Efficient synthesis of sterically crowded biaryls by palladium-phosphinous acid-catalyzed cross-coupling of aryl halides and aryl grignards

A series of sterically hindered biaryls have been obtained by palladium- and nickel-phosphinous acid-catalyzed Kumada-Corriu cross-coupling of ortho-substituted aryl halides and Grignard reagents. This method allows formation of di- and tri-ortho-substituted biaryls in 87-98% yield under mild reaction conditions even when electron-rich aryl chlorides are used. The reaction also proceeds with aryl iodides at -20 degrees C, and under these conditions, functional groups that are generally not compatible with Grignard reagents are tolerated.     

钯碳催化下以甲酰肼为还原剂的卤代芳烃还原偶联反应研究

在Pd/C催化下, 以甲酰肼为还原剂, 卤代芳烃通过还原偶联反应能高选择性地合成相应的联苯化合物. 具有不同取代基的卤代芳烃的还原偶联反应产率在52%～94%之间.     

Palladium-phosphinous acid-catalyzed cross-coupling of aryl and acyl halides with aryl-, alkyl-, and vinylzinc reagents

Several palladium-phosphinous acids have been prepared and employed in cross-coupling reactions of aryl or acyl halides with aliphatic and aromatic organozinc reagents. The POPd7-catalyzed reaction of aryl halides, including electron-rich aryl chlorides, and arylzinc reagents was found to afford biaryls exhibiting alkoxy, alkylthio, amino, ketone, cyano, nitro, ester, and heteroaryl groups in 75-93% yield. Excellent results were obtained with sterically hindered substrates which gave di- and tri -ortho-substituted biaryls in up to 92% yield. Aryl halides also undergo POPd7-catalyzed aryl-vinyl and aryl-alkyl bond formation under mild conditions. Styrenes and alkylarenes were prepared in 79-93% yield from aryl halides and vinyl or alkylzinc reagents. The replacement of aryl halides by acyl halides provides access to ketones which were produced in up to 98% yield when POPd was used as catalyst. This approach overcomes the limited substrate scope, reduced regiocontrol, and low functional group tolerance of traditional Friedel-Crafts acylation methods.     

Single‐Electron‐Transfer‐Induced Coupling of Arylzinc Reagents with Aryl and Alkenyl Halides

Arylzinc reagents, prepared from aryl halides/zinc powder or aryl Grignard reagents/zinc chloride, were found to undergo coupling with aryl and alkenyl halides without the aid of transition‐metal catalysis to give biaryls and styrene derivatives, respectively. In this context, we have already reported the corresponding reaction using aryl Grignard reagents instead of arylzinc reagents. Compared with the Grignard cross‐coupling, the present reaction features high functional‐group tolerance, whereby electrophilic groups such as alkoxycarbonyl and cyano groups are compatible as substituents on both the arylzinc reagents and the aryl halides. Aryl halides receive a single electron and thereby become activated as the corresponding anion radicals, which react with arylzinc reagents, thus leading to the cross‐coupling products.     

Visible‐Light‐Promoted Nickel‐ and Organic‐Dye‐Cocatalyzed Formylation Reaction of Aryl Halides and Triflates and Vinyl Bromides with Diethoxyacetic Acid as a Formyl Equivalent

A simple formylation reaction of aryl halides, aryl triflates, and vinyl bromides under synergistic nickel‐ and organic‐dye‐mediated photoredox catalysis is reported. Distinct from widely used palladium‐catalyzed formylation processes, this reaction proceeds by a two‐step mechanistic sequence involving initial in situ generation of the diethoxymethyl radical from diethoxyacetic acid by a 4CzIPN‐mediated photoredox reaction. The formyl‐radical equivalent then undergoes nickel‐catalyzed substitution reactions with aryl halides and triflates and vinyl bromides to form the corresponding aldehyde products. Significantly, besides aryl bromides, less reactive aryl chlorides and triflates and vinyl halides serve as effective substrates for this process. Since the mild conditions involved in this reaction tolerate a plethora of functional groups, the process can be applied to the efficient preparation of diverse aromatic aldehydes.     

Triphyrin catalyzed direct C–H arylation of benzene with aryl halides

Transition-metal free direct C–H arylation of benzene with aryl halides was achieved by meso-aryl-substituted [14]triphyrins(2.1.1) catalysts in an air atmosphere. Various aryl halides underwent successful direct C–H arylation of benzene to give moderate to high yields of biaryls. A radical mechanism is proposed for this triphyrin catalyzed C–H arylation reaction.     

Designing Cross-Coupling Reactions using Aryl(trialkyl)silanes

Organo(trialkyl)silanes have several advantages, including high stability, low toxicity, good solubility, easy handling, and ready availability compared with heteroatom-substituted silanes. However, methods for the cross-coupling of organo(trialkyl)silanes are limited, most probably because of their exceeding robustness. Thus, a practical method for the cross-coupling of organo(trialkyl)silanes has been a long-standing challenging research target. This article discusses how aryl(trialkyl)silanes can be used in cross-coupling reactions. A pioneering example is Cu^II catalytic conditions with the use of electron-accepting aryl- or heteroaryl(triethyl)silanes and aryl iodides. The reaction forms biaryls or teraryls. This design concept can be extended to Pd/Cu^II-catalyzed cross-coupling polymerization reactions between such silanes and aryl bromides or chlorides and to Cu^I-catalyzed alkylation using alkyl halides.     

Directed ortho metalation-based methodology. Halo-, nitroso-, and boro-induced ipso-desilylation. Link to an in situ Suzuki reaction

[reaction: see text] Treatment of DoM-derived silylated aromatics 2-4 under standard electrophilic halogenation conditions cleanly affords ipso-desilyation products 5-7, while nitration of methoxy-substituted analogues 8, 9 leads to non-ipso isomers 10, 12 and 11, 13, controlled by a silicon steric effect. Sequential ipso-borodesilylation of 2a, 3a, and 20 followed by treatment with aryl halides under Pd-catalyzed conditions constitutes an in situ Suzuki-Miyaura cross-coupling protocol to biaryls and heterobiaryls 23.     

CuBr/proline‐catalyzed cross‐coupling of unactivated benzene with aryl halides

Direct C? H arylation of unactivated benzene with aryl halides was achieved using a readily available copper catalyst. The reaction was carried out at 80 °C, using CuBr as catalyst, proline as ligand and t‐BuOK as base. This radical cross‐coupling reaction between unactivated benzene and aryl iodides proceeds via homolytic aromatic substitution and offers an efficient method for the synthesis of various biaryls in good to excellent yields. Copyright © 2015 John Wiley & Sons, Ltd.     

Biaryl synthesis from two different aryl halides with tri(2-furyl)germane

[reaction: see text] The coupling reaction of germanium compounds with aryl halides has been developed. The Pd(0)-catalyzed reaction of aryl halides with tri(2-furyl)germane provides aryltri(2-furyl)germanes in good yield. The cross-coupling reaction of aryltri(2-furyl)germanes with aryl halides is achieved. This allows facile synthesis of unsymmetrical biaryls from two different aryl halides.     

Efficient Stille cross-coupling reaction using aryl chlorides or bromides in water

An efficient Stille cross-coupling reaction using a variety of aryl halides in neat water has been developed. Employing palladium-phosphinous acid catalyst [(t-Bu)(2)P(OH)](2)PdCl(2) allows formation of biaryls from aryl chlorides and bromides in good to high yields. Functional groups such as ketones and nitriles are tolerated, and organic cosolvents are not required. The air stability and solubility in water of the palladium complexes used in this study facilitate operation of the coupling reaction and product isolation. The feasibility of catalyst recycling has also been demonstrated.     

Palladium‐catalysed room‐temperature Suzuki–Miyaura coupling in water extract of pomegranate ash,a bio‐derived sustainable and renewable medium

An agro waste‐derived, ‘water extract of pomegranate ash’ (WEPA), has been utilized for the first time as a renewable medium for Pd(OAc)₂‐catalysed Suzuki–Miyaura cross‐coupling at room temperature. This method offers a simple and sustainable synthesis of biaryls from aryl halides and arylboronic acids under ligand‐ and external base‐free aerobic and ambient conditions. This method has been found effective for both activated and unactivated aryl halides in the production of biaryls with moderate to nearly quantitative yields. The protocol shows high chemoselectivity over identical/similar reactive sites in aryl halides (i.e. selectivity over identical halogens or different halogens of aryl halides). This method exhibits high regioselectivity, i.e. the selective reactivity of a halogen over other identical halogens at different positions on the aromatic nucleus. Therefore, we disclose here a clean, benign, substantial chemo‐ and regioselective and highly economic alternative method for the palladium‐assisted synthesis of biaryls using an agro waste‐derived medium.     

Direct Synthesis of Some Oiaryl Ditellurides from Aryl Halides

The reaction of aryl halides with sodium hydrogen telluride in dimethylformamide is studied. Some diaryl ditellurides are synthesized under mild conditions by the reaction.     

A robust method for the Hiyama-type coupling of arylsiloxanes and disiloxanes with aryl halides

Palladium catalysed Hiyama-type coupling of aryl disiloxanes or aryl silanols with aryl halides in the presence of stoichiometric silver(I) oxide and catalytic TBAF allows the rapid preparation of biaryls in moderate to high yield under mild thermal or microwave irradiation conditions.     

Rhodium-catalyzed arylation using arylboron compounds: efficient coupling with aryl halides and unexpected multiple arylation of benzonitrile

[reaction: see text]. The Suzuki-Miyaura-type cross-coupling of arylboron compounds with aryl halides proceeds efficiently in the presence of a rhodium-based catalyst system to produce the corresponding biaryls. Furthermore, it has unexpectedly been observed that the treatment with benzonitrile under similar conditions brings about its multiple arylation, in which nucleophilic arylation on the cyano group and subsequent ortho arylation via C-H bond cleavage are involved.     

Palladium-Nanoparticle-Catalysed Ullmann Reactions in Ionic Liquids with Aldehydes as the Reductants: Scope and Mechanism

An efficient Ullmann-type reductive homocoupling of aryl, vinyl and heteroaryl halides can be promoted by an aldehyde in tetraalkylammonium ionic liquids under very mild reaction conditions. This simple procedure generates symmetrical biaryls under relatively mild conditions. The ionic liquid is crucial for this process because it behaves simultaneously as a base, ligand and reaction medium. The role of the aldehyde is also discussed and a general mechanism for this unusual reaction is proposed. These results open the way to a new efficient method of Pd-catalysed dehydrogenation of carbonyl compounds.     

Palladium‐Catalyzed Suzuki‐Miyaura Type Coupling Reaction of Aryl Halides with Triphenylborane‐Pyridine

The Suzuki‐Miyaura type coupling reaction of aryl halides with triphenylborane‐pyridine was described. The reaction can be catalyzed by Pd(OAc)₂ (5 mol%) in presence of Cs₂CO₃ at 50°C or 80°C, and functionalized biaryls were obtained in good to excellent yields. This protocol is general and can tolerate a wide range of functional groups.     

Metal-Free Aryl Cross-Coupling Directed by Traceless Linkers

The metal-free, highly selective synthesis of biaryls poses a major challenge in organic synthesis. The scope and mechanism of a promising new approach to (hetero)biaryls by the photochemical fusion of aryl substituents tethered to a traceless sulfonamide linker (photosplicing) are reported. Interrogating photosplicing with varying reaction conditions and comparison of diverse synthetic probes (40 examples, including a suite of heterocycles) showed that the reaction has a surprisingly broad scope and involves neither metals nor radicals. Quantum chemical calculations revealed that the C−C bond is formed by an intramolecular photochemical process that involves an excited singlet state and traversal of a five-membered transition state, and thus consistent ipso–ipso coupling results. These results demonstrate that photosplicing is a unique aryl cross-coupling method in the excited state that can be applied to synthesize a broad range of biaryls.     

Biaryl synthesis via Pd-catalyzed decarboxylative coupling of aromatic carboxylates with aryl halides

A new strategy for the regiospecific construction of unsymmetrical biaryls is presented, in which easily available salts of carboxylic acids are decarboxylated in situ to give arylmetal species that serve as the nucleophilic component in a catalytic cross-coupling reaction with aryl halides. The catalyst system consists of a copper phenanthroline complex that mediates the extrusion of CO2 from aromatic carboxylates to generate arylcopper species, and a palladium complex that catalyzes the cross-coupling of these intermediates with aryl halides. This bimetallic system allows the direct coupling of various aryl, heteroaryl, or vinyl carboxylic acids with aryl or heteroaryl iodides, bromides, or chlorides at 160 degrees C in the presence of a mild base such as potassium carbonate. The present scope and potential economic impact of the reaction are demonstrated by the synthesis of 42 biaryls, some of which are of substantial industrial relevance. Remaining challenges and future perspectives of the new transformation are discussed.     

Indolylbenzimidazole‐based ligands catalyze the coupling of arylboronic acids with aryl halides

A novel class of compounds bearing indole and benzimidazole rings was designed and easily synthesized from 2‐indolecarboxylic acid and o‐phenylenediamine. The catalytic system derived from a 2‐indolylbenzimidazole‐based ligand and Pd(OAc)₂ in situ could lead to complete conversion of aryl bromides at 0.5 mol% Pd loading under mild reaction conditions. In the presence of a catalyst, sterically hindered biaryls were selectively generated in excellent yields by adjusting reaction parameters through the coupling of arylboronic acids with aryl halides. The efficiency of this reaction was demonstrated by its compatibility with various functional groups.