New oxorhenium complexes with 2-(2′-hydroxyphenyl)-2-benzoxazolinato ligand. X-ray structure and DFT calculations for [ReOX2(hbo)(AsPh3)] and [ReOX2(hbo)(PPh3)] complexes

The reactions of [ReOX₃(AsPh₃)₂] and [ReOX₃(PPh₃)₂] with 2-(2′-hydroxyphenyl)-2-benzoxazoline (Hhbo) have been examined and [ReOX₂(hbo)(AsPh₃)] and [ReOX₂(hbo)(PPh₃)] (X = Cl, Br) complexes have been obtained. The crystal and molecular structures of [ReOCl₂(hbo)(AsPh₃)] (1) and [ReOBr₂(hbo)(PPh₃)] (4) have been determined. The electronic structures of 1 and 4 have been calculated with the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 and 4 have been calculated with the time-dependent DFT method, and the UV–Vis spectra of these complexes have been discussed.     

Oxorhenium(V) complexes with quinoline-2-carboxylate ligand. X-ray structure of [ReOCl2(quin-2-c)(PPh3)] and [ReOBr2(quin-2-c)(AsPh3)] complexes: DFT and TD-DFT calculations for [ReOCl2(quin-2-c)(PPh3)]

Novel [ReOX₂(quin-2-c)(EPh₃)] complexes (X = Cl, Br; E = As, P; quin-2-c = quinoline-2-carboxylate ion) have been prepared by treatment of [ReOX₃(EPh₃)₂] with quinoline-2-carboxylic acid in acetone at room temperature. All the complexes were characterised by IR, UV–Vis spectroscopy and elemental analysis. The crystal and molecular structures have been determined for [ReOCl₂(qiun-2c)(PPh₃)] (1) and [ReOBr₂(qiun-2c)(AsPh₃)] (4). The electronic structure of 1 has been calculated with the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 have been calculated with the time-dependent DFT method.     

Synthesis,spectroscopic characterization,crystal and molecular structure of [ReOX2(bopyH)(PPh3)] complexes: DFT calculations for [ReOCl2(bopyH)(PPh3)]

The reactions of [ReOX₃(PPh₃)₂] (X = Cl, Br) with benzoylpyridine (bopy) have been examined and novel [ReOX₂(bopyH)(PPh₃)] oxocompounds have been obtained. The complexes were structurally and spectroscopically characterised. In the both structures two-electron reduced form of benzoylpyridine is coordinated to the central ion. The electronic structure of [ReOCl₂(bopyH)(PPh₃)] has been calculated with the density functional theory (DFT) method, and additional information about binding has been obtained by NBO analysis. The UV–Vis spectrum of the [ReOCl₂(bopyH)(PPh₃)] has been discussed on the basis of TDDFT calculations.     

Reactivity of [ReOX3(PPh3)2] and [ReOX3(AsPh3)2] towards 2-(2-hydroxyphenyl)-1H-benzimidazole: Synthesis, X-ray studies, spectroscopic characterization and DFT calculations for [ReOX2(hpb)(EPh3)] and [ReO(OMe)(hpb)2]·MeCN

The paper presents a combined experimental and computational study of mono- and disubstituted Re(V) oxocomplexes obtained in the reactions of [ReOX₃(EPh₃)₂] (X = Cl, Br; E = P, As) with 2-(2-hydroxyphenyl)-1H-benzimidazole (Hhpb). From the reactions of [ReOX₃(PPh₃)₂] with Hhpb in molar ratio 1:1 cis and trans stereoisomers of [ReOX₂(hpb)(PPh₃)] were isolated, whereas the [ReOX₃(AsPh₃)₂] oxocompounds react with Hhpb to give only cis-halide isomers. The [ReOX₂(hpb)(EPh₃)] and [ReO(OMe)(hpb)₂]·MeCN complexes have been characterized spectroscopically and structurally (by single-crystal X-ray diffraction). The DFT and TDDFT calculations have been carried out for the trans-[ReOBr₂(hpb)(PPh₃)], cis-[ReOBr₂(hpb)(AsPh₃)] and [ReO(OMe)(hpb)₂], and their UV–Vis spectra have been discussed on this basis.     

Novel rhenium(III) complexes with the picolinate ligand: Synthesis,spectroscopic investigations,X-ray structures and DFT calculations for [ReX2(pic)(PPh3)2] complexes

The paper presents a combined experimental and computational study of novel rhenium(III) complexes with the picolinate ligand – [ReCl₂(pic)(PPh₃)₂] (1) and [ReBr₂(pic)(PPh₃)₂] (2). Both complexes 1 and 2 have been characterised spectroscopically and structurally (by single-crystal X-ray diffraction). Complex 1 has been additionally studied by magnetic measurement. The magnetic behavior is characteristic of a mononuclear d⁴ low-spin octahedral Re(III) complex (³T_1g ground state) and arises because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives a diamagnetic ground state. DFT and time-dependent (TD)DFT calculations have been carried out for complex 1, and UV–vis spectra of the [ReX₂(pic)(PPh₃)₂] compounds have been discussed on this basis.     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Synthesis,spectroscopic characterization,crystal and molecular structure of [ReOBr(hmquin-7-COOH)2] and [ReOCl(hmquin-7-COOH)2] · MeCN complexes. DFT and TD-DFT calculations for [ReOBr(hmquin-7-COOH)2]

Novel [ReOBr(hmquin-7-COOH)₂] (1) and [ReOCl(hmquin-7-COOH)₂] · MeCN (2 · MeCN) complexes have been prepared by treatment of [ReOX₃(AsPh₃)₂] with an excess of 8-hydroxy-2-methylquinoline-7-carboxylic acid in acetonitrile. The compounds were characterized structurally and spectroscopically. The electronic structure of 1 has been calculated with the density functional theory (DFT) method, and additional information about binding has been obtained by NBO analysis. The UV–Vis spectrum of 1 has been discussed on the basis of TDDFT calculations.     

Syntheses and properties of Re(III) complexes derived from hydrotris(1-pyrazolyl)methanes: molecular structure of [ReCl2(HCpz3)(PPh3)][BF4]

The complexes [ReCl₂{N₂C(O)Ph}(Hpz)(PPh₃)₂] (1) (Hpz = pyrazole), [ReCl₂{N₂C(O)Ph}(Hpz)₂(PPh₃)] (2), [ReCl₂(HCpz₃)(PPh₃)][BF₄] (3) and [ReCl₂(3,5-Me₂Hpz)₃(PPh₃)]Cl (4) were obtained by treatment of the chelate [ReCl₂{η²-N,O-N₂C(O)Ph}(PPh₃)₂] (0) with hydrotris(1-pyrazolyl)methane HCpz₃ (1,3), pyrazole Hpz (1,2), hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me₂pz)₃ (4) or dimethylpyrazole 3,5-Me₂Hpz (4). Rupture of a C(sp³)-N bond in HCpz₃ or HC(3,5-Me₂pz)₃, promoted by the Re centre, has occurred in the formation of 1 or 4, respectively. All compounds have been characterized by elemental analyses, IR and NMR spectroscopy, FAB-MS spectrometry, cyclic voltammetry and, for 1 · CH₂Cl₂ and 3, also by single crystal X-ray analysis. The electrochemical E_L Lever parameter has been estimated, for the first time, for the HCpz₃ and the benzoyldiazenide NNC(O)Ph ligands.     

Synthesis,spectroscopic investigation,structural characterization and DFT calculation of the complexes [ReX2(N2COPh)(4-PhPyr)(PPh3)2] (X = Cl, Br)

The reactions of [ReX₂(η²-N₂COPh-N′,O)(PPh₃)₂] with 4-phenylpyrimidine have been performed. As a result, the two complexes [ReX₂(N₂COPh)(4-PhPyr)(PPh₃)₂] (X = Cl, Br) (4-PhPyr = 4-phenylpyrimidine), isostructural in the solid state, have been obtained. The crystal and molecular structures of ([ReCl₂(N₂COPh)(4-PhPyr)(PPh₃)₂])₂·CHCl₃ (1) and ([ReBr₂(N₂COPh)(4-PhPyr)(PPh₃)₂])₂·CHCl₃ (2) have been determined. The electronic structure of [ReCl₂(N₂COPh)(4-PhPyr)(PPh₃)₂] has been examined using the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 have been calculated with the time-dependent DFT method, and the UV–Vis spectrum of [ReCl₂(N₂COPh)(4-PhPyr)(PPh₃)₂] has been discussed on this basis.     

Simple protocol for the synthesis of the asymmetric PCP pincer ligand [C6H4-1-(CH2PPh2)-3-(CH(CH3)PPh2)] and its Pd(II) derivative [PdCl{C6H3-2-(CH2PPh2)-6-(CH(CH3)PPh2)}]

The asymmetric PCP pincer ligand [C₆H₄-1-(CH₂PPh₂)-3-(CH(CH₃)PPh₂)] (4) has been synthesized in a facile manner in three simple steps in high yield. Metallation of PCP pincer ligand (4) with [Pd(COD)Cl₂] affords complex [PdCl{C₆H₃-2-(CH₂PPh₂)-6-(CH(CH₃)PPh₂)}] (7) in good yield.     

Novel oxorhenium complexes with 2-(2′-hydoxy-5′-methylphenyl)benzotriazolato ligand. X-ray studies,spectroscopic characterization and DFT calculations

The [ReOCl₂(hmpbta)(AsPh₃)] · MeCN, [ReOBr₂(hmpbta)(AsPh₃)] · MeCN, [ReOCl₂(hmpbta)(PPh₃)] · MeCN, [ReOBr₂(hmpbta)(PPh₃)] · MeCN, and [ReBr₂(hmpbta)(PPh₃)] · MeCN complexes have been prepared in the reactions of [ReOX₃(EPh₃)₂] (X = Cl, Br; E = P, As) with 2-(2’-hydoxy-5′-methylphenyl)benzotriazole in molar ratio 1:1. All the compounds were structurally and spectroscopically characterized. The electronic structure of [ReOCl₂(hmpbta)(AsPh₃)] has been calculated with the density functional theory (DFT) method. The TDDFT/PCM calculations have been employed to produce a hundred of singlet excited-states starting from the ground-state geometry optimized in the gas phase, and the UV–Vis spectrum of [ReOCl₂(hmpbta)(AsPh₃)] has been discussed on this basis. The paper reports also X-ray structure and DFT calculations for the disubstituted [ReOCl(hmpbta)₂] chelate.     

Synthesis and characterization of some novel ruthenium(II) complexes containing thiolate ligands

Reactions of the ruthenium complexes [RuH(CO)Cl(PPh₃)₃] and [RuCl₂(PPh₃)₃] with hetero-difunctional S,N-donor ligands 2-mercapto-5-methyl-1,3,5-thiadiazole (HL¹), 2-mercapto-4-methyl-5-thiazoleacetic acid (HL²), and 2-mercaptobenzothiazole (HL³) have been investigated. Neutral complexes [RuCl(CO)(PPh₃)₂(HL¹)] (1), [RuCl(CO)(PPh₃)₂(HL²)] (2), [RuCl(CO)(PPh₃)₂(HL³)] (3), [Ru(PPh₃)₂(HL¹)₂] (4), [RuCl(PPh₃)₃(HL²)] (5), and [RuCl(PPh₃)₃(HL³)] (6) imparting κ²-S,N-bonded ligands have been isolated from these reactions. Complexes 1 and 4 reacted with diphenyl-2-pyridylphosphine (PPh₂Py) to give neutral κ¹-P bonded complexes [RuCl(CO)(κ¹-P-PPh₂Py)₂(HL¹)] (7), and [Ru(κ¹-P-PPh₂Py)₂(HL¹)₂] (8). Complexes 1-8 have been characterized by analytical, spectral (IR, NMR, and electronic absorption) and electrochemical studies. Molecular structures of 1, 2, 4, and 7 have been determined crystallographically. Crystal structure determination revealed coordination of the mercapto-thiadiazole ligands (HL¹-HL³) to ruthenium as κ²-N,S-thiolates and presence of rare intermolecular S-S weak bonding interaction in complex 1.     

A 2-iridathiophene from reaction between IrCl(CS)(PPh3)2 and Hg(CHCHPh)2

The thiocarbonyl analogue of Vaska’s compound is produced in high yield by first treating IrCl(CO)(PPh₃)₂ with CS₂ and methyl triflate to give [Ir(κ²-C[S]SMe)Cl(CO)(PPh₃)₂]CF₃SO₃ (1), secondly, reacting 1 with NaBH₄ to give IrHCl(C[S]SMe)(CO)(PPh₃)₂ (2), and finally heating 2 to induce elimination of both MeSH and CO to produce IrCl(CS)(PPh₃)₂ (3). When IrCl(CS)(PPh₃)₂ is treated with Hg(CHCHPh)₂ the novel 2-iridathiophene, Ir[SC₃H(Ph-3)(CHCHPh-5)]HCl(PPh₃)₂ (4) is produced. The X-ray crystal structure of the iodo-derivative of 4, Ir[SC₃H(Ph-3)(CHCHPh-5)]HI(PPh₃)₂ (5) confirms the unusual 2-metallathiophene structure. Treatment of IrCl(CS)(PPh₃)₂ with Hg(CHCPh₂)₂ produces both a coordinatively unsaturated 1-iridaindene, Ir[C₈H₅(Ph-3)]Cl(PPh₃)₂ (6) and a chelated dithiocarboxylate complex, Ir(κ²-S₂CCHCPh₂)Cl(CHCPh₂)(PPh₃)₂ (7). X-ray crystal structure determinations for 6 and 7 are reported.     

Novel rhenium oxocomplexes of indazole-3-carboxylic acid – Synthesis,X-ray studies,spectroscopic characterization and DFT calculations

Three novel rhenium oxocomplexes incorporating indazole-3-carboxylate ligand: cis-[ReOCl₂(Ind-3-COO)(PPh₃)]·OPPh₃ (1a), cis-[ReOCl₂(Ind-3-COO)(PPh₃)] (1b) and cis-[ReOBr₂(Ind-3-COO)(PPh₃)]·OPPh₃ (2) have been synthesized and characterised spectroscopically and structurally (by single-crystal X-ray diffraction). The 1a and 2 are isostructural in solid state. The electronic spectrum of 1a was investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ. Additional information about binding in the complex 1a was obtained by NBO analysis.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Tandem transmetallation and oxidative addition reactions of [Sn(R)2(Ph2PC6H4-2-S)2] with transition metal complexes of the Group 9

The reactions of [Sn(Ph)₂(Ph₂PC₆H₄-2-S)₂] with trans -[M(Cl)(CO)(PPh₃)₂] M=Ir, Rh afford the complexes [Rh(Ph₂PC₆H₄-2-S)₂(SnClPh₂)] (1) and [Ir(CO)(Ph₂PC₆H₄-2-S)₂(SnClPh₂)] (2) as final products of two processes, a transmetallation reaction and an oxidative addition process. The crystal structures of both complexes have been determined, showing the rhodium compound to be into a slightly distorted square base pyramidal geometry, while that of the iridium derivative can be described as a distorted octahedron.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Oxorhenium(V) complexes with bidentate carbohydrazide Schiff bases: synthesis,characterization and DNA interaction studies

The respective coordination reactions of trans-[ReOCl₃(PPh₃)₂] with N-[(4-oxo-4H-chromen-3-yl)methylidene]thiophene-2-carbohydrazide (Hchrtc) and N-[1,3-benzothiazol-2-ylmethylidene]thiophene-2-carbohydrazide (Hbztc) afforded two novel oxorhenium(V) complexes, cis-[ReOCl₂(chrtc)(PPh₃)] (1) and cis-[ReOCl₂(bztc)(PPh₃)] (2). These metal compounds were elucidated spectroscopically and their solid-state structures determined by single-crystal X-ray diffraction. The redox properties of the metal complexes were probed using cyclic and square wave voltammetry. The DNA interaction capabilities of 1 and 2 were gauged via UV/Vis spectroscopy DNA titrations and gel electrophoresis studies. A correlation is identified between the DNA cleavage observations and the redox potentials of the metal complexes.