Biodegradable materials by reactive extrusion: from catalyzed polymerization to functionalization and blend compatibilization

This contribution aims at reviewing how reactive extrusion (REx) technique can participate in the design and development of biodegradable polymeric materials more particularly based on aliphatic polyesters issued from both renewable (agrochemical) and fossil (petrochemical) resources. On one side, REx will be approached for producing in a continuous way biodegradable aliphatic polyesters by ring-opening polymerization of lactones. Tin and aluminum-based catalysts will be considered for quantitatively converting the cyclic monomer in high molecular weight polyester chains within residence time of a few minutes only. On the other hand, such polyesters will undergo various chemical modifications again performed by REx. Self-branching reactions will be investigated in order to compensate the characteristic molecular weight reduction of the polyester chains as triggered by hydrolysis and/or transesterification side-reactions. Controlled functionalization reactions by maleic anhydride treatment will be studied as well. Finally biodegradable composite materials will be produced by REx and will rely upon the interface compatibilization between the polyester matrix and natural fillers such as starch granules or talc microparticles. To cite this article: J.-M. Raquez, et al., C. R. Chimie 9 (2006).     

Benzo[f]isoindole derivatives from cycloaddition reaction of 2,4-dimethylpyrimido[2,1-a]isoindole and maleimides

In contrast to the previously reported results in the reaction of maleimides with pyrido[2,1-a]isoindole and 1,2-bis substituted isoindoles, the reaction between 2,4-dimethylpyrimido[2,1-a]isoindole and maleimides leads to the formation of unusual products. Their structure is assessed by NMR and mass spectrometry. An original reaction pathway is proposed. The high quantum yields observed in fluorescence opens the route to applications as biological probes. To cite this article: Z.V. Voitenko et al., C. R. Chimie 9 (2006).     

New rheological developments for reactive processing of poly(ε-caprolactone)

This short review aims to show how an integrated activity on reactive processing have been developed these last years in our laboratory. We can say that the originality of this approach is based on combining developments in chemistry, in line instrumentation, and rheology aspects. Our rheological works can be divided into four important contributions: rheo-physics, rheo-chemistry, rheo-mixing and rheo-processing. These different parts are illustrated from the ε-caprolactone polymerisation in bulk and dispersed media. Rheo-physics studies allowed us to calculate the molecular weight distribution and chain structures of in situ polymerised poly(ε-caprolactone) samples. From rheo-chemistry works, we are now able to predict the variation of the complex shear modulus versus the extent of the polymerisation. The developments of new rheological tools such as rheo-mixer enable us to investigate complex mixing situations encountered in reactive polymer blends and formulations. Lastly, a rheo-processing approach based on the in-line measurement of the viscosity in a slit rheometer at the die exit of the extruder allows us to envisage its application to the experimental control of the reactive processing in extruder. To cite this article: P. Cassagnau et al., C. R. Chimie 9 (2006).     

Lavoisier and meat stock

Antoine-Laurent de Lavoisier published his results on ‘meat stock’ preparation in 1783. Measuring density, he stated that ‘food principles’ were better extracted using a large quantity of water. This result was checked. To cite this article: H. This et al., C. R. Chimie 9 (2006).     

Solid-state synthesis of boron subnitride, B6N: myth or reality?

Solid-state synthesis of boron subnitride, B₆N, as a result of chemical interaction between boron and boron nitride at 7.5 GPa and 1700 °C has been previously reported by Hubert et al. However, a critical analysis of the results has shown that the evidence for the formation of boron subnitride with B₆O-like structure is inconclusive. We have studied in situ the interaction between boron and BN at the same p–T conditions using X-ray diffraction with synchrotron radiation. At 7.4 GPa and 1700 °C the formation of a new phase has not been observed. At the same time, HP–HT treatment has resulted in strong and unpredictable preferred orientation of boron crystallites. This leads to the rise of some weak boron reflections that might be erroneously attributed to the appearance of a new phase. To cite this article: V.L. Solozhenko et al., C. R. Chimie 9 (2006).     

Coadsorption of carbofuran and lead at the water/silica interface. Possible impact on environment

Despite its extremely weak adsorption at the water/silica interface, carbofuran can, however, induce the coadsorption of metallic salts, like, for example, lead nitrate, and thus enhance its adsorption. We quantitatively studied this phenomenon with a depletion method and under concentration conditions close to the environmental ones. Heavy metal salt was found to positively adsorb, whereas carbofuran relative adsorption is generally slightly negative. This study provides evidence that considering these facts is of paramount importance in environmental prospects. To cite this article: G. Elmanfe et al., C. R. Chimie 9 (2006).     

Synthesis and reactivity of new heterodinuclear iron/rhenium Cx complexes of the formula (η-C5Me5)Re(NO)(PPh3)(CC)n(η-dppe)Fe(η-C5Me5) (n = 3, 4): Redox properties and a dicobalt hexacarbonyl adduct

We report in this communication the synthesis and characterization of two Fe/Re heterodinuclear complexes 3_n of formula (η⁵-C₅Me₅)Re(NO)(PPh₃)(CC)_n(η²-dppe)Fe(η⁵-C₅Me₅) (n = 3, 4) as well as the hexacarbonyl dicobalt adduct (4) of the hexatriynediyl complex 3₃. We show by cyclic voltammetry that the “electronic communication” between the organometallic endgroups and thereby the thermodynamic stability of the corresponding mixed-valent (MV) parent 3_n⁺ is strongly influenced by bridge extension or by complexation of the [Co₂(CO)₆] fragment. In the case of the hexatriynediyl complex, the MV complex 3₃⁺ or 4 can be isolated by performing the chemical oxidation of 3₃ at low temperature. Spectroscopic studies of this compound and of other stable oxidized redox congeners should now help us to unravel how bridge extension modifies the electronic communication between the different redox-active endgroups in this family of unsymmetrically-substituted polyynediyl compounds.     

Synthesis and properties of copper quinonoid complexes for optical recording application

We describe the synthesis of novel quinonemonimines Cu(II) coordination complexes, of the type:

Full-size image (1K)

which, in addition to their intrinsic interest, have potential application in optical recording. The following key parameters have been highlighted: (i) the presence of coordinating arms on the quinonoid core of the ligand leads to octahedral complexes with increased solubility, (ii) the presence of Cu(II) as a metal centre leads to a favourable exothermic decomposition, (iii) the presence of quinonoid moieties results in the optical absorption to be in the desired wavelength range. To cite this article: P. Braunstein et al., C. R. Chimie 9 (2006).     

Process monitoring of polymers by in-line ATR-IR, NIR and Raman spectroscopy and ultrasonic measurements

The aim of the present work is to show that spectroscopic and ultrasonic methods are powerful in situ methods for monitoring polymerization processes and for the determination of the composition of polymer blends and additives during extrusion. Quantitative analysis carried out with chemometric methods can determine the composition of multicomponent polymer mixtures and predict real world samples in real-time during extrusion. Examples are the modification of hyperbranched poly(urea-urethane)s, the polymerization of MMA, the real-time determination of flame retardants in PA, and the determination of the composition of the blend PE/PS. To cite this article: D. Fischer et al., C. R. Chimie 9 (2006).     

Polymer degradation during processing

This paper deals with the degradation processes occurring during polymer processing. Some general aspects of polymer processing are first recalled. Then, oxidation mechanisms and kinetics are evoked and the main processing methods are compared from this point of view. Temperature–molar mass maps allow to define a processability window and to envisage ways to widen this window. The final chapter is devoted to a case study: the PET processing, which is characterized by an especially complex combination of degradation processes. To cite this article: X. Colin and J. Verdu, C. R. Chimie 9 (2006).     

Particle size distribution in mini-emulsion polymerization

The particle size distribution polydispersities of a number of macro- and mini-emulsion latexes are reported. In cases where the macro-emulsion and mini-emulsions were produced under very nearly identical conditions, the mini-emulsion will have a polydispersity equal to, or only very slightly greater than, the equivalent macro-emulsion. To cite this article: K. Landfester et al., C. R. Chimie 6 (2003).     

Synthesis and structure of the unsymmetrical β-diimine precursor: The β-iminoamine

The reaction of benzoylacetone with ortho-substituted aniline derivatives gives the unsymmetrical β-iminoamine ligands (5–8) with high yields. A convenient synthesis is described. These compounds have been characterized by NMR and IR spectroscopies. The structure of the β-iminoamine 5, 3-N-(2,6-diisopropylphenylamino)-1-phenyl-1N-(2,6-diisopropylphenylimino)but-2-ene, was solved by X-ray diffraction methods.     

Recent progress in nitroxide-mediated polymerizations in miniemulsion

Recent developments in nitroxide-mediated polymerizations conducted in emulsion and miniemulsion have advanced the field across a range of both experimental and theoretical fronts. This article reviews progress in bicomponent initiating systems (including use of camphorsulfonic acid to enhance rate), unimolecular initiating systems, miniemulsions not requiring the use of volatile costabilizers, polymerization of acrylates, mathematical modeling and simulation, and theoretical understanding with regards to issues such as compartmentalization, preservation of polymer chain livingness, the role of aqueous phase kinetics and phase partitioning. These topics are discussed and analyzed to present an integrated portrait of the current status of nitroxide-mediated polymerizations in emulsion/miniemulsion and to identify the most pressing concerns, issues, and opportunities. To cite this article: M.F. Cunningham, C. R. Chimie 6 (2003).     

Dinuclear vanadium and tetranuclear iron complexes obtained with the open Wells–Dawson [Si2W18O66] tungstosilicate

Reaction of two transition metal cations M (M = V^V, Fe^III) on the open Wells–Dawson anion α-[{K(H₂O)₂}Si₂W₁₈O₆₆]^15– leads to dinuclear and tetranuclear complexes, respectively. The molecular anions [{KV₂O₃(H₂O)₂}(Si₂W₁₈O₆₆)]^11– and [{Fe₄(OH)₆}(Si₂W₁₈O₆₆)]^10– have been structurally characterized by single crystal X-ray diffraction. The oxo/hydroxometallic clusters [KV₂O₃(H₂O)₂]⁵⁺ and [Fe₄(OH)₆]⁶⁺ are included in the pocket between the two subunits of [Si₂W₁₈O₆₆]^16–. The Fe^III atoms of the iron complex can be reduced to Fe^II by a single four-electron step. To cite this article: N. Leclerc-Laronze et al., C. R. Chimie 9 (2006).     

Enantiopure aryl-[1,2,5,6-tetrahydro-pyridinyl] methanols and their use for heterogeneous hydrogenation of ethyl pyruvate

Both enantiomers of two new chiral modifiers (naphthyl- and anthryl-[1,2,5,6-tetrahydro-pyridinyl] methanols, 4H and 5H) are obtained for the first time from inexpensive d-mannitol in 10 easy steps. Until now erythro-4H is the only synthetic chiral modifier available under both enantiomeric forms, which provide enantioselectivities almost as high as those obtained with natural cinchonidine, for which only one enantiomer is available. It is shown that the anthryl group may be less efficient than the naphthyl (the e.e.% drops from 75% with erythro-4H to 46% with erythro-5H) and that N-methyl substitution (trisubstituted nitrogen as in cinchonidine) leads also to a drop in the e.e.% (from 75% with 4H to 39% with 4Me).     

Reversible adsorption of spherical particles from binary mixtures: long-time behaviour

Formation of monolayers of spherical particles in processes with reversible adsorption from mixtures of large and small particles was simulated in computer experiments. Computer program was based on an algorithm that took into account random sequential adsorption, desorption and lateral diffusion of adsorbed particles (RSA–DLD model). Computer experiments were performed for systems with rate constants of particle adsorption at least 10³ times higher than rate constants of desorption. In processes with very fast adsorption and slow desorption, formation of monolayer can be divided into two stages. During the first stage, the total surface coverage (the coverage with particles of both types) increases very fast and becomes very close to that at equilibrium. During the second stage, the total coverage changes very slowly and the system approaches equilibrium mainly by the replacement of large particles with the small ones. A simple kinetic model for evolution of the monolayer composition during the second stage has been proposed. Kinetic equations related to this model allow the determination of large particles’ desorption rate constants on the basis of changes in the surface concentrations of adsorbed large and small microspheres. The validity of the model has been tested comparing large particles’ desorption rate constants values that had been used for simulations with values of the corresponding rate constants determined using analytical equations, with a view to analysing the simulation results. To cite this article: S. Slomkowski et al., C. R. Chimie 6 (2003).     

Technetium transmutation and production of artificial stable ruthenium

The recent Russian results on technetium transmutation into ruthenium are summarized, including the first isolation of artificial stable ruthenium from irradiated technetium targets. To cite this article: V. Peretroukhine et al., C. R. Chimie 7 (2004).

Résumé

Transmutation du technétium et production du ruthénium artificiel. Les résultats obtenus en Russie sur la transmutation du technétium en ruthénium artificiel et son isolement des cibles irradiées sont présentés. Pour citer cet article : V. Peretroukhine et al., C. R. Chimie 7 (2004).     

Hybrid copolymer latexes cross-linked with methacryloxy propyl trimethoxy silane. Film formation and mechanical properties

We describe in this work the copolymerization reaction of 3-trimethoxysilyl propyl methacrylate (MPS) with styrene (Styr.) and n-butyl acrylate (BuA) monomers through emulsion polymerization. The so-produced hybrid copolymer (P(BuA-co-MPS)) and terpolymer (P(Styr-co-BuA-co-MPS)) latexes were cast into films that displayed a good optical transparency. The copolymers microstructure in the films was characterized by FTIR, ¹³C and ²⁹Si solid state NMR spectroscopies, and was found to be highly dependent on parameters such as the monomer feed composition, the suspension pH and the silane addition profile. The films obtained from the hybrid latexes showed improved dynamic mechanical properties indicating that a reinforcing organo-mineral network had formed in the composite materials. The dynamic modulus of the hybrids increased with increasing silane contents while, concurrently, the tan δ peak shifted to higher temperatures, broadened and decreased in intensity. To cite this article: S. Vitry et al., C. R. Chimie 6 (2003).     

Comparison of H3PW12O40 and H4SiW12O40 heteropolyacids supported on silica by H MAS NMR

The H₃PW₁₂O₄₀ and H₄SiW₁₂O₄₀ heteropolyacids supported on silica were studied by ¹H MAS NMR as a function of both the coverage and the dehydroxylation temperature. The signal at ca. 8 ppm attributed to the highly acidic protons of the anhydrous form of the heteropolyacid was never observed in the case of the phosphotungstic polyanion supported on silica while it was clearly present in the case of the silicotungstic species. These results explain the different activities of the two supported heteropolyacids in acid reactions involving strong acid sites. To cite this article: A. Thomas et al., C. R. Chimie 8 (2005).     

Viscoelastic behaviour of butyl acrylate/styrene/2-hydroxyethyl methacrylate/acrylic acid latices thickened with associative thickeners

The rheological behaviour of butyl acrylate/styrene/acrylic acid latices thickened with a hydrophobically modified ethoxylated polyurethane (HEUR) or hydrophobically modified alkali-soluble polyacrylate emulsion (HASE) was investigated. While the pseudoplastic character of frequency dependence of complex viscosity was similar for both thickeners, viscoelastic behaviour, expressed as the ratio of loss and storage moduli, significantly differed, indicating that the HEUR molecules, unlike swollen HASE particles, create a viscoelastic space structure. The increase in hydrophilicity of the particle surface, achieved by incorporation of 2-hydroxyethyl methacrylate (HEMA) monomer into the latex copolymer reduced the viscoelasticity of latices thickened with HEUR, but not of those thickened with HASE. This confirms that adsorption of hydrophobic end-groups on particle surface is important for thickening of latices with HEUR and that a physical network of latex particles interconnected by the thickener macromolecules is formed. To cite this article: O. Quadrat et al., C. R. Chimie 6 (2003).