(H₂O)₄·12H₂O(2) and[(bpy)₃Fe^II]₂Fe^IIFe^IIIMo₁₂^V(H₂PO₄)₂(H_2-xPO₄)·(H_1+xPO₄)(HPO₄)₂(PO₄)₂O₂₄(OH)₆(H₂O)₂·9H₂O(x=0―1)(3)(bpy=2,2'-bipyridine), which all exhibit one-dimensional mixed-valence iron molybdophosphate anionic chains constructed by alternating connection of Fe^III ions and magic[Fe^II(Mo₆P₄O₃₁)₂] units, reveals that the non-hydrogen atomic ratios of Mo:Fe:P:O within the polymeric anionic chains are the same for all the three compounds, while the polymeric anionic chains of the different compounds bear different numbers of negative charges. And therefore there exist different numbers of counter cations per {Fe₂^III[Fe₂^II(P₁₆Mo₂₄^VO₁₂₄)]} unit found in the titled compounds. It discloses that not only are the spatial assembling of counter cations and polymeric inorganic chains of three compounds quite different, but also the O―Fe^III―O bond angles and Fe^III―O bond lengths of the three different inorganic chains exhibit small differences. What is more important is that such small changes in bond length and bond angle in the assemblage of Fe^III―O bonds lead to the considerable fluctuations of inorganic chains in their structural conformation within the three compounds, reflecting an interesting phenomenon of “flexibility" in the pure inorganic one dimensional mixed-valence iron molybdophosphate chains.     

高氯酸铕的双亚砜配合物研究

本文报告了高氯酸铕的高、低熔点双(正-辛基亚砜)乙烷和双(苯基亚砜)乙烷的四个配合物:Eu(ClO₄)₃(α-BOSE)₃·2H₂O(Ⅰ)、Eu(ClO₄)₃(β-BOSE)₄·2H₂O(Ⅱ)、Eu(ClO₄)₃(α-BPhSE)₃(Ⅲ)和Eu(ClO₄)₃(β-BPhSE)₄·2H₂O(Ⅳ)的合成及性质。     

三元体系MgCl2-CO(NH2)2-H2O在25℃时的等温溶度与新相研究

测定了25℃时三元体系MgCl₂-CO(NH₂)₂-H₂O的等温溶度及饱和溶液的折光率和密度,且绘制成溶度图和性质-组成图.在三元体系内形成2个三元化合物新相:MgCl₂·CO(NH₂)₂·4H₂O(记作A)和Mgcl₂·4CO(NH₂)₂·2H₂O(记作B),B为新化合物.三元体系的溶度图由4支单饱和线[对应单饱和固相为MgCl₂·6H₂O、三元化合物A和B、CO(NH₂)₂]组成,这4支单饱和线两两交于3个三元无变点[对应双饱和固相为MgCl₂·6H₂O+A、A+B、B+CO(NH₂)₂].     

Structural tuning of coordination polymers by 4-connecting metal node and secondary building process

Due to variation in ligand's conformation, metal node's connecting geometry, and secondary building process by anions, bat-like, dumbell-like, diamondoid, or pillar-layer topologies are achieved.     

新晶态磷酸铝分子筛CFAP-6的合成与性质

磷酸铝分子筛是新的一类晶态无机材料.1982年美国联合碳化物公司首次公布了约廿种不同结构的磷酸铝分子筛的合成专利^[1],作者在研究P₂O₅-Al₂O₃-H₂O系统的水热合成中^[2],发现用Al₂(SO₄)₃溶液作为Al₂O₃源,固体(NH₄)₃PO₄·3H₂O作为P₂O₅源,加入适量的有机胺,也能合成分子筛相,新晶态分子筛CFAP-6就是用上述原料,在二正丁胺-(NH₄)₂O-P₂O₅-Al₂O₃-H₂O系统中水热合成的。     

Structural Characterization and Luminescence Properties of Two 4d-4fLn-Ag Coordination Compounds Based on Dinuclear Lanthanide Clusters

Two new compounds,[ErAg（INA）2（C2O4）]·2H2O（1）（HINA=nicotinic acid） and [Tb0.8Y0.2Ag2（IN）4·（H2O）5]·NO3·2H2O（2）（HIN=isonicotinic acid）,based on the {Ln2} building units,have been hydrothermally synthesized and characterized by single-crystal X-ray diffraction,infrared spectroscopy,thermal analysis and powder X-ray diffraction（PXRD）.Single-crystal X-ray diffraction data reveal that both compounds crystallized in the low-symmetry triclinic space group P1-.Compound 1 is a 3D heterometallic coordination framework based on {Er2}clusters,oxalate ligands and bridging [Ag（INA）] linkers,while compound 2 consists of 0D [Tb0.8·Y0.2Ag2（IN）4（H2O）5]2 subunits that give a 3D supramolecular structure through hydrogen bond interaction.The photoluminescent properties of both compounds（1 and 2） were studied.     

新型磷-钒-氧层状化合物[H2en]2[H3O]6[Co(H2O)2(VO)8(OH)4(PO4)8]的水热合成与晶体结构

金属磷酸盐材料在吸附、离子交换、离子传导和催化剂方面有潜在的应用前景[1～5]. 近年来, 通过水热反应合成了一些A-V-P-O化合物. 在这些化合物中, A一般为碱金属或有机阳离子, 如层状结构的[H2N(C4H8)2NH2][(VO)4(OH)4(PO4)2][6] 和[H2N(C2H4)3NH2][(VO)8(HPO4)3(PO4)4*(OH)2]*2H2O[6], 一维链状结构的 [H2NCH2CH2NH3(VO)(PO4)][7], 手性双螺旋结构的 [(CH3)2NH2]K4[(VO)10(H2O)2(OH)4(PO4)7]*H2O[8]以及具有三维骨架结构的化合物 [H3N(CH2)3NH3K(VO)3(PO4)3][9], [H3N(CH2)3NH3]2[V(H2O)2(VO)6(OH)2(HPO4)3(PO4)5]*3H2O[10]和[H3N(CH2)2NH3][(VO)3(H2O)2(PO4)2(HPO4)4][11].     

Nd(Gly)2Cl3·3H2O和Pr(Ala)3Cl3·3H2O的热力学性质

利用精密自动绝热热量计测定了Nd(Gly)₂Cl₃·3H₂O在80-357K和Pr(Ala)₃Cl₃·3H₂O在80-374K温区的热容. 根据两个化合物的热容计算出了相对于参考温度298.15K的热力学函数(H_T?H_298.15)和(S_T?S_298.15). 根据热重(TG)分析结果, 提出了这两个稀土化合物可能的热分解机理. 利用溶解-反应恒温热量计测定相关化合物的溶解焓并设计盖斯热化学循环, 计算出了两个化合物的标准摩尔生成焓.     

Noncentrosymmetric K2Mn3(SO4)3F2·4H2O and Rb2Mn3(SO4)3F2·2H2O with pseudo-KTP structures

Two fluoride sulfates,K₂Mn₃(SO₄)₃F₂·4H₂O(Ⅰ) and Rb₂Mn₃(SO₄)₃F₂·2H₂O (Ⅱ) are obtained by water solution method.Single-crystal X-ray diffraction analysis indicated that they crystallize in space groups of Cmc2_1.Their structures feature a pseudo-KTP structure consisting of interconnecting[Mn₃(SO₄)3F₂(H₂O)2]_∞ layers,which are further packing along the a axis with alkali metal cations balancing the charges.The structure relationships between the two compounds are discussed.Secondharmonic generation measurements manifest that Ⅰ and Ⅱ have similar second-harmonic generation responses of about 0.2 and 0.25 times that of KH₂PO₄.