Kinetic study on disproportionations of C1 aldehydes in supercritical water: methanol from formaldehyde and formic acid

The reaction pathways and kinetics of C1 aldehydes, formaldehyde (HCHO) and formic acid (HCOOH=HOCHO), are studied at 400 degrees C in neat condition and in supercritical water over a wide range of water density, 0.1-0.6 g/cm3. Formaldehyde exhibits four reactions: (i) the self-disproportionation of formaldehyde generating methanol and formic acid, (ii) the cross-disproportionation between formaldehyde and formic acid generating methanol and carbon dioxide, (iii) the water-independent self-disproportionation of formaldehyde generating methanol and carbon monoxide, and (iv) the decarbonylation of formaldehyde generating hydrogen and carbon monoxide. The self- and cross-disproportionations overwhelm the water-independent self-disproportionation and the formaldehyde decarbonylation. The rate constants of the self- and cross-disproportionations are determined in the water density range of 0.1-0.6 g/cm3. The rate constant of the cross-disproportionation is 2-3 orders of magnitude larger than that of the self-disproportionation, which indicates that formic acid is a stronger reductant than formaldehyde. Combining the kinetic results with our former computational study on the equilibrium constants of the self- and cross-disproportionations, the reaction mechanisms of these disproportionations are discussed within the framework of transition-state theory. The reaction path for methanol production can be controlled by tuning the water density and reactant concentrations. The methanol yield of approximately 80% is achieved by mixing formaldehyde with formic acid in the ratio of 1:2 at the water density of 0.4 g/cm3.     

Hydrothermal C-C bond formation and disproportionation of acetaldehyde with formic acid

Reaction pathways and kinetics of C2 (carbon-two) aldehyde, acetaldehyde (CH3CHO), and formic acid HCOOH or HOCHO, are studied in neutral and acidic subcritical water at 200-250 degrees C. Acetaldehyde is found to exhibit (i) the acid-catalyzed C-C bond formation between acetaldehyde and formic acid, which generates lactic acid (CH3CH(OH)COOH), (ii) the cross-disproportionation, where formic acid reduces acetaldehyde into ethanol, and (iii) the aldol condensation. The lactic acid formation is a green C-C bond formation, proceeding without any organic solvents or metal catalysts. The new C-C bond formation takes place between formic acid and aldehydes irrespective of the presence of alpha-hydrogens. The hydrothermal cross-disproportionation produces ethanol without base catalysts and proceeds even in acidic condition, in sharp contrast to the classical base-catalyzed Cannizzaro reaction. The rate constants of the reactions (i)-(iii) and the equilibrium constant of the lactic acid formation are determined in the temperature range of 200-250 degrees C and at HCl concentrations of 0.2-0.6 M (mol/dm(3)). The reaction pathways are controlled so that the lactic acid or ethanol yield may be maximized by tuning the reactant concentrations and the temperature. A high lactic acid yield of 68% is achieved when acetaldehyde and formic acid are mixed in hot water, respectively, at 0.01 and 2.0 M in the presence of 0.6 M HCl at 225 degrees C. The ethanol yield attained 75% by the disproportionation of acetaldehyde (0.3 M) and formic acid (2.0 M) at 225 degrees C in the absence of added HCl.     

Mechanisms and kinetics of noncatalytic ether reaction in supercritical water. 2. Proton-transferred fragmentation of dimethyl ether to formaldehyde in competition with hydrolysis

Noncatalytic reaction pathways and rates of dimethyl ether (DME) in supercritical water are determined in a tube reactor made of quartz according to liquid- and gas-phase 1H and 13C NMR observations. The reaction is studied at two concentrations (0.1 and 0.5 M) in supercritical water at 400 degrees C and over a water-density range of 0.1-0.6 g/cm3. The supercritical water reaction is compared with the neat one (in the absence of solvent) at 0.1 M and 400 degrees C. DME is found to decompose through (i) the proton-transferred fragmentation to methane and formaldehyde and (ii) the hydrolysis to methanol. Formaldehyde from reaction (i) is consecutively subjected to four types of redox reactions. Two of them proceed even without solvent: (iii) the unimolecular proton-transferred decarbonylation forming hydrogen and carbon monoxide and (iv) the bimolecular self-disproportionation generating methanol and carbon monoxide. When the solvent water is present, two additional paths are open: (v) the bimolecular self-disproportionation of formaldehyde with reactant water, producing methanol and formic acid, and (vi) the bimolecular cross-disproportionation between formaldehyde and formic acid, yielding methanol and carbonic acid. Methanol is produced through the three types of disproportionations (iv)-(vi) as well as the hydrolysis (ii). The presence of solvent water decelerates the proton-transferred fragmentation of DME; the rate constant is reduced by 40% at 0.5 g/cm3. This is caused by the suppression of low-frequency concerted motion corresponding to the reaction coordinate for the simultaneous C-O bond scission and proton transfer from one methyl carbon to the other. In contrast to the proton-transferred fragmentation, the hydrolysis of DME is markedly accelerated by increasing the water density. The latter becomes more important than the former in supercritical water at densities greater than 0.5 g/cm3.     

Mechanisms and kinetics of noncatalytic ether reaction in supercritical water. 1. Proton-transferred fragmentation of diethyl ether to acetaldehyde in competition with hydrolysis

Noncatalytic reaction pathways and rates of diethyl ether in supercritical water are determined in a quartz capillary by observing the liquid- and gas-phase 1H and 13C NMR spectra. The reaction is investigated at two concentrations (0.1 and 0.5 M) in supercritical water at 400 degrees C and over a water-density range of 0.2-0.6 g/cm3, and in subcritical water at 300 and 350 degrees C. The neat reaction (in the absence of solvent) is also studied for comparison at 0.1 M and 400 degrees C. The ether is found to decompose through (i) the proton-transferred fragmentation to ethane and acetaldehyde and (ii) the hydrolysis to ethanol. Acetaldehyde from reaction (i) is consecutively subjected to the unimolecular and bimolecular redox reactions: (iii) the unimolecular proton-transferred decarbonylation forming methane and carbon monoxide, (iv) the bimolecular self-disproportionation producing ethanol and acetic acid, and (v) the bimolecular cross-disproportionation yielding ethanol and carbonic acid. Reactions (ii), (iv), and (v) proceed only in the presence of hot water. Ethanol is produced through the two types of disproportionations and the hydrolysis. The proton-transferred fragmentation is the characteristic reaction at high temperatures and is much more important than the hydrolysis at densities below 0.5 g/cm3. The proton-transferred fragmentation of ether and the decarbonylation of aldehyde are slightly suppressed by the presence of water. The hydrolysis is markedly accelerated by increasing the water density: the rate constant at 400 degrees C is 2.5 x 10(-7) s(-1) at 0.2 g/cm3 and 1.7 x 10(-5) s(-1) at 0.6 g/cm3. The hydrolysis becomes more important in the ether reaction than the proton-transferred fragmentation at 0.6 g/cm3. In subcritical water, the hydrolysis path is dominant at 300 degrees C (0.71 g/cm3), whereas it becomes less important at 350 degrees C (0.57 g/cm3). Acetic acid generated by the self-disproportionation autocatalyzes the hydrolysis at a higher concentration. Thus, the pathway preference can be controlled by the water density, reaction temperature, and initial concentration of diethyl ether.     

Density functional theory study of formic acid adsorption on anatase TiO2(001): geometries, energetics, and effects of coverage, hydration, and reconstruction

We present density functional theory calculations and first-principles molecular dynamics simulations of formic acid adsorption on anatase TiO(2)(001), the minority surface exposed by anatase TiO(2) nanoparticles. A wide range of factors that may affect formic acid adsorption, such as coverage, surface hydration, and reconstruction, are considered. It is found that (i) formic acid dissociates spontaneously on unreconstructed clean TiO(2)(001)-1 x 1, as well as on the highly reactive ridge of the reconstructed TiO(2)(001)-1 x 4 surface; (ii) on both the 1 x 1 and 1 x 4 surfaces, various configurations of dissociated formic acid exist with adsorption energies of about 1.5 eV, which very weakly depend on the coverage; (iii) bidentate adsorption configurations, in which the formate moiety binds to the surface through two Ti-O bonds, are energetically more favored than monodentate ones; (iv) partial hydration of TiO(2)(001)-1 x 1 tends to favor the bidentate chelating configuration with respect to the bridging one but has otherwise little effect on the adsorption energetics; and (v) physical adsorption of formic acid on fully hydrated TiO(2)(001)-1 x 1 is also fairly strong. Comparison of the present results for formic acid adsorption with those for water and methanol under similar conditions provides valuable insights to the understanding of recent experimental results concerning the coadsorption of these molecules.     

In situ FTIR studies on the effect of temperature on the electro-oxidation of small organic molecules at the Ru(0001) electrode

The adsorption and electro-oxidation of formaldehyde, formic acid and methanol at the Ru(0001) electrode in perchloric acid solution have been studied as a function of temperature, potential and time using in situ FTIR spectroscopy, and the results interpreted in terms of the surface chemistry of the Ru(000 1) electrode and compared to those obtained during our previous studies on the adsorption of CO under the same conditions. It was found that no dissociative adsorption or electro-oxidation of methanol takes place at Ru(0001) at potentials < 900 mV vs. Ag/AgCl, and at all three temperatures employed, 10, 25 and 50 degrees C. However, both formaldehyde and formic acid did undergo dissociative adsorption, even at -200 mV, to form linear (CO(L)) and 3-fold-hollow (COH) binding CO adsorbates. In contrast to the adsorption of CO, it was found that increasing the temperature to 50 degrees C markedly increased the amount of CO adsorbates formed on the Ru(0001) surface from the adsorption of both formaldehyde and formic acid. On increasing the potential, the electro-oxidation of the CO adsorbates to CO2 took place via reaction with the active (1 x 1)-O oxide. Formic acid was detected as a partial oxidation product during formaldehyde electro-oxidation. At all three temperatures employed, it was found that adsorbed CO species were formed from the adsorption of both formic acid and formaldehyde, and were oxidised to CO2 faster than was observed in the experiments involving CO adsorbed from CO(g), suggesting a higher mobility of the CO adsorbates formed from the adsorption of the HCOOH and HCHO. At potentials > 1000 mV, both the oxidation of formic acid to CO2 and the oxidation of formaldehyde to both CO2 and formic acid were significantly increased, and the oxidation of methanol to CO2 and methyl formate was observed, all of which were attributed to the formation of an active RuO2 phase on the Ru(0001) surface.     

甲醇在纳米TiO2作用下进行光催化氧化反应的机理研究

以纳米TiO2为催化剂,以主波长为364 nm的汞灯为光源,用气相色谱法分别考察了0.1 mol/L的甲醇、甲醛和甲酸水溶液进行光催化氧化反应的动力学规律.Langmuir-Hinshelwood方程进行核算结果证明,该组反应均为零级反应.用TEM、 XRD、 SSA和XPS对催化剂进行表征.根据XPS的检测结果提出了甲醇光催化氧化的反应机理.TiO2光激发活化时间约为30～60 min,生成物及剩余反应物浓度随时间变化的曲线表明,该反应速率为HCH2OH相似文献   

Electrocatalytic mechanism and kinetics of SOMs oxidation on ordered PtPb and PtBi intermetallic compounds: DEMS and FTIRS study

The electrocatalytic activities and mechanisms of PtPb and PtBi ordered intermetallic phases towards formic acid, formaldehyde and methanol oxidation have been studied by DEMS and FTIRS, and the results compared to those for a pure polycrystalline platinum electrode. While PtPb exhibits an enhanced electrocatalytic activity for the oxidation of all three organic molecules when compared to a Pt electrode, PtBi exhibits an enhanced catalytic activity towards formic acid and formaldehyde oxidation, but not methanol. FTIRS data indicate that adsorbed CO does not form on PtPb or PtBi intermetallic compounds during the oxidation of formic acid, formaldehyde and methanol, and therefore their oxidation on both PtPb and PtBi intermetallic compounds proceeds via a non-CO(ads) pathway. Quantitative DEMS measurements indicate that only CO(2) was detected as a final product during formic acid oxidation on Pt, PtPb and PtBi electrodes. At a smooth polycrystalline platinum electrode, the oxidation of formaldehyde and methanol produces mainly intermediates (formaldehyde and formic acid), while CO(2) is a minor product. In contrast, CO(2) is the major product for formaldehyde and methanol oxidation at a PtPb electrode. The high current efficiency of CO(2) formation for methanol and formaldehyde oxidation at a PtPb electrode can be ascribed to the complete dehydrogenation of formaldehyde and formic acid due to electronic effects. The low onset potential, high current density and high CO(2) yield make PtPb one of the most promising electrocatalysts for fuel cell applications using small organic molecules as fuels.     

Aerobic oxidation of methanol to formic acid on Au20-: a theoretical study on the reaction mechanism

The aerobic oxidation of methanol to formic acid catalyzed by Au(20)(-) has been investigated quantum chemically using density functional theory with the M06 functional. Possible reaction pathways are examined taking account of full structure relaxation of the Au(20)(-) cluster. The proposed reaction mechanism consists of three elementary steps: (1) formation of formaldehyde from methoxy species activated by a superoxo-like anion on the gold cluster; (2) nucleophilic addition by the hydroxyl group of a hydroperoxyl-like complex to formaldehyde resulting in a hemiacetal intermediate; and (3) formation of formic acid by hydrogen transfer from the hemiacetal intermediate to atomic oxygen attached to the gold cluster. A comparison of the computed energetics of various elementary steps indicates that C-H bond dissociation of the methoxy species leading to formation of formaldehyde is the rate-determining step. A possible reaction pathway involving single-step hydrogen abstraction, a concerted mechanism, is also discussed. The stabilities of reactants, intermediates and transition state structures are governed by the coordination number of the gold atoms, charge distribution, cooperative effect and structural distortion, which are the key parameters for understanding the relationship between the structure of the gold cluster and catalytic activity in the aerobic oxidation of alcohols.     

Adsorption of gaseous formaldehyde and carboxylic acids by ammonium-ion-exchanged alpha-zirconium phosphate

Ammonium-ion-exchanged alpha-Zr(HPO(4))(2)H(2)O (alpha-ZrP) was obtained as a single phase with the interlayer distance of 9.4 A by the ion-exchange of proton with ammonium ion. The ammonium ion-exchanged alpha-ZrP could adsorb ill-smelling gases, such as formaldehyde and carboxylic acids (formic acid, acetic acid, propionic acid, and butyric acid). The adsorption amounts of carboxylic acids increased in the order, butyric acid相似文献   

Heterogeneous uptake and reactivity of formic acid on calcium carbonate particles: a Knudsen cell reactor, FTIR and SEM study

The heterogeneous uptake and reactivity of formic acid (HCOOH), a common gas-phase organic acid found in the environment, on calcium carbonate (CaCO(3)) particles have been investigated using a Knudsen cell reactor, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). FTIR measurements show that the adsorption of formic acid on the surface of calcium carbonate results in the formation of calcium formate. Besides calcium formate, carbonic acid is also a reaction product under dry conditions (<1% RH). Under dry conditions and at low pressures, the initial uptake coefficient of formic acid on CaCO(3) particles is measured to be 3 +/- 1 x 10(-3) and decreases as the surface saturates with adsorbed products. The maximum surface coverage of formic acid under dry conditions is determined to be (3 +/- 1)x 10(14) molecules cm(-2). Under humidified conditions (RH >10%), adsorbed water on the surface of the carbonate particles participates in the surface reactivity of these particles, which results in the enhanced uptake kinetics and extent of reaction of this organic acid on CaCO(3) as well as opens up several new reaction pathways. These reaction pathways include: (i) the water-assisted dissociation of carbonic acid to CO(2) and H(2)O and (ii) the formation of calcium formate islands and crystallites, as evident by SEM images. The results presented here show that adsorbed water plays a potentially important role in the surface chemistry of gas-phase organic acids on calcium carbonate particles.     

Reaction of thallium(III) salts with homoallylic alcohols: ring contraction vs. dimethoxylation

The oxidation of 2-(3,4-dihydronaphthalen-1-yl)-ethanol (1) with a variety of thallium(III) salts was investigated. An indan, formed by a ring contraction reaction, was obtained in good to moderate yields under a variety of reaction conditions: i) thallium triacetate (TTA) in aqueous AcOH; ii) thallium tris-trifluoroacetate (TTFA) in aqueous TFA; iii) TTFA in CH(2)Cl(2); iv) thallium tripropionate (TTP) in aqueous propionic acid and v) thallium tris-[(S)-(-)-triacetoxypropionate] in aqueous (S)-(-)-2-acetoxypropionic acid. On the other hand, the reaction of compound 1 with TTA in methanol led to a 2:1 mixture of the corresponding cis- and trans-dimethoxylated compounds, respectively.These compounds were formed by a thallium-promoted addition of methanol to the double bond.     

A versatile synthesis of pyrazolo[3,4-c]isoquinoline derivatives by reaction of 4-aryl-5-aminopyrazoles with aryl/heteroaryl aldehydes: the effect of the heterocycle on the reaction pathways

The reaction of 4-(3,4-dimethoxyphenyl)-5-aminopyrazoles 7A-D with aromatic and heterocyclic aldehydes in strong acidic media (trifluoroacetic or formic acid) has been studied. The initial azomethine derivatives 8 undergo cyclization similar to the Pictet-Spengler condensation to form the intermediate 4,5-dihydroisoquinolines 9 which readily dehydrogenate giving 5-aryl(heteroaryl)-pyrazolo[3,4-c]isoquinoline derivatives 10 as the final products. Whereas for benzaldehyde and its derivatives this one-pot synthesis presents a convenient general route to 5-aryl-pyrazolo[3,4-c]isoquinolines 10, in the case of heterocyclic aldehydes the product structure varies markedly with the structure of the aldehyde used: (i) 3-pyridyl-, 3-quinolyl-, 3-thienyl-, and 1,2,3-thiadiazolyl-5-carboxaldehydes give 5-heteroarylpyrazolo[3,4-c]isoquinolines; (ii) 1-methylbenzimidazolyl-2-carboxaldehyde gives only intermediate azomethine 8Dh, which does not cyclize; (iii) 1-R-3-indolylcarboxaldehydes (R = H, CH3, CH2Ph) eliminate the heteroaryl fragment resulting in 5-unsubstituted pyrazolo[3,4-c]isoquinolines 11. Thienyl-2-carboxaldehyde reacts by both pathways (i) and (iii) depending on the reaction conditions. The single crystal X-ray structures for 10Dj, 10Cd and 11D provide confirmation of the different types of products formed in these reactions. Mechanisms which explain these transformations are presented.     

First principles scheme to evaluate band edge positions in potential transition metal oxide photocatalysts and photoelectrodes

The positions of electronic band edges are one important metric for determining a material's capability to function in a solar energy conversion device that produces fuels from sunlight. In particular, the position of the valence band maximum (conduction band minimum) must lie lower (higher) in energy than the oxidation (reduction) reaction free energy in order for these reactions to be thermodynamically favorable. We present first principles quantum mechanics calculations of the band edge positions in five transition metal oxides and discuss the feasibility of using these materials in photoelectrochemical cells that produce fuels, including hydrogen, methane, methanol, and formic acid. The band gap center is determined within the framework of DFT+U theory. The valence band maximum (conduction band minimum) is found by subtracting (adding) half of the quasiparticle gap obtained from a non-self-consistent GW calculation. The calculations are validated against experimental data where possible; results for several materials including manganese(ii) oxide, iron(ii) oxide, iron(iii) oxide, copper(i) oxide and nickel(ii) oxide are presented.     

污染物甲醛为电子给体Pt/TiO2光催化制氢

研究了甲醛为电子给体在Pt/TiO2上光催化生成氢的反应。甲醛经光催化降解产生CO2和甲酸，甲酸可进一步被氧化；甲醛的光催化降解与放氢同时发生，催化剂的最佳Pt负载量为0．5％，甲醛浓度对反应的影响，表观上符合Langmuir-Hinshelwood关系式；碱性条件有利于该反应；在甲醛浓度较低时，甲醇的存在能部分地提高放氢速率，并讨论了可能的反应机理。     

Ethanol reforming on Co(0001) surfaces: a density functional theory study

A computational study using density functional theory is carried out to investigate the reaction mechanism of ethanol steam reforming on Co(0001) surfaces. The adsorption properties of the reactant, possible intermediates, and products are carefully examined. The reaction pathway and related transition states are also analyzed. According to our calculations, the reforming mechanism primarily consisting of dehydrogenation steps of ethanol, ethoxy, methanol, methoxy, and formic acid, is feasible on Co(0001) surfaces. It is also found that the reaction of formaldehyde yielding formic acid and hydrogen may not be an elementary reaction. The dehydrogenation of ethoxy possesses the highest barrier and is accordingly identified as the rate-determining step.     

Dehydrogenation,disproportionation and transfer hydrogenation reactions of formic acid catalyzed by molybdenum hydride compounds

The cyclopentadienyl molybdenum hydride compounds, Cp^RMo(PMe₃)_3–x(CO)_xH (Cp^R = Cp, Cp*; x = 0, 1, 2 or 3), are catalysts for the dehydrogenation of formic acid, with the most active catalysts having the composition Cp^RMo(PMe₃)₂(CO)H. The mechanism of the catalytic cycle is proposed to involve (i) protonation of the molybdenum hydride complex, (ii) elimination of H₂ and coordination of formate, and (iii) decarboxylation of the formate ligand to regenerate the hydride species. NMR spectroscopy indicates that the nature of the resting state depends on the composition of the catalyst. For example, (i) the resting states for the CpMo(CO)₃H and CpMo(PMe₃)(CO)₂H systems are the hydride complexes themselves, (ii) the resting state for the CpMo(PMe₃)₃H system is the protonated species [CpMo(PMe₃)₃H₂]⁺, and (iii) the resting state for the CpMo(PMe₃)₂(CO)H system is the formate complex, CpMo(PMe₃)₂(CO)(κ¹-O₂CH), in the presence of a high concentration of formic acid, but CpMo(PMe₃)₂(CO)H when the concentration of acid is low. While CO₂ and H₂ are the principal products of the catalytic reaction induced by Cp^RMo(PMe₃)_3–x(CO)_xH, methanol and methyl formate are also observed. The generation of methanol is a consequence of disproportionation of formic acid, while methyl formate is a product of subsequent esterification. The disproportionation of formic acid is a manifestation of a transfer hydrogenation reaction, which may also be applied to the reduction of aldehydes and ketones. Thus, CpMo(CO)₃H also catalyzes the reduction of a variety of ketones and aldehydes to alcohols by formic acid, via a mechanism that involves ionic hydrogenation.     

Total synthesis of (-)-diversifolin

First total synthesis of biologically active germacrane-type sesquiterpene (−)-diversifolin has been achieved. The features of the synthesis involve (i) ring-closing metathesis to give a 10-membered carbocycle, (ii) regioselective Mukaiyama aldol reaction of silyl dienol ether with formaldehyde at the α-position, and (iii) lactone transposition of the fully functionalized 11-oxabicyclo[6.2.1]undecane system.     

Adsorption of Methanol,Formaldehyde and Formic Acid on the Si(100)-2×1 Surface:A Theoretical Study

Small organic molecules on Si surface serve model systems in studies of the process of SiC, SiO and thin diamond films formation on the surfaces. We have applied the hybrid density functional B3LYP method in conjunction with cluster model approach and the ONIOM method1 to the study of methanol, formaldehyde and formic acid adsorption on the Si(100)-2×l surface.     

Synthesis and photocatalytic activity of rhodium-doped calcium niobate nanosheets for hydrogen production from a water/methanol system without cocatalyst loading

Rhodium-doped calcium niobate nanosheets were synthesized by exfoliating layered KCa(2)Nb(3-x)Rh(x)O(10-δ) and exhibited high photocatalytic activity for H(2) production from a water/methanol system without cocatalyst loading. The maximum H(2) production rate of the nanosheets was 165 times larger than that of the parent Rh-doped layered oxide. The quantum efficiency at 300 nm was 65%. In this system, the methanol was oxidized to formaldehyde (main product), formic acid, and carbon dioxide by holes, whereas electrons cause the reduction of water to H(2). The conductivity of the parent layered oxide was decreased by doping, which indicates the octahedral RhO(6) unit in the lattice of the nanosheet functions as an electron trap site. The RhO(6) units in the nanosheet probably also act as reaction sites for H(2) evolution.