Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.     

Bis(saccharinato)palladium(II) and platinum(II) complexes with 2,2′-bipyridine: Syntheses,structures, spectroscopic,fluorescent and thermal properties

New palladium(II) and platinum(II) complexes, cis-[Pd(bpy)(sac)₂] (1) and cis-[Pt(bpy)(sac)₂] (2), where sac = saccharinate, bpy = 2,2′-bipyridine, have been synthesized and characterized by elemental analysis, UV–Vis, IR, ¹H NMR and ¹³C NMR. The structures of the DMSO solvated complexes are determined by X-ray diffraction. Both complexes are isomorphous and the metal ions are coordinated by two N-bonded sac ligands, and two nitrogen atoms of pyridyl groups of bpy in a cis fashion. The mononuclear species interact each other through weak intermolecular C–H?O hydrogen bonds, C–H?π and π?π interactions leading to three-dimensional supramolecular networks. All complexes exhibit a high thermal stability in the solid state, and are fluorescent in the solution.     

Synthesis,structures and NLO properties of five non-centrosymmetric coordination compounds from the copper(II)/dps system (dps = 4,4′-dipyridyl sulfide)

The formation, crystal structure and properties of five copper(II) coordination compounds with the angular ligand, 4,4′-dipyridyl sulfide (dps) are described, {[Cu₃(μ-dps)₄(μ-SO₄)₂(SO₄)(H₂O)₅] · 10H₂O}_∞ (1 · 10H₂O), [Cu(dps)₄(H₂O)₂] · (ClO₄)₂ · H₂O (2 · H₂O), {[Cu(μ-dps)₂(DMF)₂](ClO₄)₂}_∞ (3), {[Cu(μ-dps)₂(H₂O)₂] · (NO₃)₂ · 2H₂O}_∞ (4 · 2H₂O) and {[Cu₃(μ-dps)₆(DMF)₂(H₂O)₄] · (NO₃)₆ · (DMF) · 6H₂O}_∞ (5 · DMF · 6H₂O). The topological architectures of all these coordination compounds are strongly dependent on the counteranions, with the aid of guest solvents, and include a chiral 3D non-interpenetrated structure for 1, an acentric mononuclear structure for 2, acentric 2D undulating networks for 3 and 5, and a chiral 1D double-stranded chain for 4. In particular, all these acentric or chiral coordination architectures are generated from an achiral ligand as a building unit, and their second-order non-linear optical (NLO) properties are also studied in this paper.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Synthesis,characterization, and crystal structure determination of Cu(II) coordination compounds with 2,2′-dimethyl-4,4′-bithiazole

[{CuCl(dm4bt)}₂ μ-Cl)₂] (1) (dm4bt = 2,2′-dimethyl-4,4′-bithiazole) was prepared from the reaction of CuCl₂ · 2H₂O with 2,2′-dimethyl-4,4′-bithiazole in methanol; [Cu(dm4bt)₂NO₃](NO₃) (2) was prepared from the reaction of Cu(NO₃)₂ · 3H₂O with 2,2′-dimethyl-4,4′-bithiazole in methanol. Both complexes were characterized by IR, UV–Vis spectroscopy, and single-crystal structure. The structure of 1 consists of centrosymmetric dimeric [{CuCl(dm4bt)}(μ-Cl)], in which two chloro ligands bridge the coppers forming a four-membered ring; a terminal chloride and a bidentate chelating bithiazole complete five coordination at each Cu(II) in a highly distorted trigonal-bipyramidal geometry. The mononuclear structure 2 consists of a Cu(II), two 2,2′-dimethyl-4,4′-bithiazoles, one monodentate nitrate and one uncoordinated nitrate in a highly distorted square pyramid.     

Synthesis, characterization, and the role of counterion in stabilizing trigonal pyramidal copper(I)/2,2′bipyridine complexes containing electron-poor methyl acrylate

Copper(I)/2,2′-bipyridine complexes, [Cu^I(bpy)(π-CH₂CHCOOCH₃)][A] have been synthesized and characterized. These complexes are used in copper(I) mediated cyclopropanation and aziridination reactions of methyl acrylate and represent the first class of trigonal pyramidal copper(I) complexes with π-coordinated electron poor olefins. In the case of 1 and 3, weak coordination of the counterion was observed. The counterion was noncoordinating in complex 2, which was dimeric in the solid state with the oxygen atoms of the carbonyl moieties in methyl acrylate bridging two copper(I) centers.     

Acetato and formato copper(II) paddle-wheel complexes with nitrogen ligands

Compounds Cu(AcO)₂(pydz) (1), Cu(HCOO)₂(pymd)_1/2 (2), Cu(AcO)₂(pymd)_1/2 (3), and Cu(AcO)₂(4,4′-bipy)_1/2 (4) were obtained by reactions of Cu(AcO)₂?H₂O and Cu(HCOO)₂ ? 4H₂O with pyridazine, pyrimidine, or 4,4′-bipyridine. In all the studied structures, the paddle-wheel units [Cu₂[µ-RCOO)₄] are present. Coppers show a square pyramidal coordination determined by four oxygens in the equatorial positions and a nitrogen in the axial position. Compound 1 consists of centrosymmetric dimeric molecules. Compounds 2 and 3 instead consist of zig-zag chains of [Cu₂[µ-RCOO)₄] units linked by bridging pyrimidine molecules. The chains run in the (1 0 1) and (1 1 ?2) directions in 2 and 3, respectively. By crystallization of a solution of 4 in chloroform, Cu(AcO)₂(4,4′-bipy)_1/2 ? 1/2CHCl₃ (5) was obtained. It consists of monodimensional chains of [Cu₂(µ-CH₃COO)₄] units linked by bridging 4,4′-bipy molecules. The chains, of two different types, run parallel to the b-axis in the crystal. Two chlorines of each CHCl₃ molecule are close to two oxygens of two parallel chains. The packing can be described as sheets parallel to the (1 0 ?1) plane. Magnetic properties and electron paramagnetic resonance spectra have been studied.     

Synthesis,characterization, crystal structures,and superoxide dismutase activity of copper(II) octahedral complexes containing tri- and monodentate ligands

Three new copper(II) complexes [Cu(PSBP)₂](NO₃)(BF₄) (1), [Cu(DAPBMA)₂](BF₄)₂ (2), and [Cu(ImH)₄(NO₃)₂] (3), where PSBP = 4-phenylsemicarbazide-2-benzoylpyridine, DAPBMA = 2,6-diacetylpyridine-bis-4-methoxyaniline, and ImH = Imidazole, have been synthesized and characterized by elemental analysis, FAB mass spectrometry, magnetic susceptibility, X-band electron paramagnetic resonance (EPR), electronic spectroscopy, and cyclic voltammetry. Frozen solution EPR spectra of the complexes have axial features with g _∥ > g _⊥ > 2.003 suggesting the presence of a d _{x ²? y ²} ground state. Single crystal X-ray analyses of 1–3 reveal the presence of distorted octahedral geometry. All complexes exhibit significant superoxide dismutase activity.     

Self-assembling dicopper(II) complexes of di-2-pyridyl ketone Schiff base ligands derived from S-alkyldithiocarbazates

Condensation of di-2-pyridyl ketone with S-methyldithiocarbazate or S-benzyldithiocarbazate yields potentially bridging ligands of the form Py₂CNNHC(S)SR; Hdpksme (R = Me; the di-2-pyridyl ketone Schiff base of S-methyldithiocarbazate) and Hdpksbz (R = Bz; the di-2-pyridyl ketone Schiff base of S-benzyldithiocarbazate). Complexation of these ligands with Cu(II) in a 1:1 M ratio leads to the formation of dinuclear complexes of the general formula [Cu(NNNS)X]₂ (X = Cl⁻, NO₃⁻, H₂O). X-ray crystallographic structure determinations show that each ligand provides three donor atoms (NNS) in a meridional configuration to one metal, viz. one of the pyridine nitrogen atoms, the azomethine nitrogen atom and the thiolate sulfur, while the nitrogen atom of the second pyridyl group forms a bridge to another copper(II) ion within the dimer. The coordination geometry around each copper(II) ion is approximately square pyramidal, the basal plane of which is composed of one of the pyridine nitrogen atoms, the azomethine nitrogen atom and a chlorido, nitrato or aqua ligand. The apical position of the square pyramid is always occupied by the pyridine nitrogen atom of the second ligand.     

Syntheses and crystal structures of copper(II) complexes derived from 2,4,6-tris(2-pyridyl)-1,3,5-triazine

Treatment of freshly precipitated Cu(OH)₂?·?xH₂O and 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) with oxalic and malonic acids in methanol-water at room temperature gave [Cu(tptz)(C₂O₄)(H₂O)]?·?4H₂O (1) and [Cu(pma)(C₃H₂O₄)(H₂O)]?·?H₂O (2) (pma?=?2-aminocarbonylpyridine), respectively. Reaction in the absence of any acid resulted in [Cu(bpca)(tca)]?·?2H₂O (3) (bpca?=?bis(2-pyridylcarbonyl)amide anion; tca?=?2-pyridinecarboxylate anion). Complex 1 consists of [Cu(tptz)(C₂O₄)(H₂O)] and lattice H₂O molecules; the tridentate tptz ligand, bidentate oxalate dianion and an aqua ligand are bound to Cu with distorted octahedral geometry. Complex 2 is composed of [Cu(pma)(C₃H₂O₄)(H₂O)] and lattice H₂O molecules; the bidentate 2-aminocarbonylpyridine ligand, a bidentate malonate dianion and an aqua ligand are coordinated to Cu with a slightly distorted square pyramidal geometry. Complex 3 consists of [Cu(bpca)(tca)] and lattice H₂O molecules. Square pyramidally coordinated Cu atoms are surrounded by tridentate bpca with nitrogen donor atoms and a bidentate 2-pyridinecarboxylate anion.     

Sensitive chemically amplified electrochemical detection of ruthenium tris-(2,2′-bipyridine) on tin-doped indium oxide electrode

Optimized combination of chemical agents was selected for sensitive electrochemical detection of dissolved ruthenium tris-(2,2′-bipyridine) (Ru-bipy). The detection was based on the chemical amplification mechanism, in which the anodic current of a redox-active analyte was amplified by a sacrificial electron donor in solution. On indium-doped tin oxide (ITO) electrodes, electrochemical reaction of the analyte was reversible, but that of the electron donor was greatly suppressed. Several transition metal complexes, such as ferrocene and tris-(2,2′-bipyridine) complexes of osmium, iron and ruthenium, were evaluated as model analyte. A correlation between the amplified current and the standard potential of the complex was observed, and Ru-bipy generated the largest current. A variety of organic bases, acids and zwitterions were assessed as potential electron donor. Sodium oxalate was found to produce the largest amplification factor. With Ru-bipy as the model analyte and oxalate as the electron donor, the analyte concentration curve was linear up to 50 μM, with a lower detection limit of approximately 50 nM. Preliminary work was presented in which a Ru-bipy derivative was attached to bovine serum albumin and detected electrochemically. Although the combination of Ru-bipy, oxalate and ITO electrode has been used before for electrochemiluminescent detection of Ru-bipy and oxalate, as well as electrochemical detection of oxalate, its utility in amplified voltammetric detection of Ru-bipy as a potential electrochemical label has not been reported previously.     

A novel tris(2,2′-bipyridine)ruthenium(II)/tripropylamine cathodic electrochemiluminescence in acetonitrile for the indirect determination of hydrogen peroxide

A novel tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) cathodic electrochemiluminescence (ECL) was generated at −0.78 V at the Pt electrode in acetonitrile (ACN), which suggested that the cathodic ECL differed from conventional cathodic ECL. It was found that tripropylamine (TPrA) could enhance this cathodic ECL and the linear range (log-log plot) was 0.2 μM-0.2 mM. In addition, hydrogen peroxide (H₂O₂) could inhibit the cathodic ECL and was indirectly detected with the linear range of 27-540 μM. The RSD (n = 12) of the ECL intensity in the presence of 135 μM H₂O₂ was 0.87%. This method was also demonstrated for the fast determination of H₂O₂ in disinfectant sample and satisfactory results were obtained.     

Synthesis, characterization and crystal structure determination of zinc (II) and mercury (II) complexes with 2,2′-dimethyl-4,4′-bithiazole

The 2,2′-dimethyl-4,4′-bithiazole ligand (1), (dm4bt), and its Zn and Hg complexes have been prepared. A conformational property calculation at the DFT level for the ligand shows the anti conformation is energetically more stable by about 22.83 kJ/mol and the rotational barrier is about 32.01 kJ/mol for the anti → syn conversion, a phenomena happening during complex formation. The complexes [Zn(dm4bt)Cl₂] (2) and [Hg(dm4bt)Cl₂] (3) have spectral properties typical for d¹⁰ metal diimine systems. The structures of the ligand and the two complexes have been determined by the single crystal diffraction method. The X-ray structure determinations show that both complexes are four coordinated by two chloride atoms and one bidentate dm4bt. In the Hg complex one of the two chlorides is set at a semi-bridging position.     

Synthesis,crystal structure and hydrolysis of a dinuclear copper(II) complex constructed by N2O donor Schiff base and 4,4′-bipyridine: Discrete supra-molecular ensembles vs. oligomers

The tridentate Schiff base ligand, 7-amino-4-methyl-5-aza-3-hepten-2-one (HAMAH), prepared by the mono-condensation of 1,2-diaminoethane and acetylacetone, reacts with Cu(BF₄)₂ · 6H₂O to produce initially a dinuclear Cu(II) complex, [{Cu(AMAH)}₂(μ-4,4′-bipy)](BF₄)₂ (1) which undergoes hydrolysis in the reaction mixture and finally produces a linear polymeric chain compound, [Cu(acac)₂(μ-4,4′-bipy)]_n (2). The geometry around the copper atom in compound 1 is distorted square planar while that in compound 2 is essentially an elongated octahedron. On the other hand, the ligand HAMAH reacts with Cu(ClO₄)₂ · 6H₂O to yield a polymeric zigzag chain, [{Cu(acac)(CH₃OH)(μ-4,4′-bipy)}(ClO₄)]_n (3). The geometry of the copper atom in 3 is square pyramidal with the two bipyridine molecules in the cis equatorial positions. All three complexes have been characterized by elemental analysis, IR and UV–Vis spectroscopy and single crystal X-ray diffraction studies. A probable explanation for the different size and shape of the reported polynuclear complexes formed by copper(II) and 4,4′-bipyridine has been put forward by taking into account the denticity and crystal field strength of the blocking ligand as well as the Jahn–Teller effect in copper(II).     

A new synthetic route of 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride) and characterization of 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride)-containing polyimides

The title product 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride) was prepared from hexafluoroacetone and o-xylene as the starting materials by condensation, oxidation and dehydration three-step reaction sequence. It reacted with diamines in DMF or xylene to give polyimides by condensation polymerization. Thermal and viscosity analyses show that these polyimides have lower molecular weight but excellent thermal stability.     

Synthesis and spectroscopic studies of copper(II) and nickel(II) complexes containing hydrazonic ligands and heterocyclic coligand

Two types of copper(II) and nickel(II) complexes derived from benzophenone anthranoylhydrazone (L1), 2-acetonaftanone anthranoylhydrazone (L2), 4-phenylacetonaftonone anthranoylhydrazone (L3), benzophenone salicyoylhydrazone (L4), 2-acetonaftanon salicyoylhydrazone (L5), 4-phenylacetonaftanon salicyoylhydrazone (L6) and bidentate heterocyclic base [1,10-phenanthroline (phen)] with general stoichiometry [ML2] and [ML(phen)]Cl have been synthesized and characterized by elemental analysis, infrared spectra, UV-vis electronic absorption spectra and magnetic susceptibility measurements. The effect of varying pH and solvent on the absorption behavior of both ligands and complexes have been investigated. According to the IR spectra, the ligands act as monobasic bidentate and coordination takes place in the enol tautomeric form.     

Facile design of poly(3,4-ethylenedioxythiophene)-tris(2,2′-bipyridine)ruthenium (II) composite film suitable for a three-dimensional light-harvesting system

It has been confirmed that octasulfonatocalix[8]arene (Calx-S8) and tris(2,2′-bipyridine)ruthenium (II) (Ru(bpy)₃²⁺) can form a stable host-guest complex in aqueous solution. The binding constant for 1:1 [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ complex formation was estimated to be (2.4±0.8)×10⁴ dm³ mol⁻¹ by fluorescence titration, which indicates that the [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ complex is the main species in 1:1 molar ratio aqueous solution of Calx-S8 and Ru(bpy)₃²⁺. In situ UV-Vis spectroscopic measurements indicated that Ru(bpy)₃²⁺ complexes can be readily deposited onto ITO electrode through electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ host-guest complex as a dopant anion owing to the electrostatic interaction between the cationic conductive polymer and the anionic host-guest complex. The loading degree of the composite film with Ru(bpy)₃²⁺ can be determined by Lambert-Beer law modified for the two-dimensional concentration. The obtained composite film showed good photoelectric conversion properties in response to visible light irradiation. This is a novel photocurrent generation system in which the photoexcited state energy is efficiently collected by the conductive polymeric layer.