PtRu/carbon nanotube nanocomposite synthesized in supercritical fluid: a novel electrocatalyst for direct methanol fuel cells

Platinum/ruthenium nanoparticles were decorated on carbon nanotubes (CNT) in supercritical carbon dioxide, and the nanocomposites were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). TEM images show that the particles size is in the range of 5-10 nm, and XRD patterns show a face-centered cubic crystal structure. Methanol electrooxidation in 1 M sulfuric acid electrolyte containing 2 M methanol were studied onPtRu/CNT (Pt, 4.1 wt%; Ru, 2.3 wt%; molar ratio approximately Pt/Ru = 45:55) catalysts using cyclic voltammetry, linear sweep voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. All the electrochemical results show that PtRu/CNT catalysts exhibit high activity for methanol oxidation which resulted from the high surface area of carbon nanotubes and the nanostructure of platinum/ruthenium particles. Compared with Pt/CNT, the onset potential is much lower and the ratio of forward anodic peak current to reverse anodic peak current is much higher for methanol oxidation, which indicates the higher catalytic activity of PtRu/CNT. The presence of Ru with Pt accelerates the rate of methanol oxidation. The results demonstrated the feasibility of processing bimetallic catalysts in supercritical carbon dioxide for fuel cell applications.     

Platinum nanoparticles from the hydrosilylation reaction: capping agents, physical characterizations, and electrochemical properties

Platinum nanoparticles synthesized by a unique synthetic approach, the hydrosilylation reaction, have been reported previously. However, the interaction between the underlying platinum nanosupport and the capping agents is poorly understood. Here we continue to investigate Pt nanoparticles from the hydrosilylation reaction to address this issue and present the characterization results of nuclear magnetic resonance, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. These characterization results conclude that two different modes of binding of the aliphatic capping agents with the platinum surface are attributed to the formation of Pt-C bonds under excess olefin concentration and Pt-Si bonds under excess hydrosilane concentration. Morphology and UV-vis spectra of the platinum nanoparticles were explored by transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy. Moreover, electrochemical properties of the platinum nanoparticles were also studied by cyclic voltammetry and chronoamperometry.     

纳米铂颗粒的控制生长

Different size platinum nanoparticles, ranging in size from 1.8-14.1 nm, were prepared by multi-step reduction of H2PtCl6 by hydrogen adsorbed on platinum atoms. Transmission electronic microscopy and X-ray diffraction were used to characterize the nanoparticles. After thirty-two iterations of the reaction, the diameter of platinum nanoparticles increased from 1.8 nm to 14.1 nm. The average iterative increase was approximately 0.4 nm. The size distribution of the nanoparticles was narrow. Synthesis procedures which allow for control of platinum nanoparticle size offer the possibility for the further research into how the sizes of nano-catalysts effect catalytic activity.     

Synthesis of nanostructured electrocatalysts based on magnetron ion sputtering

Nanostructured platinum catalysts for electrochemical systems with proton-exchange membranes (PEMs) have been synthesized by magnetron ion sputtering on a carbon support. The design of the powder support stirrer has been optimized to ensure uniform surface coverage with platinum metal nanoparticles. The deposition parameters (discharge power, deposition time, and bias voltage) that make it possible to obtain electrocatalysts with a large specific surface area (up to 44 m²/g) have been determined. The resulting catalysts have been studied by transmission electron microscopy and X-ray diffraction. The samples with platinum particles 3 to 4 nm in size uniformly distributed over the carbon surface and forming a single phase exhibit the greatest efficiency. The electrodes based on the synthesized electrocatalysts have been tested in a liquid electrolyte and as a component of a fuel cell and PEM water electrolyzer. The voltage across the fuel cell with the synthesized Pt/C electrocatalyst (44 m²/g) at a current density of 1 A/cm² is as high as 0.55 V, which corresponds to a specific power of 550 mW/cm². Qualitative correlations between the parameters of the synthesized catalysts and the deposition conditions have been established.     

二氧化锡/石墨烯柔性电极的制备及其在锂离子电池中的应用

采用简便的抽滤装置制备了三明治结构的不同粒径大小的二氧化锡(SnO_2)/石墨烯柔性薄膜电极,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、原子力显微镜(AFM)、比表面积(BET)和电化学等测试技术手段对样品结构、形貌和电化学性能进行表征,研究了二氧化锡颗粒大小对复合电极电化学性能的影响。结果表明,当SnO_2纳米颗粒的粒径为6 nm时柔性复合电极表现出最优的电化学性能,在100 m A/g的电流密度下经过100次循环后,可逆比容量保持在555 m A·h/g,远高于纯SnO_2和粒径过大或过小的SnO_2/石墨烯复合电极。     

Size Control of FePt Nanoparticles Produced by Seed Mediated Growth Process

Monodisperse FePt nanoparticles with average size of 2.4?nm were successfully synthesized via chemical co-reduction of iron acetylacetonate, Fe(acac)₃, and platinum acetylacetonate, Pt(acac)₂, by 1,2-hexadecanediol as a reducing agent and oleic acid and oleyl amine as surfactant. Then using the seed mediated growth process smaller sized FePt nanoparticles are used as seeds for the growth of larger sized FePt particles and there is no specific limitation to achieve upper size range by this method. In this work, we could synthesize FePt nanoparticles up to 4.0?nm. Monodispersity with relatively narrow size distribution and having the same elemental composition with the atomic percentage of Fe _x Pt_100?x (x?=?63) are the main advantages of this method. As-made FePt nanoparticles have the chemical disordered face centered cubic structure with superparamagnetic behavior at room temperature. After annealing these particles become ferromagnetic with high magnetocrystalline anisotropy and their coercivity increases with increasing particle sizes and reaches a maximum value of 5,200?Oe for size of 46.5?nm     

用于吖内酯合成的二氧化钛纳米晶体材料(英文)

Titanium dioxide nanoparticles were prepared by a electrochemical reduction method using para-meters such as current density, solvent polarity, distance between electrodes, and concentration of stabilizers to control the size of the nanoparticles. The nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microsco-py, and their catalytic performance was tested for the synthesis of a series of 4-aryldiene-2-phenyl-5(4)-oxazolones from the cyclodehydration and condensation of the respec-tive aldehyde, hippuric acid and acetic anhydride. Easy availability, reusability and eco-friendliness were some prominent features of the nanocrystalline titanium dioxide catalyst.     

用于吖内酯合成的二氧化钛纳米晶体材料PriyankaAnandgaonker,GaneshKulkarni,SureshGaikwad,AnjaliRajbhoj简

Titanium dioxide nanoparticles were prepared by a electrochemical reduction method using parameters such as current density, solvent polarity, distance between electrodes, and concentration of stabilizers to control the size of the nanoparticles. The nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy, and their catalytic performance was tested for the synthesis of a series of 4-aryldiene-2-phenyl-5(4)-oxazolones from the cyclodehydration and condensation of the respective aldehyde, hippuric acid and acetic anhydride. Easy availability, reusability and eco-friendliness were some prominent features of the nanocrystalline titanium dioxide catalyst.     

交替微波加热法对制备氧还原催化剂性能的影响

详细研究了交替微波加热法制备多壁碳纳米管负载Pt催化剂(Pt/MWCNTs)的过程中交替微波加热(5s-on/5s-off)次数对催化剂性能的影响.X射线粉末衍射(XRD)结果表明,Pt的晶粒尺寸在开始的加热阶段基本上没有发生变化,但是随着加热次数的增多,Pt的晶粒尺寸逐步增大.采用循环伏安法和旋转圆盘电极技术考察了催化剂的电化学活性.结果显示,以5s-on/5s-off加热20次时,催化剂显示出最佳的催化活性;在0.5mol· L-1 H2SO4饱和氧水溶液中催化剂的氧还原起峰电位接近1.0 V(vs RHE).交替微波加热法简单经济,在大批量制备催化剂等纳米材料方面显示出较好的应用前景.     

Preparation and characterization of PtAu hybrid film modified electrodes and their use in simultaneous determination of dopamine, ascorbic acid and uric acid

A novel biosensor was fabricated by electrochemical deposition of platinum and gold nanoparticles (nanoAu) with l-Cysteine on glassy carbon electrode. It was found that the nanoAu particle size distribution range was (50-80 nm), and the platinum particle size range was (200-300 nm). The hybrid film could be produced on gold and transparent indium tin oxide electrodes for different kind of studies such as electrochemical quartz crystal microbalance (EQCM), scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) and electrochemical studies. The PtAu hybrid film was applied to the electro catalytic oxidation of dopamine (DA), ascorbic acid (AA) and uric acid (UA) at pH 4.0 using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The modified electrode was quite effective not only to detect DA, AA and UA individually but also in simultaneous determination of these species in a mixture. The overlapping anodic peaks of DA, AA and UA were resolved into three well-defined voltammetric peaks in CV and DPV. The catalytic peak currents obtained from CV and DPV increased linearly with concentration. The relative standard deviation (% R.S.D., n = 10) for AA, DA and UA were less than 2.0% and DA, AA and UA can be determined in the ranges of 0.103-1.65, 0.024-0.384 and 0.021-0.336 mM, respectively. In addition, the modified electrode also shows good sensitivity, and stability. Satisfactory results were achieved for the determination of DA, AA and UA in dopamine injection solution, vitamin C tablets and human urine samples.     

A novel “green” synthesis of starch-capped CdSe nanostructures

This paper reports a “green” facile, room temperature, one-pot synthesis of starch-capped CdSe nanostructures with an obvious quantum confinement effect via a novel non-organometallic method. It is found that by simply tuning the Cd:Se molar ratio, dots and elongated particles of high aspect ratio could be prepared selectively in the presence of the same ligand concentration without any post-treatment. Spherical particles were produced at 1:1 ratio, while elongated particles were produced at 0.5:1 Cd:Se ratio. The X-ray diffraction (XRD) analysis showed that the particles were predominantly of wurtzite structure, with sharp diffraction patterns regardless of their size and shapes. We inferred that the elongated particles are formed by self-reorganisation occurring via adhesion between the spherical nanoparticles as a result of dipole–dipole interactions.     

Synthesis of Silver and Gold Nanoparticles by a Novel Electrochemical Method

Spherical silver and gold nanoparticles with narrow size distributions were conveniently synthesized in aqueous solution by a novel electrochemical method. The technological keys to the electrochemical synthesis of monodispersed metallic nanoparticles lie in the choice of an ideal stabilizer for the metallic nanoclusters and the use of a rotating platinum cathode. Poly(N‐vinylpyrrolidone) (PVP) was chosen as the stabilizer for the silver and gold clusters. PVP not only protects metallic particles from agglomeration, but also promotes metal nucleation, which tends to produce small metal particles. Using a rotating platinum cathode effectively solves the technological difficulty of rapidly transferring the (electrochemically synthesized) metallic nanoparticles from the cathode vicinity to the bulk solution, avoiding the occurrence of flocculates in the vicinity of the cathode, and ensuring the monodispersity of the particles. The particle size and particle size distribution of the silver and gold nanoparticles were improved by adding sodium dodecyl benzene sulfonate (SDBS) to the electrolyte. The electrochemically synthesized nanoparticles were characterized by TEM and UV/Vis spectroscopy.     

Electrochemical properties of carbon nanotube-supported metallic catalysts prepared by changing a sweep- or step-applied potential

The electrochemical deposition of Pt nanoparticles on carbon nanotube (CNTs) supports and their catalytic activities for an electro-oxidation were investigated. Pt catalysts of 4–12 nm average crystalline size were grown on supports by changing applied potential methods such as sweep-potential or step-potential. Electroplating of 24-min time by a step-applied potential was enough to obtain small crystalline-size 4.6-nm particles, resulting in good electrochemical activity. The catalysts’ loading contents could be controlled by increasing the deposition time. The crystalline sizes and structures of the Pt/support catalysts were analyzed using X-ray diffraction (XRD). The electrochemical properties of the Pt/support catalysts were studied according to their characteristic current–potential curves in a methanol solution. As a result, the electrochemical activity was increased by enlarging the plating time. The activity reached the maximum at 24 min and then decreased. The enhanced electroactivity for catalysts by step-potential methods could be explained by the changes of the crystalline size and crystalline structures of the catalysts.     

有序介孔二氧化硅-碳纳米管复合材料载Pt 及其电催化性能

以十六烷基三甲基溴化铵(CTAB)为结构导向剂, 正硅酸乙酯(TEOS)为硅源, 通过添加碳纳米管(CNTs), 制备介孔二氧化硅包覆碳纳米管网状结构的复合材料(C/Si). X 射线衍射(XRD)和透射电子显微镜(TEM)显示, 介孔二氧化硅的孔道结构高度有序, CNTs 均匀分散于二氧化硅刚性骨架中. 以其为载体微波负载制备了Pt-C/Si-x 纳米粒子催化剂,研究了催化剂在硫酸和甲醇溶液中电催化性能, 结果表明, 具有较高导电性能的复合材料保持了二氧化硅的均匀的孔道结构有利于电解液存储和质子传输, 使得该催化剂显示了良好的电催化活性. 其中碳纳米管添加含量为40 mg 时,催化剂在H₂SO₄ 电解液中的电化学活性面积高达120.9 m²·g^-1, 远大于Pt/CNTs 的电化学活性面积, 对甲醇的催化峰电流也达80.3 mA·cm^-2. 预示其作为直接甲醇燃料电池催化剂载体具有良好的应用前景.     

Über die Dispersität des Platins in Platin-Tonerde-Katalysatoren. 1. Bestimmung der Platin-Dispersität mittels Röntgenbeugung und Sauerstoff-Wasserstoff-Titration

On the dispersity of platinum in platinum/alumina catalysts. 1. Determination of the platinum dispersity by X-ray diffraction and oxygen-hydrogen titration. The metal dispersion in platinum-alumina catalysts was determined by X-ray diffraction and O₂? H₂-titration. The physico-chemical assumptions of both methods are discussed and the results are critically compared. From the X-ray measurements, the average size of the platinum crystallites was determined down to 20 Å and also the amount of both the crystalline and X-ray amorphous platinum. By O₂? H₂-titration the number of superficial Pt atoms and, by assumption of a defined area per Pt atom, the accessible Pt surface area was estimated. The Pt surface areas were also calculated from X-ray data. With small Pt concentrations and high Pt dispersion, the values obtained by both methods agree reasonably. Occurring differences are caused especially by the coverage of platinum crystallites by the alumina. The increase of information, obtained through combination of the two methods, is demonstrated for freshly reduced and tested catalysts.     

Production and structural characterization of crystalline silver nanoparticles from Bacillus cereus isolate

To date, biosynthesis of metal nanoparticles has been intensively studied using bacteria and fungi. We have isolated and identified metal resistant bacterial strains from electroplating industries, they produce silver nanoparticles. The reduction reaction of aqueous silver nitrate with bacterial biomass was carried out for 120 h. Bacteria produced metallic nanoparticles showed a strong absorbance at surface plasmon resonance wavelength around 420 nm. The size and morphology of these nanoparticles were typically imaged using high resolution transmission electron microscopy, the particles size ranges between 4 and 5 nm and are spherical in shape. The crystal structure of the particles was characterized by X-ray diffraction pattern. The full width half maxima from X-ray diffraction measurements indicated that the particles exhibited face-centered cubic phase.     

Electrocatalytic properties of platinum nanoparticles supported on fluorine tin dioxide/multi-walled carbon nanotube composites for methanol electrooxidation in acidic medium

Fluorine tin oxide (FTO) and multi-walled carbon nanotube (MWCNT) composites synthesized by a sol-gel process followed by a hydrothermal treatment process have been explored as a support for Pt nanoparticles (Pt-FTO/MWCNTs). X-ray diffraction analysis and high resolution transmission electron microscopy show that the Pt and FTO nanoparticles with crystallite size of around 4-8 nm are highly dispersed on the surface of MWCNTs. Pt-FTO/MWCNT catalyst is evaluated in terms of the electrochemical catalytic activity for methanol electrooxidation using cyclic voltammetry, steady state polarization experiments, and electrochemical impedance spectroscopy technique in acidic medium. The Pt-FTO/MWCNT catalyst exhibits a higher intrinsic catalytic activity for methanol electrooxidation with high stability during potential cycling than Pt nanoparticles supported on tin dioxide/multi-walled carbon nanotube composites. The results suggest that FTO/MWCNT composites could be considered as an alternative support for Pt-based electrocatalysts in direct alcohol fuel cells.     

Growth of layered basic zinc acetate in methanolic solutions and its pyrolytic transformation into porous zinc oxide films

Photo-induced reduction of gold and platinum metal salt solutions was carried out using viologen graft copolymerized on low-density polyethylene (LDPE) films and viologen-containing poly(vinylidene fluoride) (PVDF-PVBV) microporous membranes. The effects of the UV irradiation time and concentration of the metal salt solutions on the metal ion reduction process and the resultant metal deposition on the polymeric substrates were investigated. The metal-polymer composites were characterized using X-ray photoelectron spectroscopy (XPS), scanning and transmission electron microscopy (SEM and TEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and UV-visible absorption spectroscopy. The amount of metal uptake, the state of the metal, and the size of the metal particles were found to be strongly dependent on the UV irradiation time and the type and concentration of the metal salt solution. The microporous structure and the high viologen content of the PVDF-PVBV membrane constitute an effective matrix for metal ion reduction and preparation of metal nanoparticles.     

Supercritical Propanol-Water Synthesis and Comprehensive Size Characterisation of Highly Crystalline anatase TiO2 Nanoparticles

Highly crystalline anatase TiO₂ nanoparticles have been synthesised in less than 1 min in a supercritical propanol-water mixture using a continuous flow reactor. The synthesis parameter space (T, P, concentration) has been explored and the average particle size can be accurately controlled within 10-18 nm with narrow size distributions (2-3 nm). At subcritical conditions amorphous products are obtained, whereas a broad range of T and P in the supercritical regime gives 11-14 nm particles. At high temperature and pressure, the particles size increase to 18 nm. The nanoparticles have been extensively characterised with powder X-ray diffraction (PXRD), transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) with excellent agreement on size and size distribution parameters. The SAXS analysis suggests disk-shaped particles with diameters that are approximately double the height. For comparison, a series of conventional autoclave sol-gel syntheses have been carried out. These also produce phase-pure anatase nanoparticles, but with much broader size distributions and at much longer synthesis times (hours). The study demonstrates that synthesis in supercritical fluids is a very promising method for manipulating the size and size distribution of nanoparticles, thus removing one of the key limitations in many applications of nanomaterials.     

聚乙烯吡咯烷酮稳定的钯纳米粒子催化加氢

Nanosized colloidal platinum was prepared by reduction of H2PtCl6 in methanol-water mixture by refluxing. The particle size and morphology were characterized by transmission electron microscopy and electron diffraction. The influence of polyvinylpyrrolidone (PVP) molecular mass (MM),PVP concentration,and reduction time on platinum particle size was investigated. Small (1-2 nm) Pt particles are formed in the case of PVP with MM=1.2×104. With increasing polymer MM and decreasing polymer concentration,large aggregates from small particles appear. High catalytic activity of the obtained colloidal platinum in hydrogenation of acetylene compounds is shown. The effect of Pt particle size on the catalytic activity was studied.