"One-step" simplified electrochemical sensing of TATP based on its acid treatment

A fast, simple and sensitive electrochemical method for sensing peroxide-based explosives based on their acid treatment is reported. The method relies on the high electrocatalytic activity of Prussian-blue (PB)-modified electrodes towards the acid-generated hydrogen peroxide in the harsh acidic medium (down to pH 0.3) used for releasing hydrogen peroxide. Such effective operation of PB electrochemical sensors in strongly acidic media eliminates the need for an additional neutralization step required in analogous peroxidase-based assays (due to acid-induced enzyme deactivation processes). Factors affecting the efficiency of the acid pre-treatment of triacetone triperoxide (TATP) have been examined and optimized to allow its sensitive measurement down to the 50 ng level within 60 s. Chronoamperometric detection of microgram amounts of solid TATP, following a one-minute acid mixing and placing a 20 microL droplet onto a disposable PB-modified screen-printed electrode is illustrated. Similar results were obtained for the peroxide explosive hexamethylene triperoxide diamine (HMTD). By greatly simplifying the analytical procedure, such an acid-operated "artificial peroxidase" electrocatalytic transducer holds great promise for designing "one-step", user-friendly, miniaturized, cost-effective devices for field screening of peroxide explosives.     

Current trends in the detection of peroxide-based explosives

The increased use of peroxide-based explosives (PBEs) in criminal and terrorist activity has created a demand for continued innovation in the detection of these agents. This review provides an update to a previous 2006 review on the detection of PBEs, with a focus in this report on luminescence and fluorescence methods, infrared and Raman spectroscopy, mass spectrometry, and electrochemical techniques. Newer developments in gas chromatography and high performance liquid chromatography methods are also discussed. One recent trend that is discussed is an emphasis on field measurements through the use of portable instruments or portable assay formats. An increase in the use of infrared spectroscopy and mass spectrometry for PBE analysis is also noted. The analysis of triacetone triperoxide has been the focus in the development of many of these methods, although hexamethylene triperoxide diamine has received increased attention in PBE detection during the last few years.     

3-Glycidoxypropyltrimethoxysilane mediated in situ synthesis of noble metal nanoparticles: application to hydrogen peroxide sensing

The in situ synthesis is reported of noble metal nanoparticles via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated metal salts during sol-gel processing. The method described involves the synthesis of uniform spherical nanoparticles of gold, silver and palladium with controlled size that can be directly utilized for thin film preparation. A detailed study of the synthesis and application of gold nanoparticles to the electrochemical detection of hydrogen peroxide was carried out and reveals that the amplification of hydrogen peroxide sensing is size-dependent. In addition, these nanoparticles exhibit excellent compatibility towards composite preparation. As an example, a nanocomposite with Prussian Blue (PB) is synthesized and found to be useful for the fabrication of chemically modified electrodes (CME). The resulting CME shows dramatic improvement in the electrochemistry of PB with gradual enhancement in electrocatalytic efficiency towards hydrogen peroxide sensing. The nanocomposite is used to study the direct and horseradish peroxidase (HRP)-catalyzed reduction of hydrogen peroxide. The results recorded for hydrogen peroxide analysis show an improvement in sensitivity and limit of detection on decreasing the size of gold nanoparticles in all cases.     

Amperometric sensing of hydrogen peroxide vapor for security screening

Rapid detection of the hydrogen peroxide precursor of peroxide explosives is required in numerous security screening applications. We describe a highly sensitive and selective amperometric detection of hydrogen peroxide vapor at an agarose-coated Prussian-blue (PB) modified thick-film carbon transducer. The sensor responds rapidly and reversibly to dynamic changes in the level of the peroxide vapor, with no apparent carry over and with a detection limit of 6 ppbv. The remarkable selectivity of the PB-based screen-printed electrode towards hydrogen peroxide leads to effective discrimination against common beverage samples. For example, blind tests have demonstrated the ability to selectively and non-invasively identify concealed hydrogen peroxide in drinking cups and bottles. The attractive performance of the new microfabricated PB-based amperometric peroxide vapor sensor indicates great potential for addressing a wide range of security screening and surveillance applications. Figure Experimental setup (left) with three electrode electrochemical Hydrogen Peroxide sensor hanging above container of “unknown” liquid. Schematic (right) demonstrating fundamental principles of operation of the sensor.     

Fabrication of Prussian Blue modified ultramicroelectrode for GOD imaging using scanning electrochemical microscopy

A Prussian Blue (PB) film modified disk ultramicroelectrode (UME) was fabricated by electrochemical deposition technique on a Pt-disk UME. The electrocatalytical reductions of hydrogen peroxide derived from glucose oxidase (GOD) on this modified UME were investigated. The enzymatic biochemical reactivity was imaged by scanning electrochemical microscopy (SECM) utilizing the PB film modified UME. It is evident that sensitivity and spatial resolution for hydrogen peroxide measurement were improved obviously. SECM images obtained clearly revealed the concentration profile of the reaction products around the enzymes. The PB film modified microelectrode is in the nature of simple preparation, high catalytic activity on hydrogen peroxide and substrate selectivity for SECM etc.     

In situ synthesis of a Prussian blue nanoparticles/graphdiyne oxide nanocomposite with high stability and electrocatalytic activity

Herein we report an in situ synthesis of Prussian blue nanoparticles (PB) on graphdiyne oxide (GDYO) which acts as an excellent substrate. The hybrid was then used as an electrode with high electrochemical catalytic activity towards hydrogen peroxide. The PB/GDYO hybrid was prepared by simply adding FeCl₃ to GDYO solution, and then mixing with Fe(CN)₆^3 − at room temperature. The GDYO was able to anchor PB in nanoparticle form and stabilize it in neutral and weakly basic solutions. The hybrid was investigated by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and electrochemical measurements. The PB/GDYO hybrid showed high electrochemical catalytic activity and stability for the detection of hydrogen peroxide.     

Multilayer assembly of Prussian blue nanoclusters and enzyme-immobilized poly(toluidine blue) films and its application in glucose biosensor construction

A multilayered glucose biosensor via sequential deposition of Prussian blue (PB) nanoclusters and enzyme-immobilized poly(toluidine blue) films was constructed on a bare Au electrode using electrochemical methods. The whole configuration of the present biosensor can be considered as an integration of several independent hydrogen peroxide sensing elements. In each sensing element, the poly(toluidine blue) film functioned as both the supporting matrix for the glucose oxidase immobilization and the inhibitor for the diffusion of interferences, such as ascorbic acid and uric acid. Meanwhile, the deposited Prussian blue nanocluster layers acts as a catalyst for the electrochemical reduction of hydrogen peroxide formed from enzymatic reaction. Performance of the whole multilayer configuration can be tailored by artificially arranging the sensing elements assembled on the electrode. Under optimal conditions, the biosensors exhibit a linear relationship in the range of 1 x 10(-4) to 1 x 10(-2) mol/L with the detection limit down to 10(-5) mol/L. A rapid response for glucose could be achieved in less than 3 s. For 1 mM glucose, 0.5 mM acetaminophen, 0.2 mM uric acid, and 0.1 mM ascorbic acid have no obvious interferences (<5%) for glucose detection at an optimized detection potential. The present multilayered glucose biosensor with a high selectivity and sensitivity is promising for practical applications.     

Chronocoulometric study of the electrochemistry of Prussian blue

During the electrochemical oxidation of Prussian blue (PB) to Prussian yellow (PY), an electrocatalytic oxygen production proceeds at the electrode when aqueous electrolyte solutions are used. The formed oxygen is scavenged by the PY, probably by absorption, and it is consumed during the electrochemical reduction of PY to PB by a heterogeneous chemical reaction of PB with oxygen to PY and hydrogen peroxide. Because of this catalytic regeneration of PY, it is impossible to determine the amount of low-spin iron by chronocoulometry using a potential program in which PB is first oxidized to PY and then the charge is measured to reduce PY to PB. The latter charge is biased by the electrocatalytic PY regeneration.     

Recent advances in electrochemical sensing for hydrogen peroxide: a review

Due to the significance of hydrogen peroxide (H(2)O(2)) in biological systems and its practical applications, the development of efficient electrochemical H(2)O(2) sensors holds a special attraction for researchers. Various materials such as Prussian blue (PB), heme proteins, carbon nanotubes (CNTs) and transition metals have been applied to the construction of H(2)O(2) sensors. In this article, the electrocatalytic H(2)O(2) determinations are mainly focused on because they can provide a superior sensing performance over non-electrocatalytic ones. The synergetic effect between nanotechnology and electrochemical H(2)O(2) determination is also highlighted in various aspects. In addition, some recent progress for in vivo H(2)O(2) measurements is also presented. Finally, the future prospects for more efficient H(2)O(2) sensing are discussed.     

Effect of Various Deposition Techniques,Electrode Materials and Posttreatment with Tetrabutylammonium and Tetrabutylphosphonium Salts on the Electrochemical Behavior and Stability of Various Prussian Blue Modified Electrodes

The effect of various deposition techniques, electrode materials and posttreatment with tetrabutylammonium and tetrabutylphosphonium salts on the electrochemical behavior and stability of various Prussian blue (PB) modified electrodes, namely PB modified glassy carbon electrodes, silicate‐film supported PB modified glassy carbon electrodes, PB‐doped silicate glassy carbon electrodes, PB modified carbon ceramic electrodes using electrochemical deposition and PB modified carbon ceramic electrodes using chemical deposition is reported. Cyclic voltammetry and amperometric measurements of hydrogen peroxide were performed in a flow injection system while the carrier phosphate buffer (pH 7.0) with a flow rate of 0.8 mL min^?1 was propelled into the electrochemical flow through cell housing the PB modified working electrode as well as an Ag|AgCl|0.1 M KCl reference and a Pt auxiliary electrode. The results showed that the deposition procedure, electrode material and posttreatment with additional chemicals can significantly alter the stability and electrochemical behavior of the PB film. Among the studied PB modified electrodes, those based on carbon ceramic electrodes modified with a film of electropolymerized PB showed the best electrochemical stability.     

Selective gas-phase capture of explosives on metal beta-diketonate polymers

A variety of metal beta-diketonate polymers were assessed for gas-phase selective retention of nitro aromatic, nitrate ester, and peroxide explosives. The La(III) complex of p-di(4,4,5,5,6,6,6-heptafluoro-1,3-hexanedionyl)benzene [La(dihed)] showed 13-42 times the retention for the nitro aromatic compounds compared to a control column (identical column but lacking the 5% loading of the metal beta-diketonate polymer). Nitrate esters, the peroxide explosive triacetone triperoxide, and the taggant 1,4-dimethyl-1,4-dinitrobutane were too strongly retained to elute from the La(dihed) column; however, these compounds could be eluted from the less retentive Cu(dihed) or Zn(dihed) columns. A Kováts index of 2124 for 2,4,6-trinitrotoluene (TNT) on the La(dihed) column compared to 1662 on the control illustrates the excellent discrimination against nonpolar hydrocarbons, the principal matrix interference expected in air samples. A proof-of-principle experiment demonstrated analysis of an extrapolated 47 part-per-trillion (ppt) (v/v) of TNT in an air extract concentrate.     

过氧化丙酮类炸药的检测方法研究进展

恐怖袭击是当今世界安全的重大隐患之一,过氧化物炸药因其难以被常规手段检测的特点常被不法分子使用,其中过氧化丙酮类炸药是恐怖分子常用的爆炸物质.本文主要简述了近20年来关于过氧化丙酮类炸药的不同检测方法,主要包括传统检测技术如荧光检测技术和质谱、色谱、拉曼光谱等波谱技术以及基于电化学法、化学比色法、物理传感器和生物免疫的...     

Recent advances in the use of ionic liquids for electrochemical sensing

Ionic Liquids are salts that are liquid at (or just above) room temperature. They possess several advantageous properties (e.g. high intrinsic conductivity, wide electrochemical windows, low volatility, high thermal stability and good solvating ability), which make them ideal as non-volatile electrolytes in electrochemical sensors. This mini-review article describes the recent uses of ionic liquids in electrochemical sensing applications (covering the last 3 years) in the context of voltammetric sensing at solid/liquid, liquid/liquid interfaces and carbon paste electrodes, as well as their use in gas sensing, ion-selective electrodes, and for detecting biological molecules, explosives and chemical warfare agents. A comment on the future direction and challenges in this field is also presented.     

Self‐Assembled Prussian Blue Nanoparticles Based Electrochemical Sensor for High Sensitive Determination of H2O2 in Acidic Media

In this paper, self‐assembled Prussian blue nanoparticles (PBNPs) on carbon ceramic electrode (CCE) were developed as a high sensitive hydrogen peroxide (H₂O₂) electrochemical sensor. The PBNPs film was prepared by a simple dipping method. The morphology of the PBNPs‐modified CCE was characterized by scanning electron microscopy (SEM). The self‐assembled PB film exhibited sufficient mechanical, electrochemical stability and high sensitivity in compare with other PB based H₂O₂ sensors. The sensor showed a good linear response for H₂O₂ over the concentration range 1 μM–0.26 mM with a detection limit of ca. 0.7 μM (S/N=3), and sensitivity of 754.6 mA M^?1 cm^?2. This work demonstrates the feasibility of self‐assembled PBNPs‐modified CCE for practical sensing applications.     

层层自组装法制备普鲁士蓝修饰电极及对过氧化氢的测定

Fe3+可与电沉积在玻碳电极表面的对氨基苯磺酸发生静电吸附作用并与[Fe(CN)6]4-形成普鲁士蓝(PB),进一步交替重复吸附Fe3+和[Fe(CN)6]4-反应,形成PB晶体.该晶体对还原过氧化氢(H2O2)具有很高的电化学活性.通过循环伏安法、交流阻抗法和计时电流法对传感器进行了电化学表征.研究了该传感器对H2O2的电催化作用,探讨了工作电位,PH值及干扰物质对响应电流的影响.结果表明,在磷酸盐缓冲溶液中(pH =5.4,0.1 mol/L),响应电流与H2O2的浓度在0.97 ～ 32.33 mmol/L范围内具有良好的线性关系,相关系数为0.9993,传感器的响应时间小于5 s,检测限为0.48 mmol/L( S/N为3).     

新型普鲁士蓝纳米方块-离子液体复合纳米界面协同检测鸟嘌呤

本文利用离子液体(IL)和普鲁士蓝(PB)纳米方块的协同作用测定鸟嘌呤。首先制备了IL-PB修饰电极,用循环伏安法对修饰电极进行了表征。为了使PB自身的信号达到最大,优化了各种制备条件,如IL和PB的比例,KCl溶液和HCl的浓度等。使用制备的修饰电极催化鸟嘌呤,优化了鸟嘌呤的测定条件如B-R缓冲溶液pH值;疏水性离子液体和亲水性离子液体对鸟嘌呤的影响,结果表明疏水性离子液体催化效果更好。该法在最优化条件下检测鸟嘌呤,在4.0×10-7～1.4×10-6 mol/L范围内与氧化峰电流呈现良好的线性关系,检出限为6.0×10-8 mol/L。     

3,3,6,6,9,9‐Hexaethyl‐1,2,4,5,7,8‐hexaoxacyclononane at 296 K

The title molecule (diethyl ketone triperoxide, DEKTP), C₁₅H₃₀O₆, is a cyclic triperoxide closely related to triacetone triperoxide (TATP), one of the most unstable explosives known. However, the stability of DEKTP is ca 20–50 times greater than that of TATP. DEKTP crystallizes with two molecules in the asymmetric unit, with virtually identical geometry. The cyclononane core is stabilized in a twisted boat–chair conformation (approximate D₃ symmetry), very close to that previously described for TATP. The explanation for the safe thermal behaviour of DEKTP compared with TATP should thus not be sought in the molecular dimensions, but rather in the thermal decomposition kinetics.     

TATP的质子转移反应的质谱研究

利用密度泛函理论(DFT), 在B3LYP/cc-pVDZ水平上, 对三过氧化三丙酮(Triacetone triperoxide, TATP)及其质子化离子[TATP+H]+进行了构型优化和质子亲和势(Proton Affinity, PA)计算, 研究结果表明, PA(TATP)=866.73 kJ/mol大于PA(H2O)=691.0 kJ/mol, TATP与H3O+可发生质子转移反应. 在自行研制的质子转移反应质谱(Proton transfer reaction mass spectrometry, PTR-MS) 装置上, 研究了TATP与H3O+反应生成的特征离子. 当漂移管中E/N=1.4×10-15 V·cm2时, 在荷质比m/z=91, 75, 74, 59, 43等处观察到了产物离子. 降低E/N至0.5×10-15 V·cm2后, 在m/z=223处观察到了质子化产物离子([TATP+H]+), 验证了计算结果; 结合[TATP+H]+的构型, 分析了TATP质子转移反应产物离子可能的归属及其形成过程. 结合PTR-MS漂移管内E/N的改变引起m/z=223, 91, 43等离子的变化特征, 可实现TATP的准确识别和快速定量检测, 检测下限达到5.0×10-10 mol/L(±50%).     

Analysis of explosives using differential mobility spectrometry

Characterization of ions from eight explosives (2,4,6-trinitrotoluene, pentaerythritol tetranitrate, 2,4,6-trinitrophenol, 2,4-dinitrotoluene, erythritol tetranitrate, hexamethylene triperoxide diamine, 2,4,6-trinitrophenylmethylnitramine and 1,3,5-trinitro-perhydro-1,3,5-triazine) using differential mobility spectrometry (DMS) with ⁶³Ni as an ionization source was performed. Presented results of explosive analysis have been evaluated by use of special software tool which communicates with DMS in real time. This tool was developed for visualization, identification and comparison of measured data. Each explosive provides characteristic signal at a specific compensation voltage under a fixed dispersion field. Peaks in DMS spectra for these ions were confined to a range of compensation voltages between ?1.61 to +1.71 V at RF = 1060 V. We calculated specific alpha coefficients (α₂ and α₄) to obtain a nonlinear function of explosives, based on their DMS spectra. Dependence of mobility for measured explosives ions in electric field at E/N values between 0 to 120 Td were used to inspectional graphical differentiation of explosives.     

Electrochemically deposited thiophene-based polymers as protective agents for Prussian Blue thin films

A composite material based on overlapped layers of electrochemically synthesized Prussian Blue (PB) and terthiophene-derived polymer is described, aiming at enhancing the stability of the hexacyanoferrate thanks to the protective action of the polymer. Two bilayer configurations and deposition methods (for the polymer component) were tested. The morphology and electrochemical behavior in organic solvent and in aqueous solutions containing different supporting electrolytes were carried out. The best performances of electrodes modified with films of the composite material as to increased stability of PB were achieved with the potentiostatically deposited polymer covering the PB layer, in acetate buffer at pH 5.5. As for potential cycling stress, the anodic and cathodic peak currents due to PB were not decreased after 20 cycles. Conversely, PB alone displayed the anodic peak currents relevant to PB/Prussian White (PW) and PB/Berlin Green (BG) systems decreased by about 30 %. The stability to local pH increase was assessed by cyclic voltammetry after electrochemical reduction of H₂O₂. For example, the anodic peak currents were decreasing by 15 % and 5 % for the two PB redox systems, while for PB alone the same currents decreased by 35 % and 10 %. The response sensitivity to hydrogen peroxide was improved by 54 %, with respect to PB alone, as evaluated by chronoamperometry.