Quantum-chemical Investigations of Structures and Stabilities of Ethynyl-or Ethenyl-expanded [n]-Prismanes

Quantum-chemical calculations on some derivatives of [n]-prismanes expanded by ethynyl or ethenyl groups have been performed using density functional theory (DFT) method.Their geometric structures,electronic structures,vertical ionization potentials and vertical electron affinities have been obtained at the B3LYP/6-31G** level of theory.Meanwhile,the total strain energy has been investigated in detail and compared with [n]-prismane and other derivatives.The present paper has also computed the enthalpies of formation for different isomers so as to evaluate their thermal stabilities.     

Electronic polarization reversal and excited state intramolecular charge transfer in donor/acceptor ethynylpyrenes

An attempt to tune the electronic properties of pyrene (Py) by coupling it with a strong electron donor (-PhNMe2, DMA)/acceptor (anthronitrile, AN) through an ethynyl bridge has been undertaken. A moderate electron donor (iPrOPh-, IPP)/acceptor (2-quinolinyl, 2Q) has also been incorporated, and all four molecules were studied with reference to a neutral molecule, namely, 1-phenylethynylpyrene (PhEPy). All the arylethynylpyrenes (ArEPy's) have been thoroughly characterized, and their electronic properties were studied by absorption and emission spectral properties of these ArEPy's. The electrochemical characteristics were also studied for arriving at the electrochemical band gap which has been compared with the HOMO-LUMO energy gap derived from the photophysical measurements and theoretical calculations performed by density functional theory (DFT) using B3LYP/6-31G basis sets. The results obtained from experimental and theoretical studies are critically discussed.     

C6F5X＋（X=Cl,Br,I,CH3）离子的理论研究

用DFT B3LYP方法及6-311G（d,p）,6-311＋G（d,p）和LanL2dz基组,对C6F5X＋（X=Cl,Br,I,CH3）阳离子做了理论研究,优化了它们的电子基态的构型,计算了对应分子的垂直电离势（VIP）和绝热电离势（AIP）.结果表明四种离子的构型的对称点群和对应分子相同,但构型参数有明显差别.B...     

Accurate prediction of vertical electronic transitions of Ni(II) coordination compounds via time dependent density functional theory

Time dependent density functional theory calculations are completed for five Ni(II) complexes formed by polydentate peptides to predict the electronic absorption spectrum. The ligands examined were glycyl‐glycyl‐glycine (GGG), glycyl‐glycyl‐glycyl‐glycine (GGGG), glycyl‐glycyl‐histidine (GGH), glycyl‐glycyl‐cysteine (GGC), and triethylenetetramine (trien). Fifteen functionals and two basis sets were tested. On the basis of the mean absolute percent deviation (MAPD), the ranking among the functionals is: HSE06 ∼ MPW1PW91 ∼ PBE0 > ω‐B97x‐D ∼ B3P86 ∼ B3LYP ∼ CAM‐B3LYP > PBE ∼ BLYP ∼ BP86 > TPSS > TPSSh > BHandHLYP > M06 ≫ M06‐2X. Concerning the basis sets, the triple‐ζ def2‐TZVP performs better than the double‐ζ LANL2DZ. With the functional HSE06 and basis set def2‐TZVP the MAPD with respect to the experimental λ_max is 1.65% with a standard deviation of 1.26%. The absorption electronic spectra were interpreted in terms of vertical excitations between occupied and virtual MOs based on Ni‐d atomic orbitals. The electronic structure of the Ni(II) species is also discussed.     

Structure and Properties of Semiconductor Microclusters GanPn（n=1-4）： A First Principle Study

The possible geometrical structures and relative stabilities of semiconductor microclusters Ga.P.(n=1-4) were studied by virtue of density functional calculations with generalized gradient approximation(B3LYP). For the most stable isomers of Ga,,P.(n=1-4) clusters, the electronic structure, vibrational properties. dipole moment, polarizability and ionization potential were analyzed by means of HF. MP2. CISD and B3L YP methods with different basis sets.     

氟代乙烯阳离子的理论研究

用B3LYP和MP2方法及6-31G(d, p)、6-31＋G(d, p)、6-311G(d, p)和6-311＋G(d, p) 基组，对六种氟代乙烯阳离子做了理论研究，优化了它们的基电子态的结构，计算了对应分子的垂直电离势（VIP）和绝热电离势(AIP).结果表明，与具有非平面结构的乙烯阳离子不同，六种氟代乙烯阳离子都只具有平面结构；与分子结构相比，离子结构的C－C键增长， C－F键缩短， CCF键角变小. 自然布居分析计算表明，这些离子的正电荷主要分布在与F原子相连的C原子和各H原子上. B3LYP/6-311＋G(d, p) 级别上计算的各分子的VIP和AIP值和实验值符合得很好. 使用含弥散基函数的基集可以明显提高这类分子的电离势的计算精度.     

Density functional theory calculations of the lowest energy quintet and triplet states of model hemes: role of functional, basis set, and zero-point energy corrections

We investigated the effect of several computational variables, including the choice of the basis set, application of symmetry constraints, and zero-point energy (ZPE) corrections, on the structural parameters and predicted ground electronic state of model 5-coordinate hemes (iron(II) porphines axially coordinated by a single imidazole or 2-methylimidazole). We studied the performance of B3LYP and B3PW91 with eight Pople-style basis sets (up to 6-311+G*) and B97-1, OLYP, and TPSS functionals with 6-31G and 6-31G* basis sets. Only hybrid functionals B3LYP, B3PW91, and B97-1 reproduced the quintet ground state of the model hemes. With a given functional, the choice of the basis set caused up to 2.7 kcal/mol variation of the quintet-triplet electronic energy gap (DeltaEel), in several cases, resulting in the inversion of the sign of DeltaEel. Single-point energy calculations with triple-zeta basis sets of the Pople (up to 6-311G++(2d,2p)), Ahlrichs (TZVP and TZVPP), and Dunning (cc-pVTZ) families showed the same trend. The zero-point energy of the quintet state was approximately 1 kcal/mol lower than that of the triplet, and accounting for ZPE corrections was crucial for establishing the ground state if the electronic energy of the triplet state was approximately 1 kcal/mol less than that of the quintet. Within a given model chemistry, effects of symmetry constraints and of a "tense" structure of the iron porphine fragment coordinated to 2-methylimidazole on DeltaEel were limited to 0.3 kcal/mol. For both model hemes the best agreement with crystallographic structural data was achieved with small 6-31G and 6-31G* basis sets. Deviation of the computed frequency of the Fe-Im stretching mode from the experimental value with the basis set decreased in the order: nonaugmented basis sets, basis sets with polarization functions, and basis sets with polarization and diffuse functions. Contraction of Pople-style basis sets (double-zeta or triple-zeta) affected the results insignificantly for iron(II) porphyrin coordinated with imidazole. Poor performance of a "locally dense" basis set with a large number of basis functions on the Fe center was observed in calculation of quintet-triplet gaps. Our results lead to a series of suggestions for density functional theory calculations of quintet-triplet energy gaps in ferrohemes with a single axial imidazole; these suggestions are potentially applicable for other transition-metal complexes.     

Vibrational spectroscopy [FTIR and FTRaman] investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 4-chloro 2-methylaniline using HF and DFT [LSDA, B3LYP and B3PW91] calculations

In the present study, the FT-IR and FT-Raman spectra of 4-chloro-2-methylaniline (4CH2MA) have been recorded in the range of 4000-100 cm(-1). The fundamental modes of vibrational frequencies of 4CH2MA are assigned. All the geometrical parameters have been calculated by HF and DFT (LSDA, B3LYP and B3PW91) methods with 6-31G (d, p) and 6-311G (d, p) basis sets. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values for aniline and some substituted aniline. The harmonic and anharmonic vibrational wavenumbers, IR intensities and Raman activities are calculated at the same theory levels used in geometry optimization. The calculated frequencies are scaled and compared with experimental values. The scaled vibrational frequencies at LSDA/B3LYP/6-311G (d, p) seem to coincide with the experimentally observed values with acceptable deviations. The impact of substitutions on the benzene structure is investigated. The molecular interactions between the substitutions (Cl, CH(3) and NH(2)) are also analyzed.     

Theoretical and Experimental Studies on the Metal Complex of Diethylenetriamino-trioxo-molybdenum(Ⅵ)[MoO3(NH2C2H4NHC2H4NH2)]

For diethylenetriamino-trioxo-molybdenum(VI), density functional theory (DFT) method calculations of the structure, atomic charge distributions, electronic spectra, natural po- pulation analyses and thermodynamic properties at different temperatures have been performed by B3LYP method using LANL2DZ, CEP-121G and CEP-31G basis sets, respectively. The calculated results show that B3LYP/LANL2DZ method can best reproduce the molecular structure. The atomic charge distribution analyses indicate that during forming the complex, the ligand of diethyl- enetriamine donates negative charges to MoO3 and these charges are accepted by molybdenum(VI) atom as well as three oxygen atoms. The electronic spectra calculations indicate that B3LYP/ LANL2DZ results are nearest to experimental data among the three methods and electronic tran- sitions are mainly derived from the contribution of bands π→π*. The calculation of the second order optical nonlinearity was carried out, and the molecular hyperpolarizability was 0.7881*10-30 esu.     

Theoretical and Experimental Studies on the Metal Complex of Diethylenetriamino-trioxo-molybdenum(VI) [MoO_3(NH_2C_2H_4NHC_2H_4NH_2)]

1 INTRODUCTION Molybdenum is a biologically important trace ele- ment that occurs in the redox-active sites of moly- bdoenzymes involving in nitrogen, sulfur or carbon metabolism. The structural chemistry of molybde- num complexes has aroused considerable interest in view of its higher oxidation states to form a number of compounds containing MoO groups, and informa- tion on these is very useful in understanding the behavior of MO groups generally[1~3]. Molybdenum oxide-based solids hav…     

What is the best DFT functional for vibronic calculations? A comparison of the calculated vibronic structure of the S1-S0 transition of phenylacetylene with cavity ringdown band intensities

The sensitivity of vibronic calculations to electronic structure methods and basis sets is explored and compared to accurate relative intensities of the vibrational bands of phenylacetylene in the S(1)(A(1)B(2)) ← S(0)(X(1)A(1)) transition. To provide a better measure of vibrational band intensities, the spectrum was recorded by cavity ringdown absorption spectroscopy up to energies of 2000 cm(-1) above the band origin in a slit jet sample. The sample rotational temperature was estimated to be about 30 K, but the vibrational temperature was higher, permitting the assignment of many vibrational hot bands. The vibronic structure of the electronic transition was simulated using a combination of time-dependent density functional theory (TD-DFT) electronic structure codes, Franck-Condon integral calculations, and a second-order vibronic model developed previously [Johnson, P. M.; Xu, H. F.; Sears, T. J. J. Chem. Phys. 2006, 125, 164331]. The density functional theory (DFT) functionals B3LYP, CAM-B3LYP, and LC-BLYP were explored. The long-range-corrected functionals, CAM-B3LYP and LC-BLYP, produced better values for the equilibrium geometry transition moment, but overemphasized the vibronic coupling for some normal modes, while B3LYP provided better-balanced vibronic coupling but a poor equilibrium transition moment. Enlarging the basis set made very little difference. The cavity ringdown measurements show that earlier intensities derived from resonance-enhanced multiphoton ionization (REMPI) spectra have relative intensity errors.     

High-level ab initio studies of hydrogen abstraction from prototype hydrocarbon systems

Symmetric and nonsymmetric hydrogen abstraction reactions are studied using state-of-the-art ab initio electronic structure methods. Second-order M?ller-Plesset perturbation theory (MP2) and the coupled-cluster singles, doubles, and perturbative triples [CCSD(T)] methods with large correlation consistent basis sets (cc-pVXZ, where X = D,T,Q) are used in determining the transition-state geometries, activation barriers, and thermodynamic properties of several representative hydrogen abstraction reactions. The importance of basis set, electron correlation, and choice of zeroth-order reference wave function in the accurate prediction of activation barriers and reaction enthalpies are also investigated. The ethynyl radical (*CCH), which has a very high affinity for hydrogen atoms, is studied as a prototype hydrogen abstraction agent. Our high-level quantum mechanical computations indicate that hydrogen abstraction using the ethynyl radical has an activation energy of less than 3 kcal mol(-1) for hydrogens bonded to an sp(2) or sp(3) carbon. These low activation barriers further corroborate previous studies suggesting that ethynyl-type radicals would make good tooltips for abstracting hydrogens from diamondoid surfaces during mechanosynthesis. Modeling the diamond C(111) surface with isobutane and treating the ethynyl radical as a tooltip, hydrogen abstraction in this reaction is predicted to be barrierless.     

氰乙基对几种芳胺结构和光谱的影响

采用量子化学中密度泛函理论(DFT)的B3LYP方法分别用6-31G*和6-311+G*基组对苯胺、对氯苯胺和对甲苯胺及其氰乙基衍生物的几何构型进行全优化, 探讨了氨基上氰乙基的引入对分子电荷转移、前线轨道能量和电子光谱等性质的影响规律. 在此基础上采用含时密度泛函方法(TD-DFT)计算了分子第一激发态的电子跃迁能, 得到最大吸收波长λmax. 计算结果表明, 氨基上氰乙基的引入, 对前线分子轨道组成影响虽然小, 但使得最大吸收波长红移, 与实验值λmax有较好的一致性, 发现该类物质主要吸收光谱源于分子内的π→π*的电子跃迁.     

Theoretical Study of the Molecular and Electronic Structures of CPDT-TCNQ and Its Difluoro and Dimethyl Derivatives

1 INTRODUCTION Since the discovery of one-dimensional metallic behavior of tetrathiafulvalene (TTF) with tetracyano- quinodimethane (TCNQ)[1], organic charge-transfer (CT) complexes and CT salts have been intensively studied in search of electrically conducting and superconducting properties[2 ～ 6] which are most unusual for an organic material. The most intriguing property is that it is excellent metal with conducti- vity similar to that of metals at room temperature[7, 8]. In these…     

Vibrational assignments of 2-iodopyridine

A review of the vibrational assignments for 2-iodopyridine has been proposed based on the FT-Raman (3500-50cm(-1)) and IR (4000-400cm(-1)) spectral measurements. Equilibrium geometries and vibrational frequencies have been computed from a variety of electronic structure methods: the ab initio (RHF), six DFT (BLYP, BP86, B3LYP, B3P86, B3PW91 and SVWN) and MP2 methods using 3-21G*, LANL2DZ and DGDZVP basis sets. A normal coordinate analysis has been carried out: the normal modes and their couplings are characterized in terms of potential energy distributions (PEDs). The comparison of assignments for pyridine and halopyridines shows that several of the normal modes arise from coupled vibrations in 2-iodopyridine. The BP86 and B3LYP methods with LANL2DZ basis set have performed reasonably well in reproducing the observed spectra, demonstrating that the LANL2DZ basis set (with effective core potential representations of electrons near the nuclei for post-third row atoms) is suitable for 2-iodopyridine.     

Structural identification of a novel axially chiral binaphthyl fluorene based salen ligand in solution using electronic circular dichroism: a theoretical-experimental analysis

A novel axially chiral binaphthyl fluorene based salen ligand, AFX-155 [2,2'-(1E,1'E)-(R)-1,1'-binaphthyl-2,2'-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(4-((7-(diphenylamino)-9,9-dihexyl-9H-fluoren-2-l)ethynyl)phenol)], with potential applications in homogeneous catalysis, biophotonics, and sensing was synthesized. A full comparative theoretical-experimental analysis of the UV-vis and electronic circular dichroism (ECD) spectra of the 10 primary isomers, comprising stereoisomers and optical isomers, revealed the presence of the unique structure in tetrahydrofuran (THF) solution, the trans-R-intra//trans-R-extra. A proposed route of attack of the (R)-(+)-2,2'-diamino-1,1'-binapthalene onto a salicaldehyde 5-(2-(2-(diphenylamino)-9,9-dihexyl-9H-fluoren-7-yl)ethynyl)-2-hydroxybenzaldehyde followed by a consecutive attack of the resulting species onto another salicaldehyde, both via Burgi:Dunitz trajectory, validates the unambiguous formation of the established isomer. Steric hindrances seem to be the determinant factor that defines the 3D structural conformation of this particular stereoisomer of AFX-155 with triple axial chirality. The determination of every optimal structure and the dominant conformers of AFX-155 were calculated evaluating, in CONFLEX, their steric energies using force fields at MMFF94S (2006-11-24HGTEMP) level in gas phase. The geometry of the conformers was optimized in THF (using PCM) using Gaussian 09 at the DFT/B3LYP level of theory and 6-31G* basis set. The first 100 electronic excited states were calculated using the same level of theory and basis set.     

A comparison of the behavior of functional/basis set combinations for hydrogen-bonding in the water dimer with emphasis on basis set superposition error

We evaluate the performance of ten functionals (B3LYP, M05, M05-2X, M06, M06-2X, B2PLYP, B2PLYPD, X3LYP, B97D, and MPWB1K) in combination with 16 basis sets ranging in complexity from 6-31G(d) to aug-cc-pV5Z for the calculation of the H-bonded water dimer with the goal of defining which combinations of functionals and basis sets provide a combination of economy and accuracy for H-bonded systems. We have compared the results to the best non-density functional theory (non-DFT) molecular orbital (MO) calculations and to experimental results. Several of the smaller basis sets lead to qualitatively incorrect geometries when optimized on a normal potential energy surface (PES). This problem disappears when the optimization is performed on a counterpoise (CP) corrected PES. The calculated interaction energies (ΔEs) with the largest basis sets vary from -4.42 (B97D) to -5.19 (B2PLYPD) kcal/mol for the different functionals. Small basis sets generally predict stronger interactions than the large ones. We found that, because of error compensation, the smaller basis sets gave the best results (in comparison to experimental and high-level non-DFT MO calculations) when combined with a functional that predicts a weak interaction with the largest basis set. As many applications are complex systems and require economical calculations, we suggest the following functional/basis set combinations in order of increasing complexity and cost: (1) D95(d,p) with B3LYP, B97D, M06, or MPWB1k; (2) 6-311G(d,p) with B3LYP; (3) D95++(d,p) with B3LYP, B97D, or MPWB1K; (4) 6-311++G(d,p) with B3LYP or B97D; and (5) aug-cc-pVDZ with M05-2X, M06-2X, or X3LYP.     

Ab initio study of excited state electronic circular dichroism. Two prototype cases: methyl oxirane and R-(+)-1,1'-bi(2-naphthol)

A computational approach to the calculation of excited state electronic circular dichroism (ESECD) spectra of chiral molecules is discussed. Frequency dependent quadratic response theory is employed to compute the rotatory strength for transitions between excited electronic states, by employing both a magnetic gauge dependent and a (velocity-based) magnetic gauge independent approach. Application is made to the lowest excited states of two prototypical chiral molecules, propylene oxide, also known as 1,2-epoxypropane or methyl oxirane, and R-(+)-1,1'-bi(2-naphthol), or BINOL. The dependence of the rotatory strength for transitions between the lowest three excited states of methyl oxirane upon the quality and extension of the basis set is analyzed, by employing a hierarchy of correlation consistent basis sets. Once established that basis sets of at least triple zeta quality, and at least doubly augmented, are sufficient to ensure sufficiently converged results, at least at the Hartree-Fock self-consistent field (HF-SCF) level, the rotatory strengths for all transitions between the lowest excited electronic states of methyl oxirane are computed and analyzed, employing HF-SCF, and density functional theory (DFT) electronic structure models. For DFT, both the popular B3LYP and its recently highly successful CAM-B3LYP extension are exploited. The strong dependence of the spectra upon electron correlation is highlighted. A HF-SCF and DFT study is carried out also for BINOL, a system where excited states show the typical pairing structure arising from the interaction of the two monomeric moieties, and whose conformational changes following photoexcitation were studied recently with via time-resolved CD.     

腺苷酸琥珀酸合成酶与其抑制剂的分子机制研究

利用密度泛函B3LYP方法选择6-31G(d)基组对腺苷酸琥珀酸合成酶(AdSS)天然抑制剂及其衍生物的结构进行优化,并对其稳定性进行了分析,同时采用Mulliken键序、原子电荷分布、表观静电势等对AdSS抑制剂及其衍生物电子结构与其生物活性相关性进行了理论研究.基于腺苷酸琥珀酸合成酶(AdSS)与其底物肌苷单磷酸(IMP)复合物的晶体结构以及获得的天然抑制剂衍生物稳定构象,利用分子对接、分子力学优化及常温分子动力学模拟对AdSS酶与天然抑制剂及其衍生物的相互作用复合物结构进行理论预测.结果表明,AdSS酶的系列抑制剂中磷酸根基团和乙内酰脲(Hydantoin)官能团构成药效团模型,识别过程中范德华相互作用能的贡献大于静电相互作用能.