Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.     

Controlling the Structural and Electrical Properties of Diacid Oligo(Phenylene Ethynylene) Langmuir–Blodgett Films

The preparation, characterization and electrical properties of Langmuir–Blodgett (LB) films composed of a symmetrically substituted oligomeric phenylene ethynylene derivative, namely, 4,4′‐[1,4‐phenylenebis(ethyne‐2,1‐diyl)]dibenzoic acid (OPE2A), are described. Analysis of the surface pressure versus area per molecule isotherms and Brewster angle microscopy reveal that good‐quality Langmuir (L) films can be formed both on pure water and a basic subphase. Monolayer L films were transferred onto solid substrates with a transfer ratio of unity to obtain LB films. Both L and LB films prepared on or from a pure water subphase show a red shift in the UV/Vis spectrum of about 14 nm, in contrast to L and LB films prepared from a basic subphase, which show a hypsochromic shift of 15 nm. This result, together with X‐ray photoelectron spectroscopic and quartz crystal microbalance experiments, conclusively demonstrate formation of one‐layer LB films in which OPE2A molecules are chemisorbed onto gold substrates and consequently ? COO? Au junctions are formed. In LB films prepared on a basic subphase the other terminal acid group is also deprotonated and associates with an Na⁺ counterion. In contrast, LB films prepared from a pure water subphase preserve the protonated acid group, and lateral H‐bonds with neighbouring molecules give rise to a supramolecular structure. STM‐based conductance studies revealed that films prepared from a basic subphase are more conductive than the analogous films prepared from pure water, and the electrical conductance of the deprotonated films also coincides more closely with single‐molecule conductance measurements. This result was interpreted not only in terms of better electron transmission in ? COO? Au molecular junctions, but also in terms of the presence of lateral H‐bonds in the films formed from pure water, which lead to reduced conductance of the molecular junctions.     

Supramolecular assemblies of a series of 2-arylbenzimidazoles at the air/water interface: in situ coordination, surface architecture and supramolecular chirality

The spreading behavior and supramolecular assemblies of some arylbenzimidazoles with 2-substituted aromatic groups such as phenyl, naphthyl, anthryl and pyrenyl on water surface and the subphase containing AgNO3 were investigated. It was observed that although these compounds lack long alkyl chains, they showed surface activity when spread from chloroform solution on water surface and formed the supramolecular assemblies. When AgNO3 was present in the subphase, a coordination between the imidazole group of the compounds and Ag(I) occurred in situ in the spreading film, which was verified by the surface pressure/area (pi-A) isotherms and UV/Vis absorption spectra. Both the spreading films from water and the aqueous AgNO3 subphase were transferred onto solid substrates and their surface morphologies as well as properties were characterized by AFM, UV/Vis absorption and CD spectra. Various surface morphologies such as nanoparticles, block domains and nanoutensils were observed depending on the substituted aromatic groups. Interestingly, although all of these compounds were achiral, supramolecular chirality was obtained for some of the arylbenzimidazole films assembled from either the water surface or the subphase containing AgNO3. It was revealed that chiral assemblies could be obtained from water surface for the benzimidazoles which have pyrenyl or alpha-naphthyl groups. For benzimidazole derivative with anthryl group, chiral assemblies could be obtained when spreading on the aqueous AgNO3 subphase. For the benzimidazoles with phenyl or beta-naphthyl groups, no chirality was obtained. It was suggested that both the overcrowded stacking of the aromatic groups and the cooperative arrangement of the molecules on water surface or aqueous AgNO3 subphase play a crucial role in forming the chiral supramolecular assemblies.     

"Two-point" assembling of Zn(II) and Co(II) metalloporphyrins derivatized with a crown ether substituent in Langmuir and Langmuir-Blodgett films

The effect of "two-point" interactions of Zn(II) and Co(II) metalloporphyrins, bearing 15-crown-5 ether peripheral substituents, on their assembling in Langmuir and Langmuir-Blodgett (LB) films was investigated. That is, simultaneously, the central metal ion of the porphyrin was axially ligated by a nitrogen-containing ligand in the emerged part of the Langmuir film on one hand, and a suitably selected cation pertaining in the subphase solution was supramolecularly complexed by the crown ether moiety in the submerged part of the film on the other. The compression and polarity properties of the Langmuir films of the derivatized free-base 5,10,15-triphenyl-20-(benzo-15-crown-5)porphyrin, H2(TPMCP), and the corresponding cobalt(II) and zinc(II) metalloporphyrins, denoted as Co(TPMCP) and Zn(TPCMP), respectively, as well as inclusion complexes of the metalloporphyrins with selected cations were investigated. For the axial ligation of Zn(II) and Co(II), pyrazine (pyz) and 4,4'-bipyridnine (bpy) aromatic as well as piperazine (ppz) and 1,4-diazabicyclo[2.2.2]octane (DABCO) cyclic heteroaliphatic ligands were selected. The films were formed on the water subphase solution in the absence and presence of LiCl, NaCl, or NH4Cl. The Langmuir films were built of monolayer J-type aggregates of tilted porphyrin macrocycles. The porphyrins formed rather labile complexes with the cations in the subphase. Nevertheless, the XPS analysis revealed that these cations were LB transferred together with the porphyrins onto solid substrates. In the Co(TPMCP) Langmuir films formed on the water subphases, Co(II) was complexed by aromatic but not cyclic heteroaliphatic ligands, while, in these films formed on the NaCl subphase solutions, the metalloporphyrin was also complexed by DABCO. In Langmuir films spread on alkaline subphase solutions, both aromatic and heteroaliphatic ligands formed complexes with Co(TPMCP) of different stoichiometries. The X-ray reflectivity and GIXD measurements performed on selected LB films revealed some structure-building effects of the axial ligation.     

由组分可控的LB膜前驱物法制备Y2O3稳定立方相ZrO2的超薄陶瓷膜

由有机LB膜技术发展了一种制备组分、厚度可控的无机超薄陶瓷膜的方法.以Zr、 Y的β-二酮络合物的作为"表面离子"代替传统的亚相离子,沉积它们与花生酸的混合LB膜.并将它作为前驱物,经臭氧处理和热处理,成功制得了Y2O3稳定的立方相ZrO2超薄膜(YSZ).用X射线衍射(XRD)、 X射线光电子能谱(XPS)等手段研究了YSZ薄膜的相结构和其组成.结果表明,超薄陶瓷膜中Zr与Y的含量比率控制得很好,且形成Y2O3稳定的立方相ZrO2.说明这种方法可以成功地用来制备组分和膜厚均可控的纳米陶瓷膜.     

Polymerization of a cysteinyl peptidolipid Langmuir film

The surface pressure-area isotherm of a cysteinyl peptidolipid on a pure water subphase (pH 5.8) was compared with that on a water subphase saturated with oxygen and buffered with ammonium bicarbonate (pH 7.8). A reduction of the limiting molecular area was observed for the isotherm measured on the subphase saturated with oxygen. Hysteresis in the compression-decompression cycles of the Langmuir film was also observed. Taking into consideration the chemical structure of the peptidolipid, we rationalized that the free sulfhydryl groups of the peptidolipid were oxidized in the presence of oxygen in the alkaline subphase to form intermolecular disulfide bonds at the air-water interface. The surface topography of the peptidolipid Langmuir film was observed by epi-fluorescence microscopy and the Langmuir-Blodgett film by environmental scanning electron microscopy (ESEM). The micrographs showed evidence of the polymerization of the cysteinyl peptidolipid at the air-water interface. Furthermore, the XPS spectra of the Langmuir-Blodgett films also proved the existence of disulfide bonds. The control peptidolipid C(18)-Ser-Gly-Ser-OH showed identical surface pressure-area isotherms in the presence or absence of an oxygen-saturated subphase.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Langmuir-Blodgett films and chiroptical switch of an azobenzene-containing dendron regulated by the in situ host-guest reaction at the air/water interface

An amphiphilic dendron containing an azobenzene ring at the focal point and the l-glutamate peripheral groups was designed. Its monolayer formation and host-guest reaction with cyclodextrins at the air/water interface and the properties of the transferred Langmuir-Blodgett (LB) films were investigated. The individual dendron, although without any long alkyl chains, could still form a stable monolayer at the air/water interface because of the good balance between hydrophilic and hydrophobic parts within the molecule. When cyclodextrin (CyD) was added to the subphase, a host-guest reaction occurred in situ at the air/water interface. The inclusion of the focal azobenzene moiety into the cavity of cyclodextrin decreased the packing of the aromatic ring and also led to the diminishment of the molecular area. Both the films formed at the surface of pure water and aqueous cyclodextrins were transferred onto solid substrates. Nanofiber structures were obtained for the film from the water surface as a result of the packing of the azobenzene groups, and circular domains were obtained for the film transferred from the aqueous CyD phases. The film transferred from the water surface showed an exciton couplet in the absorption band of azobenzene, whereas a negative Cotton effect was obtained for the film from CyD subphases. It was found that the supramolecular chirality in the LB film transferred from water was due to the transfer of the molecular chirality to the assemblies whereas that from the CyD subphase was due to the inclusion of azobenzene into the chiral cavity. Interestingly, the film from the water surface was photoinactive, whereas a reversible optical and chiroptical switch could be obtained for the film from the α-CyD subphase. The work provided a way to regulate the assembly and functions of organized molecular films by taking advantage of the interfacial host-guest reaction.     

Cd2+-induced interfacial structural changes of Langmuir-Blodgett films of stearic acid on solid substrates: a sum frequency generation study

The molecular structures and their stabilities at the outmost-layer of the Langmuir-Blodgett (LB) films of stearic acid on solid substrates have been investigated by a highly surface-sensitive spectroscopic technique, sum frequency generation (SFG), in air and in aqueous solution, using the combination of both normal and deuterated stearic acid. Peaks observed in the SFG spectra are mainly attributed to the terminal methyl group at the outmost layer of the LB films. The SFG spectra in air are virtually identical and are independent of the odd-even property and thickness (1-12) of the LB films, indicating that the even-numbered LB film changes its surface structure after passing through the interface between the water subphase and air, especially when the Cd2+ cation was included in the water subphase. Furthermore, we have demonstrated for the first time using in situ SFG measurement that the interfacial molecular structure at the LB bilayer of stearic acid on the hydrophilic substrates significantly change with immersion in the water subphase containing Cd2+ cation while such a structural change has not been observed in the water subphase without Cd2+. These results clearly indicate that a reorganization process takes place on the surface of the stearic acid bilayer induced by the Cd2+ cation. The electrostatic interaction between the carboxylate headgroup of stearic acid via the Cd2+ cation seems to play an important role in the surface reorganization process both in air and in solution.     

Langmuir-Blodgett Films and Calcium Ion Coordination of Biliverdin and Its Amphiphilic Derivatives

Up to now, the investigations of the chemistry of biliverdin and its analogs has been limited in organic solvents1-4. There is no report on organized molecular films of biliverdin and its derivatives. The structural organization and biophysical properties of biliverdin molecules in ordered molecular assemblies might be different from those in organic solvents, but similar to those in biological membranes in mammals. Therefore, biliverdin or its derivatives incorporated in ordered molecular fil…     

Fabrication of chiral Langmuir-Schaefer films of achiral amphiphilic Schiff base derivatives through an interfacial organization

Supramolecular chirality in the Langmuir-Schaefer (LS) films of two achiral amphiphilic Schiff bases, 2-(2'-benzimidazolyliminomethyl)-4-octadecyloxyphenol (BSC18) and 2-(2'-benzthiazolyliminomethyl)-4-octadecyloxyphenol (TSC18), was investigated. Both of these amphiphiles could form LS films from the water surface or coordinate with Ag(I) in the subphase to form Ag(I)-coordinated LS films. Although both of these amphiphiles were achiral, TSC18 formed a chiral LS film from the water surface, while BSC18 formed a chiral Ag(I)-coordinated LS film from the aqueous AgNO3 subphase. The supramolecular chirality in these LS films was suggested to be due to a cooperative stereoregular pi-pi stacking of the functional groups together with the long alkyl chains in a helical sense. The relationship between the chirality of the LS films and the molecular structures of TSC18 and BSC18 as well as their H-bond or coordination behaviors was discussed. The Schiff base films showed a reversible color change upon exposure to HCl and NH3 gas alternatively; however, the supramolecular chirality was irreversible during these processes.     

X-ray and neutron reflectometry study of glow-discharge plasma polymer films

Radio-frequency glow-discharge plasma polymer thin films of allylamine (AA) and hexamethyldisiloxane (HMDSO) were prepared on silicon wafers and analyzed by a combination of X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), X-ray reflectometry (XRR), and neutron reflectometry (NR). AFM and XRR measurements revealed uniform, smooth, defect-free films of 20-30 nm thickness. XPS measurements gave compositional data on all elements in the films with the exception of hydrogen. In combination with XRR and NR, the film composition and mass densities (1.46 and 1.09 g cm(-)(3) for AA and HMDSO, respectively) were estimated. Further NR measurements were conducted with the AA and HMDSO films in contact with water at neutral pH. Three different H(2)O/D(2)O mixtures were used to vary the contrast between the aqueous phase and the polymer. The amount of water penetrating the film, as well as the number of labile protons present, was determined. The AA film in contact with water was found to swell by approximately 5%, contain approximately 3% water, and have approximately 24% labile protons. The HDMSO polymer was found to have approximately 6% labile protons, no thickness increase when in contact with water, and essentially no solvent penetration into the film. The difference in the degree of proton exchange within the films was attributed to the substantially different surface and bulk chemistries of the two films.     

Sum-frequency spectroscopy analysis of two-component langmuir monolayers and the associated interfacial water structure

Sum-frequency spectroscopy (SFS) in the CH and OH stretching regions was employed to obtain structural information about Langmuir monolayers on the H(2)O subphase of the model lipid dioctadecyldimethylammonium bromide (DOMA) and of the neutral surfactant methyl stearate (SME) and their mixtures and about the interfacial water structure underneath the films. These results were compared with the sum-frequency spectra of the interface between Langmuir monolayers of stearic acid and stearic acid-DOMA monolayers and water to prove that the uncompensated headgroup charge of DOMA at the interface is the reason for structuring of interfacial water close to the studied monomolecular films. Sum-frequency spectra on D(2)O subphase were also studied to account for the interference between the CH and OH spectral signatures because of the coherent nature of the SFS signals. Interfacial water structure proved to be a determining factor in the behavior of the mixed lipid monolayers. A mixing induced amplification in the surface potential DeltaV observed in our previous work was explained with total increase of the dipole moment for the mixed films, bigger than the arithmetic average for DOMA and SME monolayers alone. The increase is due to the better packing of the molecules in the mixed films and to the decrease in the interfacial water dipole moment arising from a more disordered water structure underneath the mixed monolayers.     

Copper(II) ion induced monolayer formation of p-tert-butylthiacalix[4]arene at the air-water interface.

The monolayer properties of p-tert-butylthiacalix[4]arene (TCA) at the air-water interface was investigated by the measurements of surface pressure-area isotherms. However, TCA only exists as a trimmer aggregate on the subphase of deionized water. Copper(II) ion in the subphase can induce the monolayer formation of TCA. The UV-Vis spectra and FTIR spectra of the transferred films suggested that the monolayer forrmation was fulfilled through the coordination of copper(II) ion to TCA at the air-water surface.     

Supramolecular assemblies of a new series of gemini-type schiff base amphiphiles at the air/water interface: in situ coordination, interfacial nanoarchitectures, and spacer effect

Great interest has been devoted to the gemini amphiphiles because of their unique properties. In this article, we report some interesting properties of the interfacial films formed by a series of newly designed gemini amphiphiles containing the Schiff base moiety. This novel series of gemini amphiphiles with their Schiff base headgroups linked by a hydrophobic alkyl spacer (BisSBC18Cn, n = 2, 4, 6, 8, 10) could be spread to form stable monolayers and coordinated with Cu(Ac)(2) in situ in the monolayer. The alkyl spacer in the amphiphiles has a great effect on the regulation of the properties of the Langmuir monolayers. A maximum limiting molecular area was observed for the monolayers of the gemini amphiphile with the spacer length of hexa- or octamethylene groups. Both the monolayers on water and on the aqueous Cu(Ac)(2) subphase were transferred onto solid substrates, and different morphologies were observed for films with different spacers. Nanonail and tapelike morphologies were observed for amphiphile films with shorter spacers (n = 2 and 4) on the water surface. Wormlike morphologies were observed for gemini films with longer spacers of C(8) and C(10) when coordinated with Cu(Ac)(2). An interdigitated layer structure was supposed to form in the multilayer films transferred from water or the aqueous Cu(Ac)(2) subphase.     

Surface potentials and ionization equilibrium in Y-type deposition of multiple Langmuir-Blodgett films I. Effect of pH and counterions

Conditions for depositions of multiple LB films for different divalent cations were determined experimentally at the pK(A) of the system. The pK(A) of the fatty acid-subphase salt system is the pH at which half of the fatty acid heads are dissociated. Stable Y-type depositions take place in full immersion/removal cycles. Under certain conditions, full depositions occur only during the downstroke (X-type) or during the upstroke (Z-type). Experiments show a clear trend between pK(A) of the system and loss of stability of Y-depositions toward full depositions taking place during immersion only, i.e., YX transitions. Stable Y-type depositions can be achieved for most divalent cations at large dipping speeds. Dipping speed necessary to maintain stable Y-depositions depend on the pK(A) of the system; the lower the pK(A) the larger the dipping speed. The accumulated time spent by the solid substrate under the water subphase is not a good indicator of YX transition because the number of dipping cycles is also a relevant variable. For a given number of cycles, the lower regions of the solid substrate are most affected by transition because they spent a larger time under the water subphase.     

Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media

The miscibility, mechanical and morphological properties of mixed Langmuir and Langmuir-Blodgett monolayers prepared from the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and the perfluorinated fatty acid perfluorooctadecanoic acid have been studied as a function of film composition and subphase salinity. It was demonstrated here, for the first time, that the extent of surfactant miscibility in mixed phospholipid-perfluoroacid monolayers, and hence the resulting mechanical properties of the monolayer film, can be controlled by altering the concentration of sodium ions in the underlying subphase. Elevated Na(+) concentrations resulted in lower net attractive interactions between film components, likely through specific ion adsorption to the negatively-charged perfluoroacid, along with decreased film elasticities. These results differ significantly from conventional fatty-acid-carboxylate monolayer systems in which film cohesion is typically enhanced through adsorption of cations to surfactant headgroups. Atomic force microscope images of films deposited onto solid mica substrates revealed that the films deposited from pure water formed multimolecular aggregates of surfactant, which could be attributed to the highly cohesive nature of the films, but the use of salt in the subphase diminished aggregate formation and resulted in the production of homogeneous monolayer films.     

Effect of compression of a stearic acid monolayer on interfacial binding of copper ions and cluster formation

The effect of compression of a stearic acid Langmuir monolayer on the interaction of copper ions with the monolayer and on the formation of interface clusters has been studied as functions of pH and ionic content of the water subphase. Copper binding was estimated by direct electron paramagnetic resonance measurements of ion concentrations in the water subphase. A scanning tunnelling microscopy study of monolayer Langmuir-Blodgett films, deposited on graphite substrates, gave evidence for the formation of nanosized clusters on the monolayer surface. The data obtained showed that the interaction of the monolayer with copper ions and the accompaning cluster formation processes were determined by the arrangement, order and mobility of the stearic acid molecules in the monolayer and the electrostatics at the interface.     

Mixed Langmuir and Langmuir-Blodgett films of a proton sponge and a fatty acid: influence of the subphase nature on the interactions between the two components

The H+ acceptor activity of a proton sponge, namely, diphenyl bis(octadecylamino)phosphonium bromide, has been studied at the air-liquid interface using several subphases. Mixed Langmuir and Langmuir-Blodgett (LB) films containing the proton sponge and a fatty acid (behenic acid) in the whole composition range have been prepared. Surface pressure versus area per molecule isotherms were recorded and excess Gibbs energies of mixing calculated. The existence of strong interactions between the proton sponge and the fatty acid is observed when the subphase is either pure water or a NaOH aqueous solution. A stoichiometric 1:1 reaction between both molecules takes place at the air-water interface. This reaction has an efficiency close to 100% at high surface pressures, provided the majority anion present in the subphase is OH-. However, when the majority anion is another one, this complex is hardly formed. From the experimental results, we conclude that the acid-base reaction is highly dependent on the protonation state of the proton sponge at the air-liquid interface that is a function of the present counterion in the subphase. The floating films were also transferred onto solid substrates and characterized by means of IR spectroscopy, atomic force microscopy (AFM), and X-ray diffraction to investigate in more detail the complex formation. The interactions between the complex (when formed) and the excess component have been studied in terms of the subphase nature. It was found that the complex is immiscible with the proton sponge, yielding films made of different domains. Nevertheless, the complex is miscible with the fatty acid when the subphase used is an alkaline solution, presumably due to electrostatic interactions between the carboxylate group of the acid and the complex.     

Design and interfacial assembly of a new series of gemini amphiphiles with hydrophilic poly(ethyleneamine) spacers

A new series of gemini amphiphiles containing two Schiff base moieties linked by the poly(ethyleneamine) with different lengths were designed, and their interfacial assemblies were investigated. Condensed monolayers were obtained on nearly neutral subphase where the hydrophilic spacers were found to immerse into the subphase. On strong alkaline and acidic subphase, the headgroup and the spacer of the gemini amphiphiles underwent dissociation and protonation, respectively, resulting in the enlargement of the molecular areas. Flat and uniform domains were obtained for the monolayers from nearly neutral subphase; flower-like or dendritic domains were observed for the films transferred from strong acidic subphase. On the other hand, when an anionic tetrakis(4-sulfonatonphenyl)porphine (TPPS) was added into an acidic subphase, an in situ complex formation between the gemini amphiphiles and TPPS occurred. The complex monolayers were transferred onto solid substrate and TPPS existed predominantly as J-aggregate in the complex films. Due to the multisited positive charges in the spacer on acidic subphase, the complex films of gemini amphiphiles with TPPS appeared as short fiber or nanorod structures and formed two-dimensional (2D) conglomerate chiral domains.