Dinuclear oxomolybdenum(VI) acetylacetonates: Crystal and molecular structure of Mo2O5(acac)2L2 (L = D2O,DMF)

The behavior of MoO₂(acac)₂ (acac = acetylacetonate) towards representative amines, amides, sulfoxides and phosphine oxides in common solvents has been examined. Compounds of the composition Mo₂O₅(acac)₂L₂ [L = H₂O, D₂O, dimethylformamide (DMF), dimethylacetamide (DMA), dimethylbenzamide (DMBA), tetramethylurea (TMU), dimethylsulfoxide (DMSO), dibutylsulfoxide (Bu₂SO), p-tolylsulfoxide (p-Tol₂SO), tributylphosphine oxide (OPBu₃), triphenylphosphine oxide (OPPh₃), hexamethylphosphoramide (HMPA)], derived from partial hydrolysis of MoO₂(acac)₂ followed by condensation and coordination of L, can readily be isolated. The crystal and molecular structures of Mo₂O₅(acac)₂L₂ (L = D₂O, DMF) have been established by X-ray diffraction analysis.     

Reactivity studies of phenylcalcium iodide towards THF yielding phenyl-free cage compounds - Crystal structures of [{(thf)Ca(O-CHCH2)2}4 · CaO · CaI2] and [(CaO)4 · 4 (thf)3CaI2]

THF proved to be the favoured solvent for the direct synthesis of phenylcalcium iodide. However, ether degradation is the major side reaction in this solvent. Zinc-mediated degradation of THF leads to the formation of the cage compound [{(thf)Ca(O-CHCH₂)₂}₄ · CaO · CaI₂] (1) besides the zincate [(thf)₆Ca] [ZnEt₂Ph₂]. The structure of 1 shows an oxygen-centered Ca₆ octahedron with iodine atoms bound to two opposite corners. Heating of phenylcalcium iodide in THF solution for several hours yields [(CaO)₄ · 4 (thf)₃CaI₂] (2) with a central Ca₄O₄ heterocubane unit. NMR monitoring of the reaction shows that the phenyl groups are converted to benzene due to α-deprotonation of THF.     

Synthesis, spectroscopic studies and crystal structure of (Et4N)(SnMe3)7(HAsO4)4 · 2H2O

On allowing tetraethylammonium dihydrogen arsenate dihydrate to react with trimethyltin chloride, the title compound has been obtained and characterized by infrared, Mössbauer and NMR techniques. Its crystal structure has been determined and consists of layers containing both corner sharing AsO₄H tetrahedra and trans-O₂SnC₃entities. It contains large cavities in which tetraethylamonium cations are located.     

New effective reagent [Cp2ZrH2 · ClAlEt2]2 for alkene hydrometallation

New bimetallic complex [Cp₂ZrH₂ · ClAlEt₂]₂ (1) was synthesized, and its reactivity in hydrometallation reaction with the following alkenes was studied: hept-1-ene, okt-1-ene, α-methylstyrene, (1S)-β-pinene, (+)-camphene. Complex 1 shows the highest reactivity among the other known Al,Zr-bimetallic complexes: [Cp₂ZrH₂ · ClAlBuⁱ₂]₂ (2), [Cp₂ZrH₂ · AlEt₃]₂ (3), [Cp₂ZrH₂ · AlBuⁱ₃]₂ (4) and [Cp₂ZrH₂ · HAlBuⁱ₂] (5) as well as organoaluminium compounds (OAC): ⁱBu₂AlH, ⁱBu₃Al and ⁱBu₂AlCl in presence of Zr catalysts. Chlorine containing complexes 1 and 2 appear to be more effective in alkene hydrometallation, and relative hydrometallation rates are (1S)-β-pinene ? (+)-camphene < α-methylstyrene < oct-1-ene < hept-1-ene. Hydrometallation of (1S)-β-pinene and its subsequent oxidation with I₂ run with high diastereoselectivity and yield trans-myrtanol. However, the diastereoselectivity of (+)-camphene hydrometallation is less than that for (1S)-β-pinene, and the reaction gives predominately endo-camphanol.     

Syntheses and study on nickel and copper complexes with 1,3,5-benzenetricarboxylic acid. Crystal and molecular structure of [Cu3(mdpta)3(btc)](ClO4)3 · 4H2O

Nickel and copper complexes containing 1,3,5-benzenetricarboxylic acid, with a combination of selected N-donor ligands and Schiff bases, of the composition Ni₃(bimz)₆(btc)₂ · 12H₂O (1), Ni₃(btz)₉(btc)₂ · 12H₂O (2), Ni₂(L₁)(btc) · 7H₂O (3), Ni₃(L₂)₂(Hbtc) · 9H₂O (4), Ni₂(L₃)(btc) · 4H₂O (5), Cu₂(L₄)(btc) · 7H₂O (6), [Cu₃(pmdien)₃(btc)](ClO₄)₃ · 6H₂O (7) and [Cu₃(mdpta)₃(btc)](ClO₄)₃ · 4H₂O (8); H₃btc = 1,3,5-benzenetricarboxylic acid, bimz = benzimidazole, btz = 1,2,3-benztriazole, L₁ = 2-[(phenylimino)methyl]phenol, L₂ = N,N′-bis-(salicylidene)propylenediamine, L₃ = 2-{[(2-nitrophenyl)methylene]amino}phenol, L₄ = 2-[(4-methoxy-phenylimino)methyl]phenol, pmdien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, mdpta = N,N-bis-(3-aminopropyl)methylamine, have been synthesized. The complexes have been studied by elemental analysis, IR, UV–Vis spectroscopies, magnetochemical and conductivity measurements and selected compounds also by thermal analysis. The crystal and molecular structure of complex 8 was solved. The complex is trinuclear with btc³⁻-bridge. The coordination polyhedron around each copper atom can be described as a distorted square with a CuON₃ chromophore formed by one oxygen atom of carboxylate and three nitrogen atoms of mdpta. The magnetic properties of 8 have been studied in the 1.8–300 K temperature range revealing a very weak antiferromagnetic exchange interaction with J = −0.56 cm⁻¹ for g = 2.13(9). The antimicrobial activities against selected strains of bacteria were evaluated. It was found that only complex 5 is able to inhibit the growth of Staphylococcus strains.     

Thermodynamic properties on quaternary aqueous solutions of chlorides charge-type 1-1*2-1*2-1: XCl + MgCl2 + CaCl2 + H2O with (X ≡ Na; NH4)

In this investigation, the quaternary aqueous solutions of chlorides charge-type 1-1*2-1*2-1 with a cation (Na⁺; NH₄⁺; Mg²⁺; Ca²⁺) have been studied using the hygrometric method at 298.15 K. The water activities of the systems NH₄Cl + MgCl₂ + CaCl₂ + H₂O and NaCl + MgCl₂ + CaCl₂ + H₂O are measured at total molalities from 0.60 mol kg⁻¹ to saturation for different ionic-strength fractions NH₄Cl or NaCl, y = 0.20, 0.50, 0.80, and z ratio ionic-strength for other solutes, with z = 0.20, 0.50 and 0.80 for each y. The obtained data allow the deduction of osmotic coefficients.     

A novel Mo(V) oligophosphate built up of di- and triphosphate groups: Cs(MoO)4(P2O7)2(P3O10)

A Mo(V) oligophosphate, built up of di and triphosphate groups, Cs(MoO)₄(P₂O₇)₂(P₃O₁₀) has been synthesized for the first time. This compound crystallizes in the triclinic P−1 space group with , , , α=94.534(6)°, β=102.520(6)°, γ=103.663(4)°. This original structure can be described by the association of MoO₆ octahedra, MoP₂O₁₁ units built up of one P₂O₇ group sharing two apices with the same MoO₆ octahedron, and triphosphates groups P₃O₁₀. The resulting tridimensional framework forms large S-shaped tunnels running along c where the Cs⁺ cations are located.     

Reactivity of benzil bis(4-methyl-3-thiosemicarbazone) with cadmium nitrate. Crystal structure of [Cd(LMe2H4)(NO3)2][Cd(LMe2H4)(NO3)(H2O)]NO3 · H2O

The reaction between cadmium nitrate dihydrate and benzil bis(4-methyl-3-thiosemicarbazone), LMe₂H₄, depends on the working conditions. In methanol the reaction gives the novel complex [Cd(LMe₂H₄)(NO₃)₂][Cd(LMe₂H₄)(NO₃)(H₂O)]NO₃ · H₂O (1). Its crystal structure shows the presence of two cadmium atoms with different coordination numbers, seven and eight, and the ligands acting as N₂S₂ neutral molecules. One cadmium has the coordination sphere completed by a bidentate nitrato group and a water molecule, whereas the other one is bonded to two bidentate nitrato groups. Both molecules are joined to one nitrate ion and to an additional water molecule by hydrogen bonds. In the presence of lithium hydroxide, the reaction leads to a binuclear complex with the ligand doubly deprotonated [Cd(LMe₂H₂)]₂ (2). The complexes were characterized by elemental analysis, mass spectrometry, ¹³C and ¹¹³Cd CP/MAS NMR and, in the case of complex 1, by X-ray diffraction.     

Vibrational spectroscopy of the sorosilicate mineral hemimorphite Zn4(OH)2Si2O7 · H2O

Raman spectroscopy complimented by infrared spectroscopy has been used to study the mineral hemimorphite from different origins. The Raman spectra show consistently similar spectra with only one sample showing additional bands due to the presence of smithsonite. Raman bands observed at 3510–3565 and 3436–3455 cm⁻¹ are assigned to OH stretching vibrations. Using a Libowitzky type formula, these OH bands provide hydrogen bond distances of 0.2910, 0.2825, 0.2762 and 0.2716 pm. Water bending modes are observed in the Raman spectrum at 1633 cm⁻¹. An intense Raman band at 930 cm⁻¹ is attributed to SiO symmetric stretching vibration of the Si₂O₇ units. Raman bands observed at 451 and 400 cm⁻¹are attributed to out-of-plane bending vibrations of the Si₂O₇ units. Raman bands at 330, 280, 168 and 132 cm⁻¹ are assigned to ZnO and OZnO vibrations.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Stabilisation of heterobimetallic networks by crown ethers and hydrogen-bonding in [Ni(H2O)6][Cu3Cl8(H2O)2] · (15-crown-5)2 · 2H2O: Structure and magnetism

[Ni(H₂O)₆][Cu₃Cl₈(H₂O)₂] · (15-crown-5)₂ · 2H₂O can be conveniently prepared by the interaction of NiCl₂ · 6H₂O, CuCl₂ · 2H₂O and 15-crown-5 in water. The X-ray crystal structure reveals an ionic complex involved in a hydrogen-bonded two dimensional network with the [Ni(H₂O)₆]²⁺ and [Cu₃Cl₈(H₂O)₂]²⁻ ions sandwiched between the 15-crown-5 macrocycles. The magnetic susceptibility data (4–300 K) and magnetisation isotherms (2–5.5 K; 0–5 T) are best interpreted in terms of intra-trimer ferromagnetic coupling within the [Cu₃Cl₈(H₂O)₂]²⁻ moieties, with J ∼ 6 cm⁻¹, and antiferromagnetic coupling between the trimers, the latter mediated by H-bonding pathways. Comparisons are made to other reported quaternary ammonium salts of [Cu₃Cl₈]²⁻ and [Cu₃Cl₁₂]⁶⁻, most of which display structures that involve close stacking of such Cu(II) trimers, rather than being of the present isolated, albeit H-bonded, types.     

A large series of isotypic Mo(V) diphosphates with a tunnel structure: From A(MoO)10(P2O7)8 with A=Ba, Sr, Ca, Cd, Pb to A(MoO)5(P2O7)4 with A=Ag, Li, Na, K

The single crystal structure of a series of nine isotypic Mo(V) diphosphates was determined from crystals with composition A²⁺(MoO)₁₀(P₂O₇)₈ (A=Ba, Sr, Ca, Cd, Pb) and A⁺(MoO)₅(P₂O₇)₄ (A=Ag, Li, Na, K). The structure of those phosphates, built up of corner sharing MoO₆ octahedra, MoO₅ tetragonal pyramids and P₂O₇ diphosphates groups, forms eight-sided tunnels as described by Lii et al. for A=Ag. New features are evidenced: (1) existence of two orientations, up and down along b for the MoO₅ pyramids; (2) maximum insertion rate of the divalent cations which is twice less than that of the univalent cations; (3) different behavior of the series “Pb, Sr, Ba, Li, Na, K” which exhibits only one kind of site for the inserted cation, compared to the “Cd, Ca, Ag” series for which two kinds of sites are observed; (4) off-centering of the A-site cations with respect to the tunnel axis; and (5) unusually high thermal factors along the tunnel axis, but absence of ionic conductivity.     

Two new metal derivates of the alumosiloxane [Ph2SiO]8[AlO(OH)]4: [Ph2SiO]8[AlO2(Na)]4 · 5(THF) and [Ph2SiO]8[AlO(OH)]2[AlO2]2[Zn(OH)]2 · 2(OEt2)

When the polycyclic alumosiloxane [Ph₂SiO]₈[AlO(OH)]₄ is allowed to react with either cyclopentadienyl sodium in tetrahydrofuran or with dimethyl zinc in diethyl ether the organic ligands on the metal elements are eliminated as cyclopentadiene or methane and the metals are bonded to oxygen atoms in the alumosiloxane forming [Ph₂SiO]₈[AlO₂(Na)]₄ · 5(THF) or [Ph₂SiO]₈[AlO(OH)]₂[AlO₂]₂[Zn(OH)]₂ · 2(OEt₂), respectively. X-ray structure determinations reveal that in the sodium derivative the original polycycle rests almost unchanged while in the zinc derivative the inner skeleton is rearranged.     

Molecular complexes of octafluoronaphthalene with catenated chalcogen-nitrogen compounds C6H5-X-NSN-SiMe3 (X = S, Se)

Mismatched molecular 1:1 complexes of C₁₀F₈ with catenated chalcogen-nitrogen compounds C₆H₅-X-NSN-SiMe₃ (X = S, Se) were prepared and characterized by X-ray crystallography. The complexes provide examples of structurally non-rigid polyheteroatom molecules involved in non-covalent arene-polyfluoroarene π-stacking interactions. In going from homocrystals to the co-crystals, the molecular Z, E configuration of the catenated compounds changes from noticeably non-planar to perfectly planar, i.e. C₁₀F₈ acts as “molecular iron”. On the other hand, C₁₀H₈ does not produce complexes with C₆F₅-X-NSN-SiMe₃ (X = S, Se).     

Synthesis, characterization, and fluorescent properties of two Pb(II) complexes: {[Pb(hca)2·DMF]·DMF}∞ and [Pb(hca)2(phen)·DMF]2

Two novel Pb(II) complexes, {[Pb(hca)₂·DMF]·DMF}_∞ and [Pb(hca)₂(phen)·DMF]₂ (hca=trans-4-hydroxycinnamic group), were obtained by solid-phase reactions of PbAc₂ and Hhca and PbAc₂, Hhca, and phen, respectively, and characterized by spectroscopy. X-ray crystallography analysis reveals that complex 1, {[Pb(hca)₂·DMF]·DMF}_∞, adopts a 2-dimensional structure through the weak interactions of Pb and O atoms and that complex 2, [Pb(hca)₂(phen)·DMF]₂, shows a discrete dimeric structure, in which hydrogen bonds link the dimers into a 2D network. Both complexes 1 and 2 show visible fluorescence and the intensity is stronger than that of the ligand. More interestingly, the intensity of emission was increased at least fivefolds when the pH of the solution was adjusted to alkalinity. This can be attributed to that the deprotonization of phenolic group enhancing the conjugation of the ligand hca. These results indicate that this method may be an effective way to increase the emission intensity of similar complexes.     

Cluster compounds [Ca(DMF)6][Mo6Cl14] and [{Ca(OPPh3)4}{Mo6Cl14}]∞: Synthesis, crystal structure, and properties

The [Ca(DMF)₆][Mo₆Cl₁₄] complex (I) was synthesized by reacting octahedral cluster Mo complex (H₃O)₂Mo₆Cl₁₄·6H₂O with the Ca²⁺ cation in DMF. Analogous reaction carried out in the presence of triphenylphosphine oxide Ph₃PO in acetonitrile resulted in [{Ca(OPPh₃)₄}{Mo₆Cl₁₄}] (II). According to X-ray diffraction data, complex I has ionic structure, while the structure of complex II consists of infinite linear chains of the cluster anionic complexes {Mo₆Cl₁₄}²⁻ bonded to the cationic Ca complexes {Ca(OPPH₃)₄}²⁺. Both complexes exhibit intensive luminescence in red and near-IR regions of the spectrum. Original Russian Text ? Zh.S. Kozhomuratova, Yu.V. Mironov, M.A. Shestopalov, Ya.M. Gaifulin, N.V. Kurat’eva, E.M. Uskov, V.E. Fedorov, 2007, published in Koordinatsionnaya Khimiya, 2007, Vol. 33, No. 1, pp. 3–8.     

Crystal structure and magnetic properties of [{Cu(cyclam)}3{Fe(CN)6}2] · 6H2O,a cyano-bridged assembly with a rope-ladder chain structure

The synthesis, crystal structure and magnetic properties of the cyano-bridged complex [{Cu(cyclam)}₃{Fe(CN)₆}₂] · 6H₂O are reported. Its structure is made up of centrosymmetric S-shaped pentanuclear [{Cu(cyclam}₃{Fe(CN)₆)}₂] units, in which three [Cu(cyclam)]²⁺ units are alternatively bridged by two trans-CN groups of [Fe(CN)₆]³⁻ anions and water molecules. The pentanuclear Fe₂Cu₃ units are held together by two complementary and very weak Fe–CN?Cu1 bonds, forming a rope-ladder chain along the c axis. The compound exhibits a ferromagnetic interaction between the Cu(II) and Fe(III) ions as a consequence of the orthogonality of their magnetic orbitals of σ and π nature, respectively. The magnetic data were fitted to the calculated magnetic susceptibility equation for a pentanuclear model, leading to the following magnetic parameters: J₁ = 9.0(3) cm⁻¹, J₂ = 3.8(4) cm⁻¹, g = 2.2, θ = −1.2 K. These results show that the interactions through the long Cu–N axial bonds are not so weak as is usually assumed.     

Synthesis, crystal structure and bioactivity of a novel 18-metallacrown-6 [Mn6(H2O)6 (anshz)6] · 10DMF

A novel macrocyclic hexanuclear manganese(III) 18-metallacrown-6 compound, [Mn₆(H₂O)₆ (anshz)₆] · 10DMF, has been prepared using a trianionic pentadentate ligand N-acetyl-5-nitrosalicylhydrazide (anshz³⁻) and characterized by X-ray diffraction (DMF = N,N-dimethylformamide). The crystal structure contains a neutral 18-membered metallacrown ring consisting of six Mn(III) and six anshz³⁻ ligands. The 18-membered metallacrown ring is formed by the succession of six structural moieties of the type [Mn(III)NN]. Due to the meridional coordination of the ligand to the Mn³⁺ ion, the ligand enforces the stereochemistry of the Mn³⁺ ions as a propeller configuration with alternating Δ/Λ forms. The disc-shaped hexanuclear ring shows at its largest diameter about 7.14 Å at entrance, about 9.76 Å at the center of the cavity, respectively. Antibacterial screening data showed that the manganese metallacrown has strong antimicrobial activity against Bacillus subtilis.     

Bis(silylaminodiarylphosphoranylsilylmethyl-C,N)-tin(II) and -lead(II) complexes and their precursors; structures of H(LL′), H(LL″), Sn(LL″)2 and Pb(LL″)2; [LL′] = [CH(SiMe3)P(Ph)2NSiMe3],

We report a series (a)-(d) of tandem reactions involving the conversion of: (a) 2CH₂(SiMe₃)P(Ph)₂NSiMe₃ [2H(LL′)] (III) into successively [Li(LL′)]₂ (1a) and [Pb(LL′)₂] (3a); (b) 1a in turn into {[Li(LL″)]₂} (2) and [Pb(LL″)₂] (4); (c) 1a successively into Sn(LL′)Cl (5) and [Sn(LL″)₂] (6); (d) (1b) into (3b). Experimental details for the preparation and characterisation (including elemental analysis and multinuclear NMR spectra in C₆D₆ and EI mass spectra) of 1a, 2, 3a, 3b, 4, 6, III (a new synthesis) and IV are provided. The X-ray structures of crystalline 4, 6, III and IV are presented; those of 1a, 2 and 3a were previously published.