Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(en)(X) (M = Mo, W; X = Br, N3, CN) and [(en)(η-C3H5)(CO)2M(μ-CN)M(CO)2(η-C3H5)(en)]Br (M = Mo, W)

Mononuclear compounds M(CO)₂(η³-C₃H₅)(en)(X) (X = Br, M = Mo(1), W(2); X = N₃, M = Mo(3), W(4); X = CN, M = Mo(5), W(6)) and cyanide-bridged bimetallic compounds [(en)(η³-C₃H₅)(CO)₂M(μ-CN)M(CO)₂(η³-C₃H₅)(en)]Br (M = Mo (7), W(8)) were prepared and characterized. These compounds are fluxional and display broad unresolved proton NMR signals at room temperature. Compounds 1-6 were characterized by NMR spectroscopy at −60 °C, which revealed isomers in solution. The major isomers of 1-4 adopt an asymmetric endo-conformation, while those of 5 and 6 were both found to possess a symmetric endo-conformation. The single crystal X-ray structures of 1-6 are consistent with the structures of the major isomer in solution at low temperature. In contrast to mononuclear terminal cyanide compounds 5 and 6, cyanide-bridged compounds 7 and 8 were found to adopt the asymmetric endo-conformation in the solid state.     

Phenyltellurenyl halide complexes of ruthenium and rhenium (CO)2RuBr2(PhTeBr)2 and (CO)3Re(PhTeI)3(μ3-I): Synthesis and crystal and molecular structures

Reactions of Ru₃(CO)₁₂ with PhTeBr₃ and of Re(CO)₅Cl with PhTeI in benzene give the stable complexes (CO)₂RuBr₂(PhTeBr)₂ (I) and (CO)₃Re(PhTeI)₃(μ³-I) (II) containing two and three ligands PhTeX (X = Br or I), respectively. The bonds between these ligands and the central metal atom are fairly shortened (on average, Ru-Te, 2.608 ?; Re-Te, 2.7554(12)-2.7634(13) ?). The Te-X bonds in the ligands PhTeBr (2.5163(5) ?) and PhTeI (2.7893(15) ?) are not lengthened appreciably. In complex II, the iodide anion is not coordinated by rhenium, yet being attached through weak secondary bonds to three Te atoms of the three ligands PhTeI.     

Intermolecular versus intramolecular C-H activation reaction in the thermolysis of [Ru(Me)Cp*(PMe2Ph)2] (Cp* = η-C5Me5): formation and crystallographic characterisation of [Ru(Ph)Cp*(PMe2Ph)2]

Thermolysis of the ruthenium complex [Ru(Me)Cp*(PMe₂Ph)₂] (1) (Cp* = η⁵-C₅Me₅) in benzene gives methane and [Ru(Ph)Cp*(PMe₂Ph)₂] (2), which is converted slowly to (3) through the loss of benzene. 2 was structurally characterised by single-crystal X-ray diffraction experiments. DFT calculations were performed in order to understand the behaviour of the ruthenium complex 1 towards inter- or intra-molecular C-H bond activation reactions.     

Synthesis and X-ray investigation of novel Fe and Mn phenyltellurenyl-halide complexes: (CO)3FeBr2(PhTeBr), (η-C5H5)Fe(CO)2(PhTeI2) and CpMn(CO)2(PhTeI)

New complexes of transition metals with organotellurium halide ligands are reported. Iodination of [CpMn(CO)₂]₂(μ-Ph₂Te₂) leads to the Te-Te bond cleavage and formation of CpMn(CO)₂(PhTeI). Oxidative addition of PhTeBr₃ to Fe(CO)₅ gives the monomeric complex (CO)₃FeBr₂(PhTeBr) which is isostructural with the recently reported (CO)₃FeI₂(PhTeI). Insertion of phenyltellurenyl iodide (PhTeI) into the Fe-I bond of CpFe(CO)₂I forms CpFe(CO)₂(TeI₂Ph). Molecular structures of the reported complexes were determined by single-crystal X-ray diffraction analysis (XRD). A considerable shortening of metal-tellurium distances is observed.     

A laser flash photolysis, matrix isolation, and DFT investigation of (η-C6H5Y)Cr(CO)3 (Y = NH2, OCH3, H, CHO, or CO2CH3)

The quantum yield for arene displacement from (η⁶-C₆H₅Y)Cr(CO)₃ was measured in 1,1,2-trifluorotrichloroethane (Y = NH₂, OCH₃, H, CHO, or CO₂CH₃). Values of 0.24, 0.27, 0.15, 0.17, and 0.32 were obtained respectively (λ_exc. = 355 nm). These values are significantly higher than those measured for photoinduced arene loss in hydrocarbon solvents using the same excitation wavelength. Laser flash photolysis of (η⁶-C₆H₅Y)Cr(CO)₃ in 1,1,2-trifluorotrichloroethane (λ_exc. = 355 nm) resulted in the rapid formation (<10 ns) of Cr(CO)₆. Matrix isolation experiments on (η⁶-C₆H₅Y)Cr(CO)₃ (Y = H or CHO) at 12 K in CH₄ or CO-doped CH₄ matrixes using monochromatic irradiation confirmed the presence of two discrete excited states, one leading to CO-loss and the other to arene-loss. The results correlate with the calculated electron drift in the excited state derived from density functional theory and time dependent density functional theory calculations.     

The structurally characterised silyl complexes, Os(κ-S2CNMe2)(SiMeCl2)(CO)(PPh3)2 and Os(κ-S2CNMe2)(SiCl3)(CO)(PPh3)2, which have remarkably unreactive Si-Cl bonds

Treatment of Os(κ²-S₂CNMe₂)H(CO)(PPh₃)₂ with HSiMeCl₂ or HSiCl₃ gives in high yield Os(κ²-S₂CNMe₂)(SiMeCl₂)(CO)(PPh₃)₂ (1) or Os(κ²-S₂CNMe₂)(SiCl₃)(CO)(PPh₃)₂ (2), respectively. The crystal structures of both compounds have been determined and the Os-Si distances are 2.3672(10) Å for 1 and 2.3449(12) Å for 2. In solution, and under forcing conditions, both compounds are extraordinarily unreactive towards hydroxide ions.     

Synthesis, X-ray crystal structure, and reactivity of Pd2(μ-dotpm)2 (dotpm = bis(di-ortho-tolylphosphino)methane)

Alkylation of PdCl₂(dotpm) (dotpm = bis(di-ortho-tolylphosphino)methane) with n-butyllithium produces the binuclear Pd(0) complex Pd₂(μ-dotpm)₂ and the elimination byproducts 1-butene, cis-2-butene, trans-2-butene, butane, and octane. The dibutyl complex, Pd(dotpm)(n-Bu)₂, is presumed to be the reaction intermediate. The crystal structure of Pd₂(μ-dotpm)₂ reveals that the methylene groups of the bridging dotpm ligands are located on opposite sides of the Pd₂P₄ unit, forming an 8-membered ring that is in an elongated chair conformation. The four phosphorus atoms are not coplanar, and the P1-P2-P3-P4 ring has a torsion angle of 13.8°, which minimizes the spatial interactions among the o-tolyl rings. The Pd-Pd bond distance is 2.8560(6) Å, which indicates that there is a weak “closed-shell” bonding interaction between the d¹⁰-d¹⁰ metal centers. Each palladium atom has a nearly linear geometry, and the eight methyl groups of the dotpm ligands shield the open coordination sites on the metal centers. Four methyl groups shield the metal atoms above and below the Pd₂P₄ ring cavity, and four methyl groups block the open metal sites outside of the Pd₂P₄ ring. The Pd₂(μ-dotpm)₂ complex readily undergoes oxidative addition of dichloromethane to form the rigid A-frame complex Pd₂Cl₂(μ-CH₂)(μ-dotpm)₂.     

Syntheses and crystal structures of [Bu3SbCr(CO)5], [Bu3BiM(CO)5] (M = Cr, W), and [Bu3BiMnCp′(CO)2] (Cp′ = η-C5H4CH3)

Syntheses and crystal structures of [^tBu₃SbCr(CO)₅] (1), [^tBu₃BiM(CO)₅] [M = Cr (2), W (3)] and [^tBu₃BiMnCp′(CO)₂] (4) (Cp′ = η⁵-C₅H₄CH₃) are reported.     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(L-L)(NCBH3) (M = Mo, W; L-L = dppe, bipy, en)

Compounds M(CO)₂(η³-C₃H₅)(L-L)(NCBH₃) (L-L = dppe, M = Mo(1), W(2); L-L = bipy, M = Mo(3), W(4); L-L = en, M = Mo(5), W(6)) were prepared and characterized. The single crystal X-ray analyses of 2-6 revealed that the cyanotrihydroborate anion bonds to the metal through a nitrogen atom, the open face of the allyl group being pointed toward the two carbonyls (endo-isomer). In compounds 2, 5, and 6, the two donor atoms of the bidentate ligand occupy equatorial and axial positions, respectively. In the solid state structures of compounds 3 and 4 both nitrogen atoms of the bipy ligand occupy equatorial positions. The NMR spectroscopy reveals a fluxional behavior of compounds 1, 2, 5, and 6 in solution. Although the fluxional behavior of compounds 5 and 6 ceased at about −40 °C, that of compound 1 could not be stopped even at −90 °C. Their low temperature conformations are consistent with their solid state structures. Both the endo- and exo-isomers coexist in solution for compounds 3 and 4.     

Synthesis, properties and structures of methyldiphenylphosphonium 1-indenylide, 1-C9H6PMePh2, and its chiral tricarbonylchromium(0) complex Cr(η-1-C9H6PMePh2)(CO)3

The hitherto unknown indenyl-derived ylide, methyldiphenylphosphonium 1-indenylide, 1-C₉H₆PMePh₂ (1) and its chromium(0) complex, Cr(η⁵-1-C₉H₆PMePh₂)(CO)₃ (2) have been synthesized and characterized spectroscopically and crystallographically. The structures and properties of 1 and 2 are compared with those of the analogous C₅H₄PMePh₂ and its chromium complex, Cr(η⁵-C₅H₄PMePh₂)(CO)₃. Compound 2, obtained as a racemic mixture, exhibits planar chirality resulting from coordination of the prochiral aromatic ligand.     

Segregated aromatic π-π stacking interactions involving fluorinated and non-fluorinated benzene rings: Cu(py)2(pfb)2 and Cu(py)2(pfb)2(H2O) (py = pyridine and pfb = pentafluorobenzoate)

The syntheses, physical characterization and crystal structures of two new molecular copper(II) complexes of composition [Cu(C₅H₅N)₂(C₇F₅O₂)₂] (1) and [Cu(C₅H₅N)₂(C₇F₅O₂)₂(H₂O)] (2) (C₅H₅N = py = pyridine and C₇F₅O₂⁻ = pfb = pentafluorobenzoate) are reported. Single-crystal X-ray structure determinations revealed that in 1, the Cu²⁺ ion, which lies on a crystallographic inversion centre, is coordinated to two py molecules and two oxygen atoms from two monodentate pfb anions, resulting in a trans-CuN₂O₂ square planar geometry. In 2, the Cu²⁺ ion is also coordinated to two py and two pfb species in addition to a water molecule in the apical site of a distorted CuN₂O₃ square pyramid. In the crystal packing, both 1 and 2 show segregated aromatic π-π stacking interactions in which (py + py) and (pfb + pfb) ring-pairings are seen, but no (py + pfb) pairings occur. Crystal data: 1: C₂₄H₁₀CuF₁₀N₂O₄, M_r = 643.88, space group , a = 8.0777 (3) Å, b = 8.0937 (3) Å, c = 10.5045 (5) Å, α = 90.916 (3)°, β = 93.189 (2)°, γ = 118.245 (3)°, V = 603.36 (4) Å³, Z = 1. 2: C₂₄H₁₂CuF₁₀N₂O₅, M_r = 661.90, space group , a = 7.5913 (5) Å, b = 15.6517 (6) Å, c = 21.1820 (14) Å, α = 95.697 (4)°, β = 94.506 (2)°, γ = 91.492 (4)°, V = 2495.2 (3) Å³, Z = 4.     

Germylene and stannylene (Me2NCH2CH2O)2E as strong σ-donor ligands for transition metal complexes [ML(CO)n] (E = Ge, Sn; M = Cr, Mo, W, n = 4 or 5; M = Fe, n = 4). Synthesis, spectroscopic and theoretical study

A series of germylene and stannylene (Me₂NCH₂CH₂O)₂E (E = Ge, 1; E = Sn, 2) complexes of group 6 metals and iron carbonyls L·M(CO)_n (M = Cr, Mo, W, n = 5 (3-8), n = 4 (9, 10); M = Fe, n = 4 (11, 12)) were prepared. These complexes were characterized by ¹H, ¹³C NMR, FTIR and elemental analysis. Ligand properties of 1 and 2 were compared to PPh₃ and dmiy (N,N′-dimethylimidazolin-2-ylidene) using theoretical calculations (PBE/TZ2P) and FTIR. Ligand dissociation energies increase in the order Ph₃P < 2∼1 < dmiy, while donor strength rise in the order PPh₃ < dmiy < 2 < 1.     

A general route for the synthesis of hydrido-carboxylate complexes of the type MH(CO)(κ-OCOR)(PPh3)2 [M = Ru,Os; R = CH3, CH2Cl,C6H5, CH(CH3)2] and their use as precatalysts for hydrogenation and hydroformylation reactions

The synthesis and solid-state IR, ¹H and ³¹P{¹H} NMR spectroscopic characterization of complexes of the type MH(CO)(κ³-OCOR)(PPh₃)₂ [M = Ru, Os; R = CH₃, CH₂Cl, C₆H₅ and CH(CH₃)₂] are reported in this paper. These compounds were obtained by reaction of the respective cationic complex [MH(CO)(NCMe)₂(PPh₃)₂]BF₄ with the sodium salt of the corresponding carboxylic acid in a 1:1 v/v dichloromethane/methanol solution at room temperature. The spectroscopic data of these complexes and some DFT calculations reveal an octahedral geometry with a bidentated carboxylate, two equivalent triphenylphosphines in a mutually trans positions, a linear hydride and a linear carbonyl both in the cis-positions of the coordination sphere. The catalytic results indicate that these complexes are efficient and regioselective precatalysts for the quinoline hydrogenation and for the hydroformylation of 1-hexene, under mild reaction conditions (130 °C and 4 atm H₂ and 120 °C and 15 atm H₂/CO, respectively). For benzothiophene hydrogenation, the osmium complexes showed low activities whereas the analogous ruthenium complexes were catalytically inactive under somewhat more drastic reaction conditions to those of the quinoline hydrogenation (140 °C and 10 atm H₂).     

Thiolate-bridged heterometallic complexes of manganese and platinum: Synthesis and molecular structures of (CO)4Mn(μ-SPh)Pt(PPh3)2, (CO)3(PPh3)Mn(μ-SPh)Pt(PPh3)(CO), and (CO)3Mn(μ-SPh)Pt(PPh3)(Dppm)

A reaction of the dimer [Mn(CO)₄(SPh)]₂ with (PPh₃)₂Pt(C₂Ph₂) gave the heterometallic complex (CO)₄Mn(μ-SPh)Pt(PPh₃)₂ (I) and its isomer (CO)₃(PPh₃)Mn(μ-SPh)Pt(PPh₃)(CO) (II). A reaction of complex I with a diphosphine ligand (Dppm) yielded the heterometallic complex (CO)₃Mn(μ-SPh)Pt(PPh₃)(Dppm) (III). Complexes I–III were characterized by X-ray diffraction. In complex I, the single Mn-Pt bond (2.6946(3) ?) is supplemented with a thiolate bridge with the shortened Pt-S and Mn-S bonds (2.3129(5) and 2.2900(6) ?, respectively). Unlike complex I, in complex II, one phosphine group at the Pt atom is exchanged for one CO group at the Mn atom. The Mn-Pt bond (2.633(1) ?) and the thiolate bridge (Pt-S, 2.332(2) ?; Mn-S, 2.291(2) ?) are retained. In complex III, the Mn-Pt bond (2.623(1) ?) is supplemented with thiolate (Pt-S, 2.341(2) ?; Mn-S, 2.292(2) 0?) and Dppm bridges (Pt-P, 2.240(1)?; Mn-P, 2.245(2) ?). Apparently, the Pt atom in complexes I–III is attached to the formally double bond , as in Pt complexes with olefins.     

Oxidative addition of the Mo-Cl bond to the Pt0 complex. Synthesis and structure of Cp′Mo(μ-CO)2(C2Ph2)Pt2(PPh3)2(CO)Cl

A reaction of Cp′Mo(CO)₃Cl(Cp′ = MeC₅H₄) with (PPh₃)₂Pt(C₂Ph₂) gave the heterometallic cluster Cp′Mo(μ-CO)₂(C₂Ph₂)Pt₂(PPh₃)₂(CO)Cl (I) as the sole product. According to X-ray diffraction data, complex I contains single Pt-Mo bonds (2.7962(5) and 2.7699(5) ?) but no Pt-Pt bond (Pt…Pt 2.9746(3) ?). The coordinated diphenylacetylene molecule forms two Pt-C σ-bonds (2.054(6) and 2.083(5) ?) and a π-bond to the Mo atom (Mo-C 2.265(6) and 2.272(5) ?; C≡C 1.387(8) ?). Original Russian Text ? A.A. Pasynskii, I.V. Skabitskii, Yu.V. Torubaev, S.S. Shapovalo, 2009, published in Koordinatsionnaya Khimiya, 2009, Vol. 35, No. 6, pp. 410–413.     

[M(dipicH2)(H2O)3], M = Ni,Cu, Zn (dipicH2 = dipicolinic acid) – A combined crystallographic,spectroscopic and computational study

Cationic metal complexes of dipicolinic acid (dipicH₂) are stabilized by [Ce(dipic)₃]²⁻ ions in the three isomorphous crystals [M(dipicH₂)(OH₂)₃][Ce(dipic)₃] · 3H₂O (M = Ni, 1; Cu, 2; Zn, 3). Magnetic dilution provided by the bulky anions leads to well-resolved EPR spectra in polycrystalline samples of 2. The cations have 4+2 coordination, the carbonyl atom of the carboxylic acid groups coordinating weakly from trans positions. In the case of 2 this steric distortion is augmented by Jahn–Teller distortion. All the three structures are satisfactorily modelled by calculations based on density functional theory (DFT). The switch of the Jahn–Teller axis upon deprotonation of the complex, leading to the neutral species Cu(dipic)(H₂O)₃, is also reproduced by DFT. Electronic transition energies as well as the g-tensor component of the d⁹ complex obtained are in good agreement with experiment. However, the calculated hyperfine coupling constants are in error. DFT also fails to satisfactorily account for the electronic transition in the d⁸ ion in 1.     

Photochemical reactions of W(CO)6 with hydrosilanes: synthesis, spectroscopic characteristic, and crystal structure of W(CO)3(η-PhSiHPh2)

Photolysis of W(CO)₆ in the presence of Ph₃SiH in n-heptane leads to the formation of the first tricarbonyl(η⁶-triphenylhydrosilane)tungsten complex W(CO)₃(η⁶-PhSiHPh₂) (1) in good yield (ca. 70%). The molecular structure of the new tungsten-silane compound was established by single-crystal X-ray diffraction studies and characterized by IR, UV-Vis, ¹H, ¹³C{¹H}, and ²⁹Si{¹H} NMR spectroscopy.     

Synthesis and structure of the monometallic cationic complex [Cp(CO)2Fe{η-(CH2CHCH2CH3)}]PF6 (Cp = η-C5H5)

The bimetallic carbocation complex [{Cp(CO)₂Fe}₂(μ-C₄H₇)]PF₆ reacted with trifluoroacetic acid to give the mononuclear cationic complex [Cp(CO)₂Fe{η²-(CH₂CHCH₂CH₃)}]PF₆, which formed yellow orthorhombic crystals in the space group P2₁2₁2₁ with a = 7.652(4), b = 13.422(7), c = 14.037(7); α = β = γ = 90.00 and Z = 4. The carbocation is coordinated to the metal in a η²-fashion forming a chiral metallacyclopropane type structure. The β-CH carbon (C9) is disordered over two positions (C9A and C9B), each having about 50% occupancy. This is attributed to there being both the R and S enantioface isomers in equal amounts in the crystal sample. NMR data indicate that the metallacyclopropane structure observed in the solid state is preserved in solution.     

Relativistic scalar and spin-orbit density functional calculations of the electronic structure, NICS index and ELF function of the [Re2(CO)8(μ-BiPh)2] and [Re2(CO)8(μ-BiPh2)2] clusters

Relativistic scalar and spin-orbit density functional calculations of the electronic structure, Nucleus-Independent Chemical Shift (NICS) index and ELF function of the [Re₂(CO)₈(μ-BiPh)₂] and [Re₂(CO)₈(μ-BiPh₂)₂] clusters are reported. We show here that the [Re₂(CO)₈(μ-BiPh)₂] cluster has large negative NICS values in the region defined by the Re-Bi-Re-Bi four-membered ring and the ELF function shows significant electron delocalization density in the center of the metallic ring, thus indicating an aromatic cluster. In contrast the Re-Bi-Re-Bi four-membered ring in the [Re₂(CO)₈(μ-BiPh₂)₂] cluster has negligible paratropic ring currents and the ELF function shows a low-density region within the metallic ring indicating that aromaticity is switched off. However, the phenyl ligands in both clusters show the expected aromatic character.     

对苯二甲酸二丙炔醇酯与Co2(CO)8、Mo2Cp2(CO)4和RuCo2(CO)11的反应

室温下对苯二甲酸二丙炔醇酯分别与Co2CO8Mo2Cp2CO4和RuCo2CO11反应得到三个有机金属化合物C6H4pCO2CH2C2Hμ2Co2CO621、C6H4pCO2CH2C2H2RuCo2CO922和HC2CH2OCOC6H4pCO2CH2C2HμMo2Cp2CO43。研究发现三种金属核对端炔氢的屏蔽作用依次为RuCo2CO9>Co2CO6>Mo2CO4Cp2。化合物1的晶体衍射发现属三斜晶系空间群a=8.1392b=8.8083c=11.3433β=96.2606°V=773.443Z=1Dc=1.748g·cm-3R=0.0513wR=0.1266。