Investigations on mixed micelles of binary mixtures of zwitterionic surfactants and triblock polymers: a cyclic voltammetric study

Cyclic voltammetry has been employed to investigate the mixed micellar behavior of the binary mixtures of different zwitterionic surfactants such as 3-(N,N-dimethylhexadecylammonio)propane sulfonate (HPS), 3-(N,N-dimethyltetradecylammonio)propane sulfonate (TPS) and 3-(N,N-dimethyldodecylammonio)propane sulfonate (DPS) with three triblock polymers (L64, F127 and P65) by using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Critical micellar concentration (cmc) has been determined from the plots of variation in peak current (i_p) versus the total concentration of surfactant/triblock polymer. Diffusion coefficient of the electroactive species has also been reported. The regular solution theory approximation has been used to determine various micellar parameters of ideal systems. The variation in micellar mole fraction (X₁) of the zwitterionic surfactant supports the formation of mixed micelles, which are rich in triblock polymer component in the surfactant rich region of the mixture and vice versa. The regular solution interaction parameter (β) suggests the formation of mixed micelles due to the synergistic interactions in case of HPS/TPS/DPS + F127/P65 systems and gets affected by EO/PO ratio of triblock polymers.     

Cyclic voltammetry and viscosity measurements of aggregated assemblies of anionic surfactants with nonionic surfactants and triblock copolymers

Cyclic voltammetry (CV) and viscosity measurements have been employed to study the aggregation behavior of mixed micellar systems of anionic surfactant (dioctyl sulfosuccinate sodium salt, AOT) with conventional nonionic surfactants such as Brij 35/TritonX-100/Tween 20/Tween 80/Myrj 45 and two triblock copolymers (L64 and F68). Critical micelle concentration (cmc) values have been determined for various micellar systems from CV measurements using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Diffusion coefficient (D) has been evaluated from Randles–Sevcik equation which showed an overall decrease for most of the binary systems. The negative values of interaction parameters (β) obtained from regular solution theory suggest the synergistic behavior in all the binary systems except AOT + Tween 80 mixtures. The mixed systems of AOT with triblock copolymers showed stronger synergistic interactions than that of mixed systems of AOT with nonionic surfactants. A comparative evaluation of mixed systems of anionic surfactants AOT and sodium dodecyl sulfate with Myrj 45 and AOT + L64 and F68 has been made on the basis of different micellar parameters and structural properties of surfactants. Viscosity measurements also show similar type of interactions in the mixed micelles.     

Structural Behavior of Aggregate Assemblies of Cationic Surfactants and Their Mixtures with Triblock Polymers

Small angle neutron scattering (SANS) technique has been employed to study the structural aspects of micellar system of cationic surfactants viz. alkyltriphenylphosphonium bromide (C₁₂-, C₁₄-, C₁₆TPB) and hexadecylpyridinium chloride (C₁₆PyCl) with triblock polymers (L64, F68, and F127). SANS data analysis reveals the prolate ellipsoidal shape of mixed micelles and increase in the micellar size upon addition of triblock polymers (L64, F68, and F127). The influence of effective size of the head group segment on the growth of micelles of HTPB (larger head group) has also been compared with that of HPyCl (smaller head group). A proportionate micellar growth of cationic surfactants has been found with increase in the length of tail segment of cationic surfactants. The observed mixed micellar growth in mixed systems is also accounted on the basis of simultaneous increase in the hydrophobicity of both the components in the mixed system. Results from the present study enlightened the effect of variation in head group segment and hydrophobicity on the structural aspects of mixed micellar system.     

Mixed micelles of binary triblock polymer mixtures in pure water at 30 °C

This is the first report on the mixed micelles of binary triblock polymer (TBP) mixtures. The steady-state fluorescence and viscosity measurements have been carried out for the various binary combinations of TBP (i.e., P103 + F127/P84/L64/P104/P123) in pure water at 30 °C. All the TBP components selected for the study show clear micelle formation process. The pyrene fluorescence has been used to determine the critical micelle concentration. As micelle-forming TBP can also be termed as nonionic surfactants; therefore, their mixed micelle formation has been evaluated by applying the regular solution theory. It has been observed that this theory very well predicts the nature of mixed micelles. The P103 + F127/P84/L64 binary mixtures undergo mixed micelle formation due to the synergistic interactions while P103 + P104/P123 show antagonistic behavior. The results clearly show that the mixtures with greater number of poly(ethylene oxide) units undergo favorable mixing.     

The Effects of Salts and Ionic Surfactants on the Micellar Structure of Tri‐Block Copolymer PEO‐PPO‐PEO in Aqueous Solution

The micelles of two poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymers, P123 and F127 (same mol wt of PPO but different % PEO) in aqueous solution in the absence and presence of salts as well as ionic surfactants were mainly examined by dynamic light scattering (DLS). The study is further supported by cloud point and viscosity measurements. The change in cloud point (CP), as well as the size of micelles in aqueous solution in presence of salts obeys the Hofmeister lyotropic series. Addition of both cationic cetylpyridinium chloride (CPC) and anionic sodium dodecylsulfate (SDS) surfactants in the aqueous solution of P123 show initial decrease of micellar size from 20 nm to nearly 7 nm and then increasing with a double relaxation mode, further in the presence of NaCl this double relaxation mode vanishes. The effect of surfactant on F127, which has much bigger hydrophilic part is different than P123 and have no double relaxation. The relaxation time distributions is obtained using the Laplace inversion routine REPES. Two relaxation modes for P123 are explained on the bases of Pluronic rich mixed micelles containing ionic surfactants and the other smaller, predominantly surfactant rich micelles domains.     

Room temperature sphere-to-rod growth and gelation of PEO-PPO-PEO triblock copolymers in aqueous salt solutions

The effects of NaCl and KF on the sphere-to-rod micellar growth behavior of triblock copolymers having two different compositions, (EO)20(PO)70(EO)20 (P123) and (EO)26(PO)40(EO)26 (P85), have been studied by dynamic light scattering (DLS), small angle neutron scattering (SANS) and dilute solution viscometry. NaCl can effectively tune the sphere-to-rod growth temperature of the micelles of both these copolymers and induce micellar growth down to the room temperature and below. The growth behavior is found to be dependent on the composition of the copolymer as P123 being more hydrophobic shows the room temperature growth in the presence of ethanol at significantly lesser NaCl concentration than the less hydrophobic copolymer P85. DLS studies depict for the first time the growth driven transition of the copolymer solutions from dilute to semi-dilute regime as a function of copolymer and salt concentrations. KF can also induce room temperature growth of the P123 micelles at lesser salt concentration than NaCl but it fails to induce any such growth of the P85 micelles. A pseudo-binary temperature-concentration phase diagram on 15% copolymer solutions shows the variation of the sphere-to-rod transition temperature and the cloud point of the copolymer solutions as a function of salt concentration.     

Effect of SDS on the self-assembly behavior of the PEO-PPO-PEO triblock copolymer (EO)20(PO)70(EO)20

The mixed micellar system comprising the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-based triblock copolymer (EO)(20)(PO)(70)(EO)(20) (P123) and the anionic surfactant sodium dodecyl sulfate (SDS) has been investigated in aqueous media by small-angle neutron scattering (SANS) and viscosity measurements. The aggregation number of the copolymer in the micelles decreases upon addition of SDS, but a simultaneous enhancement in the degree of micellar hydration leads to a significant increase in the micellar volume fraction at a fixed copolymer concentration. This enhancement in the micellar hydration leads to a marked increase in the stability of the micellar gel phase until it is destroyed at very high SDS concentration. Mixed micellar systems with low and intermediate SDS concentrations form the micellar gel phase in much wider temperature and copolymer concentration ranges than the pure copolymer micellar solution. A comparison of the observed results with those for the copolymers (EO)(26)(PO)(40)(EO)(26) (P85) and (EO)(99)(PO)(70)(EO)(99) (F127) suggests that the composition of the copolymers plays a significant role in determining the influence of SDS on the gelation characteristics of the aqueous copolymer solutions. Copolymers with high PO/EO ratios show an enhancement in the stability of the gel phase, whereas copolymers with low PO/EO ratios show a deterioration of the same in the presence of SDS.     

Micelles from PEO-PPO-PEO block copolymers as nanocontainers for solubilization of a poorly water soluble drug hydrochlorothiazide

The effect of molecular characteristics of EO-PO triblock copolymers viz. Pluronic(?) P103 (EO(17)PO(60)PEO(17)), P123 (EO(19)PO(69)EO(19)), and F127 (EO(100)PO(65)EO(100)) on micellar behavior and solubilization of a diuretic drug, hydrochlorothiazide (HCT) was investigated. The critical micellization temperatures (CMTs) and size for empty as well as drug loaded micelles are reported. The CMTs and micelle size depended on the hydrophobicity and molecular weight of the copolymer; a decrease in CMT and increase in size was observed on solubilization. The solubilization of the drug hydrochlorothiazide (HCT) in the block copolymer nanoaggregates at different temperatures (28, 37, 45°C), pH (3.7, 5.0, 6.7) and in the presence of added salt (NaCl) was monitored by using UV-vis spectroscopy and solubility data were used to calculate the solubilization characteristics; micelle-water partition coefficient (P) and thermodynamic parameters of solubilization viz. Gibbs free energy (ΔG(s)°), enthalpy (ΔH(s)°) and entropy (ΔS(s)°). The solubility of the drug in copolymer increases with the trend: P103>P123>F127. The solubilized drug decreased the cloud point (CP) of copolymers. Results show that the drug solubility increases in the presence of salt but significantly enhances with the increase in the temperature and at a lower pH in which drug remains in the non-ionized form.     

Effects of block size of pluronic polymers on the water structure in the corona region and its effect on the electron transfer reactions

Effects of constituent block size of triblock copolymers on the nature of the water molecules in the corona region of their micelles have been investigated using time-resolved fluorescence measurements. The physical nature of the water molecules in the micellar corona region of the block copolymer, Pluronic F88 ([ethylene oxide (EO)]103-[propylene oxide (PO)]39-EO103), has been studied using a solubilized coumarin dye. Solvent reorientation time and rotational correlation time have been measured and compared with another block copolymer, Pluronic P123 (EO20-PO70-EO20), which has a different composition of the constituent PO and EO blocks. It is noted that due to the presence of larger number of EO blocks in F88 as compared with P123, the corona region of the former micelle is more hydrated than that of the latter. The solvent reorientation time and rotational correlation time are found to be relatively shorter for F88 as compared with P123. This indicates that the water molecules in the corona of the F88 micelle are more labile than those of P123, which is also supported from the estimated number of water molecules associated with each EO unit, measured from the size of each type of micelle and its aggregation number. To understand the effect of block size on the chemical reactions in these microheterogeneous media, electron transfer reactions have been carried out between different coumarin acceptors and N, N-dimethylaniline donor. The electron transfer results obtained in F88 micelles have been compared with those obtained in P123, and the results are rationalized on the basis of the relative hydration of the two triblock copolymer micelles.     

Mixed micelle behavior of Pluronic L64 and Triton X-100 with conventional and dimeric cationic surfactants

The mixed micellar properties of a triblock copolymer, Pluronic L64, (EO)13(PO)30(EO)13, and a nonionic surfactant, Triton X-100, in aqueous solution with conventional alkyl ammonium bromides and their dimeric homologues were investigated with the help of fluorescence and cloud point measurements. The composition of mixed micelles and the interaction parameter, beta, evaluated from the critical micelle concentration (cmc) data for different mixtures using Rubingh's and Motomura's theories are discussed. It has been observed that the mixed micelle formation between monomeric/dimeric alkyl ammonium bromides and L64 was due to synergistic interactions which increase with the increase in hydrophobicity of the cationic component. On the other hand, synergistic mixing was observed in the mixed micelles of Triton X-100 and monomeric cationic surfactants, the magnitude of which decreases slightly with the increase in hydrophobicity of the cationic component. Antagonistic interactions were observed in the case of Triton X-100 and dimeric cationic surfactants.     

Effects of Inorganic Salts on Micellization and Solubilization in an Aqueous Solution of Poly(ethylene oxide)/Poly(propylene oxide)/Poly(ethylene oxide) Triblock Copolymer

The effects of inorganic salts on micellization and solubilization of prednisolone in aqueous solution of poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer (Pluronic P85) were studied. The effect of inorganic salts on decrease in the cloud point and the critical micelle concentration (cmc) of Pluronic P85 was the order of Na₂HPO₄ > NaH₂PO₄ > NaCl > NaBr. Moreover, it was found that Pluronic P85 forms two kinds of micelles: monomolecular micelles and polymolecular micelles. The polymolecular micelle increased with increasing amount of added inorganic salts. Moreover, solubilization behavior is explained from the standpoint of salting out for prednisolone and association characteristics of Pluronic P85.     

Salt‐Induced Micellization of Pluronic F88 in Water

The effect of potassium chloride on the micellization of a poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) triblock copolymer (Pluronic F88: EO₁₀₃PO₃₉EO₁₀₃.) in water was studied by fluorescence, FTIR, ¹H NMR, dynamic light scattering, and dye solubilization. The critical micellization temperature (CMT) values of the copolymer decreased with an increase of KCl concentration while micellar core gets progressively dehydrated. The results reveal the leading role of salt‐water interaction in promoting the micellization of PEO‐PPO‐PEO copolymer by the addition of salt. No significant micellar growth was seen even at temperatures close to cloud point.     

Flurbiprofen encapsulation using pluronic triblock copolymers

Pulsed-field gradient stimulated-echo nuclear magnetic resonance (NMR) and surface tension measurements have been used to study the effect of drug addition on the micellization behavior of pluronic triblock copolymers (P103, P123, and L43). The addition of 0.6 wt% flurbiprofen to Pluronic P123 and P103 solutions reduced their cmc and promoted micellization. Also, a substantial increase in the hydrodynamic radius of Pluronic P103 from 5 to 10 nm was observed, along with an increased fraction of polymer micellized, demonstrating that the polymers solubilize this nonsteroidal anti-inflammatory drug.     

Improved micellar hydration and gelation characteristics of PEO-PPO-PEO triblock copolymer solutions in the presence of LiCl

LiCl-induced changes in the micellar hydration and gelation characteristics of aqueous solutions of the two triblock copolymers F127 (EO(100)PO(70)EO(100)) and P123 (EO(20)PO(70)EO(20)) (where EO represents the ethylene oxide block and PO represents the propylene oxide block) have been studied by small-angle neutron scattering (SANS) and viscometry. The effect of LiCl was found to be significantly different from those observed for other alkali metal chloride salts such as NaCl and KCl. This can be explained on the basis of the complexation of hydrated Li(+) ions with the PEO chains in the micellar corona region. The interaction between the chains and the ions is more significant in the case F127 because of its larger PEO block size, and therefore, micelles of this copolymer show an enhanced degree of hydration in the presence of LiCl. The presence of the hydrated Li(+) ions in the micellar corona increases the amount of mechanically trapped water there and compensates more than the water molecules lost through the dehydration of the PEO chains in the presence of the Cl(-) ions. The enhancement in micellar hydration leads to a decrease in the minimum concentration required for the F127 solution to form a room-temperature cubic gel phase from 18% to 14%. Moreover, for both copolymers, the temperature range of stability of the cubic gel phase also increases with increasing LiCl concentration, presumably because of the ability of the Li(+) ions to reduce micellar dehydration with increasing temperature. Viscosity studies on a poly(ethylene glycol) (PEG) homopolymer with a size equivalent to that of the PEO block in F127 (4000 g/mol) also suggest that the dehydrating effect of the Cl(-) ion on the PEG chain is compensated by its interaction with the hydrated Li(+) ions.     

苯在Pluronic F127和P123胶束水溶液中的增溶动力学

发展了不分离胶束的增溶动力学数据分析模型,以此考察苯在F127和P123胶束水溶液中的增溶动力学行为.实验发现,这二种胶束增溶苯的速度较快,温度升高进一步促进了增溶.     

Phase Separation of Triblock Polymers and Tritons in the Presence of Biomolecules

Surfactant?Cbiomolecule interactions have been investigated by studying the additive effect of various kinds of biomolecules such as amino acids, dipeptides, amino alcohols, sugars, hydroxy acids and dicarboxylic acids on the cloud point behavior of nonionic surfactants including triblock polymers (L64, P84) and tritons (TX100, TX114). In most cases, addition of biomolecules has been found to cause a depression in the cloud point of the triblock polymers and tritons. The presence of biomolecules in the solution of a nonionic surfactant causes drastic changes to the clouding behavior of the surfactant, especially at high biomolecule concentrations. The results reveal that both hydrophobicity and structural aspects play important roles in the observed cloud point variation of the nonionic surfactants.     

Spectroelectrochemical and spectrophotochemical properties of N-tetradecyl-N '-ethyl-viologen: Micellar effects

The results of Spectroelectrochemical studies in homogenous solutions have shown that below the cmc value the cation radical of N-tetradecyl-N '-ethyl viologen (TDEV) dimerizes. The TDEV and tetradecyltriethyl-ammonium bromide (TDEA) micelles were found to stabilize the cation radical TDEV^.+ and increase the rate constant for the reaction TDEV+TDEV²⁺ = TDEV^.+ as compared with the results obtained at concentrations below cmc.Based on the spectrophotochemical measurements for TDEV it was found that the quantum yield (Φ) of photoreduction in micellar evironment of TDEA was twice as large as Φ for reactions performed in homogenous solution. Moreover, in micellar solutions photoreduction of TDEV leads to a cation radical of reduced TDEV (TDEV⁺), but in homogenous solution to the dimer of TDEV [TDEV]₂. Therefore, the process of dimerization of TDEV^.+ cation radical is inhibited by micellar catalysis.     

Antagonistic mixing behavior of cationic gemini surfactants and triblock polymers in mixed micelles

Conductance (kappa), pyrene fluorescence (I1/I3), cloud point (C(P)), and Krafft temperature (K(T)) measurements have been carried out for various dimethylene bis(alkyldimethylammonium bromide) (gemini) surfactants with different poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock polymers (TBP). From the kappa and I1/I3 studies, the critical micelle concentrations of mixed micelle formation between the gemini and TBP have been determined using regular solution theory. It has been observed that mixed micelle formation in all the binary mixtures of gemini+TBP occurs due to the unfavorable mixing, the magnitude of which decreases with increased hydrophobicity of the gemini component. The results are further supported by evaluating the mean micelle aggregation number and enthalpy of fusion from fluorescence and Krafft temperature measurements, respectively.     

Microenvironment in the corona region of triblock copolymer micelles: temperature dependent solvation and rotational relaxation dynamics of coumarin dyes

Dynamic Stokes' shift and fluorescence anisotropy measurements using coumarin-153 (C153) and coumarin-151 (C151) as the fluorescence probes have been carried out in aqueous poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123) and poly(ethylene oxide)100-poly(propylene oxide)70-poly(ethylene oxide)100 (F127) block copolymer micelles with an aim to understand the water structures and dynamics in the micellar corona region. It has been established that the probes reside in the micellar corona region. It is indicated that the corona regions of P123 and F127 micelles are relatively less hydrated than the Palisade layers of neutral micelles like Triton-X-100 and Brij-35. From the appraisal of total Stokes' shift values for the probes in the two block copolymer micelles, it is inferred that the F127 micelle is more hydrated than the P123 micelle. It is observed that the dynamic Stokes' shift values for both of the probes remain more or less similar at all the temperatures studied in the P123 micelle. For C153 in F127, however, the observed Stokes' shift is seen to decrease quite sharply with temperature, though it remains quite similar for C151. Moreover, the fraction of the unobserved initial dynamic Stokes' shift is appreciably higher for both the probes in the F127 micelle compared to that in P123. Over the studied temperature range of 293-313 K, the spectral shift correlation function is described adequately by a bi-exponential function. Rotational relaxation times for C153 in both the micelles show a kind of transition at around 303 K. These results have been rationalized assuming collapse of the poly(ethylene oxide) (PEO) blocks and formation of water clusters in the corona region due to dehydration of poly(ethylene oxide) blocks with an increase in temperature. A dissimilar probe location has been inferred for the differences in the results with C153 and C151 probes in F127. Comparison of the microviscosity and the hydration of the block copolymer micelles has also been made with those of the other commonly used neutral micelles, for a better understanding of the results in the block copolymer micelles.     

New Approach to Determine the Phase Transition Temperature,Cloud Point,of Thermoresponsive Polymers

In this study, a novel method to determine the cloud point temperature variation in aqueous solutions of thermoresponsive homo- and copolymers was developed. Poly(N-vinylcaprolactam) (PVCL) and triblock copolymers of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-vinylcaprolactam)-b-(t-butyl acrylate-co-acrylic acid) (P[(tBA-co-AA)-b-PVCL-b-P(tBA-co-AA)] were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and used as models. The incorporation of AA units (hydrophilic segments) into the polymeric chain of PVCL influenced the phase transition, increasing the cloud point temperature of the final copolymer. The cloud point temperatures of the PVCL and the triblock copolymer P(tBA-co-AA)-b-PVCL-b-P(tBA-co-AA) were determined by measuring the transmittance of aqueous solutions of the polymers in a Turbiscan Lab instrument in the range of 29 to 40 C. This is the first study in which Turbiscan Lab is used to determine the cloud point temperature.