Small-molecule analysis by surface-assisted laser desorption/ionization mass spectrometry

In order to meet the challenges facing modern chemistry, biology, and medicine, methods are required capable of performing rapid and reliable analysis of both individual compounds and complex mixtures at the molecular level. Matrix-assisted laser de-sorption/ionization mass spectrometry meets these requirements; however, some limitations complicate its application for the analysis of small molecules. Recently, small-molecule analysis has greatly progressed owing to development of surface-assisted laser desorption/ionization mass spectrometry involving approaches which combine the unique properties of nanostructured surface chemistry and morphology. This review examines such approaches and their specific application in small-molecule mass analysis.     

Oligonucleotide analysis by nanoparticle-assisted laser desorption/ionization mass spectrometry

We analyzed oligonucleotides by nanoparticle-assisted laser desorption/ionization (nano-PALDI) mass spectrometry (MS). To this end, we prepared several kinds of nanoparticles (Cr-, Fe-, Mn-, Co-based) and optimized the nano-PALDI MS method to analyze the oligonucleotides. Iron oxide nanoparticles with diammonium hydrogen citrate were found to serve as an effective ionization-assisting reagent in MS. The mass spectra showed both [M - H](-) and [M + xMe(2+)- H](-) (Me: transition metal) peaks. The number of metal-adducted ion signals depended on the length of the oligonucleotide. This phenomenon was only observed using bivalent metal core nanoparticles, not with any other valency metal core nanoparticles. Our pilot study demonstrated that iron oxide nanoparticles could easily ionize samples such as chemical drugs and peptides as well as oligonucleotides without the aid of an oligonucleotide-specific chemical matrix (e.g., 3-hydroxypicolinic acid) used in conventional MS methods. These results suggested that iron-based nanoparticles may serve as the assisting material of ionization for genes and other biomolecules.     

Analysis of cigarette smoke by laser desorption mass spectrometry

Laser desorption ionization Fourier transform ion cyclotron mass spectrometry (LDI–FTICRMS) has been successfully applied for the characterization of tobacco smokes. The versatily of analysis allows inorganic and organic tobacco smoke constituents to be identified. As a function of ion detection mode and laser irradiance experimental conditions, inorganic nitrate and sulfate as well as nicotine and associated nicotine, tobacco-specific nitrosamine, polycyclic aromatic hydrocarbon, polyoxygenated compounds are highlighted. The high mass resolution and the high mass accuracy attained by LDI–FTICRMS measurements allow the unambiguous assignment of detected species for m/z < 250 to be achieved.     

Unexpected complexation reaction during analysis of proteins using laser desorption spray post-ionization mass spectrometry

We describe complexation reactions of insulin and other proteins with metal ions generated from the substrate surface by laser irradiation in laser desorption spray post-ionization mass spectrometry (LDSPI-MS). This particular type of complexation reaction in LDSPI-MS was investigated for the first time, which indicated that the mechanistic process of LDSPI-MS might be much more complicated than that proposed before for similar methods.     

Gas-phase scrambling of disulfide bonds during matrix-assisted laser desorption/ionization mass spectrometry analysis

Evidence for photo-induced radical disulfide bond scrambling in the gas phase during matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is described. The phenomenon was observed during the analysis of tryptic peptides from insulin and was confirmed in the determination of disulfide bonds in the rhamnose-binding lectin SEL24K from the Chinook salmon Oncorhynchus tshawytscha. A possible mechanism for this surprising scrambling is proposed. Despite this finding, the disulfide bond pattern in SEL24K was assigned unambiguously by a multi-enzyme digestion strategy in combination with MALDI mass spectrometry. The pattern was found to be symmetrical in the tandem repeat sequence of SEL24K. To the best of our knowledge, this is the first report of disulfide bond scrambling in the gas phase during MALDI-MS analysis. This observation has important ramifications for unambiguous assignment of disulfide bonds.     

Surface analysis by laser desorption of neutral molecules with detection by fourier-transform mass spectrometry

Molecules chemisorbed on a platinum single crystal are desorbed by a pulsed laser, ionized by an electron beam or multiphoton ionization, and detected by Fourier-transform mass spectrometry (F.t.m.s.). Laser desorption of ethylene, methanol, cyanogen, benzene and naphthalene is described. In all cases, molecular ions are the major peaks observed in the mass spectra, and the minor peaks correspond to known electron-impact fragments of the adsorbates. For the systems investigated thus far, the laser-desorption F.t. mass spectra are less complex and esier to interpret than the spectra produced by secondary-ion mass spectrometry, which are complicated by the rapid ion/-molecule reactions that can occur directly above the surface between adsorbates and substrate atoms. In the laser-desorption method, these complications are avoided because the ions are formed after the desorbed molecules have moved away from the surface and have expanded into the vacuum. The sensitivity of the laser-desorption F.t.m.s. method is tested. For carbon monoxide adsorbed on platinum, the detection limit is ca. 5 × 10^?6 monolayer per cm². For naphthalene, a single laser pulse at 248 nm produces abundant molecular ions even when the electron beam is turned off. The ions appear to be produced by resonance-enhanced multiphoton ionization rather than a thermal process. In these experiments, multiphoton ionization of naphthalene at 248 nm is about 35-fold more sensitive than electron ionization.     

基体辅助激光解吸质谱法测定蛋白质分子量

本文叙述用自行研制成功的激光微探针飞行时间质谱仪及采用基体辅助激光解吸的新方法, 对溶菌酶、细胞色素C、肌红蛋白、胰蛋白酶、蛋白酶、白蛋白等多种蛋白质的分子量进行测定, 并对蛋白质混合物进行分析, 得一以满意的结果。此方法测定蛋白质分子量具有速度快(十分钟一个样品), 准确度高(±1%-0.1%), 灵敏度高(10^-^1^2～10^-^1^5mol)等优点, 是传统生物方法难以比拟的。     

Comparison of laser microprobe mass spectrometry and fast-atom-bombardment mass spectrometry for organic analysis

Both the techniques mentioned provide molecular weight and structural information, but laser microprobe mass spectrometry (LMMS) also provides greater control over the degree of fragmentation and enhanced sensitivity. In addition, LMMS allows microprobe analysis (i.e., spatial resolution of a few μm²) as well as providing quantitative measurements. The less energetic nature of fast-atom-bombardment mass spectrometry (FAB-MS) makes it more suitable for the analysis of highly labile polar compounds and high-mass biopolymers.     

Intact protein analysis by matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry

Direct tandem mass spectrometric (MS/MS) analysis of small, singly charged protein ions by tandem time-of-flight mass spectrometry (TOFMS) is demonstrated for proteins up to a molecular mass of 12 kDa. The MALDI-generated singly charged precursor ions predominantly yield product ions resulting from metastable fragmentation at aspartyl and prolyl residues. Additional series of C-terminal sequence ions provide in some cases sufficient information for protein identification. The amount of sample required to obtain good quality spectra is in the high femtomolar to low picomolar range. Within this range, MALDI-MS/MS using TOF/TOF trade mark ion optics now provides the opportunity for direct protein identification and partial characterization without prior enzymatic hydrolysis.     

Analysis of thin layers by means of spark-source mass spectrometry

Summary A device has been constructed with which the surface of a specimen can be scanned with a spark drawn from a fixed counter electrode. The mean depth of penetration is of the order of microns and limits of detection of 0.1 ppm are possible. Repeated scanning allows profile analysis, too.

---

Analyse dünner Schichten mit Hilfe der Funken-Massenspektrometrie

Zusammenfassung Eine Anordnung wurde konstruiert, mit der eine sich drehende Probenoberfläche durch eine feste Gegenelektrode abgetastet werden kann. Die mittlere Eindringtiefe pro Funkenentladung liegt in der Größenordnung von Mikrometern. Nachweisgrenzen von 0,1 ppm sind möglich. Durch wiederholtes Abtasten können auch Profilanalysen durchgeführt werden.

     

Applications of laser microprobe mass spectrometry in organic analysis

The ability to focus the laser accurately onto the sample with a small beam diameter (2.0–3.0 μm) enables laser mass spectrometry to be used as a microprobe. Results from a fully automated ion-mapping system for laser mass spectrometry are described. These results show that the spatial resolution of the laser microprobe is primarily limited by the diameter of the laser beam. Factors such as laser power density, laser focus, sample preparation, and chemical environment influence the reproducibility of laser mass spectra significantly. Calibration curves obtained in the analysis of mixtures of phenanthrolines demonstrate that laser mass spectrometry can be used to quantify organic components. Preliminary results on the detection of neutral molecules resulting from metastable decomposition in the flight tube are also presented.     

Analysis of copolymers by laser desorption fourier transform mass spectrometry

Journal of The American Society for Mass Spectrometry - A series of methylmethacylate/butylacrylate, methylmethacrylate/styrene, and poly-(ethylene glycol)/poly(propylene glycol) copolymers were...     

Analysis of oligodeoxynucleotides by negative-ion matrix-assisted laser desorption mass spectrometry

Thirty compounds were tested in combination with ammonium acetate for the ability to desorb and ionize oligodeoxynucleotides by ultraviolet matrix-assisted laser desorption mass spectrometry. Negative ion yields using matrices such as 2,5-dihydroxybenzoic acid and 3-hydroxy-4-methoxybenzaldehyde are enhanced by the addition of ammonium salts at a molar ratio of 1:1, pH 7. 3-Hydroxy-4-methoxybenzaldehyde was tested with 12 different ammonium, alkylammonium, and pyridinium salts for the ability to cocrystallize with oligodeoxynucleotides and to improve desorption and ionization. Ions of oligodeoxynucleotides 9, 10, and 11 nucleotides in length were observed with a matrix of 3-hydroxy-4-methoxybenzaldehyde and ammonium acetate, pH 7, at a mass resolution of 100–150 (fwhm). A small oligodeoxynucleotide (11-mer) was observed at the femtomole level with a combination of 2,5-dihydroxybenzoic acid and ammonium acetate as the matrix. Ions from single stranded DNA (60 nucleotides in length) were also observed using this same matrix combination. The results of these studies have shown that both sensitivity and desorption conditions need to be further improved before complex mixtures of large pieces of DNA can be effectively analyzed.     

Two-color laser desorption mass spectrometry using a single laser

A Nd: YAG laser has been used to perform IR desorption of analytes followed by UV ionization, all within the same laser pulse. At moderate laser powers, mass spectra recorded using this method are dominated by molecular ions.     

Laser desorption mass spectrometry on thin liquid jets

A recently developed soft desorption method for mass spectrometry is presented, which is called Laser Induced Liquid Beam Ionization/Desorption (LILBID). Analyte ions are desorbed from a thin jet of analyte solution directly into vacuum by means of an IR laser pulse, which has been tuned to a vibrational resonance of the solvent. A comparative experiment with ammonium chloride and aniline hydrochloride shows that ion formation via proton transfer takes place in the solution. Thermally unstable compounds, as well as supra- and biomolecular complexes, can be detected intact and mass analyzed in a reflectron time-of-flight (Re-TOF) mass spectrometer. During the desorption process, noncovalent interactions and some solvation characteristics are preserved. Three examples for the capacity of LILBID are given in this short overview: (a) ion-solvent interactions with the formation of a clathrate structure Cs⁺(H₂O)₂₀, (b) host-guest interactions with the K⁺ selectivity of valinomycin, and (c) noncovalent interactions with the dimerization of gramicidin. Received: 29 July 1997 / Revised: 4 September 1997 / Accepted: 12 September 1997     

Direct surface analysis of fungal species by matrix-assisted laser desorption/ionization mass spectrometry

In this study various methods of sample preparation and matrices were investigated to determine optimum collection and analysis criteria for fungal analysis by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Intact spores and/or hyphae of Aspergillus niger, Rhizopus oryzae, Trichoderma reesei and Phanerochaete chrysosporium were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The fungal samples were applied to the MALDI sample target as untreated, sonicated, or acid/heat treated samples, or blotted directly from the fungal culture with double-stick tape. Ferulic acid or sinapinic acid matrix solution was layered over the dried samples and analyzed by MALDI-MS. Statistical analysis showed that simply using double-stick tape to collect and transfer to a MALDI sample plate typically worked as well as the other preparation methods, and required the least sample handling.     

Multiphoton ionization spectroscopy in surface analysis and laser desorption mass spectrometry

The application of resonance-enhanced multiphoton ionization (REMPI) spectroscopy for the ultrasensitive detection of molecules originating from laser desorption experiments performed on a variety of substrates is reviewed. Laser-induced desorption from surfaces is capable of producing intact gas-phase molecules, even from polar, non-volatile, high-molecular-weight and thermally labile substances. REMPI is a highly efficient and optically selective ionization method, which, coupled with laser desorption allows the direct chemical analysis of complex mixtures, without the need for previous sample purification and separation steps. The use of REMPI spectroscopy is discussed in two contexts: (1) for the direct chemical analysis of complex mixtures, e.g., environmental samples, by laser desorption/laser postionization mass spectrometry and (2) for measurements of internal state distribution of molecules laser-desorbed from sub-monolayers surface films to gain insight into the laser desorption mechanism.Presented at the 13th International Symposium on Microchemical Techniques (ISM), held in Montreux, Switzerland, May 16–20,1994     

Ganglioside analysis by thin-layer chromatography matrix-assisted laser desorption/ionization orthogonal time-of-flight mass spectrometry

Metastable decomposition of ions generated in matrix-assisted laser desorption/ionization (MALDI) mass spectrometers complicates analysis of biological samples that have labile bonds. Recently, several academic laboratories and manufacturers of commercial instruments have designed instruments that introduce a cooling gas into the ion source during the MALDI event and have shown that the resulting vibrational cooling stabilizes these labile bonds. In this study, we compared stabilization and detection of desorbed gangliosides on a commercial orthogonal time-of-flight (oTOF) instrument with results we reported previously that had been obtained on a home-built Fourier transform mass spectrometer. Decoupling of the desorption/ionization from the detection steps resulted in an opportunity for desorbing thin-layer chromatography (TLC)-separated gangliosides directly from a TLC plate without compromising mass spectral accuracy and resolution of the ganglioside analysis, thus coupling TLC and oTOF mass spectrometry. The application of a declustering potential allowed control of the matrix cluster and matrix adduct formation, and, thus, enhanced the detection of the gangliosides.