Enantioselective synthesis of two key intermediates for leukotrienes A_4 and B_4

Leukotrienes, arachidonic acid derived metabolites of great biological signifi-cance, are present in tissue at extremely low concentrations, so that experimentalquaatities are only accessible by chemical synthesis. In various synthetic routes,[S,S-(E)]-3-(hydroxymethyl) oxiranebutanoic acid methyl ester (1) and (S)-5-(ben-zoyloxy)-6-oxohexanoic acid methyl ester (2) have been frequently used as the C_1-C_7 fragment of LTA_4 3 and the C_1-C_6 fragment of LTB_4 4, respectively. (Scheme1)     

The preparation of octahydro leukotrienes C,D, and E via a stereoselective sulfenyllactonization reaction

Sulfenyl halides derived from the N-trifluoroacetamido methyl ester derivatives of cysteine, cysteinyiglycine and glutathione react stereoselectively with (5E)- and (5Z)-eicosenoic acids to provide, after separation of diastereomers and hydrolysis of the protecting groups, the fully saturated analogues of leukotrienes LTC₄, LTD₄, and LTE₄.     

Single-step purification and immobilization of penicillin acylase using hydrophobic ligands

Five differenthydrophobic ligands immobilized on 4% (4XL) and 6% (6XL) crosslinked agarose were used to study the single-step purification of penicillin acylase from cell lysate. The 4XL gels showed relatively higher specific activity and recovery than the 6XL gels. In single-step purification, highly active enzyme (42 U/mg) was obtained using moderately hydrophobic ligand (octyl). The crude enzyme immobilized on octyl gel by adsorption showed significant operational stability over a period of 30 d at room temperature. Reactor studies demonstrated the feasibility of hydrophobic ligands as a medium for immobilization.     

A simple procedure for highly efficient purification of ultratrace Pu from Pb by extraction chromatography

Journal of Radioanalytical and Nuclear Chemistry - It is very important to remove Pb interference for the accurate determination of ultratrace Pu by ICP-MS. A simple and efficient separation...     

The total synthesis of coleophomones B, C, and D

Members of the coleophomone family of natural products all possess several intriguing and challenging architectural features, as well as exhibit unusual biological activity. They, therefore, constitute attractive targets for synthesis. In this Article, we describe the total synthesis of coleophomones B (2), C (3), and D (4). The highly strained and congested 11-membered macrocycle of coleophomones B (2) and C (3) was constructed using an impressive olefin metathesis reaction. Furthermore, both of the requisite geometric isomers of the Delta(16,17) within the macrocycle could be accessed from a common precursor, facilitating a divergence that lent the coleophomone B (2)/C (3) synthesis an unusually high degree of efficiency. The synthesis of coleophomone D (4) confirmed that it exists as a dynamic mixture of isomeric forms with a different aromatic substitution pattern from the other family members.     

Total synthesis of maremycins A,B, C1/C2, D1, and D2

The total synthesis of maremycins A, B, C₁/C₂, D₁, and D₂ is achieved starting from the natural amino acids l-isoleucine and S-methyl-l-cysteine, in which the total synthesis of maremycins B, C₁/C₂, and D₂ is accomplished for the first time. The synthesis features a position-selective intramolecular bromination process for the synthesis of key chiral building block, a Pd-catalyzed indole synthesis for the preparation of (2S,3S)-β-methyltryptophan and hydroxylation of oxindoles by molecular oxygen. In addition, the protocol for conversion of maremycins A and B to maremycins C and D was improved.     

A population analysis of the bonding in N2O4, B2Cl4, B2F4, C2H4 and C3H4

Population matrices have been calculated from molecular orbital wave functions of N₂O₄, B₂Cl₄, and B₂F₄ in order to understand further the bonding in these molecules which are isoelectronic in valence electrons but different in structure. C₂H₄ and C₃H₄ have been included in this study as check cases.

---

Zusammenfassung Ausgehend von Molekülorbitalen werden Besetzungsmatrizen für N₂O₄, B₂Cl₄ und B₂F₄ berechnet, um die Bindung in diesen Molekülen, die in den Valenzelektronen isoelektronisch sind, aber unterschiedliche Strukturen aufweisen, besser zu verstehen. C₂H₄ und C₃H₄ sind in dieser Untersuchung als Prüffälle eingeschlossen.

---

Résumé Des matrices d'occupation ont été calculées à partir des orbitales moléculaires de N₂O₄, B₂Cl₄ et B₂F₄, afin de comprendre plus profondément la liaison dans ces molécules, qui sont isoélectroniques par leurs électrons de valence, mais qui n'ont pas la même structure. C₂H₄ et C₃H₄ sont considérés dans cette étude à titre de vérification.

     

Eine Schnellmethode zur papierchromatographischen Trennung der 4 Sojabohnen-Sapogenole (A, B, C, D)

Ohne Zusammenfassung     

Single-step affinity purification of toxic and non-toxic proteins on a fluidics platform

Single-step fusion-based affinity purification of proteins with pH-controllable linkers was carried out in a fluidic device. The linkers were previously derived from self-splicing protein elements called inteins. Two different linkers were generated to solve two distinct separation problems: one for rapid single-step affinity purification of a wide range of proteins, and the other specifically for the purification of cytotoxic proteins. Scale-down factors of 185 resulted in separations in a 27 microl bed-volume. A rotating CD format was chosen because of its simplicity in effecting fluid movement through centrifugal force without the complications associated with electro-osmosis and other pumping methods. The design and fabrication of the fluidic device and the protein purification process are described. This work, which demonstrates the purification of active proteins by two distinct fluidic separations, is widely applicable to small-scale massively parallel proteomic separations.     

A new procedure for extraction of collagen from modern and archaeological bones for 14C dating

Bones are potentially the best age indicators in a stratigraphic study, because they are closely related to the layer in which they are found. Collagen is the most suitable fraction and is the material normally used in radiocarbon dating. Bone contaminants can strongly alter the carbon isotopic fraction values of the samples, so chemical pretreatment for ¹⁴ C dating by accelerator mass spectrometry (AMS) is essential. The most widespread method for collagen extraction is based on the Longin procedure, which consists in HCl demineralization to dissolve the inorganic phase of the samples, followed by dissolution of collagen in a weak acid solution. In this work the possible side effects of this procedure on a modern bone are presented; the extracted collagen was analyzed by ATR-IR spectroscopy. An alternative procedure, based on use of HF instead of HCl, to minimize unwanted degradation of the organic fraction, is also given. A study by ATR-IR spectroscopic analysis of collagen collected after different demineralization times and with different acid volumes, and a study of an archaeological sample, are also presented.     

地耳苯抗疟有效成份的研究—地耳苯系A、B、C、D的分离和结构

从地耳草中分离到四个间苯三酚衍生物, 定名为地耳草素A、B、C、D. 通过紫外、红外、核磁和质谱分析以及化学反应, 推定其结构分别为4、8、12和14. 4和8对鼠疟原虫有显著抑制作用.     

Concise syntheses of cystothiazoles A, C, D, and melithiazol B

A convergent synthesis of cystothiazoles C 1 and D 3 was achieved based on Julia coupling between the functionalized aldehyde 5b, corresponding to left half of the final molecule, and aryl sulfone 6 or 7, bearing a bithiazole moiety, corresponding to right half. Methylation of 1 and 3 gave cystothiazole A 2 and melithiazol B 4, respectively. The overall yield (5 steps from (2R,3S)-3-methylpent-4-yne-1,2-diol 10; 57%) of 5b via the present route was improved in comparison to that of the previously reported functionalized aldehyde 5a (7 steps from 10; 13%). By applying the modified Julia coupling method, selectivity (6E/6Z=20 : 1-26 : 1) toward the (6E)-form of the coupled products (15 or 19) against the corresponding (6Z)-form was improved in comparison to the Wittig method (6E/6Z=4 : 1-6.9 : 1).     

High-resolution rotational spectroscopy of the carbon chain anions C3N-, C4H-, and C4D(-)

The rotational spectra of C(3)N(-), C(4)H(-), and C(4)D(-) have been measured at high-spectral resolution by Fourier transform microwave spectroscopy. For both C(3)N(-) and C(4)D(-), hyperfine structure in the lowest-J transitions has been resolved and measured to better than 0.1 ppm. The quadrupole coupling constants eQq for both anions are close to those of the neutral counterparts C(3)N and C(4)D, and that of C(3)N(-) is in good agreement with theoretical calculations. Several properties of these anions, including their linewidths, drift velocities, and abundances, are systematically compared to similar-sized neutral molecules. The production of C(4)H(-) with different hydrocarbon precursor and buffer gases is also discussed.     

Synthesis of xyloketal A, B, C, D, and G analogues

A series of demethyl analogues of the natural products xyloketal A, B, C, D, and G have been prepared in a notably direct manner from 3-hydroxymethyl-2-methyl-4,5-dihydrofuran and a series of corresponding phenols. These syntheses featured a boron trifluoride diethyl etherate-promoted electrophilic aromatic substitution reaction as a key step. In the case of the synthesis of analogues of xyloketal A, the process was found to be highly efficient (up to 93% yield). The optimized isolated yield of these reaction products is remarkable in view of the fact that this transformation involves, minimally, six individual reactions. Moreover, these synthetic studies provide significant insight into the possible biogenic origin of the xyloketal natural products.     

Single-step purification of rat C-reactive protein and generation of monospecific C-reactive protein antibody

Although Sepharose-phosphorylcholine affinity chromatography has been used extensively to purify some acute phase proteins, the operation has usually been a laborious multi-step procedure. By modifying previously described multi-step protein purification assays, centigram quantities of pure rat C-reactive protein (CRP) could be obtained in a single chromatographic step using affinity chromatography. Rat serum was passed over a column of p-aminophenylphosphorylcholine and extraneous proteins eluted with Tris-saline-Ca2+ buffer. Similar to other purification procedures, CRP was eluted with phosphorylcholine in a Tris-saline-Ca2+ buffer. The technical detail which distinguished this procedure from others, was the use of a phosphorylcholine gradient shallow enough (0.95 mM-2.5 mM) to resolve the eluent into two peaks; the first peak was composed largely of the contaminant, serum amyloid protein (SAP), and the second was composed of CRP. Although there was some overlap between the first and second peak, pure CRP could be obtained by pooling fractions from the trailing shoulder of the second peak. Using this single step procedure, a greater than 25% yield of SAP-free, purified CRP could be obtained. The purified CRP was free of SAP contamination as measured by sodium dodecyl sulfate gradient polyacrylamide gel electrophoresis. Purified CRP was determined to be free of rat albumin, IgG and the C3 component of complement using immunoelectrophoresis. This one-step affinity column chromatography procedure provides a simple, efficient method for collecting large quantities of rat CRP pure enough to be used to obtain a monospecific goat, anti-rat CRP antibody.