Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.     

New active ruthenium(II) complexes based N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester ligands for transfer hydrogenation of aromatic ketones by propan-2-ol

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine, 1 and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester, 2 ligands to afford bridged dinuclear complexes [C₁₀H₆N₂{NHPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 3 and [C₁₀H₆N₂{OPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 4 in quantitative yields. These bis(aminophosphine) and bis(phosphinite) based Ru(II) complexes serve as active catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 2-propanol and especially 4 acts as a good catalyst, giving the corresponding alcohols in 99% yield in 20 min (TOF ? 280 h⁻¹).     

Copper(I) halide complexes with 2,2′-bis(diphenylphosphano)-1,1′-binaphthyl (rac-binap) and heterocyclic thiones. Racemic compounds in chiral and achiral crystal space groups

Reactions of copper(I) halides with racemic 2,2′-bis(diphenylphosphano)-1,1′-binaphthyl (rac-binap) in 1:1 molar ratio afforded mononuclear complexes of the type [CuX(rac-binap)] (X = Cl, Br, I) which, on further treatment with 1 equiv. of pyridine-2-thione (py2SH), pyrimidine-2-thione (pymtH) or 4,6-dimethyl-pyrimidine-2-thione (dmpymtH) gave rise to the formation of mixed-ligand complexes of the formula [CuX(rac-binap)(thione)]. The molecular structures of [CuBr(rac-binap)(py2SH)] · 2CH₂Cl₂, [CuBr(rac-binap)(py2SH)] · CH₂Cl₂ and [CuBr(rac-binap)(dmpymtH)] · CH₂Cl₂ have been established by single-crystal X-ray diffraction. Each of the complexes features a distorted tetrahedral copper(I) center with the phosphane acting in a chelating fashion. The complexes are strongly luminescent in the solid state at ambient temperature. Unusually, the [CuBr(rac-binap)(py2SH)] · 2CH₂Cl₂ molecules crystallise in a chiral space group with independent S- and R-enantiomers in the asymmetric unit.     

A simple one-pot synthesis of functionalised 6-(indol-3-yl)-2,2′-bipyridine derivatives via multi-component reaction under neat condition

A series of 4-aryl-6-(1H-indol-3-yl)-2,2-bipyridine-5-carbonitrile derivatives were synthesized via a one-pot multi-component reaction of aromatic aldehydes, 3-(cyanoacetyl)indole and 2-acetyl pyridine in ammonium acetate by conventional heating and microwave irradiation under solvent-free condition. Also a series of 6,6′-di(1H-indol-3-yl)-4,4′-diaryl-2,2′-bipyridine-5,5′-dicarbonitrile derivatives were synthesized using cinnamils, 3-(cyanoacetyl)indole and ammonium acetate. The methodology affords high yields of product at short reaction time.     

Revision of the structure of cuculoquinone to 3,3′-bis(6-ethyl-2,5,7,8-tetrahydroxy-1,4-naphthoquinone) and confirmation of the proposed structure by synthesis

A reinvestigation of cuculoquinone, previously isolated from the lichen Cetraria cucullata, led to a revision of the proposed structure to 3,3′-bis(6-ethyl-2,5,7,8-tetrahydroxy-1,4-naphthoquinone). The new structure was confirmed by synthesis.     

The first approach to optically active 2,2′-bipyridine alkyl sulfoxides

The synthesis of 6,6′-bis(alkylsulfanyl)-2,2′-bipyridines and their asymmetric oxidation to non-racemic 2,2′-bipyridine alkyl sulfoxides using either (+)-(8,8-dichlorocamphorylsulfonyl)oxaziridine or a modified Sharpless reagent is reported.     

Preparation,crystal structures and spectroscopic characterization of oxalate copper(II) complexes containing the nitrogen ligands 4,4′-dimethyl-2,2′-bipyridine and di(2-pyridyl)sulfide

The preparation, crystal structures and spectroscopic characterization of four oxalate copper(II) complexes containing the 4,4′-dimethyl-2,2′-bipyridine (Mebpy) or di(2-pyridyl)sulfide (DPS) nitrogen ligands namely [μ-(ox){Cu(Mebpy)(NO₃)(H₂O)}₂] (1), [μ-(ox){Cu(Mebpy)(ClO₄)(H₂O)}₂] (2), [μ-(ox){Cu(DPS)(H₂O)}₂](ClO₄)₂ (3) and [Cu(DPS)(ox)(H₂O)] · 2H₂O (4) are described. X-ray diffraction measurements have shown that complexes 1–3 are binuclear, in which the oxalate anion bridges two Cu(II) centers, while the complex (4) is mononuclear and the oxalate anion adopts the terminal bidentate chelating coordination mode. In 1 and 2 the Cu(II) sites display a distorted octahedral geometry (4+2 environment) and in compounds 3 and 4 the Cu(II) centers exhibit a slightly distorted square pyramidal geometry. In addition, complexes 1 and 2 present a 2D supramolecular arrangement through hydrogen bonds between coordination water molecules and nitrate or perchlorate anions and π-stacking interaction between the pyridyl rings of Mebpy nitrogen ligands.     

Effect of a carboxyl group on the chemiluminescent reaction of tris(2,2′-bipyridine)ruthenium(III) with aliphatic amines

The effect of a carboxyl group beside nitrogen of aliphatic amines on the tris(2,2′-bipyridine)ruthenium(III), Ru(bpy)₃³⁺, chemiluminescent reaction was examined. It has been shown that a carboxylate anion promotes the chemiluminescent reaction at a lower pH and then the aliphatic amines with this substituent can be sensitively detected compared with corresponding aliphatic amines without this substituent. Based on this finding, preliminary studies on simultaneous determination of 4-hydroxyproline, N-methylglycine, N-methylalanine, proline, and pipecolic acid in human serum have been performed using isocratic reversed-phase ion-pair high-performance liquid chromatography (HPLC) with electrogenerated Ru(bpy)₃³⁺ chemiluminescent detection. The detection limits (signal-to-noise ratio of 3) with the proposed method were 3.0, 12, 2.7, 4.6, and 10 nM for 4-hydroxyproline, N-methylglycine, N-methylalanine, proline, and pipecolic acid, respectively.     

Planar 2,2′-bithiophenes with 3,3′- and 3,3′,4,4′-substituents. A computational study

Ab initio calculations have shown that when carbonyl groups are incorporated into the 3- and 3′-positions of bithiophenes, as part of five-membered rings, the bithiophene system is planar. This is due to electrostatic attraction between the carbonyl oxygen and the sulfur atom in the adjacent ring. In the analogous systems containing a CH₂ group in place of the carbonyl, or containing six-membered rather than five-membered rings, the bithiophenes are twisted. This has implications for preparing planar polythiophenes.     

Structures of 3,3′-dicarbometoxy-2,2′-bipyridine complexes with silver(I) and copper(II) cations

The structures of 3,3′-dicarbometoxy-2,2′-bipyridine (dcmbpy) complexes with copper(II) and silver(I) cations have been determined using single crystal X-ray-diffraction. The crystals of Cu(dcmbpy)Cl₂ are monoclinic, C2/c, a = 16.966(3), b = 18.373(3), c = 13.154(2) Å, β = 126.543(3)°. The crystals of Ag(dcmbpy)NO₃ · H₂O are also monoclinic, C2/c, a = 16.7547(13), b = 11.0922(9), c = 18.7789(18) Å, β = 100.228(7)°. The results have been compared with the literature data on the complexes of dcmbpy and its precursors: 2,2′-bipyridine (bpy) and 3,3′-dicarboxy-2,2′-bipyridine (dcbpy). Two types of complexes of 3,3′-carboxy derivatives of bpy are distinguished: (1) with metal atom bonded to two N atoms of the same molecule and (2) with metal atom bonded to two N atoms of two different molecules. The Cu(dcmbpy)Cl₂ complex belongs to the first type, whereas Ag(dcmbpy)NO₃ · H₂O belongs to the second type.     

Remarkable effect of metal fluoride catalyst on reaction of hexafluoropropene, sulfur and vinyl ethers. Convenient synthesis of 2,2-bis(trifluoromethyl)-4-R-thietanes, 3,3-bis(trifluoromethyl)-5-R-1,2-dithiolanes and 2,2-bis(trifluoromethyl)-4-R-1,3-dithiolanes

It was demonstrated that the outcome of the reaction of hexafluoropropene, sulfur and vinyl ether strongly depends on the catalyst and reaction conditions. The reaction of HFP and S_x leading to the formation of 2,2,4,4-tetrakis(trifluoromethyl)-1,3-dithietane (1) when it is catalyzed by CsF, proceeds under milder conditions and is easier to control compared to KF catalyzed process. The order of addition of reagents plays a crucial role on the outcome of the reaction. For example, the addition of vinyl ether to pregenerated solution of 1 in DMF solvent results in slow reaction, leading to the corresponding 2,2-bis(trifluoromethyl)-4-R-thietanes in 8-91% yield, and it is catalyzed by either by KF or CsF. The addition of second mole of sulfur to the solution of 2,2-bis(trifluoromethyl)-4-R-thietanes in the presence MF catalyst leads to insertion of sulfur into thietane ring with the formation of the corresponding cyclic disulfides—3,3-bis(trifluoromethyl)-5-R-1,2-dithietanes. On the other hand, the addition of second mole of sulfur to the solution of 1 in DMF in the presence of CsF catalyst, followed by addition of vinyl ether results in exothermic reaction, and it produces the corresponding 2,2-bis(trifluoromethyl)-4-alkoxy-1,3-dithiolanes in good yield.It was also demonstrated that 2,2-bis(trifluoromethyl)-4-R-thietanes can undergo disproportionation under action of fluoride anion, producing a mixture of the corresponding 1,2-dithiolane and CF₂C(CF₃)CH₂CFHOR. The nucleophilic attack of fluoride anion in this case proceeds selectively on the carbon of the thietane ring, bearing alkoxy group.The structure of 2,2-bis(trifluoromethyl)-4-R-thietanes forming as the result of 2 + 2 cycloaddition reaction between hexafluorothioacetone generated “in situ” from dimer 1 and vinyl ether was firmly supported by single crystal X-ray diffraction data, obtained for thietane bearing t-BuO-group.     

Sensitive chemically amplified electrochemical detection of ruthenium tris-(2,2′-bipyridine) on tin-doped indium oxide electrode

Optimized combination of chemical agents was selected for sensitive electrochemical detection of dissolved ruthenium tris-(2,2′-bipyridine) (Ru-bipy). The detection was based on the chemical amplification mechanism, in which the anodic current of a redox-active analyte was amplified by a sacrificial electron donor in solution. On indium-doped tin oxide (ITO) electrodes, electrochemical reaction of the analyte was reversible, but that of the electron donor was greatly suppressed. Several transition metal complexes, such as ferrocene and tris-(2,2′-bipyridine) complexes of osmium, iron and ruthenium, were evaluated as model analyte. A correlation between the amplified current and the standard potential of the complex was observed, and Ru-bipy generated the largest current. A variety of organic bases, acids and zwitterions were assessed as potential electron donor. Sodium oxalate was found to produce the largest amplification factor. With Ru-bipy as the model analyte and oxalate as the electron donor, the analyte concentration curve was linear up to 50 μM, with a lower detection limit of approximately 50 nM. Preliminary work was presented in which a Ru-bipy derivative was attached to bovine serum albumin and detected electrochemically. Although the combination of Ru-bipy, oxalate and ITO electrode has been used before for electrochemiluminescent detection of Ru-bipy and oxalate, as well as electrochemical detection of oxalate, its utility in amplified voltammetric detection of Ru-bipy as a potential electrochemical label has not been reported previously.     

A novel tris(2,2′-bipyridine)ruthenium(II)/tripropylamine cathodic electrochemiluminescence in acetonitrile for the indirect determination of hydrogen peroxide

A novel tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) cathodic electrochemiluminescence (ECL) was generated at −0.78 V at the Pt electrode in acetonitrile (ACN), which suggested that the cathodic ECL differed from conventional cathodic ECL. It was found that tripropylamine (TPrA) could enhance this cathodic ECL and the linear range (log-log plot) was 0.2 μM-0.2 mM. In addition, hydrogen peroxide (H₂O₂) could inhibit the cathodic ECL and was indirectly detected with the linear range of 27-540 μM. The RSD (n = 12) of the ECL intensity in the presence of 135 μM H₂O₂ was 0.87%. This method was also demonstrated for the fast determination of H₂O₂ in disinfectant sample and satisfactory results were obtained.     

Derivatives of 1,1′-bis(diphenylphosphino)ferrocene (dppf): Electrochemistry, complexation and the X-ray structures of 1,1′-bis(diphenylphosphino)osmocene (dppo) and [PdCl2(dppo)]

The oxidative electrochemistry of 1,1′-bis(diphenylphosphino)osmocene (dppo) and 1,1′-bis(diphenylarsino)ferrocene (dpaf) was studied in dichloromethane with tetrabutylammonium hexafluorophosphate as the supporting electrolyte. The [MCl₂(P^∩P)] (M = Pd or Pt; P^∩P = dppo or 1,1′-bis(diphenylphosphinoindenyl)iron) complexes were prepared, studied electrochemically and the X-ray structures of dppo and [PdCl₂(dppo)] were determined.     

Synthesis, resolution and applications of 3,3′-bis(RO)-MeO-BIPHEP derivatives

A series of optically pure 3,3′-bis(RO)-MeO-BIPHEP derivatives are prepared and used in palladium catalyzed asymmetric transformations. The phosphine oxide of (±)-5 is prepared in four steps from p-methoxyphenol and resolved using the novel resolving reagent chloro(l-menthoxy)dimethylsilane. Subsequent conversions provide catalysts 8 and 9. Ligands 6, 7 and 10 are prepared in six steps from p-methoxyphenol and the phosphine oxides of 6 and 7, and 10 are resolved using di-p-toluoyl- and dibenzoyl-l-tartaric acid, respectively. (R)-3,3′-Bispivalate 8 is superior to the other catalysts in asymmetric Heck reaction with 2,3-dihydrofuran while (R)-(+)-bis(tolyloxy) 10 and (+)-(R)-sugar derivative 9 are better in the Pd-catalyzed polyene cyclization; however, the absolute sense of chirality in the product from the polyene cyclization was reversed to that obtained when (R)-(+)-BINAP and (R)-(+)-MeO-BIPHEP were used.     

Synthesis, crystal structures, and photochromic properties of 6,6′ or 7,7′ or 6,7′-dimethyl-[2,2′-bi-1H-indene]-3,3′-diethyl-3,3′-dihydroxy-1,1′-diones

New photochromic title compounds 1, 2, and 3 have been prepared starting from 4-methylphthalic anhydride. Compounds 3a and 3b are a pair of enantiomers and were obtained as a racemic mixture (numbered as 3). Compounds 1, 2, and 3 were successfully separated from the isomeric mixture product through fractional crystallization, and their structures are confirmed by X-ray crystallographic analysis. UV-vis absorption and photochromic properties of 1, 2, and 3 have also been investigated. Results reveal that the substituents, even like the simple methyl, on the benzene rings of biindenylidenedione could considerably affect the photochromic property, as well as other properties of this kind of compounds.     

Facile design of poly(3,4-ethylenedioxythiophene)-tris(2,2′-bipyridine)ruthenium (II) composite film suitable for a three-dimensional light-harvesting system

It has been confirmed that octasulfonatocalix[8]arene (Calx-S8) and tris(2,2′-bipyridine)ruthenium (II) (Ru(bpy)₃²⁺) can form a stable host-guest complex in aqueous solution. The binding constant for 1:1 [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ complex formation was estimated to be (2.4±0.8)×10⁴ dm³ mol⁻¹ by fluorescence titration, which indicates that the [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ complex is the main species in 1:1 molar ratio aqueous solution of Calx-S8 and Ru(bpy)₃²⁺. In situ UV-Vis spectroscopic measurements indicated that Ru(bpy)₃²⁺ complexes can be readily deposited onto ITO electrode through electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ host-guest complex as a dopant anion owing to the electrostatic interaction between the cationic conductive polymer and the anionic host-guest complex. The loading degree of the composite film with Ru(bpy)₃²⁺ can be determined by Lambert-Beer law modified for the two-dimensional concentration. The obtained composite film showed good photoelectric conversion properties in response to visible light irradiation. This is a novel photocurrent generation system in which the photoexcited state energy is efficiently collected by the conductive polymeric layer.     

A convenient synthesis of 2,2′-bipyridine derivatives

Picolinates 7 were prepared from the corresponding α-chloro-β-keto-esters 6. Esters 7 were converted into 2,2′-bipyridine derivatives 10 via triazines 9 using an aza Diels-Alder reaction.     

Facile acid-catalyzed condensation of 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone with phenols, methoxyaromatic systems and enols

Various phenols, methoxy aromatic compounds, 3- and 4-hydroxycoumarins and enols smoothly condense with 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone 1 in an acid medium producing 2-aryl/alkyl-2,2′-biindan-1,1′,3,3′-tetrones in high yields. The adducts of resorcinol, 1,3,5-trihydroxybenzene and α- and β-naphthols of 1 preferably remain in the intramolecular hemi-ketal form, confirmed by X-ray diffraction studies. On the other hand para and meta substituted phenols condense with 1 in an acid medium to produce 6 or 7 substituted 2′,4-spiro(1′,3′-indanedion)-indeno[3,2-b]chromenes in good yields.