Spectral,magnetic, thermal and electrochemical studies on new copper(II) thiosemicarbazone complexes

The chelation behavior of some =N(1) and NH(4) thiosemicarbazones towards copper(II) ions has been investigated. The isolated complexes are characterized by elemental analysis, magnetic moment, electronic, IR, ESR and ms spectra, and by thermal and voltammetric measurements. The substituents on =N(1) and/or NH(4) thiosemicarbazones and the log K values of the ligands play an important role in complex formation. The IR spectra showed that the reagents HAT, HAET, HAPT, HApClPT, H₂ST and HBT are deprotonated in the complexes and act as mononegative SN donors; H₂SET, H₂SpClPT, H₂HyMBPT and H₂HyMBpClPT, as binegative NSO donors while H₂SPT is a mononegative NSO donor. The ESR spectra of the complexes are quite similar and exhibit axially symmetric g-tensor parameters with g _‖?>?g _⊥?>?2.0023. The loss of thiol and/or hydroxyl hydrogen was confirmed from potentiometric titrations of the ligands and their copper(II) complexes. The protonation constants of the ligands as well as the stability constants of their Cu(II) complexes were calculated. Thermogravimetric analysis of the complexes suggests different decomposition steps. The Coats–Redfern and Horowitz–Metzger equations have been used to calculate the kinetic and thermodynamic parameters for the different thermal decomposition steps of some complexes. The redox properties, nature of the electroactive species and the stability of the complexes towards oxidation are strongly dependent on the substituents on the precursor NH(4) thiosemicarbazone. The redox data are discussed in terms of the kinetic parameters and the reaction mechanism.     

Ultrasonic-bath-assisted preparation of mononuclear copper(I) thiosemicarbazone complex particles: Crystal structure,characterization and antimicrobial activity

Particles of the copper(I) thiosemicarbazone complex [Cu(Brcatsc)(PPh3)2Cl]·CH3CN (1), Brcatsc = 2-bromo-3-phenylpropenalthiosemicarbazone, were synthesized by an ultrasonic-bath-assisted method and characterized by elemental analyses, NMR (¹H, ¹³C, and ³¹P) and FT-IR spectroscopies, X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The thermal stability of 1 was studied by thermal gravimetry analysis and its structure was determined by single crystal X-ray diffraction. The compound 1 is a mononuclear complex with the copper(I) ion coordinated in a distorted tetrahedral geometry by one S atom of Brcatsc, two P atoms of two PPh₃, and one Cl atom. The complex involves the Brcatsc thiosemicarbazone ligand in an S monodentate bonding mode. The antibacterial activity of the ligand and its copper(I) complex was studied against two gram-positive (Staphylococcus aureus and Enterococcus faecalis) and two gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria.     

Silver(I) and copper(I) complexes with ferrocenyl ligands bearing imidazole or pyridyl substituents

The reactions between five ferrocenyl derivatives containing both a CO and at least an imidazole or pyridine nitrogen atom and AgPF₆, AgOTf, or [Cu(NCCH₃)₄]PF₆ precursors were studied. The ligand {[bis(2-pyridyl)amino]carbonyl}ferrocene (L3), derived from (2-pyridyl)amine, favored tetrahedral coordination of Ag⁺ (with two ligands) and of Cu⁺ (with two acetonitrile ligands left from the precursor). In all the other ligands, both metal centers coordinated linearly to two ligands, preferring the imidazole or pyridinic nitrogen to other nitrogen atoms (amine) or oxygen donors.When the counter anions were triflate, the crystal structure showed a dimerization of the complex, with the ferrocenyl moieties occupying cis positions, by means of a weak Ag?Ag interaction. This was shown experimentally in the crystal structure of complex [Ag(L1)₂]OTf (L1 = ferrocenyl imidazole) and in the presence of peaks corresponding to {Ag₂(L2)₃(OTf)}⁺ and {Ag₂(L2)₄(OTf)}⁺ in the mass spectra of [Ag(L2)₂]OTf (L2 = ferrocenyl benzimidazole). In all complexes containing PF₆, there was no evidence for dimerization. Indeed, in the crystal structure of [Ag(L2)₂]PF₆, the ferrocenyl moieties occupy trans positions and the metal centers are far from each other. DFT calculations showed that the energy of the cis and trans conformers is practically the same and the balance of crystal packing forces leads to dimerization when triflate is present.     

Synthesis, characterization and luminescence properties of copper(I) complexes containing 2-phenyl-3-(benzylamino)-1,2-dihydroquinazolin-4(3H)-one and triphenylphosphine as ligands

Some copper(I) complexes of the formula [Cu(L)(PPh₃)₂]X (1-4) [where L = 2-phenyl-3-(benzylamino)-1,2-dihydroquinazolin-4(3H)-one; PPh₃ = triphenylphosphine; X = Cl⁻, NO₃⁻, ClO₄⁻ and BF₄⁻] have been prepared and characterized on the basis of elemental analysis, IR, UV-Vis and ¹H NMR spectral studies. The representative complex of the series 4 has been characterized by single crystal X-ray diffraction which reveal that in the complex the central copper(I) ion assumes the irregular distorted-tetrahedral geometry. Cyclic voltammetry of the complexes indicate a quasireversible redox behavior corresponding to Cu(II)/Cu(I) couple. All the complexes exhibit intraligand (π → π^∗) fluorescence with high quantum yield in dichloromethane solution.     

3D Luminescent Copper(I) Iodide Coordination Polymer Based on Cu4I4 Clusters and an Ethyl‐bridging Bis(triazole) Ligand

The copper‐iodine based coordination polymer [Cu₄I₂(bmte)]_n ( 1 ) [H₂bmte = 1,2‐bis(5‐methyl‐1H‐1,2,4‐triazol‐3‐yl)ethane] was synthesized using cuprous iodide and a flexible 3‐substituted, ethyl‐bridging bis(triazole) ligand under solvothermal conditions. X‐ray diffraction analysis reveals that compound 1 shows a 3D framework containing Cu₄I₄ clusters and alternating left‐ and right‐handed [Cu(triazole)] helices, which result in a (4,8)‐connected fluorite (flu) topological network. Moreover, compound 1 exhibits orange phosphorescence with the emission maxima at 590 nm in the solid state at room temperature.     

Ruthenium(II), copper(I) and silver(I) complexes of large bite bisphosphinite, bis(2-diphenylphosphinoxynaphthalen-1-yl)methane: Application of Ru(II) complexes towards the hydrogenation of styrene and phenylacetylene

Ruthenium(II), copper(I) and silver(I) complexes of large bite bisphosphinite Ph₂P{(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)}PPh₂ (1) are described. Reactions of bisphosphinite 1 with [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ and RuCl₂(PPh₃)₃ afford mono- and bis-chelate complexes [RuCl(η⁶-p-cymene){η²-Ph₂P{(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)}PPh₂-κP,κP}]Cl (2) and trans-[RuCl₂{η²-Ph₂P{(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)}PPh₂-κP,κP}₂] (3), respectively. Treatment of 1 with CuX (X = Cl, Br and I) furnish 10-membered chelate complexes of the type [Cu(X){η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}] (4, X = Cl; 5, X = Br; 6, X = I), whereas [Cu(MeCN)₄]PF₆ affords a bis-chelated cationic complex [Cu{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}₂][PF₆] (7). Reaction between 1 and AgOTf produce both mono- and bis-chelated complexes [Ag{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}(SO₃CF₃)] (8) and [Ag{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}₂][SO₃CF₃] (9), respectively; whereas the similar reaction of 1 with[Ag(OTf)PPh₃] affords chelate complex of the type [Ag{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}(PPh₃)(SO₃CF₃)] (10). All the complexes were characterized by ¹H NMR, ³¹P NMR, elemental analysis and mass spectrometry, including low-temperature NMR studies in the case of silver complexes. The molecular structures of 4 and 6 are determined by X-ray diffraction studies. Ruthenium complexes 2 and 3 promote catalytic hydrogenation of styrene and phenylacetylene with good turnover numbers.     

Photoluminescence studies of iodobis-(tricyclohexylphosphine)copper(I) and iodobis-(tricyclohexylphosphine)copper(I) benzene solvate

Two newly prepared complexes were found to exhibit strong solid state emission behavior. The complexes are iodobis-(tricyclohexylphosphine)copper(I) and iodobis-(tricyclohexylphosphine)copper(I) benzene solvate. To understand the emission behavior of these complexes, density functional theory (DFT) calculations were employed. These calculations allowed the identification of major atomic contributions to HOMO, LUMO and LUMO+n orbitals. The excitation mechanism was found to be a combination of ligand to metal charge transfer (LMCT) and metal to ligand charge transfer (MLCT), with the dominance of the former. The emission lifetimes were also investigated and the decays of the complexes were found to be a bi-exponential in both methanol and cyclohexane.     

Investigations into bis(triphenylphosphine)copper(I) complexes with cyclic derivatives of methylpyruvate thiosemicarbazones

The syntheses of four compounds, obtained by the reaction of methylpyruvate thiosemicarbazone (Hmpt) and its methyl (Me-Hmpt) and allyl (Allyl-Hmpt) derivatives with bis(triphenylphosphine)copper(I) acetate, are reported. The compounds [Cu(PPh₃)₂(pt_c)(Hpt_c)]·H₂O (1), [Cu(PPh₃)₂(Me-pt_c)] (2), [Cu₂(PPh₃)₂μ-S(Me-pt)μ-S(Me-pt_c)]·H₂O (3) and [Cu(PPh₃)₂(Allyl-pt_c)] (4) [H₂pt = pyruvic acid thiosemicarbazone and Hpt_c = cyclized pyruvic acid thiosemicarbazone, Me = methyl and Allyl are radical substituents on the amino nitrogen] were characterized by elemental analysis, IR, ¹H NMR, and by X-ray crystallography. Compound 3 was also studied by EPR because of the presence in the compound of two copper atoms in two different oxidation states. During the complexation reaction, the thiosemicarbazone ligands tend to undergo a cyclization reaction that leads to the formation of a six-member heterocyclic ring. All four compounds present the [Cu(PPh₃)₂]⁺ fragment and constant but different coordination situations. Compound 1 contains two cyclic ligand molecules, one protonated and the other deprotonated, bound as monodentate through the sulfur. Compounds 2 and 4 present a single deprotonated cyclic SN bidentate ligand molecule, while compound 3 contains copper(I) and copper(II), and two ligand molecules, one of which is linear and behaves as SNO tridentate and the other is cyclic and behaves as bridging μSN.     

QSAR of copper(II) complexes with cytotoxic properties

Summary A QSAR based on a multiple regression analysis for 15 copper(II) semi- and thiosemicarbazone complexes with cytotoxic properties is presented. In vitro cytotoxicity was selected as the dependent variable and Van der Waals volumes (Vm), octanol- water partition coefficients (logP), specific rate constants of the copper(II) complexes towards superoxide radicals (k _s ) and variation in C=N vibration bands (CN) in IR spectra of the complexes with respect to the free ligands were selected as the independent variables. The stepwise regression procedure and the all possible regressions were practiced in the analysis of the data. The orthogonality analysis proved noncollinearity among the variables. According to the obtained equation the two best copper(II) complexes were submitted to a broad in vivo screening study and resulted to be active against La, P-388 and L-1210 leukemias.

---

QSAR von Kupfer(II)-Komplexen mit cytotoxischen Eigenschaften

Zusammenfassung Es wird eine quantitative Struktur-Aktivitäts-Beziehung basierend auf einer multiplen Regressionsanalyse für 18 Kupfer(II)-Semi- und Thiosemicarbazon-Komplexe präsentiert. Die in vitro-Cytotoxizität wurde als die abhängige Variable und Van-der-Waals-Volumina (Vm), Octanol-Wasser-Verteilungskoeffizienten (logP), spezifische Geschwindigkeitskonstanten der Kupfer(II)-Komplexe gegenüber Superoxid-Radikalen (k _s ) und die Variationen der C=N-Vibrationsbanden (CN) in den IR-Spektren der Komplexe gegenüber den freien Liganden als unabhängige Variablen eingeführt. Es wurde stufenweise Regression und die alle möglichen Regressionen-Prozedur in der Analyse der Daten verwendet. Die Orthogonalitätsanalyse zeigte Nichtkolinearität der Variablen an. Entsprechend den erhaltenen Gleichungen wurden die beiden besten Kupfer(II)-Komplexe einem breiten in vivo-Screening unterworfen. Sie waren gegenüber La, P-388 und L-1210 Leukemie aktiv.

     

π‐Complexes of Copper(I) Ionic Salts: Synthesis and Crystal Structure of (4‐Allylthiosemicarbazide)(sulfamato)copper(I) and Bis(4‐allylthiosemicarbazide)(sulfato‐O)dicopper(I)

Single crystals of [Cu(ATSC)]NH₂SO₃ ( 1 ) (ATSC –4‐allylthiosemicarbazide) were obtained by electrochemical synthesis using alternating current. Compound ( 1 ) crystallizes in P2₁2₁2₁ sp. gr., a = 6.8284(2), b = 9.3054(3), c = 16.1576(11) Å, Z = 4. ATSC moiety acts as tetradentate ligand, chelating two symmetrically related copper atoms. The Cu atom possesses trigonal pyramidal coordination, formed by two sulphur atoms (one of them at the apical position), nitrogen atom and C=C bond. Sulfamate anion is associated via hydrogen bonds. By slow hydrolysis of 1 crystals of [Cu₂(ATSC)₂]SO₄ ( 2 ) were obtained: P 1 sp. gr., a = 9.526(2), b = 12.687(2), c = 14.7340(10) Å, α = 95.119(10), β = 89.903(12), γ = 109.113(14)°, Z = 4. The asymmetric unit of 2 contains two formula units, which are related by pseudosymmetry via a glide plane a. One half of four ATSC molecules act as in 1 , the rest as tridentate ligands, which coordinate the two copper atoms in apical positions with sulfate anions. This Cu–S coordination was to date unknown. The structure of the ATSC ligands contributes to the unexpected competitiveness of C=bond in the coordination sphere of Cu^I inspite of strong donor atoms.     

Synthesis of new copper(I)-complexed rotaxanes via click chemistry

The Cu(I)-catalyzed dipolar cycloaddition of azides and terminal alkynes (‘click’ chemistry) has been used as a mild and efficient stoppering reaction for the preparation of new copper(I)-complexed rotaxanes.     

Synthesis and characterization of a stable copper (I) calix[4]dicyano-diimidazole complex

A new calix[4]dicyano-diimidazole ligand was prepared in two steps from a de-tert-butylated calix[4]arene. The corresponding Cu (I) complex was found to be remarkably stable. The X-ray structure of the latter revealed a mixture of both monomeric-mononuclear and dimeric-dinuclear complexes. Detailed investigations on this copper complex, involving NMR (VT and DOSY), Infra-red, and MS analyses, demonstrated that the dimeric-dinuclear complexe does not exist in solution. Despite the presence of two cyano binding groups on the calixarene platform, every attempts to isolate a stable Cu(II) complex failed.     

Synthesis and spectroscopic characterization of cobalt(II) thiosemicarbazone complexes

Thiosemicarbazone derivatives are formed on reaction between acetophenone, salicylaldehyde, benzophenone and/or 2-hydroxy-4-methoxybenzophenone and thiosemicarbazide or its N⁴H substituents (ethyl-, phenyl-, and p-chlorophenyl-). The ligands were investigated by elemental analysis and spectral (IR, ¹H?NMR and MS) studies. The formulas of the prepared complexes have been suggested by elemental analyses and confirmed by mass spectra. The coordination sites of each ligand were elucidated using IR spectra revealing bidentate and tridentate coordination. Different geometries for the complexes were proposed on the basis of electronic spectra and magnetic measurements. The complexes have been analyzed thermally (TG and DTG) and the kinetic parameters for some of their degradation steps were calculated.     

Synthesis and structures of monomeric [chloro(isatin-3-thiosemicarbazone)bis(triphenylphosphine)]copper(I) and dimeric [dichlorobis(thiophene-2-carbaldehyde thiosemicarbazone)bis(triphenylphosphine)]dicopper(I)] complexes

Reaction of copper(I) chloride with thiophene-2-carbaldehyde thiosemicarbazone (Httsc) in acetonitrile in the presence of Ph₃P yielded a sulfur-bridged dimer [Cu₂Cl₂(μ₂-S-Httsc)₂(PPh₃)₂] · 2CH₃CN (1), while a similar reaction with isatin-3-thiosemicarbazone (H₂itsc) formed a monomer, [CuCl(H₂itsc)(Ph₃P)₂] · 2CH₃CN (3). Furan-2-carbaldehyde thiosemicarbazone (Hftsc) also formed a compound of the composition [Cu₂Cl₂(Hftsc)₂(PPh₃)₂] · 2H₂O (2). Complexes 1–3 have been characterized using elemental analysis, IR, ¹H and ³¹P NMR spectroscopy and single crystal X-ray crystallography (1 and 3). Acetonitrile is engaged in hydrogen bonding with the chlorine atom {NCCH₂–H?Cl)}, which is necessary for the stabilization of the bridging sulfur in 1. In compound 3, however, acetonitrile is strongly hydrogen bonded to the NH hydrogen of the isatin ring {CH₃CN?NH(isatin)} and not to the chlorine atom. The Cu?Cu contact of 2.7719(5) Å in dimer 1 is close to twice the van der Waals radius of the Cu atom (2.80 Å).     

Ion chromatographic analysis of cyanate in gold processing samples containing large concentrations of copper(I) and other metallocyanide complexes

An ion chromatographic (IC) method was developed for the determination of cyanate in gold cyanidation samples containing large concentrations of metallo-cyanide complexes. The analysis was performed on a Waters HC IC-Pak A anion-exchange column with an anthranilic acid eluent, with detection achieved using indirect UV at 355 nm. Two procedures were developed for removal of the metallo-cyanide complexes prior to the IC analysis. The first was a manual off-line method which used solid-phase extraction cartridges containing a strong anion-exchange resin to trap the complexes and to then enable determination of cyanate without interference. In the second approach, an automated on-line method was developed which used an anion-exchange guard column to trap the complexes and a column switching valve to allow backflushing of the cyanate from the guard column. This enabled the total analysis to be performed in a time of 10–14 min, depending on the sample composition. Finally, a comparison of results obtained by the standard Kjeldahl nitrogen method for cyanate and the IC method revealed an interference in the Kjeldahl method for samples containing large concentrations of Cu(I)-cyanide complexes.     

Three- and four-coordinate copper(I) halide complexes of 2-(diphenylphosphano)benzaldehyde: Dimerization induced by thione-S ligation

Reactions of copper(I) halides with 2-(diphenylphosphano)benzaldehyde (PCHO) in 1:2 molar ratio afforded mononuclear complexes of the type [CuX(PCHO)₂], whereas treatment of these compounds with equimolar amounts of pyridine-2-thione or pyrimidine-2-thione gave rise to the formation of mixed-ligand dimers of the formula [CuX(PCHO)(thione)]₂. The molecular structures of [CuCl(PCHO)₂], [CuBr(PCHO)₂] and [CuCl(PCHO)(pymtH)]₂ have been established by single-crystal X-ray diffraction. The two homoleptic complexes feature a trigonal copper(I) centre with the phosphane acting as a monodentate ligand via the P atom. In the structure of the dimeric mixed-ligand complex each of the two metal centres exhibit a distorted tetrahedral environment with the thione-S atoms acting in a doubly bridging mode.     

Complexation of copper(I) by thiourea in acidic aqueous solution

The interaction of copper(II) and copper(I) with thiourea(Tu) has been investigated by UV and visible spectrophotometry. Over the range of concentrations of copper(I) and Tu(0.1–20)×10^–3 mol-dm^–3 in acid aqueous solutions there are two complexes, CuTu₂ ⁺ (log ₂=11.1) and the other has the ratio Cu/Tu=1/1 with the likely composition Cu₂Tu₂ ²⁺ with log ₂₂=18.5. By the determination of copper(0) solubility in acid thiourea solution and potentiometric measurements it was shown that the potential of the copper electrode is that of a non-equilibrium (corrosive) electrode.     

Heterocyclic substituted thiosemicarbazones and their Cu(II) complexes: Synthesis,characterization and studies of substituent effects on coordination and DNA binding

By reacting thiosemicarbazides substituted on the aminic nitrogen with 5-formyluracil, several new 5-formyluracil thiosemicarbazones (H₃ut) derivatives were synthesised and characterized. These ligands, treated with copper chloride and nitrate, afforded two different kinds of compounds. In the complexes derived from copper chloride the metal atom is pentacoordinated, being surrounded by the neutral ligand binding through SNO donor atoms and by two chlorines, while the nitrate derivatives consist of monocations and nitrate anions. The copper coordination (4 + 2) involves the SNO ligand atoms, two water oxygens and an oxygen atom of a monodentate nitrate group. On varying the substituents on the thiosemicarbazidic moiety, remarkable modifications of the coordination geometry are not observed for the complexes with the same counterion. For all the compounds, interactions with DNA (calf thymus) were studied using UV–Vis spectroscopy; the nuclease activity was verified on plasmid DNA pBR 322 by electrophoresis.     

Darstellung und Struktur von Tetraethylcyclotetraarsoxan-Komplexen von Kupfer(I)-Halogeniden

Preparation and Structure of Tetraethylcyclotetraarsoxane Complexes of Copper(I) Halides The polymeric complexes [Cu₄Cl₄{cyclo-(C₂H₅AsO)₄}₃]_n ( 1 ), [Cu₃Br₃{cyclo-(C₂H₅AsO)₄}₂]_n ( 2 ) and [Cu₆I₆{cyclo-(C₂H₅AsO)₄}₃]_n ( 3 ) were prepared by the reaction of (C₂H₅AsO)_n and CuX (X = Cl, Br, I) in acetonitrile and characterised by X-ray analysis. All three complexes contain only tetramers (C₂H₅AsO)₄ as ligands, in which the As₄O₄ ring systems coordinate between two and four Cu-atoms. In each case one As₄O₄ ring with a crown-shaped conformation is observed, which coordinates either four (in 1 ) or three (in 2 and 3 ) axially sited Cu-atoms. In addition there are further (C₂H₅AsO)₄ ligands, which display either a boat-chair- (in 1 ) or a twist-chair-conformation (in 1–3 ). The individual building units are connected to one another via Cu? X? Cu bridges (in 2 and 3 ) and/or centrosymmetric As₄O₄ ring systems (in 1–3 ) into chain ( 1 ) or layer structures ( 2 und 3 ).