Ruthenium(II) complexes with 2-(benzylimino-methyl)-4-R-phenol containing the trans(PPh3),cis(CO,Cl)-{Ru(PPh3)2(CO)Cl} unit

Reactions of [Ru(PPh₃)₃Cl₂] with 2-(benzylimino-methyl)-4-R-phenol (H^RL, R = H, Cl, Br and OMe) in boiling methanol in presence of triethylamine afford ruthenium(II) complexes of general formula [Ru(^RL)(PPh₃)₂(CO)Cl] in 57-64% yield. Microanalysis, spectroscopic (infrared, electronic and NMR) and cyclic voltammetric measurements have been used for the characterization of the complexes. Crystal structures of two representative complexes have been determined by X-ray crystallography. The carbonyl, the chloride, the N,O-donor ^RL⁻ and the two mutually trans PPh₃ molecules assemble a distorted octahedral CClNOP₂ coordination sphere around the metal centre in each complex. The complexes display the Ru(II) → Ru(III) oxidation in the potential range 0.62-1.16 V (vs. Ag/AgCl).     

Use of ethyl oxamate for syntheses of oxamato(-1) and novel μ-oxamato(-2) complexes

Summary The use of ethyl oxamate for the synthesis of inorganic oxamato complexes is reported. A reaction system leading to the preparation of the novel polymeric -oxamato(-2) complexes [M(oxm)(H₂O)₂] _x (M=Cu, Zn, Cd), [Co(oxm)(H₂O)₂] _x ·0.5xH₂O and [Ni(oxm)(H₂O)₂] _x ·xH₂O is described (H₂ oxm = oxamic acid). Ethyl oxamate can also be used for the preparation of monomeric oxamato(-1) complexes.

---

Der Einsatz von Ethyloxamat für die Synthese von Oxamato(-1) und neuen -Oxamato(-2)-Komplexen (Kurze Mitt.)

Zusammenfassung Es wird der Einsatz von Ethyloxamat für die Synthese von anorganischen Oxamato-Komplexen beschrieben. Ein Reaktions-System für die Herstellung von neuen -Oxamato(-2)-Komplexpolymeren: [M(oxm)(H₂O)₂] _x ; (M = Cu, Zn, Cd), [Co(oxm)(H₂O)₂] _x ·0.5xH₂O und [Ni(oxm)(H₂O)₂] _x ·xH₂O, wird vorgestellt. Ethyloxamat kann auch für die Herstellung von monomeren Oxamato(-1)-Komplexen verwendet werden.

     

Thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate as reversible ON–OFF receptor for fluoride in acetonitrile

A new thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate (L) has been synthesized and characterized. The binding properties of L have been studied with nineteen different anions. The L exhibited selective chromogenic as well as fluorescent chemosensor property toward F⁻ by a ∼13-fold increase in the emission intensity upon binding with F⁻. The minimal detection limit for F⁻ is 185 ± 5 ppb in acetonitrile. Interaction of F⁻ led to a bathochromic shift of 80 nm in the absorption band. An INHIBIT logic gate has been proposed using the output obtained from the fluorescence studies. The structure of the species formed upon the interaction of F⁻ with L has been established by DFT computations.     

Isolation of C60(CF3)n (n = 2, 4, 6, 8, 10) with high compositional purity

The high temperature reaction of C₆₀ with silver(I) trifluoroacetate followed by 500 °C sublimation and subsequent HPLC purification has led to the isolation of the five trifluoromethyl[60]fullerenes C₆₀(CF₃)_n (n=2, 4, 6, 8, 10). Four of them have >90% compositional purity. Two of the compounds, C₆₀(CF₃)₄ and C₆₀(CF₃)₆, were obtained as C₁-symmetry isomers with >90% isomeric purity, and a sample of C₆₀(CF₃)₂ also contained ca. 15-20% of a C_s-symmetry isomer of C₆₀(CF₃)₄. The new compounds were characterized by IR and EI mass spectrometry (all five compounds), NMR spectroscopy (C₆₀(CF₃)₂, C₆₀(CF₃)₄, and C₆₀(CF₃)₆), and 2D COSY NMR spectroscopy (C₆₀(CF₃)₄ and C₆₀(CF₃)₆). Calculations at the AM1 and DFT levels of theory have led to the prediction of the most likely structures for C₆₀(CF₃)₂, C₁-C₆₀(CF₃)₄, C_s-C₆₀(CF₃)₄, and the two most likely structures of C₁-C₆₀(CF₃)₆.     

Modeling phase equilibria of alkanols with the simplified PC-SAFT equation of state and generalized pure compound parameters

The simplified PC-SAFT equation of state has been applied to liquid–liquid, vapor–liquid and solid–liquid equilibria for mixtures containing 1- or 2-alkanols with alkanes, aromatic hydrocarbons, CO₂ and water. For the alkanols we use generalized pure compound parameters. This means that two of the physical pure compound parameters, m (segment number) and σ (segment diameter), are obtained from linear extrapolations, since m and mσ³, increase linearly with respect to the molar mass, and moreover, the two association parameters (association energy and association volume) were assumed to be constant for all alkanols. Only the dispersion energy is fitted to experimental data. Thus it is possible to estimate parameters for several 1- and 2-alkanols. The final aim is to develop a group contribution approach for PC-SAFT which is suitable for complex compounds, considering that the motivation of this project is to obtain a thermodynamic model which can be used in the development of sophisticated products such as pharmaceuticals, polymers, detergents or food ingredients. One of the severe limitations in applying SAFT-type equations of state to these compounds is that the procedure for obtaining the pure compound parameters is usually based on fitting to saturated vapor pressure and liquid density data over an extended temperature range. However, such data are rarely available for complex compounds. To verify the new pure compound parameters, comparisons to ordinary optimized alkanol parameters, where all five pure compound parameters were fitted to experimental liquid density and vapor pressure data, were made. The results show that the new generalized alkanol parameters from this work perform at least as well as other alkanol parameter sets.     

An antiferromagnetically coupled hexanuclear copper(II) Schiff base complex containing phenoxo and dicyanamido bridges: Structural aspects and magnetic properties

A novel hexanuclear complex [{(CuL)₂Cu}₂(μ-dca)₂](ClO₄)₂·2L′(1) (where H₂L = (OH)C₆H₄C(CH₃)N(CH₂)₃NC(CH₃)C₆H₄(OH) or N,N′-bis(2-hydroxyacetophenone) propylenediimine and dca = N(CN)₂⁻ and L′ = 2-hydroxyacetophenone) has been synthesized and characterized by elemental analysis, UV-Vis, FT-IR spectroscopic and electrochemical methods. Single crystal X-ray structural characterization reveals a centrosymmetric nature of the complex unit, where the metal centers adopt distorted square-planar and distorted octahedral geometries. Structural analysis also reveals μ₂-phenoxo bridges between terminal and the central copper(II) centers of the asymmetric [(CuL)₂Cu(dca)] unit, the latter being interconnected to its symmetry related counterpart by double μ_1,5-dca bridges, leading to the hexanuclear complex ion [{(CuL)₂Cu}₂(μ-dca)₂]²⁺. Low temperature susceptibility measurements of 1 revealed the presence of strong antiferromagnetic coupling (2J = −407 cm⁻¹) between the copper(II) centers.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

Synthesis and electrochemical study of 2-(2-pyridyl)benzothiazole complexes with transition metals (CoII, NiII, and CuII). Molecular structure of aquabis[2-(2-pyridyl)benzothiazole]copper(II) diperchlorate

The reactions of 2-(2-pyridyl)benzothiazole (1) with MX₂·nH₂O salts (M = Ni^II, Co^II, or Cu^II; X = Cl or ClO₄; n = 0–2) in EtOH afforded the corresponding complexes. Depending on the nature of the counterion in the starting metal salt, the reactions give compounds of composition M(1)Cl₂·nH₂O or Cu(1)₂(ClO₄)₂·H₂O. The molecular and crystal structure of the Cu^II(1)₂(ClO₄)₂·H₂O complex was established by X-ray diffraction. The copper atom in this complex has a distorted tetragonal-pyramidal ligand environment and is coordinated by four nitrogen atoms of two ligand molecules and one water molecule. Electrochemical study of the ligand and the resulting complexes by cyclic voltammetry and at a rotating disk electrode demonstrated that ligand 1 stabilizes reduced forms of complexes containing Ni, Co, or Cu atoms in the oxidation state +1. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1738–1744, October, 2006.     

Phase equilibria modeling of biodiesel related mixtures using the GCA-EoS model

In this work, a group-contribution equation of state that takes into account association effects (GCA-EoS) is extended to model the phase behavior of fatty esters (biodiesel) in binary mixtures with glycerol, alcohols and water and ternary mixtures with glycerol and methanol. A new associating group (glycerol hydroxyl group: OH^Gly) was defined to take into consideration the association effects in the glycerol molecule. Self-association of methanol, water and glycerol and cross-association between methanol–glycerol, alcohol–ester, water–ester and glycerol–ester groups were considered. New pure-group, binary interaction and association parameters have been determined. The correlations and predictions of the model are found in acceptable agreement with selected experimental data reported in the literature.     

Synthesis, heat capacity and enthalpy of formation of [Ho2(l-Glu)2(H2O)8](ClO4)4·H2O

A complex of holmium perchlorate coordinated with l-glutamic acid, [Ho₂(l-Glu)₂(H₂O)₈](ClO₄)₄·H₂O, was prepared with a purity of 98.96%. The compound was characterized by chemical, elemental and thermal analysis. Heat capacities of the compound were determined by automated adiabatic calorimetry from 78 to 370 K. The dehydration temperature is 350 K. The dehydration enthalpy and entropy are 16.34 kJ mol⁻¹ and 16.67 J K⁻¹ mol⁻¹, respectively. The standard enthalpy of formation is −6474.6 kJ mol⁻¹ from reaction calorimetry at 298.15 K.     

Effect of doping and temperature on the crystal structure of (V1−xMox)2O3 above and below the metal/insulator transition

The crystal structure of new molybdenum-doped vanadium sesquioxides (V_1−xMo_x)₂O₃ (0?x?0.20) has been studied at low temperature (10 K) and up to room temperature, through neutron and X-ray powder diffraction. The transition from insulating I- to metallic M-type phases, either by doping or thermally driven, is accompanied by an abrupt decrease of all interatomic distances. Within each structural type however, at 10 K, the effect of doping is essentially the same as at room temperature: it increases cation-oxygen distances, and decreases cation-cation distances, making the cationic coordination octahedra more regular. Thermal effects differ for each phase type: all interatomic distances normally increase in the M-type phase (but with different octahedral modifications depending on doping), but they decrease or remain constant in the I-type phase. This produces an unusual negative thermal expansion coefficient up to 5% at low temperature for the doped compounds.     

Deprotonated and non-deprotonated cobalt(II) complexes of the bis-amide tetradentate ligand N,N′-(dipicolyl)-1,8-naphthylene diamine. Three different modes of coordination by the ligand

The preparation and some properties of the cobalt(II) complexes Co(LH₂)Cl₂·2H₂O, Co(LH₂(NCS)₂ and CoL·H₂O (whereLH₂=N,N-(dipicolyl)-1,8-naphthylenediamine) are reported. On the basis of magnetic moments, visible reflectance and IR data, the structure is proposed to be pseudo-octahedral for Co(LH₂)Cl₂·2 H₂O, pseudo-tetrahedral for Co(LH₂)(NCS)₂ and square planar for CoL·H₂O.

---

Deprotonierte und Nicht-deprotonierte Co(II)-Komplexe des vierzähnigen Bisamid-Liganden N,N-(Dipicolyl)-1,8-naphthyldiamin. Drei verschiedene Koordinationstypen

Zusammenfassung Es werden die Darstellung und einige Eigenschaften der Kobalt(II)-Komplexe Co(LH₂)Cl₂·2 H₂O, Co(LH₂)(NCS)₂ und CoL·H₂O [LH₂=N,N-(dipicolyl)-1,8-naphthylendiamin] diskutiert. Auf der Grundlage von magnetischen Momenten, von Daten der sichtbaren Reflektions-und IR-Spektren wird eine pseudooctaedrische Struktur für Co(LH₂)Cl₂·2H₂O, eine pseudotetraedrische für Co(LH₂)(NCS)₂ und eine planar-quadratische für CoL·H₂O vorgeschlagen.

     

Synthesis,Characterization, and DNA Binding Properties of Dinuclear Copper（Ⅱ） Complex [Cu2（TATP）2（L-Leu）2（CIO4）2]2·2H2O

A dinuclear copper（Ⅱ） complex[Cu2（TATP）2（L-Leu）2（CIO4）2]2·2H2Owas synthesized and characterized, where, TATP=1,4,8,9-tetraazatriphenylene, and L-Leu=L-leucinate. The complex was crystallized in the triclinic space group P1, with two independent molecules in a unit cell. Two Cu（Ⅱ） ions in each complex [Cu2（TATP）2（L-Leu）2（CIO4）2] molecule were found to be in different coordination geometries, i.e., Cu2 or Cu4 of a distorted square-pyramidal geometry coordinated with two nitrogens of TATP, the amino nitrogen and one carboxylate oxygen of L-Leu and one oxygen of perchlorate, and Cul or Cu3 with an octahedral geometry coordinated with the above stated similar coordinated atoms, and another carboxylate oxygen of L-Leu coordinating to Cu2 or Cu4. The complex can interact with CT-DNA by an intercalative mode and cleave pBR322 DNA in the presence of ascorbate.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

A short, simple and general approach for the synthesis of (3S,4S)-3-methoxy-4-methylamino pyrrolidine and (3S,4R)-3-methoxy-4-methylamino pyrrolidine

A general and efficient stereoselective approach for the synthesis of (3S,4S) and (3S,4R)-3-methoxy-4-methylamino pyrrolidines, a part of the structure of AG-7352, a naphthyridine antitumor agent and quinoline antibacterial compounds has been described.     

Substitution of Co in YBa2Fe3O8

The accommodation of Co in the oxygen-saturated solid-solution phase YBa₂(Fe_1−zCo_z)₃O_8+w has been investigated by powder X-ray and neutron diffraction techniques, as well as by Mössbauer spectroscopy. Of the nominal composition range 0.00?z?1.00 tested, the solid-solution limit under syntheses at 950°C in is z=0.47(5). No symmetry change in the nuclear and magnetic structures is seen as a consequence of the Co substitution, and the Co atoms are distributed evenly over the two sites that are square-pyramidally and octahedrally coordinated for w=0. The oxygen-saturated samples maintain their oxygen content roughly constant throughout the homogeneity range, showing that Co³⁺ replaces Fe³⁺. Despite the nearly constant value of w, Mössbauer spectroscopy shows that the amount of tetravalent Fe slightly increases with increasing z, and this allows Co to adopt valence close to 3.00 to a good approximation. The magnitude of the antiferromagnetic moment (located in the a,b plane) decreases with z in accordance with the high-spin states of the majority Fe³⁺ and Co³⁺ ions. Bond-valence analyses are performed to illustrate how the structural network becomes increasingly frustrated as a result of the substitution of Fe³⁺ by the smaller Co³⁺ ion. A contrast is pointed out with the substitution of cobalt in YBa₂Cu₃O₇ where it is a larger Co²⁺ ion that replaces smaller Cu²⁺.     

Action des hydrazines fluoroalkylées sur les phosphoallènes: synthèse d’hydrazones N-fluoroalkylées β-phosphonatées

Ten phosphorylated β-hydrazones of structure R₂P(O)C(NNHR_F)CHR₂′ were prepared in 54-91% yield by heating the allenes R₂P(O)CHCCR₂′ with fluorinated hydrazines H₂NNHR_F in chloroform or methanol [R=Ph, OCH₂C(Me)₂CH₂O or OCH₂C(Me)(Pr)CH₂O, R′=H or Me and R_F=CH₂CF₃ or C₆F₅]. Two cyclohexyl derivatives were prepared similarly from R₂P(O)CHCCy. The triphenyl derivatives Ph₂P(O)CH₂C(NNHCH₂CF₃)Ph and Ph₂P(O)CH₂C(NNHC₆F₅)Ph were made in 91 and 68% yield by heating the ketones Ph₂P(O)CH₂C(O)Ph with an ethanol solution of the corresponding hydrazines. The stereochemistry of the hydrazones was determined by multinuclear NMR experiments. Compounds with C(NNHR_F)Me groups exist as a mixture of Z and E isomers, with the Z form predominating (fluorinated group syn to phosphorus). Those with C(NNHR_F)CHMe₂, C(NNHR_F)Cy or C(NNHR_F)Ph groups were formed selectively, the Z isomers being the only products. The results are explained by steric hindrance, the bulkier isopropyl, cyclohexyl or phenyl group disfavouring the E configuration. , , , NMR data, coupling constants and IR data are reported.