New platinum compounds containing the diphosphine ligand 2-(ferrocenylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (fbpcd): Synthesis, redox behavior, and X-ray diffraction structures of PtCl2(fbpcd) and Pt(mnt)(fbpcd)

The reaction of the redox-active diphosphine ligand 2-(ferrocenylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (fbpcd) with PtCl₂(1,5-cod) furnishes the platinum(II) compound PtCl₂(fbpcd) (2). Treatment of 2 with disodium maleonitriledithiolate (Na₂mnt) yields the chelating thiolate compound Pt(mnt)(fbpcd) (3). Both 2 and 3 have been fully characterized in solution by IR, UV–Vis, and NMR spectroscopies, and their molecular structures established by X-ray crystallography. The redox properties of the fbpcd ligand and compounds 2 and 3 have been investigated by cyclic voltammetry, and the composition of the HOMO and LUMO levels in these systems have been determined by extended Hückel MO calculations, the results of which are discussed with respect to electrochemical data.     

Synthesis and diphosphine ligand fluxionality in Os3(CO)10(bmi): Kinetic evidence for nondissociative diphosphine isomerization and X-ray crystal structure of 1,1-Os3(CO)10(bmi)

The triosmium cluster 1,2-Os₃(CO)₁₀(MeCN)₂ reacts rapidly with the diphosphine ligand 2,3-bis(diphenylphosphino)-N-p-tolylmaleimide (bmi) at room temperature to give bmi-bridged cluster 1,2-Os₃(CO)₁₀(bmi) (2b) as the major product, along with the chelating isomer 1,1-Os₃(CO)₁₀(bmi) (2c) and the hydride-bridged cluster HOs₃(CO)₉[μ-(PPh₂)CC{PPh(C₆H₄)}C(O)N(tolyl-p)C(O)] (3) as minor by-products. All three cluster compounds have been isolated and fully characterized in solution by IR and NMR spectroscopies (¹H and ³¹P), and X-ray crystallography in the case of 2c. Cluster 2b is unstable and readily isomerizes to 2c in quantitative yield on mild heating. The kinetics for the conversion of 2b → 2c have been measured over the temperature range of 318-348 K in toluene solution, and based on the observed activation parameters a nondissociative isomerization process that proceeds via a transient μ₂-bridged phosphine moiety is presented. Near-UV photolysis of cluster 2c at room temperature affords HOs₃(CO)₉[μ-(PPh₂)CC{PPh(C₆H₄)}C(O)N(tolyl-p)C(O)] (3) with a quantum yield of 0.017. The reactivity of clusters 2b, 2c, and 3 is discussed with respect to related diphosphine-substituted Os₃(CO)₁₀(P-P) clusters prepared by our groups.     

Pincer ligand coordination at a triosmium cluster: X-ray structures of 1,2-Os3(CO)10[4,6-bis(diphenylphosphinomethyl)-m-xylene] and 1,2-Os3(CO)10[1-diphenylphosphino-1-{(2,4-dimethyl-5-diphenylphosphinomethyl)phenyl}-propan-2-ol]

The reaction between the triosmium cluster 1,2-Os₃(CO)₁₀(MeCN)₂ and the diphosphine pincer ligand 4,6-bis(diphenylphosphinomethyl)-m-xylene (dppx) has been examined and found to yield the pincer-bridged cluster 1,2-Os₃(CO)₁₀(dppx) (2) as the major product, in addition to the pincer-bridged cluster 1,2-Os₃(CO)₁₀[1-diphenylphosphino-1-{(2,4-dimethyl-5-diphenylphosphinomethyl)phenyl}-propan-2-ol] (3) in trace amounts (<2% yield). Both cluster products have been isolated and their molecular structures determined by crystallographic analyses. The structural highlights of compounds 2 and 3, which represent the first examples of pincer-ligated metal clusters, are discussed. The origin of the functionalized diphosphine ligand in 3 is traced to the ethanol solvent that was used in the recrystallization of the dppx ligand.     

Novel rhenium(III) complexes with the picolinate ligand: Synthesis,spectroscopic investigations,X-ray structures and DFT calculations for [ReX2(pic)(PPh3)2] complexes

The paper presents a combined experimental and computational study of novel rhenium(III) complexes with the picolinate ligand – [ReCl₂(pic)(PPh₃)₂] (1) and [ReBr₂(pic)(PPh₃)₂] (2). Both complexes 1 and 2 have been characterised spectroscopically and structurally (by single-crystal X-ray diffraction). Complex 1 has been additionally studied by magnetic measurement. The magnetic behavior is characteristic of a mononuclear d⁴ low-spin octahedral Re(III) complex (³T_1g ground state) and arises because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives a diamagnetic ground state. DFT and time-dependent (TD)DFT calculations have been carried out for complex 1, and UV–vis spectra of the [ReX₂(pic)(PPh₃)₂] compounds have been discussed on this basis.     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

A new phenylimidorhenium(V) compound containing the 2-[(2-hydroxyethylimino)methyl]phenol Schiff-base ligand: experimental and theoretical aspects

Reaction of equimolar trans-[Re(NPh)(PPh₃)₂Cl₃] with H₂L, a 1?:?1 Schiff-base condensate of salicylaldehyde and ethanolamine, in chloroform gives trans-[Re(NPh)(HL)(PPh₃)Cl₂] (1a) in good yield. 1a has been characterized by C, H, and N microanalyses, FTIR and UV–vis spectra. The X-ray crystal structure of 1a reveals that it is an octahedral trans-Cl,Cl phenylimidorhenium(V) complex. The rhenium center has an ‘N₂OCl₂P’ coordination sphere. 1a crystallizes in the monoclinic space group P2₁/c with a = 11.2391(5), b = 16.4848(7), c = 16.3761(8) Å, V = 3034.0(2) ų and Z = 4. The electrochemical aspects of 1a have been studied. Electrochemical studies of 1a in dichloromethane show a quasi-reversible Re(V) to Re(VI) oxidation at 1.128 V versus Ag/AgCl. This redox potential reasonably matches the calculated redox potential, 1.186 V versus Ag/AgCl. Geometry optimization of the trans-Cl,Cl 1a vis-à-vis its cis analog, cis-Cl,Cl 1b, have been performed at the level of density functional theory (DFT). It is revealed that 1a is more stable than 1b by 21.6 kcal per mole of energy in the gas phase.     

Preparation and characterization of [Re(bpy)(CO) 3L][SbF6] (L = phosphine, phosphite)

A series of rhenium complexes [fac-Re(bpy)(CO)₃L][SbF₆] (bpy = 2,2′-bipyridine, L = P(ⁿBu)₃, PEt₃, PPh₃, P(OMe)Ph₂, P(OⁱPr)₃, P(OEt)₃, P(OMe)₃, P(OPh)₃) has been prepared and characterized by the IR, UV-vis, ¹H NMR, ³¹P NMR, X-ray photoelectron spectroscopy and electrochemical techniques. Variations in the electronic properties, i.e. CO stretching, metal-to-ligand charge transfer transition, and ³¹P NMR chemical shifts were interpreted on the basis of the electron-acceptor strength of L. However, the redox potential corresponding to [Re(bpy)(CO)₃L]⁺/[Re(bpy⁻)(CO)₃L]showed ‘V-character type’ changes after the increase in the electron-acceptor strength of L. Variation of the P(2p) binding energy of the phosphorus atom indicated that the electronic structure of the coordinated phosphorus atom was strongly influenced by the electronic properties of the directly attached substituents.     

Ligand substitution in HC(O)CCo3(CO)9 with 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd): Diphosphine ligand fluxionality, decarbonylation of the formyl moiety and competitive P-Ph bond cleavage reactivity

The reaction of the formyl-capped cluster HC(O)CCo₃(CO)₉ (1) with the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) in the presence of added Me₃NO leads to the production of the disubstituted cluster HC(O)CCo₃(CO)₇(bpcd) (2). Thermolysis of 2 in toluene at 60 °C gives the methylidyne-capped cluster HCCo₃(CO)₇(bpcd) (4) and the phosphido-bridged cluster Co₃(CO)₇[μ₂,η²,η¹-P(Ph)CC(PPh₂)C(O)CH₂C(O)] (5). Cluster 4 has been independently prepared from HCCo₃(CO)₉ and bpcd and shown to serve as the precursor to 5. The new clusters 2, 4, and 5 have been isolated and characterized in solution by IR and NMR (¹H and ³¹P) spectroscopies and their solid-state structures have been established by X-ray diffraction analyses. Both clusters 2 and 4 contain 48e- and exhibit triangular Co₃ cores with a chelating and bridging bpcd ligand in the solid state, respectively. The structure of 5 provides unequivocal support for the loss of the methylidyne capping ligand and P-Ph bond cleavage attendant in the activation of 4 and confirms the presence of the face capping seven-electron μ₂,η²,η¹-P(Ph)CC(PPh₂)C(O)CH₂C(O) ligand in the final product. The fluxionality displayed by the bpcd ligand in clusters 2 and 4 and the decarbonylation behavior of the formyl moiety in the former cluster are discussed relative to related alkylidyne-capped Co₃ derivatives.     

The coordinatively unsaturated cluster cations [Pt3{M(CO)3}(μ-Ph2PCH2PPh2)3] (M = Re, Mn)

The coordinatively unsaturated cluster [Pt₃(μ₃-CO)(μ-dppm)₃]²⁺ (1, dppm = Ph₂PCH₂PPh₂) reacts with Na⁺[M(CO)₅]⁻ to give the mixed metal clusters [Pt₃{M(CO)₃}(μ-dppm)₃]⁺ (M = Re, 2; Mn, 3). The new clusters are characterized by spectroscopic methods and, for M = Re, by an X-ray structure determination. The Pt₃Re core in 2 is tetrahedral with particularly short metal-metal distances.     

Synthesis, characterization and electrochemical studies of the heterometallic diclusters [{Fe2(μ-CO)(CO)6(μ-PPh2)Au}2(diphosphine)] (diphosphine=dppm, dppip, dppe, dppp)

Treatment of [(ClAu)₂(diphosphine)] {diphosphine=bis(diphenylphosphino)methane (dppm), bis(diphenylphosphino)isopropane (dppip), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp)} with two equivalents of the anion [Fe₂(μ-CO)(CO)₆(μ-PPh₂)]⁻ in the presence of TlBF₄ gives the new heterometallic diclusters [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₂(diphosphine)] that have been isolated and characterized. Their ³¹P-NMR spectra show different patterns as a function of the diphosphine ligand. The electrochemical behavior of these compounds has been investigated and compared with that of the mono- [Fe₂(μ-CO)(CO)₆(μ-PPh₂)(μ-AuPPh₃)] and tricluster [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₃(triphos)] derivatives.     

Synthesis, characterization, photoluminescence and electroluminescence properties of new 1,3,4-oxadiazole-containing rhenium（I） complex Re（CO）3（Bphen）（PTOP）

A new 1,3,4-oxadiazole-contanining rhenium(I) complex,with the formula [Re(CO)_3(Bphen)(PTOP)],(Bphen=bathophe- nardine,PTOP=4-(5-p-tolyl-1,3,4-oxadiazd-2-yl)pyridine),is synthesized and characterized by elemental analysis,IR,~1H NMR, UV-vis and luminescence spectroscopy.The double-layer electroluminescence devices based on the Re(I) complex have been fabricated by spin-coating technique.The turn-on voltage,maximum efficiency,and brightness for green emission obtained from the devices are 9V,2.1cd/A and 165cd/m~2,respectively.     

Preparation and characterization of 3-(4,5-ethylenedithio-1,3-dithiol-2-ylidene)naphthopyranone: a luminescent redox-active donor-acceptor compound

A new 1,3-dithiol-2-ylidene substituted naphthopyranone 2 has been synthesized and characterized. UV-vis spectroscopic and cyclic voltammetry results, interpreted on the basis of density functional theory, show that 2 displays an intramolecular charge-transfer transition and acts like a donor-acceptor (D-A) system. Furthermore, a weak fluorescence originating from the excited charge-transfer state is observed.     

Seven-coordinate rhenium(III) complexes of 1-(2-pyridylazo)-2-naphtholate: X-ray studies,spectroscopic characterization and DFT calculations

The reactions of [ReX₃(MeCN)(PPh₃)₂] (X = Cl or Br) with 1-(2-pyridylazo)-2-naphthol (HPAN) have been examined and the [ReBr(PAN)₂] · 2CHCl₃ (1) and [ReCl(PAN)₂] (2) complexes have been obtained. The both complexes have been structurally and spectroscopically characterized, and compound 1 has been additionally studied by magnetic measurements. The magnetic behavior is characteristic of mononuclear seven-coordinated Re(III) complex with d⁴ low-spin configuration, which gives diamagnetic ground state.     

Synthesis,spectroscopic characterisation,crystal and molecular structure of [ReOBr(quin-2-c)2] and [ReOCl(quin-2-c)2] complexes: DFT and TD-DFT calculations for [ReOBr(quin-2-c)2]

Novel [ReOX(quin-2-c)₂] complexes (X = Cl, Br; quin-2-c = quinoline-2-carboxylate ion) have been prepared by treatment of [ReOX₃(AsPh₃)₂] with an excess of quinoline-2-carboxylic acid in acetonitrile. The complexes were characterised structurally and spectroscopically. The electronic structure of [ReOBr(quin-2-c)₂] has been calculated with the density functional theory (DFT) method, and additional information about binding has been obtained by NBO analysis. The UV–Vis spectrum of [ReOBr(quin-2-c)₂] has been discussed on the basis of TD-DFT calculations.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

New chloro- and trifluoroacetato tricarbonylrhenium(I) complexes with a N,N′-bis(benzophenone)-1,2-diiminoethane Schiff base ligand: Spectral and structural studies

The reaction of Re(CO)₅Cl with the chelating ligand N,N′-bis(benzophenone)-1,2-diiminoethane (bz₂en) afforded the neutral fac-[Re(CO)₃(bz₂en)Cl]. The subsequent reaction with AgOCOCF₃ gave fac-[Re(CO)₃(bz₂en)OCOCF₃]. Their pseudooctahedral fac structures have been established by FTIR, UV–Vis, ¹H, ¹³C NMR and have been confirmed by X-ray diffraction analysis. The electrochemical behaviour of the investigated complexes has been studied by cyclic voltammetry.     

Synthesis, X-ray studies, spectroscopic characterization and DFT calculations of p-tolylimido rhenium(V) complexes bearing an imidazole-based ligand

Novel p-tolylimido rhenium(V) complexes [Re(p-NC₆H₄CH₃)X₂(hpb)(PPh₃)] and [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]X (X = Cl, Br) have been obtained in the reactions of [Re(p-NC₆H₄CH₃)X₃(PPh₃)₂] with 2-(2-hydroxyphenyl)-1H-benzimidazole (Hhpb). The compounds were identified by elemental analysis IR, UV-Vis spectroscopy and X-ray crystallography. The electronic structures of the complex [Re(p-NC₆H₄CH₃)Cl₂(hpb)(PPh₃)] and the cation [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]⁺ have been calculated with the density functional theory (DFT) method. Additional information about binding in the [Re(p-NC₆H₄CH₃)Cl₂(hpb)(PPh₃)] and [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]⁺ has been obtained by NBO analysis. The electronic spectra of [Re(p-NC₆H₄CH₃)Cl₂(hpb)(PPh₃)] and [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]Cl were investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ.     

New oxorhenium complexes with the 8-quinolinolato ligand: X-ray structure and DFT calculations for [ReOBr(hqn)2]

The reactions of [ReO(OEt)X₂(PPh₃)₂] (X = Cl or Br) with 8-hydroxyquinoline (Hhqn) have been examined and the [ReOX(hqn)₂] complexes have been obtained. The crystal and molecular structures of [ReOBr(hqn)₂] have been determined. The electronic structure of [ReOBr(hqn)₂] has been calculated with the density functional theory (DFT) method, and additional information about binding in the ReO³⁺ unit has been obtained by NBO analysis. The spin-allowed electronic transitions of [ReOBr(hqn)₂] have been calculated with the time-dependent DFT method, and the UV–Vis spectra of the [ReOX(hqn)₂] compounds have been discussed on this basis.     

Regiospecific and sequential P-C bond activation/cluster transformations in the reaction of PhCCo2MoCp(CO)8 with the diphosphine ligands 2,3-bis(diphenylphosphino)maleic anhydride (bma) and 3,4-bis(diphenylphosphino)-5-methoxy-2(5H)-furanone (bmf)

Thermolysis of the mixed-metal cluster PhCCo₂MoCp(CO)₈ (1) with the diphosphine ligand 2,3-bis(diphenylphosphino)maleic anhydride (bma) in CH₂Cl₂ leads to the sequential formation of the phosphido-bridged cluster Co₂MoCp(CO)₅[μ₂,η²,η¹-C(Ph)CC(PPh₂)C(O)OC(O)](μ-PPh₂) (3) and the bis(phosphido)-bridged cluster Co₂MoCp(CO)₄[η³,η¹,η¹-C(Ph)CCC(O)OC(O)](μ-PPh₂)₂ (4). 3 and 4 have been isolated and characterized in solution by IR and NMR (¹H, ¹³C, and ³¹P) spectroscopies, and the solid-state structures have been established by X-ray diffraction analyses. Both clusters contain 48e- and exhibit triangular Co₂Mo cores. The structure of 3 reveals the presence of a phosphido moiety that bridges the Co-Co vector and a six-electron μ₂,η²,η¹-C(Ph)CC(PPh₂)C(O)OC(O) ligand that caps one of the Co₂Mo faces. The X-ray structure of 4 confirms that the five-electron η³,η¹,η¹- C(Ph)CCC(O)OC(O) ligand is σ-bound to the two cobalt centers in an η¹ fashion and π-coordinated to the molybdenum center through a traditional η³-allylic interaction. The reaction between PhCCo₂MoCp(CO)₈ and the chiral diphosphine ligand 3,4-bis(diphenylphosphino)-5-methoxy-2(5H)-furanone (bmf) proceeds similarly, furnishing the phosphido-bridged cluster Co₂MoCp(CO)₅ [μ₂,η²,η¹-C(Ph)CC(PPh₂)C(O)OCH(OMe)](μ-PPh₂) (6), followed by conversion to Co₂MoCp(CO)₄[η³,η¹,η¹-C(Ph)CCC(O)OCH(OMe)](μ-PPh₂)₂ (7). The identities of clusters 6 and 7 have been ascertained by solution spectroscopic methods and X-ray crystallography. The overall molecular structure of cluster 6 is similar to that of cluster 3, except that the P-C(furanone ring) bond cleavage occurs with high regioselectivity and high diastereoselectivity. The cleavage of the remaining P-C(furanone ring) bond in cluster 6 gives rise to the bis(phosphido)-bridged cluster 7, whose structure is discussed relative to its bma-derived analogue 4. The diastereoselectivity that accompanies the formation of 6 and 7 is discussed relative to steric effects within the Co₂Mo polyhedron. The cyclic voltammetric properties of cluster 3 have been examined, with three well-defined one-electron processes for the 0/+1, 0/−1, −1/−2 redox couples found. The composition of the HOMO and LUMO in 3 was established by extended Hückel MO calculations, with the data discussed relative to the parent tetrahedrane cluster 1.