Optimization of the new technology for manufacturing γ-polyoxymethylene

A new technology of manufacturing γ-polyoxymethylene (γ-POM) by the polymerization 1,3,5-trioxane in the presence of a boron trifluoride etherate aprotic catalytic agent and a methylal telogen in the medium of the non-ozone-depleting solvent toluene, with an yield exceeding the yield of γ-POM manufactured by the existing industrial technology by 30% is developed. Regression equations for the yield and weight-average particle size of γ-POM synthesized in the toluene medium were derived by means of the optimal experimental design technique. The equations were used to optimize parameters of the synthesis and obtain γ-POM with the weight-average particle size of 15 μm and the highest possible yield.     

Enantioselective synthesis of functionalized γ-butyrolactones

Sharpless asymmetric dihydroxylation and aminohydroxylation of (E)-dimethyl-2-alkylidene glutarates 2 were shown to afford enantio-enriched or enantiopure highly functionalized γ-butyrolactones 3 and 7.     

Influence of process parameters on the sol–gel synthesis of nano hydroxyapatite using various phosphorus precursors

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ has attracted widespread interest from both orthopedic and dental fields due to its excellent biocompatibility and tissue bioactivity properties. Since nanophase materials can mimic the dimensions of constituent components of natural tissues, the implants developed from nanophase material could serve as a successful alternative. However, the defects of hydroxyapatite ceramics, mainly brittleness and low fracture toughness, have been overcome by the use of nanophase hydroxyapatite coatings on the implant surfaces that integrate the good mechanical properties of metals and the bioactivity of hydroxyapatite. In the present investigation, Sol?Cgel hydroxyapatite was prepared from two different phosphorus precursors such as triethyl phosphate and phosphorus pentoxide respectively with calcium nitrate tetrahydrate as a calcium precursor. The effects of pH and liquid P³¹ Nuclear Magnetic Resonance spectroscopy for the solution aged at different periods were investigated and the synthesized hydroxyapatite powder was characterized by Transmission electron microscopy, X-ray Powder Diffraction, Fourier transform infrared spectroscopy and thermal analysis respectively. In order to fully understand the bioactivity of the synthesized materials, they were coated on 316L Stainless Steel implant surface by spin coating method at the spin speed of 2,000 Revolutions per minute. The effect of nanoparticles on the surface of 316L Stainless Steel implant was studied by adhesive strength measurements. The corrosion resistance property of the hydroxyapatite coatings was evaluated by electrochemical impedance analysis. From the results, it was observed that the hydroxyapatite coatings obtained from different precursors have very high resistance to corrosion with higher adhesive strength.     

Catalytic enantioselective synthesis of chiral γ-butyrolactones

A tandem catalytic asymmetric aldol reaction/cyclization of β,γ-didehydro-γ-lactones with aldehydes was achieved using chiral tin dibromide as a chiral precatalyst and sodium alkoxide as a base precatalyst. Optically active trans-β,γ-disubstituted γ-butyrolactones were selectively obtained in moderate to high yields with up to 99% ee from γ-aryl-substituted β,γ-didehydro-γ-butyrolactones and bulky aliphatic aldehydes.     

Stereoselective synthesis of γ-lactone fused cyclopentanoids

The stereoselective synthesis of γ-lactone fused cyclopentanoids applying chemoenzymatic methods is described. rac-2-Hydroxymethyl-1,4,5,6-tetrachloro-7,7-dimethoxybicyclo[2.2.1]hept-5-ene and rac-2-hydroxymethyl-1,4,5,6,7,7-hexachlorobicyclo[2.2.1]hept-5-ene were successfully resolved by Candida rugosa lipase (CRL), to afford enantiomerically enriched products with an ee of 94 and 97%, respectively. The enantiomerically enriched acetates were then subjected to ruthenium and/or cerium catalyzed oxidation to afford α-diketones and subsequent alkaline H₂O₂ mediated oxidative cleavage reaction of α-diketones, followed by CH₂N₂ esterification, gave enantiomerically enriched γ-lactone fused cyclopentanoids with known absolute configurations.     

Progress toward the synthesis of piperazimycin A: exploration of the synthesis of γ-hydroxy and γ-chloropiperazic acids

Employing Hamada’s chemistry with MAOS optimization of several steps, an expedient route to key (3S,5S)- and (3R,5R)-γ-hydroxy and (3R,5S)-γ-chloropiperazic acids, was developed en route to a total synthesis of piperazimycin A.     

Optimization of process parameters and its effect on structure and morphology of CuO nanoparticle synthesized via the sol−gel technique

This article describes systematic basic research on the optimization of the processing parameters of sol?gel technique for synthesis of the high purity CuO nanoparticles. Effect of the synthesis parameters such as copper salt concentration, solvent and gelating agent, optimized one at a time, was investigated by employing XRD, TEM, FESEM, micro-Raman, UV-visible-NIR and PL spectroscopies. XRD results clearly demonstrate the monoclinic structure of CuO nanoparticles with traceable impurities at a lower molar concentration of Cu²⁺, transition of nucleation system from homogeneous to heterogeneous state with the increase in concentration of Cu²⁺ from 0.05 to 0.15?M. It was also found that the isopropyl alcohol offers better results in comparison to ethanol and water. Moreover, the lattice parameters, space group, and crystal system were determined by powder X-ray diffraction method. Further we propose the optimization of synthesis process using ethylene glycol and citric acid (EG:CA). The Raman analysis confirmed the influence of ethylene glycol and citric acid ratio and TEM observations confirmed that EG:CA 1:2 ratio formulate homogenous flower-like nanostructures. The optical absorption of CuO nanostructures can be easily tuned by varying the concentration of citric acid without changing other conditions; it shows the role of synthesis parameters more significant. Our results suggest that the prepared CuO nanostructures have a potential to be used as absorbing material in solar cell applications.

Open image in new window

     

New method for the synthesis of γ-diketones

Summary Over platinized charcoal at 300° 1-(2-furyl)-3-alkanols, as a result of the hydrogenolysis of the furan ring, and 1-(tetrahydro-2-furyl)-3-alkanols, as a result of the isomerization of the tetrahydrofuran ring, give-diketones in yields of 35–50%.     

Asymmetric synthesis of γ-cyano silyl enol ethers

The selective oxidative cleavage of the SAMP-hydrazone moiety of 4-silyloxy-3-enal hydrazones 6, leading to the corresponding 4-silyloxy-3-alkenenitriles 7, is reported. A clean, good yielding transformation was observed when m-CPBA in CH₂Cl₂ was used as the oxidant, the presence of suspended solid NaHCO₃ being essential in preventing hydrolysis of the silyl enol ether moiety. Use of magnesium monoperoxyphthalate (MMPP) led to over-oxidated products, while hydrogen peroxide, in the presence of catalytic methyltrioxorhenium (MTO), was ineffective. Independent measurements of the enantiomeric excesses for compounds 7 demonstrated the absence of racemization during the process.     

A large-scale synthesis of enantiomerically pure γ-hydroxy-organochalcogenides

Enantiomerically pure (R)- and (S)-γ-hydroxy-organochalcogenides are prepared using poly-[R]-3-hydroxybutanoate (PHB) as the starting material.     

Catalytic asymmetric synthesis of γ-substituted vinyl sulfones

A fast new entry for the stereoselective construction of γ-substituted vinyl sulfones is presented. The key for success is the use of a readily available chiral secondary amine catalyst that allows the use of base-sensitive β-nitroethyl sulfones as masked β-sulfonyl vinyl anions in conjugate additions. The method performed in a three-step one-pot operation gives access to a great variety of vinyl sulfones in good yields and with excellent enantioselectivities. The method has also been extended to other relatively base-sensitive β-electron-withdrawing-substituted nitroalkanes to afford products with manifold functionality, providing a quick entry to very attractive synthetic intermediates for organic synthesis.     

Optimization of α-amylase production for the green synthesis of gold nanoparticles

Biocompatible gold nanoparticles have received considerable attention in recent years because of their promising applications in bioimaging, biosensors, biolabels, and biomedicine. The generation of gold nanoparticles using extra-cellular α-amylase for the reduction of AuCl₄ with the retention of enzymatic activity in the complex is being reported. The enhanced synthesis of particles has been brought about by optimizing the medium components for α-amylase. Response surface methodology and central composite rotary design (CCRD) were employed to optimize a fermentation medium for the production of α-amylase by Bacillus licheniformis at pH 8. The three variables involved in the study of α-amylase were fructose, peptone and soya meal. Only fructose had a significant effect on α-amylase production. The most optimum medium (medB) containing (%) fructose: 3, peptone: 1, soya meal: 2, resulted in a amylase activity of 201.381 U/ml which is same as that of the central level. The least optimum (medA) and most optimum (medB) media were compared for the synthesis of particles indicated by difference in color formation. Spectrophotometric analysis revealed that the particles exhibited a peak at 582 nm and the A₅₈₂ for the Med B was 8-fold greater than that of the Med A. The TEM analysis revealed that the particle size ranged from 10 to 50 nm.     

Low-temperature heat capacity and thermodynamic parameters of γ-aminobutyric acid

Thermodynamic properties of γ-aminobutyric acid were studied in the temperature interval from 5.7 to 300 K using a vacuum adiabatic calorimeter. The curve C _p (T) in the mentioned temperature interval is S-shaped without any anomalies. Based on the smoothed values of heat capacity, the calorimetric entropy $ S_{m}^{0} (T) - S_{m}^{0} (0) $ and the difference in the enthalpies $ H_{m}^{0} (T) - H_{m}^{0} (0) $ were calculated and tabulated. At the standard temperature 298.15 K, these values are equal to 158.1 ± 0.3 J K^?1 mol^?1 and 23020 ± 50 J mol^?1, respectively. At temperatures from 5 to 10 K, the function C _p (T) was found to obey the Debye law C = AT ³. Contrary to what has been supposed previously, the empirical Parks–Huffman rule for estimating entropy in the homologous series was shown to be not valid for the series glycine–β-alanine–γ-aminobutyric acid.     

A synthesis of the γ-secretase inhibitor BMS-708163

A concise, convergent racemic synthesis of BMS-708163 is reported. Two fragments consisting of N-4-chlorophenylsulfonyl-3,3,3-trifluorpropylglycine and a 1,2,4-oxadiazole derivative of 2-fluorobenzyl alcohol were prepared in separate pots and then coupled together via a Mitsunobu reaction. Since a convenient chiral synthesis of optically pure (d)-3,3,3-trifluoropropyl glycine methyl ester was developed using Schöllkopf reagent alkylation, this methodology can also be adopted for the enantioselective synthesis of BMS-708163.     

Practical asymmetric synthesis of a novel γ-secretase inhibitor

An efficient route to γ-secretase inhibitor hydroxyl thiophene sulfonamide 1 is described. The approach contains nine steps with an overall yield of 8%. The synthesis highlights a diastereoselective methylation using Evans' oxazolidinone method and a chiral Strecker reaction via Davis' sulfonimine protocol.     

A new Knoevenagel-type synthesis of fully substituted γ-hydroxybutenolides

The synthesis of fully substituted γ-hydroxybutenolides is possible by a Knoevenagel-type ring condensation of α-methyleneketones and α-ketoesters under basic conditions. This novel transformation allowed the preparation of di-aryl/heteroaryl substituted hydroxyfuranones, such as 20 and 27, which are important intermediates for pyridazine fungicides. As it turned out, a whole range of different substituents, such as alkyl, cycloalkyl, aryl, heteroaryl and ester groups could be linked to the butenolide scaffold, demonstrating the broad scope of the novel cyclization.     

Solid-phase synthesis of γ-AApeptides using a submonomeric approach

The solid-phase synthesis of γ-AApeptides using a novel submonomeric approach that utilizes an allyl protection is reported. The strategy successfully circumvents the necessity of preparing γ-AApeptide building blocks in order to prepare γ-AApeptide sequences. This method will maximize the potential of developing chemically diverse γ-AApeptide libraries and thereby facilitate the biological applications of γ-AApeptides in the future.