An experimental study of acoustic scattering from thermocline in shallow sea

I.IntroductionThetemperature,salinityandstaticprcssureofscawaterchangewithdepth,whichformsthcsoundvelocityvertica1distributioninthesea.Duringsummcrscason,thercaren0n-uniformthermoclinelaycrsinthedepths0fshallowseaal0ngChinacoast.Wearenowabletodeducctheimpedanccproflle(pc)byechoesofacousticwavesfr0mvarioustherm0c1ine1ayers.Thewaterdcnsityvaricsonlyslight1y,hencetheac0usticve1ocityde-Pendsmainlyonthetemperatureofseawatcr,andthercfore,itispossiblctorecordthcdepthofthermoclinelaycrsbyusingacoust…     

Finite difference time domain modelling of sound scattering by the dynamically rough surface of a turbulent open channel flow

The problem of scattering of airborne sound by a dynamically rough surface of a turbulent, open channel flow is poorly understood. In this work, a laser-induced fluorescence (LIF) technique is used to capture accurately a representative number of the instantaneous elevations of the dynamically rough surface of 6 turbulent, subcritical flows in a rectangular flume with Reynolds numbers of 10,800?Re?47,300$10\text{,}800?\text{Re}?47\text{,}300$ and Froude numbers of 0.36?Fr?0.69$0.36?\mathit{Fr}?0.69$. The surface elevation data were then used in a finite difference time domain (FDTD) model to predict the directivity pattern of the airborne sound pressure scattered by the dynamically rough flow surface. The predictions obtained with the FDTD model were compared against the sound pressure data measured in the flume and against that obtained with the Kirchhoff approximation. It is shown that the FDTD model agrees with the measured data within 22.3%. The agreement between the FDTD model and stationary phase approximation based on Kirchhoff integral is within 3%. The novelty of this work is in the direct use of the LIF data and FDTD model to predict the directivity pattern of the airborne sound pressure scattered by the flow surface. This work is aimed to inform the design of acoustic instrumentation for non-invasive measurements of hydraulic processes in rivers and in partially filled pipes.     

Measurement of the sound velocity in fluids using the echo signals from scattering particles

With conventional methods the sound velocity c in fluids can be determined using the back wall echo. This paper proposes a novel technique, in which the signals reflected by scattering particles suspended in a fluid are analysed instead. The basic idea is that the particles generate the strongest echo signal when being located in the sound field maximum. Therefore the position of the echo signal maximum is a measure for the propagation time to the sound field maximum. Provided that calibration data or sound field simulations for the ultrasonic transducer are available, this propagation time suffices to determine both sound velocity and the location of the sound field maximum. The feasibility of the new approach is demonstrated by different kinds of experiments: (i) Measurements of the sound velocity c in four fluids covering the wide range between 1116 and 2740 m/s. The results show good agreement with values published elsewhere. (ii) Using the dependence of the sound velocity on temperature, it is possible to vary c over the comparatively small range between 1431 and 1555 m/s with increments of less than 10 m/s. The measured statistical variation of 1.4 m/s corresponds to a relative uncertainty not worse than 0.1%. (iii) The focus position, i.e. the distance of the maximum of the sound field from the transducer, was varied by time-shifted superposition of the receive signals belonging to the different elements of an annular array. The results indicate that the novel method is even capable of measuring profiles of the sound velocity along the ultrasonic beam non-invasively.     

温跃层边界提取的组合算法*

本文提出一种用于海洋温跃层边界提取的组合算法,该算法基于调整判定阈值后的垂直梯度法和一种改进函数模型几何形态后的拟阶梯函数逼近法。为验证该算法对于温跃层边界提取的适应性、客观性,利用中国Argo实时资料中心发布的全球海洋Argo网格资料集（BOA_Argo）,选取2018年夏季0°~30°N,135°E~165°E所在的太平洋区域的温度剖面数据进行处理,结果表明,该算法对低纬度海区温度剖面拟合质量较好,拟合均方根误差普遍低于1.3℃,而且提取到的温跃层上下边界在纬向更加平缓,然而对于中高纬度海区的温度剖面,组合算法的处理效果不佳,更适合直接通过垂直梯度法进行温跃层的提取。     

Effect of a honeycomb on the sound absorption characteristics of panel-type absorbers

Panel-type sound absorbers are commonly used to absorb low-frequency sounds. Recently, a new type of panel/membrane absorbers has been proposed as a next-generation sound absorber free from environmental problems. On the other hand, it is known that placing a honeycomb structure behind a porous layer can improve sound absorption performance and a similar effect can be obtained for microperforated-panel absorbers. Herein, the sound absorption characteristics of a panel sound absorber with a honeycomb in its back cavity are theoretically analyzed. The numerical results are used to discuss the variations in the sound absorption characteristics due to the honeycomb as well as the mechanism for sound absorption.     

Sound scattering by a resistive and axially symmetric object in a two-layer ocean

An acoustically resistive and axially symmetric object is placed in a two-layer ocean very far from a point source of acoustic waves. The object is either floating in the water layer or buried in the sediment layer. Both layers are homogenous. The size of the object is small when compared to the depth of the water channel. The free surface of the sea is assumed to be soft and the bottom is assumed to be hard. Between the two layers the classical diffraction boundary conditions are taken. An extension of the Deep Water Approximation method [Ergatis P. Radiation, propagation and scattering of acoustic waves in an underwater environment. PhD thesis, University of Patras; 1997 (in Greek)] is being provided to cover the case of resistive scatterers [Colton, D., Kress, R. Integral equation methods in scattering theory. New York: Wiley; 1983].     

Sound pulse scattering from an edge of thick elastic plates:experimental and numerical investigations

I.IntroductionItisdifficulttoanaIysesoundscattcringfromanedgeofathickpIatetheoretica11y.Inmostprevious.ork['-'],thecdgcdifTractionsofidca1ha1fp1aneswereconsidered,i.e.theplanesarepcrfcct1yhardorpcrfcctlysoftoroncsurfacehardandonesurfacesoftandtheirthicknessisneg1cctcd,thccorrespondingthporicsarcquitecomp1ctc.Inthisstudy,thecdgcscattcringfromthickelasticplatesinwatcrisinvestigated.Theex'perimentalrcsultsarccxamincdphysica1lybythcp1atethcoryandcomparcdquantitative1ywithca1culationsfromanumeric…     

Dynamics of the thermocline in the equatorial region of the Pacific ocean

This paper is devoted to the subsurface current dynamics in equatorial regions, where the hallmark of a strong stratification is a sharp interface (thermocline), separating two layers of different density, and whose depth is dependent upon the strength of the winds above the ocean's surface. We give here a few monotonicity results concerning the dynamics of the thermocline in the equatorial region. The most important one asserts that the level of the thermocline decreases as the strength of the wind at ten meters above the ocean surface, denoted |U_w|, increases. Moreover, the strength of the current at the thermocline decreases as |U_w| increases.     

利用海洋环境噪声估计浅海海底表层声速

为提高反演效率,提出一种快速估计浅海海底表层声速的方法。根据噪声能流理论,垂直阵接收的海洋环境噪声数据能够用于无源提取海底反射损失,反射损失曲线中具有明显的临界角效应,从而接估计海底表层声速。以射线模型为基础,推导了噪声提取的反射损失与理论值之间的差异,并讨论实际阵列波束形成在不同角度和频率下的性能。考虑到非等声速环境下声线会发生弯曲,需对角度进行修正以提高方法的广泛适用性。不同频率的临界角与有效深度之间存在对应关系,黄海某海区数据处理结果表明,在临界角不变的有效深度内,海底表层可以视为等声速层,该海区海底表层0.5 m内声速估计结果为1547 m/s,与有源反演结果相近。     

Characterizing the sound quality of air-conditioning noise

The aim of the psychoacoustic study presented here was to characterize listeners' preferences for a set of sounds produced by different brands and models of indoor air-conditioning units. In addition, some synthetic sounds, created by interpolation between recorded sound samples, were integrated into the set. The multidimensional perceptual space and the corresponding physical space representative of the sound set were determined with multidimensional scaling (MDS). Then the preferences for different classes of listeners were related to the physical space. The best spatial model yielded by the MDS had three common dimensions and specificities. The three dimensions are correlated with the ratio of the noisy part of the spectrum to the harmonic part (NHR), with the spectral center of gravity (SC) and with loudness (N). Two classes of listeners can be distinguished in terms of preference. For one, preference varied primarily with loudness, whereas for the other it varied more with SC and NHR. However, for one class the preference grew with the parameter NHR, while it decreased for the other class. The results replicate under different laboratory conditions and indicate the usefulness of this sound quality assessment approach for characterizing appliance noises.     

Study on the effect of sound duration on the annoyance of helicopter noise by applying a technique of time compression and expansion of sound signals

The number of helicopter operations has rapidly increased during the last 20 years in Japan. Helicopter noise sounds different from other aircraft; the waveform of the sound pressure is impulsive and the signal duration is relatively long. The Environmental Agency of Japan implemented new guidelines for evaluating noise exposure around small airports, including heliports, in 1990. This study was executed in connection with the development of provisional guidelines. Psychoacoustic experiments were carried out to identify an evaluation index for helicopter noise. In order to examine the effect of duration independently, we not only used original sound recordings, but also synthesized sound signals. The durations of these sound signals were time compressed or expanded without degrading the quality of the original sound recording. The test results show that the effect of duration is significant, and that the A-weighted sound exposure level is a better index than the maximum A-weighted sound pressure level for the evaluation of helicopter noise.     

Factors influencing the sound preference in urban open spaces

In this paper, based on a large scale survey in Europe and China as well as corresponding laboratory studies, the influencing factors on the sound preference evaluation, considering social, demographical, physical, behavioural and psychological facets, have been systematically examined based on statistical analyses for each of the 19 case study sites. Various sound types have been considered, including natural, human, mechanical and instrumental sounds. In terms of social/demographical factors, the results suggest that age and education level are two factors which universally influence the sound preference significantly, although the influence may vary with different types of urban open spaces and sounds. With increasing age or education level, people tend to prefer natural sounds and are more annoyed by mechanical sounds in general. It has also been found that gender, occupation and residence status generally would not influence the sound preference evaluation significantly, although gender has a rather strong influence for certain sound types such as bird sounds, especially at certain case study sites. In terms of physical factors (season, time of day), behavioural factors (frequency of coming to the site, reason for coming to the site), and psychological factors (site preference), generally speaking, their influence on the sound preference evaluation is insignificant, except for limited case study sites and certain sound types. The influence of home sound environment, in terms of sounds heard at home, on the sound preference has been found to be generally insignificant, except for certain sounds. It is noted that there are some correlations between social/demographical factors and the studied physical/behavioural/psychological factors, which should be taken into account when considering the influence of individual factors on sound preference.     

基于声场重建的材料吸声系数测量方法

针对现有方法对材料吸声系数进行现场测量时存在低频测量误差大的问题,本文提出了一种利用扬声器线阵列对材料吸声系数进行现场测量的新方法。该方法使用基于能量比值约束的最小二乘法在待测材料表面进行平面波声场重建并结合双传声器传递函数法对材料的吸声系数进行测量。数值仿真表明在100～1600 Hz频率范围内,新方法在未加约束时能够对材料的吸声系数进行准确测量。在半消声室中利用新方法测量了三聚氰胺泡沫的吸声系数,分析了能量比值约束值对测量结果的影响,并和阻抗管以及其它两种现场测量方法的测量结果进行了对比。结果表明该方法能够对吸声材料在160～1600 Hz频段内的吸声系数进行准确测量,并且相较于现存的现场测量方法,新方法具有更低的测量频率下限。     

微粒子的线度对Mie散射光强度影响的研究

根据Mie散射理论,研究了粒子线度对Mie散射光强的影响,不同性质的粒子,其影响效果不同,在固定入射波长条件下,散射光强随粒子线度呈周期变化,同时发现H2O微粒子散射光强峰峰间距与粒子的线度和波长的关系可简单的表示为Δa=-0.133 3+0.222λ.     

On the accuracy of the ray-tracing algorithms based on various sound receiver models

In this paper, the effect of sound ray detection on the accuracy of sound field simulation by using the ray-tracing technique has been discussed. The current methods to define the receiver size have been briefly described. Then a new equation for the computation of the size of a receiver has been proposed and it has considered such factors as the size of the room, the number of initial rays and the distance from source to receiver. The corresponding algorithm has been compared with two other algorithms that are based on different receiver models. It can be concluded from the computed and measured results that the new model is applicable for more extensive situations.     

Calculation of sound radiant efficiency and sound radiant modes of arbitrary shape structures by BEM and general eigenvalue decomposition

In this paper, a numerical method is presented to calculate sound radiant efficiency and radiant modes of arbitrary shape structures. Some methods have been proposed to compute sound radiant efficiencies and sound radiant modes of plates and beams. However, there is not a valid method to calculate for arbitrary shape structures except for measurement at the present time. The method proposed can predicate the sound radiant efficiencies and the sound radiant modes for arbitrary shape structures by boundary element method (BEM) and general eigenvalue decomposition. The validity of this method is demonstrated by two numerical examples of pulsating sphere and radiation cube.     

波叠加法在结构辐射声功率计算中的应用

描述了用波叠加法来计算任意形状辐射体的辐射声功率的方法。该方法在给定辐射体表面的振动速度后就可求解辐射源的强度,进而求解辐射体表面声功率。文中以脉动球源的辐射问题为列,讨论了波叠加法在应用过程中对单元、节点数目以及单元形状的敏感性。通过将该方法计算结果与解析结果进行对比表明,运用此方法在保证较高精度的前提下能明显减少计算所需的单元节点数,从而节省时间提高计算效率。     

论声压级平均算法

本文阐述了求声压级平均值的几种算法,特别论述了对声压级数据直接进行算术平均的运算方法。     

利用自发布里渊散射测量液体声速

为了克服共振干涉法在液体的热力学声速和高频声速测量方面精度不高的问题, 本文建立了一种基于自发布里渊散射原理的测定液体声速的实验装置. 利用法布里-珀罗干涉仪对散射光进行扫描滤波, 数据采集卡结合光子计数器对散射光进行探测, 设计了一种散射光信息采集分析方法. 该实验方法有效的解决了传统布里渊散射方法中信号失真的问题, 显著地提升了液体声速测量精度. 对308.6–906.2 MHz内298.15 K饱和液相CCl₄声速进行了测量, 测量结果与文献值具有较好一致性. 利用法布里-珀罗干涉仪周期性扫描的滤波原理, 通过在测量得到的布里渊频移上加减整数倍个自由波谱区, 得到了更大频率的波谱信息, 进而设计一种测定介质高频声速的方法. 对CCl₄在5406.1–5521.0 MHz频段内的声速进行了测量. 实验结果显示, CCl₄的热力学声速随频率无明显变化, 而高频声速随频率的增大呈增大趋势且远大于热力学声速, 证实CCl₄具有色散现象.