薄膜生长中的表面动力学(Ⅰ)

本文较全面地从理论上研究了薄膜生长过程中原子在表面上的和种动力学表现，涉及的内容包括亚单层生长时，原子在表面上的扩散，粘接，成核，以及已经形成的原子岛之间的相互作用，兼并，失稳，退化等一系列过程，作为研究的基础。在本文的第一部分（即0-6章）中，我们首先介绍了目前这方面理论研究中所主要使用的各种方法。例如，第一性原理计算，分子动力学模拟。蒙特卡罗模拟。速率方程和过渡态（TST）理论等。基于这些研究。我们介绍给读者为什么原子成岛时在低温下选择分形状，而在高温时则选择紧致状。这一过程可以用经典的扩散子限制集聚理论（Diffusion-Limited Aggregation,DLA)。然而当有表面活性剂存在时形核的规律安全相反，由此提出了一个反应限制集聚理论（Reaction-Limited Aggregation,RLA)，这两个理论目前可以很好的解释亚单层生长时的一般形核规律。接下来我们讨论了长程相互作用对生长初期原子形核的影响。并进一步得出了相应的标度理论。在第6章我们系统地研究了分了吸附对二维原子岛形状的控制性，从而提出了边-角原子扩散的对称破缺模型。     

薄膜生长中的表面动力学(Ⅰ)

本文较全面地从理论上研究了薄膜生长过程中原子在表面上的各种动力学表现 ,涉及的内容包括亚单层生长时 ,原子在表面上的扩散 ,粘接 ,成核 ,以及已经形成的原子岛之间的相互作用 ,兼并 ,失稳 ,退化等一系列过程。作为研究的基础 ,在本文的第一部分 (即0～ 6章 )中 ,我们首先介绍了目前这方面理论研究中所主要使用的各种方法。例如 ,第一性原理计算 ,分子动力学模拟 ,蒙特卡罗模拟 ,速率方程和过渡态 (TST)理论等。基于这些研究 ,我们介绍给读者为什么原子成岛时在低温下选择分形状 ,而在高温时则选择紧致状。这一过程可以用经典的扩散子限制集聚理论 (Diffusion_LimitedAggregation ,DLA)。然而当有表面活性剂存在时形核的规律完全相反 ,由此提出了一个反应限制集聚理论 (Reaction_LimitedAggregation,RLA)。这两个理论目前可以很好地解释亚单层生长时的一般形核规律。接下来我们讨论了长程相互作用对生长初期原子形核的影响 ,并进一步得出了相应的标度理论。在第 6章我们系统地研究了分了吸附对二维原子岛形状的控制性 ,从而提出了边 角原子扩散的对称破缺模型。     

A scanning tunneling microscopy study of the adsorption of Xe on Pt(111) up to one monolayer

The adsorption of Xe on Pt(111) has been investigated from the arrival of the very first atoms up to completion of the monolayer using a variable-temperature Scanning Tunneling Microscope (STM). Surprisingly, in the initial stages of the adsorption Xe preferentially binds to a low coordination site, theupper edge of the platinum steps. The strong binding to these sites leads to a local repulsive interaction with further Xe atoms. Therefore, the Xe atoms located at the upper edge of the steps do not serve as nuclei for 2D Xe islands, which, instead, form on the terraces and at thelower edges of the platinum steps. Only during completion of the monolayer do these islands make contact with the atoms adsorbed at the beginning in the upper-edge positions. The full monolayer exhibits the Hexagonal Incommensurate Rotated (HIR) phase already known from earlier helium-diffraction experiments.     

Atomic processes in vacancy island motion on Ag(111)

We present results of molecular dynamics simulations of the motion of monatomic-deep vacancy islands on Ag(111), using interaction potentials from the embedded atom method. The individual processes appearing in a large set of runs, at three different temperatures, are identified. From the statistics thus collected, we find that the predominant mechanism underlying the diffusion of vacancy islands on Ag(111) is the diffusion of atoms along the periphery of the vacancy islands.     

Atomistic simulation of Fe deposition and alloy formation on Pt substrates

Fe-Pt alloys are of significant importance toward future applications of high-density magnetic recording media. In this work, we apply the BFS method for alloys to study the energetic pathway for subsurface Fe-Pt alloy formation upon deposition of Fe atoms on Pt(1 0 0), Pt(1 1 1), and vicinal Pt(9 9 7) substrates. The simulation results indicate preference for Fe atoms to occupy sites in the Pt subsurface layers and form an ordered alloy phase upon deposition on a low-index Pt surface. This behavior results in Pt surface segregation leading to nucleation of 3D Pt islands. However, the energetics behind deposition of Fe on Pt(9 9 7) indicate that Fe atoms prefer decoration of Pt step edges prior to formation of the ordered Fe-Pt surface alloy, where the ordered alloy is observed to form at the edges of the monoatomic surface steps. In each case presented here, the results are in agreement with experiment, and the formation of a Fe-Pt subsurface alloy is explained by a simple analysis emerging from the competition between BFS strain and chemical energy contributions.     

Theoretical study of the Ni growth on Pt stepped surfaces

We have investigated the growth of Ni on Pt stepped surfaces with (1 1 1) terraces by means of potentials derived from the second moment approximation in a tight-binding model. The activation energies associated to these processes are determined. The Schwoebel barriers of Ni atoms descending steps of Pt stepped surfaces are calculated for different kinds of straight steps (A and B steps) differing by the orientation of the ledge. In addition, we study the diffusion of Ni adatoms at fcc or hcp sites in the presence of small adislands on the terraces, in the vicinity of the A and B steps. We show that a good estimate of the potential wells and diffusion barriers could be given by introducing a lateral effective pair interaction model, the interactions extending up to the next nearest neighbors. Finally, we have carried out Kinetic Monte-Carlo simulations to investigate the Ni wire formation at Pt step edges and the influence of the exchange processes in the alloy formation.     

Comparative investigation on decorating carbon nanotubes with different transition metals

The diffusion dynamics and structure evolvement of the transition metal (TM=Ni, Cu, Au, and Pt) atoms decorating carbon nanotubes (CNTs) with differences have been systematically studied by Monte Carlo (MC) simulation. The studies show that TM atoms can be encapsulated inside, aggregated and even wrapped on the surface of the CNT, which depend on the interactions among TM–TM and TM–C during the spontaneous diffusion process. The decorating effect is greatly influenced by the diameters of CNTs, TM atoms tend to be encapsulated inside the tube in the relatively large CNTs, while they are inclined to stack on the surface for the small ones. More interestingly, Au and Pt atoms would wrap around the smaller CNT, whereas Ni and Cu atoms are still clustering outside of the CNTs with the increase of the number of TM atoms. Simulation results indicate that Pt and Au possess a better wetting effect with CNT than Ni and Cu.     

薄膜生长中的表面动力学(Ⅱ)

本文较全面地从理论上研究了薄膜生长过程中原子在表面上的各种动力学表现 ,涉及的内容包括亚单层生长时 ,原子在表面上的扩散 ,粘接 ,成核 ,以及已经形成的原子岛之间的相互作用 ,兼并 ,失稳 ,退化等一系列过程。在第一部分 (即 0～ 6章 ,刊登在《物理学进展》2 3卷 1期上 )介绍了薄膜生长动力学的基础之后 ,从第 7章开始我们侧重研究一个在向同性和各向异性表面都普遍成立的原子岛尺寸大小及密度分布的标度定律 ;建立了一套研究在各向同性和各向异性表面上二维原子岛退化过程的广义动力学标度理论。基于对层间质量扩散通道的研究 ,本文提出了两种不同的原子下跃机制 ,既任意跃迁机制和选择跃迁机制 ,并做了进一步的实验验证。利用这一新的层间质量扩散机制 ,我们成功地解释了实验上观测到的三维原子岛的退化规律。更加有趣的是 ,本文讨论了应力对岛的形状和各种动力学规律的影响。在最后我们还提出了一个利用凝聚能转化来控制二维原子岛生长的方法 ,其目的是希望能够找到一种人为有效地在表面上制备低维量子结构的方法。     

薄膜生长中的表面动力学(Ⅱ)

本文较全面地从理论上研究了薄膜生长过程中原子在表面上的各种动力学表现，涉及的内容包括亚单层生长时，原子在表面上的扩散，粘接，成核，以及已经形成的原子岛之间的相互作用，兼并，失稳，退化等一系列过程。在第一部分(即0—6章，刊登在《物理学进展》23卷1期上)介绍了薄膜生长动力学的基础之后，从第7章开始我们侧重研究一个在向同性和各向异性表面都普遍成立的原子岛尺寸大小及密度分布的标度定律；建立了一套研究在各向同性和各向异性表面上二维原子岛退化过程的广义动力学标度理论。基于对层间质量扩散通道的研究，本文提出了两种不同的原子下跃机制，既任意跃迁机制和选择跃迁机制，并做了进一步的实验验证。利用这一新的层间质量扩散机制，我们成功地解释了实验上观测到的三维原子岛的退化规律。更加有趣的是，本文讨论了应力对岛的形状和各种动力学规律的影响。在最后我们还提出了一个利用凝聚能转化来控制二维原子岛生长的方法，其目的是希望能够找到一种人为有效地在表面上制备低维量子结构的方法。     

Three-Ni-atom cluster formed by sulfur adsorption on Ni(1 1 1)

Sulfur adsorption on Ni(1 1 1) at room temperature has been studied by scanning tunneling microscopy. Irregularly-shaped islands, which are aggregates of small particles, appear with troughs on (1 1 1) terraces. Estimating the number of small particles in the irregular islands and that of Ni atoms ejected through the formation of troughs, we find that each small particle contains three Ni atoms. A three-Ni-atom cluster is proposed, where three S atoms are adsorbed on 4-fold hollow sites formed on the sides of the cluster. The Ni₃S₃ cluster can assume two orientations on the (1 1 1) surface. We show that the apparently-irregular distribution of small particles is well understood by assuming the alternate orientation of neighboring Ni₃S₃ clusters and the slight energy difference between the two orientations of a single Ni₃S₃ cluster. Real-time observation of a Ni(1 1 1) surface under H₂S ambience reveals that small islands composed of three or four Ni₃S₃ clusters change their positions rapidly, preventing the simple growth of islands at the initially-nucleated positions.     

Reactions and structures of water on clean and oxygen covered Pt(111) and Fe(100)

An atom superposition and election delocalization (ASED) technique applied to water adsorption on a small cluster model of Pt(111) shows weak and reversible chemisorption and facile and reversible hydrogen transfer to preadsorbed oxygen atoms as observed by Fisher, Sexton and Gland in EELS and UPS studies. Our theory predicts much stronger adsorption of water to Fe(100) with low barriers to dehydrogenation, in agreement with high temperature LEED-Auger results of Dwyer, Simmons, and Wei and wide temperature range XPS studies of Akimov. We predict a low barrier to transfer of hydrogen from water to adsorbed oxygen atoms, forming hydroxyl groups on the iron surface, and a fairly low barrier to the reverse reaction. On both metals we find hydroxyl groups are strongly held. Our calculations produce a trend toward greater negativity on going from adsorbed water to hydroxyl groups, and to hydroxyl dissociation products on these surfaces. We present reaction mechanisms, transition state geometries, and analysis in terms of molecular orbital theory and the total energy. It is found that the platinum is generally less reactive than iron toward water and hydroxyl species because platinum orbitals are less diffuse and the platinum s-d band lies lower, closer to adsorbate energy levels such that adsorbate-platinum antibonding orbitals are filled.     

Monte carlo simulations of growth modes of Pb nanoislands on Si(111) surface

The growth of Pb islands on a Si(111) surface exhibits many interesting properties. For example, the self-assembled process results in a homogeneous distribution of Pb islands with uniform height. The dependence of this height on coverage and temperature can be expressed as a phase diagram [1]. In this paper we develop a model of the growth process that reflects the main features of the experimental observations and determines the key processes of quantum dot formation in a Pb/Si(111) system. The growth of islands is simulated by the Monte Carlo method. With suitably chosen parameters the model is able to reconstruct the phase diagram, via the dependence of the dynamics of Pb atoms on area and height. These dependencies are attributed to stress energy and quantum size effects.     

Electrolytic loading of hydrogen in metals studied by PAC

In previous work, we introduced hydrogen (H) into Ni and Pt metals at room temperature by electrolysis. To study H-vacancy interactions on an atomic scale, trapping of diffusing H atoms at impurity-vancancy complexes was detected using perturbed γ-γ angular correlations. Two new results are reported here: (1) Transformation rules are clarified between undecorated and H-decorated complexes which are detected after annealing Pt at 323 K. In addition, non-cubic In sites were observed to form by chargingannealed, Pt, which are attiributed either to H atoms at random in the lattice or to precursor nuclei of a Pt hydride. (2) NiH is observed to form under cathodic charging of Ni at high current densities, and detected by growth of a nonmagnetic, cubic metastable phase.     

In situ STM study of nanosized Ru and Os islands spontaneously deposited on Pt(1 1 1) and Au(1 1 1) electrodes

We provide an overview of structure and reactivity of selected bimetallic single crystal electrodes obtained by the method of spontaneous deposition. The surfaces that are described and compared are the following: Au(1 1 1)/Ru, Pt(1 1 1)/Ru and Pt(1 1 1)/Os. Detailed morphological information is presented and the significance of this work in current and further study of nanoisland covered surfaces in the catalytic and spectroscopic perspective is highlighted. All surfaces were investigated by in situ STM and by electroanalytical techniques. The results confirm our previous data that nanosized Ru islands are formed with specific and distinctive structural features, and that the Ru growth pattern is different for Au(1 1 1) and Pt(1 1 1). For Au(1 1 1), Ru is preferentially deposited on steps, while a random and relatively sparse distribution of Ru islands is observed on terraces. In contrast, for Ru deposited on Pt(1 1 1), a homogeneous deposition over all the Pt(1 1 1) surface was found. Os is also deposited homogeneously, and at a much higher rate than Ru, and even within a single deposition it forms a large proportion of multilayer islands. On Au(1 1 1), the Ru islands on both steps and terraces reach the saturation coverage within a short deposition time, and the Ru islands grow to multilayer heights and assume hexagonal shapes. On Pt(1 1 1), the Ru saturation coverage is reached relatively fast, but when a single deposition is applied, Ru nanoislands of mainly monoatomic height are formed, with the Ru coverage not exceeding 0.2 ML. For Ru deposits on Pt(1 1 1), we demonstrate that larger and multilayer islands obtained in two consecutive depositions can be reduced in size--both in height and width--by oxidizing the Ru islands and then by reducing them back to a metallic state. A clear increase in the Ru island dispersion is then obtained. However, methanol oxidation chronoamperometry shows that the surface with such a higher dispersion is less active to methanol oxidation than the initial surface. A preliminary interpretation of this effect is provided. Finally, we studied CO stripping reaction on Pt(1 1 1)/Ru, Au(1 1 1)/Ru and on Pt(1 1 1)/Os. We relate CO oxidation differences observed between Pt(1 1 1)/Ru and Pt(1 1 1)/Os to the difference in the oxophilicity of the two admetals. In turn, the difference in the CO stripping reaction on Pt(1 1 1)/Ru and Au(1 1 1)/Ru with respect to the Ru islands is linked to the effect of the substrate on the bond strength and/or adlayer structure of CO and OH_ads species.     

The growth and alloy formation of copper on the platinum (111) and stepped (553) crystal surfaces; characterization by Leed,AES, and CO thermal desorption

Epitaxial layers of copper were formed on Pt(111) and Pt(553) single crystal surfaces by condensation of copper atoms from the vapor. Surface alloys were formed by diffusing the copper atoms into the platinum substrate at temperatures above 550 K. The activation energy for this process was found to be ~ 120 $\text{kJ}\text{mol}$. These Pt/Cu surfaces were characterized by LEED, AES, and TDS of CO. The copper grows in islands on the Pt(111) surface and one monolayer is completed before another begins. There is an apparent repulsive interaction between the copper atoms and the step sites of the Pt(553) surface which causes a second layer of copper to begin forming before the first layer is complete. Epitaxial copper atoms block CO adsorption sites on the platinum surface without affecting the CO desorption energy. When the copper is alloyed with the platinum however, the energy of desorption of CO from the platinum was reduced by as much as 20 $\text{kJ}\text{mol}$. This reduction in the desorption energy suggests an electronic modification that weakens the Pt-CO bond.     

Preparation of platinum nanoparticles by sonochemical reduction of the Pt(IV) ions: role of surfactants

Sonochemical reduction processes of Pt(IV) ions in water have been investigated in the presence of various kinds of surfactants such as sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfonate (DBS) as anionic surfactants, and polyethylene glycol monostearate (PEG-MS) as non-ionic, dodecyltrimethylammonium chloride (DTAC) and bromide (DTAB) as cationic surfactants. An improved colorimetric determination reveals that Pt(IV) ion is reduced to zero valent metal in two steps: step (1)--Pt(IV) ion to Pt(II) ion, and step (2)--Pt(II) ion to Pt(0), and after the completion of step (1), step (2) sets in. It appears that rapid scrambling reactions among platinum ions and/or atoms, that is, Pt(I) + Pt(IV)-->Pt(II) + Pt(III), etc. take place. In the sonolysis of aqueous solutions of SDS, DBS or PEG-MS, two kinds of organic reducing radicals, R(ab) and R(py), are proposed to contribute to the reduction. Radical R(ab) is formed from the reaction of the surfactants with primary radicals such as hydroxyl radicals and hydrogen atoms originated from the sonolysis of water, and radical R(py) is formed from the direct thermal decomposition of surfactants in the interfacial region between the collapsing cavities and the bulk water. R(ab) is effective for both the reduction steps, whereas R(py) is involved only in the reduction step (1). This fact coincides with the previous reported sonochemical reduction of Pt(II) ions. Hydrogen atoms themselves scarcely participate in the reduction. The average diameter (1.0 nm) of platinum particles prepared from the system of PEG-MS is smaller than those from the aqueous solution of anionic surfactant SDS (3.0 nm) and DBS (3.0 nm).     

Morphological,Structural, and Compositional Evolution of Pt–Ni Octahedral Electrocatalysts with Pt‐Rich Edges and Ni‐Rich Core: Toward the Rational Design of Electrocatalysts for the Oxygen Reduction Reaction

The progress in colloidal synthesis of Pt–Ni octahedra has been instrumental in rising the oxygen reduction reaction catalytic activity high above the benchmark of Pt catalysts. This impressive catalytic performance is believed to result from the exposure of the most active catalytic sites after an activation process, chemical or electrochemical, which leads to a Pt surface enrichment. A foremost importance is to understand the structure and the elemental distribution of Pt–Ni octahedral, which leads to an optimal catalytic activity and stability. However, the factors governing the synthesis of the Pt–Ni octahedra are not well understood. In this study, unprecedented surface atomic segregation of Pt atoms in a Ni‐rich Pt–Ni octahedral nanoparticle structure is established by advanced electron microscopy. The Pt atoms are almost exclusively located on the edges of the Pt–Ni octahedra. This structure is formed in a pristine form, i.e., prior to any chemical or electrochemical etching. A new growth mechanism is revealed, which involves the transformation from an octahedron with a Pt‐rich core to a Ni‐rich octahedron with Pt‐rich edges. This observation may pave the way for a deeper understanding of this class of Pt–Ni octahedral nanoparticles as an electrocatalyst.     

Controlling the self-ordering behaviour of nanostructures on patterned substrates

We use molecular dynamics simulations to show how 2D anchoring patterns on a substrate can be utilised to accurately control the placement and morphology of nucleating 3D nanostructures. The 2D anchoring patterns for our model system consisted of a Pt ad-atom island on a Pt substrate with a surrounding monolayer of Ag atoms. The crystallographic direction of the Pt/Ag boundaries comprising the 2D anchoring pattern and the shape of the pattern was found to have a significant effect on the resultant 3D nanostructures to the extent that one can force nanostructures to have unstable facets, changing the appearance of nanostructures completely. We used the Pt/Ag system as a model to study the effects of square, rectangular and triangular anchoring patterns on Pt(111) and Pt(100) substrates. However, the processes observed are thought to result from the successful altering of the growth mode from Frank–Van der Merwe to Volmer–Weber growth; hence, these processes should be quite general and applicable to other systems.     

Metal deposition onto thiol-covered gold: Platinum on a 4-mercaptopyridine SAM

In this study we describe details of a new technique that allows to deposit metal on top of a self-assembled monolayer (SAM). Monoatomic high platinum islands were formed on a 4-mercaptopyridine SAM on Au(1 1 1) by first immersing the SAM-covered gold electrode in an aqueous solution of K₂PtCl₄ without potential control to allow Pt(II) ions to form a complex with the pyridine nitrogen. The complexed Pt(II) ions were then reduced electrochemically to Pt(0) after transferring the electrode to a Pt(II) ion-free solution. Upon reduction, monoatomic high Pt islands were observed in STM, the total coverage depending on the time for complexation. Ex situ angle-resolved XPS studies reveal that the Pt islands indeed reside on top of the SAM.     

Diffusions of small clusters on Pt(1 1 1) and Cu(1 1 1) surfaces

Diffusions of small cluster Pt₆ on Pt(1 1 1) surface and Cu₆ on Cu(1 1 1) are studied by molecular dynamics simulation, respectively. The atomic interaction is modeled by the semiempirical potential. The results show that the diffusion processes in the two systems are far different. For example, on Pt(1 1 1) surface, the hopping of single atom and the shearing of two atoms of hexamer only occur on the adatom(s) adsorbed at B-step, while on Cu(1 1 1) surface they can appear on the adatom(s) either at A-step or B-step. To the concerted translation of the parallelogram hexamer, the anisotropy in the diffusion path is observed in the two systems, the mechanisms and then the preferential paths, however, are completely different. The reasons for these diffusion characteristics and differences are discussed.