Agricultural biomasses as sorbents of some trace metals

The studies of sorption of six metal ions (Cd²⁺, Cu²⁺, Pb²⁺, Zn²⁺, Ni²⁺, Cr³⁺ and Cr(VI)) from by-products of agriculture are taken into account. The Langmuir q_max values obtained with the use of different biomasses are evaluated and, in order to acquire comparable results, the necessity of using molar concentrations is stressed. The main effects of pH on sorption are estimated by considering both the behaviour of metal ions (hydrolysis and hydroxide precipitation) and the effect of pH on coordination, using a simulated example. Some considerations are made on the information that can be obtained using the most common isotherms and on the need to use chemical dimensions rather than weight in order to make comparison among various metal ions (since atomic weight differences deeply alter the significance of parameters in non-chemical units) and to predict the effects of competition between two (or more) of these for the same sorbent sites on the biomass surface.     

New sorbents and indicator powders for preconcentration and determination of trace metals in liquid samples

Two approaches to immobilize complex-forming analytical reagents (PAN, PAR, Xylenol orange, Brombenzothiazo, Crystal violet, Cadion, and Sulfochlorophenolazorhodanine) for the preparation of new sorbents and indicator powders are suggested: on-line coating of reversed-phase silica gel by reagents or doping of porous sol-gel silica with reagents. The retention of Ag, Cd, Cu(II), Co(II), Fe(III), Mn(II), Ni, Pb, and Zn on the sorbents developed was investigated. Quantitative sorption and desorption conditions were optimized. Procedures for the determination of Cd, Cu(II), Fe(III), Pb, and Zn with flame atomic absorption, spectrophotometric, and diffusion scattering spectrometric detection were elaborated. Detection limits for Cd, Cu(II), Fe(III), Pb, and Zn were 3 μg/L, 6 μg/L, 5 μg/L, 40 μg/L, and 1 μg/L, respectively. The procedures were used for the analysis of various real samples, e.g., natural and waste waters, and food. Received: 17 July 1997 / Revised: 20 January 1998 / Accepted: 5 February 1998     

New sorbents and indicator powders for preconcentration and determination of trace metals in liquid samples

Two approaches to immobilize complex-forming analytical reagents (PAN, PAR, Xylenol orange, Brombenzothiazo, Crystal violet, Cadion, and Sulfochlorophenolazorhodanine) for the preparation of new sorbents and indicator powders are suggested: on-line coating of reversed-phase silica gel by reagents or doping of porous sol-gel silica with reagents. The retention of Ag, Cd, Cu(II), Co(II), Fe(III), Mn(II), Ni, Pb, and Zn on the sorbents developed was investigated. Quantitative sorption and desorption conditions were optimized. Procedures for the determination of Cd, Cu(II), Fe(III), Pb, and Zn with flame atomic absorption, spectrophotometric, and diffusion scattering spectrometric detection were elaborated. Detection limits for Cd, Cu(II), Fe(III), Pb, and Zn were 3 μg/L, 6 μg/L, 5 μg/L, 40 μg/L, and 1 μg/L, respectively. The procedures were used for the analysis of various real samples, e.g., natural and waste waters, and food.     

Preconcentration of noble metals with the POLYORGS 4 complexing sorbent under the action of microwave irradiation

The sorption of Au(III), Pd(II), Pt(IV), Rh(III), and Ir(IV) with the POLYORGS 4 complexing sorbent in the static mode was studied at room temperature and on thermal and microwave heating. It was demonstrated that the sorption of noble metals from 1 M HCl and 1 M HNO₃ solutions can be substantially accelerated under the action of microwave irradiation. Based on the obtained data, the conditions of the group preconcentration of noble metals for their subsequent determination by the ETAAS and ICP AES methods were selected. The preconcentration procedure was used for the analysis of certified reference material SARM-7B (platinum-containing ore), VT-1 (copper-nickel sulfide ore), and the alloy of copper with noble metals.     

Cellulose fibrous sorbents with conformationally flexible aminocarboxylic groups for preconcentration of metals

New cellulose fibrous sorbents, containing a diethylenetriamine tetraacetate groups, are proposed for the preconcentration of heavy metals. Quantitative extraction of heavy metals from river and sea water is achieved in a wide pH range (3–8) at a high solution flow rate (up to 100–150 volumes of sorbent per minute). Quantitative desorption of metals is achieved with a very small volume of the acid.     

Selective complexing agents for the trace enrichment of platinum metals

Summary N,N-Dialkyl-N-benzoylthioureas act as selective complexing agents for the enrichment of platinum metals even from strongly interfering matrices. In combination with chromatographic separation techniques of GFAAS as detection method metal determinations in the g- and ng/kg range are possible. A review of the investigations so far been carried out is given.     

Specificity of noble metals dynamic sorption preconcentration on reversed-phase sorbents

The reversible sorption preconcentration of noble metals (NMs) using different schemes “sorbent–reagent–eluent” was investigated. The extraction of Au, Pd, Pt, Ir, Rh and Ru chlorocomplexes from hydrochloric acid solutions on hyper-crosslinked polysterene MN-200 in the form of ion associates with tributylamine (TBA) and 4-(n-octyl)diethylenetriamine (ODETA) was investigated. It was found that Pd, Pt and Au were quantitatively and reversibly extracted using TBA on hyper-crosslinked polysterene; the appropriate eluent for desorption was 1 M solution of HCl in ethanol. Ir, Rh and Ru under these conditions were not sorbed quantitatively. It was found that sorbent hydrophobicity is not the main characteristic that defines the efficiency of sorption of a particular NM ion associate. Different efficiencies of hyper-crosslinked polysterene MN-200 for sorption of square-planar chlorcomplexes of Pt, Pd and Au and octahedral complexes of Ir, Rh and Ru were found. For the first time, the sorbents with their own N-atoms – StrataX and StrataX-AW – were used for the sorption of Ir, Rh and Ru. Using these sorbents, the sorption of Ir was increased up to 95%, and the sorption of Ru and Rh was increased to about 40%. We can explain these results by nonspecific interaction of chlorcomplexes of Ir, Rh and Ru with ethylenediamine groups of the sorbent. Weak bases with large anions may be applied for desorption of Ir, Rh and Ru. Two schemes of dynamic sorption preconcentration of NMs from hydrochloric acid solutions were proposed – hyper-crosslinked polysterene MN-200 for the determination of Au, Pd, Pt, and StrataX-AW for Ir, Rh and Ru.     

Comparison of preconcentration procedures for trace metals in natural waters

The relative merits of eight procedures for preconcentrations of trace metal ions from natural water samples and synthetic solutions are evaluated. Spikes (100 μg l^?1 ) of Mn, Co, Zn, Eu, Cs and Ba and the corresponding radioactive tracers were added to batches of drinking water, estuarine water, sea water, ground water, twice-distilled water and ahumic material solution. After equilibration for 2–5 months, the following techniques were applied: passage through columns of Dowex Al chelating resin and ofsilylated silica gel, filtration through laminate membrane filters and chelating diethylenetriamine cellulose filters, precipitation with sodium diethyldithiocarbamate and l-(2-pyridylazo)-2-naphthol, extraction with ammonium pyrrolidinedithiocarbamate, and chelation by 8-quinolinol (oxine) followed by adsorption on activated carbon. The quantitative characteristics of these techniques and the influence of the water matrix effects are discussed, as well as the applicability for x-ray fluorescence analysis.     

Determination of noble metals after separation and preconcentration with silica-bonded complexing ligands

Noble metals are preconcentrated and separated from the matrix elements by adsorption on proper complexing ligands immobilized on silica gel and subsequent elution. Preconcentration factors of 5–10 were achieved. The reliability of the method was proved by analysis of a spiked soil material and a CRM with ICP-AES and ICP-MS. Ag, Au, Pd and Pt showed a good recovery in the spiked material. The indicative value for gold in the CRM (145 BCR) could be confirmed.     

Electrolytical microcell for on-line preconcentration of trace metals in flow systems

Summary The separation of trace metals from solutions of electrolytes by electrodeposition in a 30 l electrolytical flow-through cell was studied. The working electrode of the flow cell was made from powdered spectral or glassy carbon. The electrodeposition is complete for Cu²⁺, Cd²⁺, Mn²⁺ and Pb²⁺, partial for Zn²⁺, Fe³⁺ and Ni²⁺. Mn²⁺ and Pb²⁺ can also be deposited by anodic oxidation on the working electrode. The deposition is complete up to sample flow rates of 3–4 ml/min. The deposited elements are dissolved by short-circuiting the electrodes and flushing the cell with diluted acid. The dissolved elements are determined on-line by flame AAS. Data evaluation through peak area measurement is discussed.     

Modified anthracites as selective sorbents for platinum metals

Methods of preliminary modification were used to obtain activated carbons with low ash content (0.2%), developed π-conjugated electronic system, large surface area, and wide pore size distribution, from exclusively microporous carbons to those of mesoporous type. The adsorption of compounds of platinum-group metals on activated anthracite from single-component (as regards the platinum metal: Pd, Pt, or Rh) and multicomponent (Pd, Pt) solutions containing compounds of concomitant metals was studied.     

Chelating polymers and related supports for separation and preconcentration of trace metals

This review is concerned mainly with the applications of chelating polymeric resins for the separation and concentration of trace metals from oceans, rivers, streams and other natural systems. Commercially available resins, specially prepared polymers and a selection of other sorbents are described and their uses outlined. Special emphasis is placed on the preconcentration of uranium from sea-water.     

Chemically modified polymeric sorbents for sample preconcentration

Solid-phase extraction is an attractive alternative in sample preparation because it overcomes many drawbacks of liquid-liquid extraction and makes on-line determination possible by hyphenation with chromatographic techniques. Driven by the need for more effective and more selective sorbents, advances in solid-phase extraction include the development of new materials. This paper describes different types of chemically modified sorbents for the solid-phase extraction of compounds from aqueous samples. Chemical introduction of different functional groups into a polymeric resin improves the efficiency of solid-phase extraction by providing better surface contact with the aqueous samples; also, these sorbents have a greater capacity than the typical solid-phase materials for polar compounds have. The most important new sorbents are the chemically modified resins based on styrene-divinylbenzene copolymers. Preparation of these new sorbents is described, and advantages and drawbacks of off-line procedures and on-line procedures are also discussed. Applications for off-line and on-line chromatographic determinations of polar compounds are presented.     

On-line preconcentration and GFAAS determination of trace metals in waters

An on-line separation preconcentration system coupled to electrothermal (graphite furnace) atomic absorption spectrometry was developed. A miniature column packed with iminodiacetic acid ethyl cellulose (IDAEC) was inserted into the loop. A peristaltic pump was used to deliver solutions. A flow of air was driven into the packed column, evacuating it between sample loading, washing and elution. The retained analyte was introduced on-line to graphite furnace using countercurrent elution with HNO₃. The system was applied for the determination of V, Co and Pb in medicinal mineral water samples, and nickel in sea water samples. The detection limits (3σ) were 0.058, 0.022, 0.067, 0.062 μg/l for Co, Pb, V, and Ni, respectively. The R.S.D. (n=5) was <5% at 0.4–1.0 μg/l concentration range.     

Application of NaClO-treated multiwalled carbon nanotubes as solid phase extraction sorbents for preconcentration of trace 2,4-dichlorophenoxyacetic acid in aqueous samples

Multiwalled carbon nanotubes functionalized by oxidation of original multiwalled carbon nanotubes with NaClO were prepared and their application as solid phase extraction sorbent for 2,4-dichlorophenoxyacetic acid (2,4-D) was investigated systemically, and a new method was developed for the determination of trace 2,4-D in water samples based on extraction and preconcentration of 2,4-D with solid phase extraction columns packed with NaClO-treated multiwalled carbon nanotubes prior to its determination by HPLC. The optimum experimental parameters for preconcentration of 2,4-D, including the column activating conditions, the amount of the sorbent, pH of the sample, elution composition, and elution volume, were investigated. The results indicated 2,4-D could be quantitatively retained by 100 mg NaClO-treated multiwalled carbon nanotubes at pH 5, and then eluted completely with 10 mL 3:1 (v/v) methanol-ammonium acetate solution (0.3 mol/L). The detection limit of this method for 2,4-D was 0.15 μg/L, and the relative standard deviation was 2.3% for fortified tap water samples and 2.5% for fortified riverine water sample at the 10 μg/L level. The method was validated using fortified tap water and riverine water samples with known amount of 2,4-D at the 0.4, 10, and 30 μg/L levels, respectively.     

Flame-atomic absorption analysis for trace metals after electrochemical preconcentration on a wire filament

To avoid unspecific light losses in the atomic absorption analysis of trace metals in the presence of a high concentration of salts, electrochemical preconcentration on a wire filament is employed, prior to flame atomization. The elements in question are electrolyzed on to a platinum spiral filament which is then heated in an air-acetylene flame. A quartz tube is placed above the filament, to increase the sensitivity of the method. The separation technique is simple and non-destructive; a sample volume of 5–20 ml and an electrolysis time of 2–5 min are recommended. Because of the relatively low filament temperature, the method is limited to elements which are readily volatilized such as silver, bismuth, cadmium, mercury, lead, selenium, tellurium, thallium and zinc. For most elements, the detection limits are of the same order of magnitude as those of the “Delves cup” technique.     

Admicelle-mediated collection followed by flotation for the preconcentration of trace metals in fresh waters

Dithizone-impregnated admicelles were prepared by mixing silica particles with dithizone and cetyltrimethylammonium chloride in 0.1 mol L⁻¹ aqueous ammonia. The resulting admicelles were added to 1000 mL of sample solution and dispersed by stirring for 15 min. Traces of Ni(II), Cu(II), Ga(III), Cd(II), Pb(II) and Bi(III) in the solution were simultaneously incorporated into the admicelles at pH 7.5-9. With the aid of a rising stream of numerous tiny bubbles, the admicelles were floated on the solution surface and collected in a small sampling vessel by suction. The metals were desorbed from the admicelles with dilute nitric acid and determined by inductively coupled plasma-mass spectrometry. The proposed method offered a 100-fold multielement preconcentration and it was applicable to the analysis of river and pond waters.     

Methane preconcentration in a microtrap using multiwalled carbon nanotubes as sorbents

The GC monitoring of green house gases is a challenging task because the concentration of organic species such as methane are relatively low (ppm to ppb) and their analysis requires some level of preconcentration. Since methane is highly volatile, it is not easily retained on conventional sorbents. In this paper we present multiwalled carbon nanotubes (MWNTs) as an effective sorbent for a microtrap designed for methane preconcentration. Its performance was compared to other commercially available carbon based sorbents, and it was found to be the most effective sorbent in terms of breakthrough volume and enthalpy of adsorption.     

Collection of trace heavy metals complexed with ammonium pyrrolidinedithiocarbamate on surfactant-coated alumina sorbents

Surfactant aggregates were formed on alumina surfaces by mixing 100 mg of sodium dodecyl sulfate (SDS) and 1.5 g of gamma-alumina in 50 ml of water. The SDS-coated alumina incorporated water-insoluble metal-ammonium pyrrolidinedithiocarbamate complexes over the pH range 2-8 with a recovery of > 97%. The metals were quantitatively desorbed from the alumina with 4 mol 1(-1) nitric acid, leaving > 99% of SDS on the solid phase. They were determined by inductively coupled plasma mass spectrometry or graphite furnace atomic absorption spectrometry. The proposed method was successfully applied to the determination of traces of iron, cobalt, nickel, copper, cadmium and lead in high-purity alumina.