新型功能单体溴化甲基丙烯酰氧乙基二甲基羧壬基铵的合成与表征

新型功能单体溴化甲基丙烯酰氧乙基二甲基羧壬基铵的合成与表征;溴化甲基丙烯酰氧乙基二甲基羧壬基铵;两性梳形聚丙烯酰胺;可聚合甜菜碱     

具有内皮细胞选择性的细胞膜仿生支架材料的研究

利用AIBN引发自由基反应,由单体2-(甲基丙烯酰氧基)乙基-2-(三甲基氨基)乙基磷酸酯(MPC)、甲基丙烯酸十八酯(SMA)、对硝基苯氧羰基聚乙二醇甲基丙烯酸酯(MEONP)合成了一种新型类细胞膜仿生涂层材料.MPC可以阻抗非特异性吸附;MEONP可以结合抗体或多肽促进特异性识别.通过表面固定的方法引入多肽序列Arg-Glu-Asp-Val(REDV),使涂层具有内皮细胞选择性.核磁、紫外吸收、红外光谱表征证实聚合物的组成以及REDV多肽在表面的固定;并通过血浆复钙化实验表征涂层的血液相容性.细胞黏附与增殖实验反映REDV多肽构建的涂层表面具备良好的特异性识别并结合内皮细胞的能力.     

磷酰胆碱色谱固定相的制备及其在分离生物大分子中的应用

以三氯氧磷、氯化胆碱和甲基丙烯酸-2-羟乙酯(HEMA)为原料合成了含磷酰胆碱的单体2-甲基丙烯酰氧乙基磷酰胆碱(MPC). 在硅胶表面嫁接聚合MPC, 得到磷酰胆碱两性离子交换色谱填料. 研究了该填料对标准蛋白的分离性能及pH对蛋白质保留的影响. 结果表明, 该填料对溶菌酶和牛血清白蛋白的动态吸附容量分别为13.8和18.7 mg/g, 其基质磷酰胆碱色谱固定相可同时基线分离两种酸性和两种碱性蛋白.     

一种仿细胞膜聚合物用于碳纳米管表面改性

以新型含有磷酸胆碱基的仿细胞膜两亲聚合物——胆固醇封端的聚(2-甲基丙烯酰氧基乙基磷酸胆碱)(CPMPC)为表面稳定剂实现碳纳米管的表面改性,利用两亲聚合物中的胆固醇疏水段与碳纳米管表面进行非共价键的稳定结合,通过两亲聚合物中聚(2-甲基丙烯酰氧基乙基磷酰胆碱)(PMPC)亲水段实现其水溶性和生物相容性.并以商业可获得的典型两亲分子,末端为胆固醇的聚氧乙烯(CPEG)和卵磷脂,为对照进行研究.研究表明CPMPC和CPEG均具有比卵磷脂更高的对碳纳米管进行分散的能力.而CPMPC改性的碳纳米管比CPEG改性的碳纳米管具有更优的稳定性和生物相容性,通过新型仿细胞膜聚合物改性的碳纳米管在生物医用领域有潜在应用.     

6-甲基-3-甲基丙烯酰氧乙基-3,4-2H-1,3-苯并噁嗪及其共聚物的合成

以6-甲基-3-羟乙基-3,4-2H-1,3-苯并噁嗪(MB-OH)和甲基丙烯酰氯为原料, 通过酯化反应合成了6-甲基-3-甲基丙烯酰氧乙基-3,4-2H-1,3-苯并噁嗪(MBEM). 采用自由基溶液聚合法, 以偶氮二异丁腈(AIBN)为引发剂, 以甲苯为溶剂, 以MBEM与N-苯基马来酰亚胺(NPMI)为单体, 合成了6-甲基-3-甲基丙烯酰氧乙基-3,4-2H-1,3-苯并噁嗪-co-N-苯基马来酰亚胺共聚物[P(MBEM-co-NPMI)]. 分别对MB-OH, MBEM, P(MBEM-co-NPMI)进行加热固化, 得到相应的交联聚合物PMB-OH, PMBEM和P[P(MBEM-co-NPMI)]. 对其结构、分子量和热性能进行了表征. 结果表明, PMB-OH, PMBEM, P[P(MBEM-co-NPMI)]的最大损耗因子tanδ_max对应的玻璃化转变温度(T_g)分别为92, 129和181℃, 最大损耗模量G"_max对应的T_g分别为56, 91和156℃. 在N₂气氛围下, PMB-OH, PMBEM, P[P(MBEM-co-NPMI)]失重5%的温度分别为257, 244和260℃; 失重10%的温度分别为280, 266和284℃; 800℃的残炭率分别为23.2%, 17.8%和14.0%. 表明P[P(MBEM-co-NPMI)]具有优异的耐热性能.     

超高分子量高阳离子度AM-DMC-DAC三元共聚物的合成及其絮凝性能

在较高阳离子含量下,合成了丙烯酰胺(AM)-甲基丙烯酰氧乙基三甲基氯化铵(DMC)-丙烯酰氧乙基三甲基氯化铵(DAC)三元共聚物.考察了引发剂浓度、单体浓度、反应体系pH及链转移剂对聚合反应产物黏度的影响.结果表明:该三元共聚物的特性黏度可以达到36 dL/g,溶解性能良好,阳离子度高,絮凝性能优良.     

水性可聚合二苯甲酮光引发剂的简便合成

以甲基丙烯酸-N,N-二甲基氨基乙酯为亲核试剂,分别与4-溴甲基二苯甲酮和4,4’-二(溴甲基)二苯甲酮在20℃下反应,并过简单的过滤,得到了两种水性可聚合二苯甲酮类光引发剂:4-[N-(2-甲基丙烯酰氧基乙基)二甲基溴化铵甲基]二苯甲酮(收率79.2%)和4,4’-双[N-(2-甲基丙烯酰氧基乙基)二甲基溴化铵甲基]二苯甲酮(收率79.7%)。产物用NMR、IR和元素分析进行了表征。     

Langmuir-Blodgett方法构建聚合物仿细胞外层膜结构涂层

以盖玻片为基质,采用Langmuir-Blodgett(LB)方法制备含磷酰胆碱基团的两亲性无规共聚物聚(2-甲基丙烯酰氧基乙基磷酰胆碱(MPC)-甲基丙烯酸十八烷基酯(SMA)-γ-甲基丙烯酰氧丙基三甲氧基硅(TSMA)(简称PMST)的单层、双层和三层薄膜.薄膜的表面亲疏水性和表面形貌分别用动态接触角(DCA)和原子力显微镜(AFM)进行测试.结果表明,PMST在盖玻片表面形成了致密的膜层,薄膜的致密程度随层数而增加.在水中前进/后退测试DCA过程中,聚合物薄膜在气相/水相界面存在基团的迁移取向,且膜层内会发生交联.双层膜具有仿细胞外层膜结构,单层和三层膜具有反细胞外层膜结构;双层膜的亲水性比单层和三层膜的要好.     

硫酸铵水溶液中分散聚合法制备两性共聚物P(AM-co-AA-co-DAC-co-DMC)

利用分散聚合技术,在硫酸铵水溶液中以丙烯酰胺(AM)、丙烯酸(AA)、丙烯酰氧乙基三甲基氯化铵(DAC)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,合成了两性共聚物P(AM-co-AA-co-DAC-co-DMC).用FTIR,13C-NMR,TEM等方法表征了聚合物的结构和组成.考察了不同分散稳定剂、正负离子单体配比和pH对分散聚合的影响,并对P(AM-co-AA-co-DAC-co-DMC)水基分散聚合条件及稳定性进行了一些探讨.实验表明,在硫酸铵水溶液中制得较稳定的P(AM-co-AA-co-DAC-co-DMC)分散体系,应选用非离子型或阳离子型的分散稳定剂,如聚乙烯吡咯烷酮(PVP)、聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)、聚丙烯酰氧乙基三甲基氯化铵(PDAC),而其pH应在2到4之间.当选用占总质量1.5%的聚乙烯吡咯烷酮(PVP)为分散稳定剂,引发温度为40℃,正负离子单体物质的量比值大于1,pH=3时,可以制得总离子度超过25%的纳米级两性聚合物.     

含三氟甲基吡啶酰胺结构的N-氰基磺酰亚胺衍生物的合成及生物活性

采用活性亚结构拼接法,设计合成了系列新型含三氟甲基吡啶酰胺结构的N-氰基磺酰亚胺类衍生物,其结构经1H NMR、~(13)C NMR、~(19)F NMR和HRMS进行了表征.评估了它们对柑橘溃疡病菌(Xanthomonas axonopodis pv. citri)、烟草青枯病菌(Ralstoniasolanacearum)和水稻白叶枯病菌(Xanthomonasoryzaepv.oryzae)的杀菌活性及对小菜蛾(Plutella xylostella)的杀虫活性.结果表明,部分化合物表现出了良好的抗菌活性和中等的杀虫活性.其中,在200 mg/L质量浓度下,3-氯-(2-(N-氰基-S-(3,4-二氟苄基)磺酰亚胺酰基)乙基)-5-(三氟甲基)吡啶酰胺(G10)对柑橘溃疡病菌、烟草青枯病菌和水稻白叶枯病菌的抑制率分别为67%、53%和48%,3-氯-(2-(N-氰基-S-(2,5-二氟苄基)磺酰亚胺酰基)乙基)-5-(三氟甲基)吡啶酰胺(G17)对柑橘溃疡病菌的抗菌活性为69%,(2-(S-(2-溴-4-氟苄基)-N-氰基磺酰亚胺基)乙基)-3-氯-5-(三氟甲基)吡啶酰胺(G14)对水稻白叶枯病菌的抑制率为49%.在100 mg/L时,(2-(S-(4-溴-2-氟苄基)-N-氰基磺酰亚胺基)乙基)-3-氯-5-(三氟甲基)吡啶酰胺(G1)、3-氯-(2-(N-氰基-S-(3-氟苄基)磺酰亚胺基)乙基)-5-(三氟甲基)吡啶酰胺(G7)、3-氯-(2-(N-氰基-S-(2,4-二氟苄基)磺酰亚胺酰基)乙基)-5-(三氟甲基)吡啶酰胺(G8)和G10也有中等的杀菌活性,在测试浓度下,部分化合物的活性略高于对照药剂或与之相当.此外,在500mg/L时,化合物G10和3-氯-(2-(N-氰基-S-(4-异丙基苄基)磺酰亚胺基)乙基)-5-(三氟甲基)吡啶酰胺(G11)对小菜蛾的致死率分别为77%和70%.     

Fire retardancy of bis[2-(methacryloyloxy)ethyl] phosphate modified poly(methyl methacrylate) nanocomposites containing layered double hydroxide and montmorillonite

Copolymer nanocomposites were prepared by suspension copolymerization of bis[2-(methacryloyloxy)ethyl] phosphate and methyl methacrylate, together with bis(2-ethylhexyl) phosphate layered double hydroxide and a montmorillonite, Cloisite 93A. X-ray diffraction and transmission electron microscopy were used to characterize the morphology of nanocomposites and the dispersion of additives in the polymer. The thermal stability of the nanocomposites has been assessed by thermogravimetric analysis and cone calorimetry has been used to study the fire properties. Bis[2-(methacryloyloxy)ethyl] phosphate not only copolymerized with MMA, but also aids in the dispersion of additives in PMMA. The copolymer nanocomposites have better dispersion and higher degradation temperature and more char mass than the corresponding PMMA nanocomposites. The largest peak reduction in the heat release rate of the copolymer nanocomposites are 52 and 65% for LDH and MMT additives, respectively.     

微波辅助萃取-气相色谱质谱法测定丙烯酸树脂中9种残余单体

建立了丙烯酸树脂中9种残余单体(丙烯酸甲酯、丙烯酸乙酯、甲基丙烯酸甲酯、甲基丙烯酸乙酯、丙烯酸丁酯、甲基丙烯酸丁酯、苯乙烯、丙烯酸、甲基丙烯酸)的微波辅助萃取-气相色谱-质谱检测方法。固体丙烯酸树脂样品用乙酸乙酯微波萃取后加甲醇沉淀(液态丙烯酸树脂样品直接用甲醇稀释)后,采用DB-WAX毛细管柱分离。结果表明,本方法在20 min内同时分离了9种单体,所测物质的定量限(LOQ,以信噪比为10计)为3～50 mg/kg(固体树脂)和1～10 mg/kg(液态树脂);在1～500 mg/L范围内,线性相关系数均在0.995以上;在5个添加水平下平均回收率为84.4%～108.6%,相对标准偏差(n=6)为0.27%～4.97%。方法的灵敏度和回收率高、选择性好,能满足实际工作的要求。     

Synthesis and photopolymerizations of new phosphonated monomers for dental applications

Three novel phosphonated methacrylate monomers have been synthesized and studied for use in dental applications. Two of the monomers were synthesized from the reactions of glycidyl methacrylate (GMA) with (diethoxy‐phosphoryl)‐acetic acid (monomer 1 ) and (2‐hydroxy‐ethyl)‐phosphonic acid dimethyl ester (monomer 2 ). These monomers showed high crosslinking tendencies during thermal bulk and solution polymerizations. The third monomer (monomer 3 ) was prepared by the reaction of bisphenol A diglycidylether (DER) with (diethoxy‐phosphoryl)‐acetic acid and subsequent conversion of the resulting diol to the methacrylate with methacryloyl chloride. The homopolymerization and copolymerization behaviors of the synthesized monomers were also investigated with glycerol dimethacrylate (GDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (bis‐GMA) using photodifferential scanning calorimetry at 40 °C using 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitiator. Monomer 1 showed polymerization rate similar or greater than dimethacrylates studied here but with higher conversion. The maximum rate of polymerizations decreased in the following order: 1 ～TEGDMA>GDMA～bis‐GMA～ 3 > 2 . A synergistic effect in the rate of polymerization was observed during copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2290–2299, 2008     

Polymeric Derivatives of Chloramphenicol and Their Antibacterial Properties

The polymerizable derivatives of chloramphenicol were prepared and free-radical copolymerized with acrylamide, methacrylic acid, and 2-(dimethylamino)ethyl methacrylate in order to obtain polymers with pharmacological activity. The monomeric and polymeric derivatives were subjected to antibacterial activity tests against Bacillus polymyxa.     

含咔唑生色基团的甲基丙烯酸酯类单体及其聚合物的荧光行为

对于含有给电子荧光生色团的丙烯酸类单体或含有受电子荧光生色团的乙烯氧基类单体的荧光行为的研究发现,这类单体都表现出一个共同的特点,即在相同生色团浓度下单体的荧光强度皆明显低于其相应的聚合物．我们将这种现象称为荧光“结构自猝灭效应”（ＳＳＱＥ）．这种现...     

Homogeneous and multiphase poly(methyl methacrylate) graft polymers via the macromonomer method

Anionic and group transfer polymerization processes were used to synthesize controlled molecular weight methacryloyloxy functionalized poly(dimethylsiloxane) and poly(methyl methacrylate) macromonomers having a narrow molecular weight distribution and high percent functionality. These macromonomers were anionically copolymerized with methyl methacrylate (MMA) to afford poly(methyl methacrylate)-graft-poly(methyl methacrylate) (PMMA-g-PMMA) and poly(methyl methacrylate)-graft-poly(dimethylsiloxane) (PMMA-g-PDMS) polymers having not only narrow molecular weight distribution graft parts but also backbone parts. The PMMA-g-PDMS system was fractionated using supercritical chlorodifluoromethane to determine its chemical composition distribution (CCD). The CCD for the PMMA-g-PDMS copolymerized in a living manner was substantially more narrow than the free radically copolymerized material. The PMMA-g-PMMA system was used to study the dilute solution properties of branched homopolymers. The appropriateness of the universal calibration gel permeation chromatography (GPC) method for branched systems exhibiting long chain branching was reaffirmed.     

长余辉光致发光聚甲基丙烯酸酯共聚物球粒的合成

过去仅用ＺｎＳ和ＣａＳ等的长余辉发光材料(发光时间只有十几分钟 )。加入少量Ｃｏ、Ｐｍ物质 ,发光时间延长 ,亮度提高 ,但Ｃｏ、Ｐｍ具有放射性。以铝酸盐为基料制备的发光材料发光时间 ,发光强度明显提高。铝酸盐掺杂少量稀土元素Ｄｙ、Ｅｕ ,制得发绿光的高亮度光致发光材料、余辉时间长达 1 5ｈ以上 ,而且该材料的使用寿命长 ,高达 1 0年以上[1 ] 。本文研制的发光球粒以甲基丙烯酸甲酯和丙烯酸乙酯为单体 ,少量的发光粉为关键组份 ,采用悬浮聚合方法合成得到。聚甲基丙烯酸甲酯(ＰＭＭＡ)具有优良的透明度、光泽度和强度 ,而且具有良…     

Change in Physico-chemical Properties of PMMA and PS by Copolymerization with an Anionic Amphiphilic Comonomer: Sodium 11-(methacryloyloxy) undecanylsulfate (MET)

Sodium 11-(methacryloyloxy) undecanylsulfate (MET) monomer units were incorporated in polystyrene (PS) and poly(methyl methacrylate) (PMMA) by free radical copolymerization in solution with styrene and methyl methacrylate, respectively. Experimental compositions, thermal degradations, average molecular weights, glass transitions and affinities for moisture were experimentally determined for copolymers of various compositions. Both styrene and methyl methacrylate copolymerized well with MET. An increase in the moisture affinity and a change in the glass transition were observed with increasing MET content in the respective copolymers.     

Synthesis and polymerizations of phosphonated‐bis(methacrylamide)s for dental applications

Novel phosphonate and phosphonic acid‐containing bis(methacrylamide)s were synthesized. The phosphonate‐containing monomers ( 1a and 1b ) were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride with diethyl 2‐aminoethylphosphonate and diethyl 1‐aminomethylphosphonate. The phosphonic acid‐containing monomers ( 2a and 2b ) were synthesized by hydrolysis of 1a and 1b with trimethylsilyl bromide (TMSBr). All monomers were liquids and dissolved in water and ethanol. Thermal homopolymerization of 1a and 1b in bulk and solution using 2,2′‐azobis(isobutyronitrile) (AIBN) at 80 °C gave crosslinked polymers indicating low cyclization tendencies of these monomers. They were also homopolymerized using photo‐DSC with 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitator, and their maximum rates of polymerization were found to be higher than commercial monomers 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) and 2‐hydroxyethyl methacrylate (HEMA), indicating their potential as reactive diluents or crosslinkers in dental materials. In fact, copolymerization with monomer 1a resulted in improvements in photopolymerization kinetics of both Bis‐GMA and HEMA. The acidic nature of the aqueous solutions (pH of 2a : 1.42, 2b : 1.53), stability under aqueous conditions after 1 month of study at 37 °C, interaction of 2a with hydroxyapatite (HAP) as representative of both monomers, and copolymerizability of the same with HEMA make these monomers suitable as adhesive monomers in dental adhesives, although their low observed reactivities may present a drawback. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The role of methacrylate polymerized as porous-layered and nanoparticle-bound phases for open-tubular capillary electrochromatography: substitution of a charged monomer for a bulk monomer

The bulk monomer, butyl methacrylate (BMA), was copolymerized with an ionizable monomer (mono-(2-(methacryloyloxy)ethyl) succinate (MES)) and carbon nanotubes (CNTs) by ethylene dimethacrylate (EDMA) crosslinking to form the porous-layered and nanoparticle-bound stationary phases for open-tubular CEC. Here, two new phases were synthesized to check the role of BMA on the BMA-MES and BMA-CNT phases and the suitability of the MES monomer for concurrently acting as a bulk monomer. One phase, MES-EDMA, was simply composed of MES monomer and EDMA crosslinker and exhibited a phase construction of molecular layers, in contrast to the polymeric phases of BMA-MES. Another phase studied was MES-CNT, which SEM images showed that MES could be a good bulk monomer for a CNT-polyacrylate composite phase with embedded CNTs. For all the modified capillaries, the EOF profiles observed in phosphate buffers between pH 3.6 and 9.6 were comparable with each other and conformed to their corresponding SEM images. The residual silanols retained their influence on the EOF profiles in the MES-EDMA and BMA-MES capillaries, but diminished in the CNT-bound capillaries. In a comparison with the MES-EDMA capillary, the BMA-MES capillary afforded a stronger interaction with flavonoids and phenolic acids and still retained positive capacity factor values. Additionally, the capacity factors obtained from the BMA-CNT capillary were higher than those from the MES-CNT capillary, as the BMA-CNT phase had hydrophobic BMA units and a high surface contact area of bound CNTs.