Study of carbon nanotubes-HRP modified electrode and its application for novel on-line biosensors

In this paper, multi-walled carbon nanotubes (MWCNTs) were successfully immobilized on the surface of a glassy carbon electrode by mixing with horse-radish peroxidase (HRP). The electrochemical behavior of H2O2 was also studied with the MWCNTs-HRP modified electrode as a working electrode. The MWCNTs-HRP modified electrode showed excellent response of reduction current for the determination of H2O2 at the potential of -300 mV (vs. Ag/AgCl). We assembled the MWCNTs-HRP modified electrode in a thin-layer flow cell and the H2O2 solution was continuously introduced into the cell with a syringe pump. We optimized the sensitivity of the H2O2 sensor by adjusting the working potential and the pH of the buffer solution. The peak current increased linearly with the concentration of H2O2 in the range 3.0 x 10(-7) to approximately 2.0 x 10(-4) mol L(-1). The detection limit is 1.0 x 10(-7) mol L(-1) (S/N = 3). The interferences from ascorbic acid, uric acid and other electroactive substances can be greatly excluded since the sensor can be operated at -300 mV. Stability and reproducibility of the MWCNTs-HRP chemically modified electrode were also studied in this paper. Fabricated with glucose and lactate oxidase, the MWCNTs-HRP electrode was also applied to prepare the on-line glucose and lactate biosensors because of the high sensitivity for the determination of H2O2.     

Flow-through chemiluminescence sensor using immobilized oxidases for the selective determination of L-glutamate in a flow-injection system.

A selective and sensitive chemiluminometric flow sensor for the determination of L-glutamate in serum, based on immobilized oxidases such as glutamate oxidase (GOD), uricase (UC) and peroxidase (POD), is described herein. The principle for the selective chemiluminometric detection for L-glutamate is based on coupled reactions of four sequentially aligned immobilized oxidases, UC/POD/GOD/POD in a flow cell. The immobilized UC was employed to decompose urate, which is one of the major interfering components in serum for a luminol-H2O2 chemiluminescence reaction. The H2O2 produced from the UC reaction readily reacted with reducing components, such as ascorbate and glutathione, and then the excess H2O2 was decomposed by the immobilized POD. L-Glutamate in the sample plug was enzymatically converted to H2O2 with immobilized GOD. Subsequently, the peroxide reacts with luminol on the immobilized POD to produce chemiluminescence, proportional to glutamate concentration. The enzymes were immobilized on tresylated poly(vinyl alcohol beads). The immobilized enzymes were packed into TPFE tube (1.0 mm i.d. x 60 cm), in turn, and used as a flow cell. The sampling rate was 30 h-1. The calibration graph for L-glutamate is linear for 20 nM-5 microM; the detection limit (signal-to-noise = 3) is 10 nM.     

Potential-dependent chemiluminescence of luminol on the gold electrode modified with ferrocenylalkanethiol self-assembled monolayer

Self-assembled monolayer of ferrocenylundecanethiol (FcC11SH) on gold electrode was used for the potential-dependent catalyst for chemiluminescence of luminol. Ferrocene head groups adsorbed on gold were oxidized to ferricinium cation species electrochemically and catalyzed the chemiluminescence of luminol. As the redox state of ferrocene group can be regulated by electrode potential, chemiluminescence response can also be controlled electrochemically. The presented system was adopted for detection of glucose in the presence of glucose oxidase since the light emission was detected even in the neutral and weak acid solution.     

Glucose and lactate biosensors prepared by a layer-by-layer deposition of concanavalin A and mannose-labeled enzymes: electrochemical response in the presence of electron mediators.

An electrochemical response of glucose and lactate biosensors which were prepared by coating a platinum electrode with a thin film composed of concanavalin A and mannose-labeled glucose oxidase (GOx) or lactate oxidase (LOx) was evaluated in the presence of ferrocene derivatives as electron mediator. Both glucose and lactate biosensors showed catalytic current to glucose and lactate, respectively, in cyclic voltammetry, suggesting that the ferrocene derivatives can mediate electron transport smoothly from the reduced forms of GOx and LOx in the thin films to the electrode. Among the three kinds of ferrocene derivatives used, ferrocenylmethanol was found to be the most suitable electron mediator because of its low oxidation potential. The glucose and lactate sensors gave useful calibration graphs, in which higher detection limits were reached as compared with those observed when the sensors were operated in the absence of electron mediator.     

Droplet-based micro-flow chemiluminescence system for in vivo glucose determination by microdialysis sampling.

A micro-flow chemiluminescence (CL) system in vivo for glucose determination by the on-line microdialysis sampling is described in this paper. The micro-flow CL system uses discrete sample droplets, which formed at the tip of the capillary with the sampling volume of 4.5 microl. The sol-gel method is introduced to co-immobilize horseradish peroxidase (HRP) and glucose oxidase (GOD) on the inside surface of the micro-flow cell which was fabricated in polymethyl methacrylate (PMMA). The CL detection involved enzymatic oxidation of glucose to D-gluconic acid and H2O2, then H2O2 oxidizing luminol to produce CL in presence of HRP. The microdialysis probe was utilized for sampling in the rabbit blood; the sample throughput was 20 h(-1). The glucose level in blood of the rabbit was on-line monitored with good results.     

Co-immobilization of polymeric luminol,iron(II) tris(5-aminophenanthroline) and glucose oxidase at an electrode surface,and its application as a glucose optrode

The anodic polymerization of 3-aminophthalhydrazide (luminol) and iron(II) tris 5-aminophenanthroline (Fe(phen-NH2)3(2+)) has been reported in this paper. A bilayer electrode was developed based on these polymers and the ITO conductive glass (denoted ITO[Fe(phen-NH2)3(2+)]luminol electrode). This electrode emitted light (lambdaem: 430 nm) as it was brought into contact with H2O2. At pH 10, the resulting electrochemiluminescence (ECL) showed a linear relationship with the concentration of H2O2 in the range of 10 microM(-1) mM. This bilayer electrode also showed an application potential for the detection of glucose after being further modified with glucose oxidase (denoted ITO[Fe(phen-NH2)3(2+)]luminol]GOx electrode). Although the resulting ECL decayed more rapidly in concentrated glucose solutions (e.g., I M) because of the consumption of luminol during use, the decay became less severe in diluted glucose solutions (e.g., 10 mM). According to the flow injection analysis, a linear relationship existed between the ECL and the concentration of glucose from 10(-5)-10(-3) M at pH 9. The detection limit could reach a level of 5 x 10(-5) M at this pH.     

An electrochemiluminescence-based fibre optic biosensor for choline flow injection analysis

A fibre optic biosensor based on luminol electrochemiluminescence (ECL) integrated in a flow injection analysis (FIA) system was developed for the detection of choline. The electrochemiluminescence of luminol was generated by a glassy carbon electrode polarised at +425 mV vs. a platinum pseudo-reference electrode. Choline oxidase (Chx) was immobilised either covalently on polyamide (ABC type) or on UltraBind preactivated membranes, or by physical entrapment in a photo-cross-linkable poly(vinyl alcohol) polymer (PVA-SbQ) alone or after absorption on a weak anion exchanger, DEAE (diethylaminoethyl) Sepharose. The optimisation of the reaction conditions and physicochemical parameters influencing the FIA biosensor response demonstrated that the choline biosensor exhibited the best performances in a 30 mM veronal buffer containing 30 mM KCl and 1.5 mM MgCl2, at pH 9. The use of a 0.5 ml min-1 flow rate enabled the measurement of choline by the membrane-based ECL biosensors in 8 or 5 min, with ABC or UltraBind membranes, respectively, whereas the measurement required only 3 min with the DEAE-PVA system. For comparison, the detection of choline was performed with Chx immobilised using the four different supports. The best performances were obtained with the DEAE-PVA-Chx sensing layer, which allowed a detection limit of 10 pmol, whereas with the ABC, the UltraBind and the PVA systems, the detection limits were 300 pmol, 75 pmol and 220 pmol, respectively. The DEAE-based system also exhibited a good operational stability since 160 repeated measurements of 3 nmol of choline could be performed with an RSD of 4.5% whereas the stability under the best conditions was 45 assays with the other supports.     

Copolymerization of luminol on screen-printed cells for single-use electrochemiluminescent sensors

An efficient electrochemiluminescent (ECL) single-use sensor for H(2)O(2) is presented based on an electropolymerized film prepared on screen-printed gold electrode (gold SPE). A study of the copolymerization of luminol in the presence of different monomers was carried out. The polymeric films were grown potentiodynamically with a potential interval between -0.2 and 1.0 V in 0.2 M H(2)SO(4) and were characterized by their electrochemical, electrochemiluminescent, and superficial features. The polymer with the most efficient growth and ECL emission was poly(luminol-3,3',5,5'-tetramethylbenzidine) at 1:5 ratio. These prepared SPE cells present good mechanical and photoemissive properties. A semi-logarithmic linearization shows a noticeable four decade-width concentration range with a limit of detection (LOD) of 2.6 × 10(-9) M and a precision of 10.2% (n = 5; as relative standard deviation, RSD) in the medium range level. The described SPE ECL sensors will be useful for the determination of oxidase substrates in ECL single-use biosensors.     

Sensitive Nonenzymatic Electrochemiluminescence Determination of Hydrogen Peroxide in Dental Products using a Polypyrrole/Polyluminol/Titanium Dioxide Nanocomposite

A layer-by-layer assembled of a polypyrrole and polyluminol was synthesized through the electrodeposition of pyrrole and luminol in acidic medium on a graphite electrode. The electrode was then modified by casting titanium dioxide (TiO₂) nanoparticles on its surface for enhancing electrochemiluminescence of luminol. The properties of this electrochemiluminescence sensor were studied by cyclic voltammetry, electrochemical impedance spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The results demonstrated that the modification of this electrochemiluminescence sensor shows sensitive response for the determination of hydrogen peroxide. Figures of merit include broad linearity from 1?pmol L^?1 to 4?µmol L^?1 (R²?=?0.996) with a limit of detection as low as 0.40?pmol L^?1 at a signal-to-noise ratio of three and good reproducibility with relative standard deviation of 4% for the determination of a 400?nmol L^?1 hydrogen peroxide solution (n?=?4), along with favorable long-term stability. The presence of glucose, citric acid, uric acid, dopamine, and ascorbic acid at concentrations as high as 100?nmol L^?1 of H₂O₂ did not produce any electrochemiluminescence signals, which demonstrates the selective nature of this modified electrode. The sensor was also used for the determination of H₂O₂ in mouthwash formulations and dental whitelight gels.     

Polymeric FAD used as enzyme-friendly mediator in lactate detection

We present the fabrication and properties of lactate biosensors. The novel feature is the use of polymerized flavin adenine dinucleotide (FAD) as mediator for electron transfer. The biosensors were prepared using lactate dehydrogenase (LDH), lactate oxidase (LOX), or baker's yeast (BY) immobilized at the surface of the electrode. The sensors using purified enzymes showed good sensitivity, linearity, and stability. The sensitivity of the BY electrodes was slightly lower. The advantages of this type of sensors are discussed in connection with potential applications.     

Flow Injection Analysis of Glucose by Fiber Optic Chemiluminescence Measurement

Abstract

A flow injection system was developed for the determination of glucose based on fiber optic chemiluminescence measurements. The hydrogen peroxide produced from the glucose oxidase catalyzed reaction was quantified by measuring the intensity of luminol chemiluminescence in the presence of excess ferricyanide. Glucose oxidase was immobilized on aminopropyl glass using glutaraldehyde and packed in a reactor. The chemiluminescence was transported to the detector using an optical fiber. The system responds linearly to glucose in the concentration range 0.20 mM up to 2.5 mM, with a relative precision of 5%. Several fruit juices were analyzed for their glucose content and the results were compared with a standard AOAC procedure.     

The enhanced electrochemiluminescence of luminol on the nickel phthalocyanine modified electrode

A glassy carbon electrode (GCE) modified with nickel(II) tetrasulfophthalocyanine (NiTSPc) and Nafion was used for the investigation of the catalytic oxidation of luminol. The modified electrode was found to much more effectively improve the emission of electrochemiluminescence(ECL) of luminol in a solution containing hydrogen peroxide. The enhanced ECL signal corresponded to the catalytic oxidation of both luminol and H(2)O(2) by NiTSPc. Attached Ni(II) on GCE was oxidised to Ni(III) and then used as the catalyst for the chemiluminescence of luminol. The enhanced stability of the ECL signal with Nafion would mainly result from the prevention of the dissolution of NiTSPc and the adsorption of the oxidation product of luminol on the electrode surface. The proposed method enables a detection limit for luminal of 6.0 x 10(-8) mol L(-1) to be achieved in the presence of H(2)O(2) in the neutral solution. The enhanced ECL intensity had a linear relationship with the concentration of luminol in the range of 1.0 x 10(-7)-8.0 x 10(-6) mol L(-1).     

Immobilized Fullerene C60‐Enzyme‐Based Electrochemical Glucose Sensor

A mixed‐valence cluster of cobalt(II) hexacyanoferrate and fullerene C60‐enzyme‐based electrochemical glucose sensor was developed. A water insoluble fullerene C60‐glucose oxidase (C60‐GOD) was prepared and applied as an immobilized enzyme on a glassy carbon electrode with cobalt(II) hexacyanoferrate for analysis of glucose. The glucose in 0.1 M KCl/phosphate buffer solution at pH = 6 was measured with an applied electrode potential at 0.0 mV (vs Ag/AgCl reference electrode). The C60‐GOD‐based electrochemical glucose sensor exhibited efficient electro‐catalytic activity toward the liberated hydrogen peroxide and allowed cathodic detection of glucose. The C60‐GOD electrochemical glucose sensor also showed quite good selectivity to glucose with no interference from easily oxidizable biospecies, e.g. uric acid, ascorbic acid, cysteine, tyrosine, acetaminophen and galactose. The current of H₂O₂ reduced by cobalt(II) hexacyanoferrate was found to be proportional to the concentration of glucose in aqueous solutions. The immobilized C60‐GOD enzyme‐based glucose sensor exhibited a good linear response up to 8 mM glucose with a sensitivity of 5.60 × 10² nA/mM and a quite short response time of 5 sec. The C60‐GOD‐based glucose sensor also showed a good sensitivity with a detection limit of 1.6 × 10^‐6 M and a high reproducibility with a relative standard deviation (RSD) of 4.26%. Effects of pH and temperature on the responses of the immobilized C60‐GOD/cobalt(II) hexacyanoferrate‐based electrochemical glucose sensor were also studied and discussed.     

Flow-through micro sensor using immobilized peroxidase with chemiluminometric FIA system for determining hydrogen peroxide.

A micromachined flow cell (overall size; 25 x 25 x 1 mm3) was designed for the fast determination of hydrogen peroxide, based on a luminol-H2O2 chemiluminescence reaction catalyzed by immobilized peroxidase (POD). The flow cell consisted of a sandwich of anisotropically etched silicon and glass chips and contained a spiral channel (20 turns, 50 cm long, 150 microm wide, 20 microm depth, channel volume 1.4 microl) and two holes (1 mm diameter). POD was covalently immobilized with 3-(trimethoxysilyl)propyldietylenetriamine and glutaraldehyde on the inner surface of the channel. The chip was placed in front of a window of a photomultiplier tube and used as a flow cell in a single-line flow-injection analysis system using a luminol solution as a carrier solution. The sample volume for one measurement was 0.2 microl. The maximal sampling rate was 315 h(-1) at a carrier solution flow rate of 10 microl min(-1). A calibration graph for H2O2 was linear for 5 nM - 5 microM; the detection limit (signal-to-noise = 3) was 1 nM (7 fg in 0.2 microl injection). The H2O2 concentration in rainwater was determined using this sensor system.     

Direct electrochemistry of glucose oxidase immobilized on a hexagonal mesoporous silica-MCM-41 matrix

The direct electrochemistry of glucose oxidase (GOD) immobilized on a hexagonal mesoporous silica modified glassy carbon electrode was investigated. The adsorbed GOD displayed a pair of redox peaks with a formal potential of -417 mV in 0.1 M pH 6.1 phosphate buffer solution (PBS). The response showed a diffusion-controlled electrode process with a two-electron transfer coupled with a two-proton transfer reaction process. GOD immobilized on a hexagonal mesoporous silica retained its bioactivity and stability. In addition, the immobilized GOD could electrocatalyze the oxidation of glucose to gluconlactone by taking ferrocene monocarboxylic acid (FMCA) as a mediator in N(2) saturated solutions, indicating that the electrode may have the potential application in biosensors to analyze glucose. The sensor could exclude the interference of commonly coexisted uric acid, p-acetaminophenol and ascorbic acid and diagnose diabetes very fast and sensitively. This work demonstrated that the mesoporous silica provided a novel matrix for protein immobilization and the construction of biosensors.     

In-line determination of metabolites and milk components with electrochemical biosensors

Electrochemical biosensors for lactate, pyruvate and β-hydroxybutyrate based on oxygen, hydrogen peroxide, and NADH sensors coupled with oxidase and dehydrogenase enzymes were developed and used in conjunction with an artificial pancreas in experiments with extracorporeal circulation. Such procedures allow the fate of these species involved in glucose metabolism to be clarified during insulin treatment of diabetic patients. Studies with a glucose oxidase electrode for in-line determination of glucose produced by hydrolysis of cellobiose in a bioreactor are reported; for the determination of glucose in the presence of high concentrations of cellobiose, the purity of glucose oxidase is important in obtaining linear calibration plots. Impurities like amylase, maltase, invertase, and galactose oxidase, which are usually present in commercial preparations of glucose oxidase, must be absent. Another application is the amperometric determination of lactose, lactate and glucose in milk samples by using a hydrogen peroxide sensor coupled with β-galactosidase, lactate oxidase and glucose oxidase. The procedures outlined are simple and the short response times enable milk to be monitored during processing.     

Development of biosensors based on hexacyanoferrates

Ferric and copper hexacyanoferrates (PB and CuHCF, respectively) were electrodeposited on glassy carbon electrodes providing a suitable catalytic surface for the amperometric detection of hydrogen peroxide. Additionally glucose oxidase was immobilized on top of these electrodes to form glucose biosensors. The biosensors were made by casting glucose oxidase-Nafion layers onto the surface of the modified electrodes. The operational stability of the films and the biosensors were evaluated by injecting a standard solution (5 muM H(2)O(2) for PB, 5 mM H(2)O(2) for CuHCF and 2.5 mM glucose for both) over 5-10 h in a flow-injection system with the electrodes polarized at -50 (PB) and -200 mV (CuHCF) versus Ag/AgCl, respectively. The glucose biosensors demonstrated suitability for glucose determination: 0.0-2.5 mM (R(2)=0.9977) for PB and 0.0-10 mM (R(2)=0.9927) for CuHCF, respectively. The visualization of the redox catalyst modifiers (PB and CuHCF films) was presented by scanning electron micrographs.     

An electrochemiluminescent sensor for glucose employing a modified carbon nanotube paste electrode

A carbon nanotube paste (CNTP) electrode and a carbon nanotube paste/glucose oxidase (CNTP/GOx) electrode were prepared, and the electrochemiluminescent (ECL) behavior of luminol in the presence of glucose was investigated in detail at each of these electrodes. Compared to the classical carbon paste (CP) electrode, the CNTP electrode incorporating glucose oxidase greatly enhanced the response of the ECL sensor to glucose due to the electrocatalytic activity of the carbon nanotubes, the specificity of the enzymatic reaction, and the sensitivity of the luminol ECL reaction. Under optimal conditions, the electrode was found to respond linearly to glucose in the concentration range 1.0x10(-6) approximately 2.0x10(-3) mol/L, and the detection limit (defined as the concentration that can be detected at a signal-to-noise ratio of 3) was found to be a glucose concentration of 5.0x10(-7) mol/L. The method used to prepare the CNTP/GOx electrode was very convenient, and the electrode surface could be renewed in the case of fouling by simply polishing or cutting it to expose a new and fully active surface. The relative standard deviations (RSD) were found to be 6.8% and 8.9% for the CNTP electrode and the CNTP/GOx electrode (n=6). The electrode retained 95% of its initial response after two weeks.     

Enzyme-functionalized gold nanowires for the fabrication of biosensors

Gold nanowires were prepared by an electrodeposition strategy using nanopore polycarbonate (PC) membrane, with the average diameter of the nanowires about 250 nm and length about 10 microm. The nanowires prepared were dispersed into chitosan (CHIT) solution and stably immobilized onto glassy carbon electrode (GCE) surface. The electrochemical behavior of gold nanowire modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H(2)O(2)) were investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. Moreover, the good biocompatibility of nanometer-sized gold, the vast surface area of the nanowire-structure make it ideal for adsorption of enzymes for the fabrication of biosensors. Glucose oxidase was adsorbed onto the nanowire surface to fabricate glucose biosensor as an application example. The detection of glucose was performed in phosphate buffer (pH 6.98) at -0.2 V. The resulting glucose biosensor exhibited sensitive response, with a short response time (<8 s), a linear range of 10(-5)-2 x 10(-2) M and detection limit of 5 x 10(-6) M.     

Flow-injection determination of sugars with immobilized enzyme reactions and chemiluminescence detection

Glucose is determined by reaction with gluocose oxidase to produce hydrogen peroxide which is quantified via a chemiluminescence reaction with luminol. Sucrose, maltose, lactose and fructose are determined by enzymatic conversion to glucose (using invertase, amyloglucosidase, lactase. and glucose isomerase, respectively) and subsequent determination of the glucose, All enzymes are immobilized on controlled-pore glass and contained in flow-through reactors. For glucose, sucrose, and maltose the linear log-log working range 0.2 μM-1 mM, with a detection limit of 0.1 μM; for lactose and fructose the linear working range is 3 μM-1 mM with a detection limit of 1 μM. Assay time is 2 min.