Sensitive amperometric pyridoxine sensor based on self‐assembled Prussian blue nanoparticle‐modified poly(o‐phenylenediamine)/glassy carbon electrode

Prussian blue nanoparticles (PBNPs) were prepared by a self‐assembly process on a glassy carbon electrode (GCE) modified with poly(o‐phenylenediamine) (PoPD) film. The stepwise fabrication process of PBNP‐modified PoPD/GCE was characterized using scanning electron microscopy and electrochemical impedance spectroscopy. The prepared PBNPs showed an average size of 70 nm and a homogeneous distribution on the surface of the modified electrode. The PBNPs/PoPD/GCE showed electrocatalytic activity towards the oxidation of pyridoxine (PN) and was used as an amperometric sensor. The modified electrode exhibited a linear response for PN oxidation over the concentration range 3–38.5 μM with a detection limit of ca 6.10 × 10^?7 M (S/N = 3) and sensitivity of 2.79936 × 10³ mA M^?1 cm^?2 using an amperometric method. The mechanism and kinetics of the catalytic oxidation reaction of PN were investigated using cyclic voltammetry and chronoamperometry. The values of α, k_cat and D were estimated as 0.36, 1.089 × 10² M^?1 s^?1 and 8.9 × 10^?5 cm² s^?1, respectively. This sensor also exhibited good anti‐interference and selectivity. Copyright © 2016 John Wiley & Sons, Ltd.     

Simultaneous Determination of Dihydroxybenzene Isomers at MWCNTs/β‐Cyclodextrin Modified Carbon Ionic Liquid Electrode in the Presence of Cetylpyridinium Bromide

Simultaneous determination of dihydroxybenzene isomers was investigated at a multi‐wall carbon nanotubes (MWCNTs)/β‐cyclodextrin composite modified carbon ionic liquid electrode in phosphate buffer solution (pH 7.0, 1/15 mol/L) in the presence of cationic surfactant cetylpyridinium bromide (CPB). With the great enhancement of surfactant CPB, the voltammetric responses of dihydroxybenzene isomers were more sensitive and selective. The oxidation peak potential of hydroquinone was about 0.024 V, catechol was about 0.140 V and resorcinol 0.520 V in differential pulse voltammetric (DPV) measurements, which indicated that the dihydroxybenzene isomers could be separated entirely. The electrode showed wide linear behaviors in the range of 1.2×10^?7–2.2×10^?3, 7.0×10^?7–1.0×10^?3, 2.6×10^?6–9.0×10^?4 mol/L for hydroquinone, catechol and resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 4.0×10^?8, 8.0×10^?8, 9.0×10^?7 mol/L, respectively. The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater, and the recovery was from 97.4% to 104.2%.     

Simultaneous Determination of Dopamine and Ascorbic Acid Using the Nano‐Gold Self‐Assembled Glassy Carbon Electrode

Electrochemical behavior of dopamine (DA) was investigated at the gold nanoparticles self‐assembled glassy carbon electrode (GNP/LC/GCE), which was fabricated by self‐assembling gold nanoparticles on the surface of L ‐cysteine (LC) modified glassy carbon electrode (GCE) via successive cyclic voltammetry (CV). A pair of well‐defined redox peaks of DA on the GNP/LC/GCE was obtained at E_pa=0.197 V and E_pc=0.146 V, respectively. And the peak separation between DA and AA is about 0.2 V, which is enough for simultaneous determination of DA and AA. The peak currents of DA and AA were proportional with their concentrations in the range of 6.0×10^?8–8.5×10^?5 mol L^?1 and 1.0×10^?6–2.5×10^?3 mol L^?1, with the detection limit of 2.0×10^?8 mol L^?1 and 3.0×10^?7 mol L^?1 (S/N=3), respectively. The modified electrode exhibits an excellent reproducibility, sensibility and stability for simultaneous determination of DA and AA in human serum with satisfactory result.     

Sorption of organic molecules on surfaces of a microporous polymer adsorbent modified with different quantities of uracil

The sorption of organic molecules on the surfaces of a number of adsorbents based on a microporous copolymer of styrene and divinylbenzene modified with different quantities of uracil is studied by means of inverse gas chromatography at infinite dilution. Samples containing 10^–6, 10^–5, 10^–4, 10^–3, 10^–2, and 0.5 × 10^?1 weight parts of uracil (the рС of uracil ranges from 1.3 to 6) are studied. The contributions from different intermolecular interactions to the Helmholtz energy of sorption are calculated via the linear free energy relationship. It is found that as the concentration of uracil on the surface of the polymer adsorbent grows, the contributions from different intermolecular interactions and the conventional polarity of the surface have a bend at рС = 3, due probably to the formation of a supramolecular structure of uracil. Based on the obtained results, it is concluded that the formation of the supramolecular structure of uracil on the surface of the polymer adsorbent starts when рС < 3.     

Investigation of the Removal of Lead by Adsorption onto 1‐(2‐Thiazolylazo)‐2‐Naphthol (TAN) Imbedded Polyurethane Foam from Aqueous Solution

A new preconcentration method is presented for lead on TAN‐loaded polyurethane foam (PUF) and its measurement by differential pulse anodic stripping voltammetry (DPASV). The optimum sorption conditions of 1.29 × 10^?5 M solution of Pb(II) ions on TAN‐loaded PUF were investigated. The maximum sorption was observed at pH 7 with 20 minutes equilibrated time on 7.25 mg mL^?1 of TAN‐loaded foam. The kinetic study indicates that the overall sorption process was controlled by the intra‐particle diffusion process. The validity of Freundlich, Langmuir and Dubinin ‐ Radushkevich adsorption isotherms were tested. The Freundlich constants 1/n and K_F are evaluated to be 0.45 ±0.04 and (1.03 +0.61) × 10^?3 mol g^?1, respectively. The monolayer sorption capacity and adsorption constant related to the Langmuir isotherm are (1.38 ± 0.08) × 10^?5 mol g^?1 and (1.46 ± 0.27) × 10⁵ L mol^?1, respectively. The mean free energy of Pb(II) ions sorption on‐TAN loaded PUF is 11.04 ± 0.28 kJ mol^?1 indicating chemisorption phenomena. The effect of temperature on the sorption yields thermodynamics parameters of ΔH, ΔS and ΔG at 298 K that are 15.0 ± 1.4 kJ mol^?1, 74 ±5 J mol^?1 K^?1 and ‐7.37 ± 0.28 kJ mol^?1, respectively. The positive values of enthalpy (ΔH) and entropy (ΔS) indicate the endothermic sorption and stability of the sorbed complexes are entropy driven. However, the negative value of Gibb's free energy (ΔG) indicates the spontaneous nature of sorption. On the basis of these data, the sorption mechanism has been postulated. The effect of different foreign ions on the sorption and desorption studies were also carried out. The method was successfully applied for the determination of lead from different water samples at ng levels.     

Methods for sorption purification of underground water to remove uranium

Possibility was examined of using sorption purification of underground water containing 246 μg dm^–3 of uranium to remove this component with zeolite and shungite of natural origin, technogenic phosphogypsum, and products of their modification under static and dynamic sorption conditions. Copper(II), nickel, and zinc hydroxides served as modifying agents. It was shown that the modified sorbents enable a substantially higher extraction of uranium into the sorbent under static and dynamic sorption conditions. The water purification reached the level satisfying the requirements of hygienic regulation GN 2.1.5.1315–03 (maximum permissible concentration of chemical substances in water of household and cultural water bodies), imposed on technical-grade water used for industrial purposes.     

Thermal Studies of New Lead(II) Coated‐Wire Membrane Electrodes

Five plastic membrane Pb²⁺‐selective electrodes were prepared based on 1,4‐bis(N‐tosyl‐o‐aminophenoxy)butane I , 1,4‐bis(N‐allyl‐N‐tosyl‐o‐aminophenoxy)butane II , 1,4‐bis(N‐benzyl‐N‐tosyl‐o‐aminophenoxy)butane III , 1,4‐bis[N‐(o‐allyloxybenzyl)‐N‐tosyl‐o‐aminophenoxy]butane IV , and 1,4‐bis(N‐octyl‐N‐tosyl‐o‐aminophenoxy)butane V as neutral carriers. The electrodes exhibited nearly Nernstian responses over the concentration ranges, 2.5×10^?4–4.0×10^?2, 2.5×10^?5–4.0×10^?2, 7.9×10^?5–4.0×10^?2, 2.2×10^?5–4.0×10^?2, and 1.9×10^?4–4.0×10^?2 M for electrodes composed with the ionophores I–V , respectively. All electrodes showed pH range of about 4.0 to 11.5 and working temperature range of 22 to 70 °C with isothermal temperature coefficients of 1.19×10^?3, 1.16×10^?3, 1.16×10^?3, 1.00×10^?3 , and 1.32×10^?3 V/°C for electrodes I–V respectively.     

Determination of L‐Vesamicol in Serum Samples Using Enantioselective,Potentiometric Membrane Electrodes Based on Antibiotics

Abstract

Enantioselective, potentiometric membrane electrodes (EPMEs) based on antibiotics are proposed for the enantioanalysis of L‐vesamicol. A carbon paste was modified with antibiotics (vancomycin, teicoplanin, and teicoplanin modified with acetonitrile), as chiral selectors. The EPMEs based on antibiotics were reliably used for enantiopurity tests of L‐vesamicol using the direct potentiometric technique. The following linear concentration ranges: 1.0×10^?6–1.0×10^?4, 1.0×10^?6–1×10^?3 and 1×10^?7?1×10^?2 mol/L; and detection limits: 1.1×10^?7, 9.6×10^?8, and 3.6×10^?8 mol/L were determine for vancomycin, teicoplanin, and teicoplanin modified with acetonitrile–based EPMEs, respectively. The proposed EPMEs were applied for the enantioanalysis of L‐vesamicol in urine samples.     

α-环糊精包结碳纳米管涂层电极同时测定多巴胺和肾上腺素

本文发现α-环糊精包结碳纳米管涂层电极对多巴胺（DA）和肾上腺素（EP）具有显著的增敏和电分离作用，还原峰电位差达390 mV。研究表明α-环糊精包结碳纳米管涂层薄膜表现出了非常令人感兴趣的电催化特性。因抗坏血酸（AA）在α-环糊精包结碳纳米管涂层电极上的氧化是不可逆的，因此利用还原峰进行测定，消除了AA对DA和EP的干扰。由于成本低和制作简便，该电极可用于生物系统电化学研究的生物传感器。     

Voltammetric Determination of 3‐Nitrofluoranthene and 3‐Aminofluoranthene at Boron Doped Diamond Thin‐Film Electrode

The voltammetric behavior of 3‐nitrofluoranthene and 3‐aminofluoranthene was investigated in mixed methanol‐water solutions by differential pulse voltammetry (DPV) at boron doped diamond thin‐film electrode (BDDE). Optimum conditions have been found for determination of 3‐nitrofluoranthene in the concentration range of 2×10^?8–1×10^?6 mol L^?1, and for determination 3‐aminofluorathnene in the concentration range of 2×10^?7–1×10^?5 mol L^?1, respectively. Limits of determination were 3×10^?8 mol L^?1 (3‐nitrofluoranthene) and 2×10^?7 mol L^?1 (3‐aminofluoranthene).     

MCM/ZrO2 nanoparticles modified electrode for simultaneous and selective voltammetric determination of epinephrine and acetaminophen

A novel MCM/ZrO₂ nanoparticles modified carbon paste electrode (MZ-CPE) was fabricated and used to study the electro oxidation of epinephrine (EP) and acetaminophen (AC) and their mixtures by electrochemical methods. The modified electrode showed electrocatalytic activity toward EP and AC oxidation with a decrease of the overpotential by 173 mV to a less positive potential for EP at the surface of the MZ-CPE and an increase in peak current at pH 7.0. Differential pulse voltammetry peak currents of EP and AC increased linearly with their concentrations in the ranges of 1.0 × 10^?6–2.5 × 10^?3 and 1.0 × 10^?6–2.0 × 10^?3 M, respectively, and the detection limits for EP and AC were 5.0 × 10^?7 and 4.5 × 10^?7 M, respectively.     

Sorption of Strontium Ions on Potassium-Titanate Nanoparticles of Various Morphology Obtained under Hydrothermal Conditions

The results of the study of the interaction of an aqueous solution of strontium nitrate with potas-sium-titanate nanoparticles of different morphology obtained by the hydrothermal method are reported. Comparative analysis showed the advantage of nanotubes as sorbents over nanolayers and nanowires. As can be seen from the experiment conducted with nanotubes containing aluminum, an amount of strontium sorbed from the solution rises with increasing temperature: at 50°C the absorption by the tubular matrix was ≈ 0.76 × 10^?3 mol g^?1, and at 80°C that was ≈ 2.02 × 10^?3 mol g^?1. Nanotube samples doped with magnesium had the best sorption characteristics: After 5 h of keeping in a solution at 80°С, the content of strontium in them was ≈3.65 × 10^?3 mol g^?1. The results show the promise of using potassium titanate nanoparticles to extract strontium from aqueous solutions.

     

Covalent Attachment of Some Phenol Derivatives to the Silica Surface by Use of Single-stage Aminomethylation

The reaction conditions and component ratios were established for the attachment of 4-(2-pyridylazo)resorcinol (PAR), 1-(2-pyridylazo)-2-naphthol (PAN) and 8-hydroxyquinoline (8-HQ) to the silica surface by means of a single-stage Mannich reaction. The modified sorbents that were synthesized were characterized by an adsorption method, and DRIFT and UV spectroscopies. The concentrations of PAR, PAN and 8-HQ grafted to the silica surface that were attained were 2.8×10⁻⁵, 8.5×10⁻⁵ and 2.7×10⁻⁴ mol g⁻¹, respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

Sorption Catalytic Determination of Copper(II) and L-α-alanine on Mg-, Al-Layered Double Hydroxides

Mg-, Al and Mg-, Cu-, Al-layered double hydroxides well-known synthetic hydrotalcite-like sorbents, were used for the first time as carriers for indicators in the sorption catalytic determination of copper(II) and L-α-alanine. Mg-, Al and Mg-, Cu-, Al-layered double hydroxides were synthesized by coprecipitation and characterized using infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The adsorption of 0.50?mg?L^?1 copper(II) solution by Mg-, Al-layered double hydroxides followed a pseudo-second-order model with an equilibrium sorption capacity of 24.2?×?10^?3?mg?g^?1 (3.8?×?10^?4?mmol g^?1) and a reaction rate constant of 4.2?g mg^?1?min^?1. Mg-, Al-layered double hydroxide tablets were prepared and used for sorption concentration and subsequent sensitive and selective sorption catalytic determination of 5.5?×?10^?3 to 1.0?mg?L^?1 copper(II) at the sorbent phase. The method was used for the analysis of natural water. A method was developed for the determination of α-alanine in Mg-, Cu-, Al-layered double hydroxide tablets with a limit of detection of 4.0?×?10^?3 mol?L^?1. In addition, thin layers of Mg-, Cu-, Al-layered double hydroxide were used to separate α-alanine and determine α-amino acids by thin-layer chromatography.     

Rate constants for the gas‐phase reactions of chlorine atoms with a series of ketones

The pulsed laser photolysis‐resonance fluorescence technique has been used to determine the absolute rate coefficient for the Cl atom reaction with a series of ketones, at room temperature (298 ± 2) K and in the pressure range 15–60 Torr. The rate coefficients obtained (in units of cm³ molecule⁻¹ s⁻¹) are: acetone (3.06 ± 0.38) × 10⁻¹², 2‐butanone (3.24 ± 0.38) × 10⁻¹¹, 3‐methyl‐2‐butanone (7.02 ± 0.89) × 10⁻¹¹, 4‐methyl‐2‐pentanone (9.72 ± 1.2) × 10⁻¹¹, 5‐methyl‐2‐hexanone (1.06 ± 0.14) × 10⁻¹⁰, chloroacetone (3.50 ± 0.45) × 10⁻¹², 1,1‐dichloroacetone (4.16 ± 0.57) × 10⁻¹³, and 1,1,3‐trichloroacetone (<2.4 × 10⁻¹²). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 62–66, 2000     

Rate constants for the gas‐phase reactions of Cl atoms with a series of ethers

The laser photolysis–resonance fluorescence technique has been used to determine the absolute rate coefficient for the Cl atom reaction with a series of ethers, at room temperature (298 ± 2) K and in the pressure range 15–60 Torr. The rate coefficients obtained (in units of cm³ molecule⁻¹ s⁻¹) are dimethyl ether (1.3 ± 0.2) × 10⁻¹⁰, diethyl ether (2.5 ± 0.3) × 10⁻¹⁰, di‐n‐propyl ether (3.6 ± 0.4) × 10⁻¹⁰, di‐n‐butyl ether (4.5 ± 0.5) × 10⁻¹⁰, di‐isopropyl ether (1.6 ± 0.2) × 10⁻¹⁰, methyl tert‐butyl ether (1.4 ± 0.2) × 10⁻¹⁰, and ethyl tert‐butyl ether (1.5 ± 0.2) × 10⁻¹⁰. The results are discussed in terms of structure–reactivity relationship. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 105–110, 2000     

Atmospheric Chemistry of α‐Diketones: Kinetics of C5 and C6 Compounds with Cl Atoms and OH Radicals

Carbonyls play an important role in atmospheric chemistry due to their formation in the photooxidation of biogenic and anthropogenic volatile organic compounds and their high atmospheric reactivity. The Cl‐initiated kinetics of two α‐diketones (2,3‐pentanedione (PTD) and 2,3‐hexanedione (HEX)) have been determined as well as the OH + HEX rate constant using atmospheric simulation chamber experiments and the relative rate method. Up to three different reference compounds were used to assess robust results. The following rate constants (in cm³ molecule⁻¹ s⁻¹) have been obtained at 298 K: k (Cl + PTD) = (1.6 ± 0.2) × 10⁻¹¹, k (Cl + HEX) = (8.8 ± 0.4) × 10⁻¹¹, and k (OH + HEX) = (3.6 ± 0.7) × 10⁻¹² with a global uncertainty of 30%. The present determinations of Cl‐ and OH‐ reaction rate constants for HEX constitute first measurements. Using the present measurements, a recently improved structure–activity relationship for Cl + ketone reactions has been updated by introducing an F (–COCO–) factor of 8.33 × 10⁻⁴. Atmospheric lifetime calculations indicate that chlorine‐initiated oxidation may be a significant α‐diketone sink in the marine‐boundary layer or in places where high Cl concentrations may be found.     

Selective Determination of Dopamine in the Presence of Ascorbic Acid at Porous‐Carbon‐Modified Glassy Carbon Electrodes

Selective dopamine (DA) determinations using porous‐carbon‐modified glassy carbon electrodes (GCE) in the presence of ascorbic acid (AA) were studied. The effects of structure textures and surface functional groups of the porous carbons on the electrochemical behavior of DA was analyzed based on both cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. The differential pulse voltammetry of DA on the modified GCE was determined in the presence of 400‐fold excess of AA, and the linear determination ranges of 0.05–0.99, 0.20–1.96, and 0.6–12.60 μM with the lowest detected concentrations of 4.5×10^?3, 4.4×10^?2, and 0.33 μM were obtained on the mesoporous carbon, mesoporous carbon with carboxylic and amino groups modified electrodes, respectively.     

L‐Cysteine Voltammetry at a Carbon Paste Electrode Bulk‐Modified with Ferrocenedicarboxylic Acid

The electrochemical behavior of L ‐cysteine studied at the surface of ferrocenedicarboxylic acid modified carbon paste electrode (FDCMCPE) in aqueous media using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry. It has been found that under optimum condition (pH 8.00) in cyclic voltammetry, the oxidation of L ‐cysteine occurs at a potential about 200 mV less positive than that of an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α, and catalytic reaction rate constant, k_h were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of L ‐cysteine showed a linear dependent on the L ‐cysteine concentration and linear analytical curves were obtained in the ranges of 3.0×10^?5 M–2.2×10^?3 M and 1.5×10^?5 M–3.2×10^?3 M of L ‐cysteine concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods respectively. The detection limits (3σ) were determined as 2.6×10^?5 M and 1.4×10^?6 M by CV and DPV methods.     

The effect of the synthesis method on the parameters of pore structure and selectivity of ferrocyanide sorbents based on natural minerals

Ferrocyanide sorbents were obtained via thin-layer and surface modification of natural clinoptilolite and marl. The effect of modification method on surface characteristics of these sorbents and their selectivity for cesium was studied. It was shown that the modification resulted in an increase of selectivity of modified ferrocyanide sorbents to cesium as compared with the natural clinoptilolite in presence of Na⁺, as well as in an increase of cesium distribution coefficients in presence of K⁺. The nickel–potassium ferrocyanide based on the clinoptilolite showed the highest selectivity for cesium at sodium concentrations of 10^?4—2 mol L^?1: cesium distribution coefficient was lg K _d = 4.5 ± 0.4 L kg^?1 and cesium/sodium separation factor was α(Cs/Na) = 250. In the presence of NH₄ ⁺, all modified sorbents showed approximately equal selectivity for ¹³⁷Cs. Probable applications of the sorbents were suggested.