Rapid determination of the volatile components in tobacco by ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction with gas chromatography‐mass spectrometry

An ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction was first employed to determine the volatile components in tobacco samples. The method combined the advantages of ultrasound, microwave, and headspace solid‐phase microextraction. The extraction, separation, and enrichment were performed in a single step, which could greatly simplify the operation and reduce the whole pretreatment time. In the developed method, several experimental parameters, such as fiber type, ultrasound power, and irradiation time, were optimized to improve sampling efficiency. Under the optimal conditions, there were 37, 36, 34, and 36 components identified in tobacco from Guizhou, Hunan, Yunnan, and Zimbabwe, respectively, including esters, heterocycles, alkanes, ketones, terpenoids, acids, phenols, and alcohols. The compound types were roughly the same while the contents were varied from different origins due to the disparity of their growing conditions, such as soil, water, and climate. In addition, the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method was compared with the microwave‐assisted extraction coupled to headspace solid‐phase microextraction and headspace solid‐phase microextraction methods. More types of volatile components were obtained by using the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method, moreover, the contents were high. The results indicated that the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction technique was a simple, time‐saving and highly efficient approach, which was especially suitable for analysis of the volatile components in tobacco.     

Application of solid-phase microextraction to the recovery of explosives and ignitable liquid residues from forensic specimens

A current review of the application of solid-phase microextraction (SPME) to the analysis of ignitable liquids and explosive residues is presented along with experimental results demonstrating the relative effects of controllable variables. Variables discussed include fiber chemistry, adsorption and desorption temperatures, extraction and desorption times, fiber sampling placement (direct, headspace, and partial headspace) and matrix effects, including water content. SPME is shown to be an inexpensive, rapid and sensitive method for the analysis of ignitable liquids and high explosives residues from solid debris samples and from aqueous samples. Explosives are readily detected at parts per trillion concentrations and ignitable liquids are reproducibly detected at levels below those using conventional methods.     

Determination of tobacco alkaloids using solid phase microextraction and GC-NPD

Summary The sampling approaches using solid phase microextraction (SPME) were evaluated for the analysis of tobacco alkaloids. Because of their low volatility and ionic nature, sampling alkaloids from the headspace of dry or wet tobacco samples often required more effort to improve extraction efficiency. Directly dipping the SPME fiber coated with polydimethylsiloxane film into the tobacco extract was proved to be a simple, effective tool for sampling alkaloids from tobacco. When combined with the practice of fast GC and nitrogen-phosphorus detection, nicotine and a group of selected minor alkaloids (i.e., nornicotines, myosmine, anabasine and anatabine) were separated with baseline resolution within 3 min. The detection limits for these alkaloids are below 0.1 μg mL⁻¹. In addition, the carry-over problem frequently occurred in alkaloids analysis was eliminated. The influence of tobacco matrix and fiber aging on the partition of alkaloids, as well as the use of an internal standard to compensate these deviations, were also studied.     

新型固相微萃取膜的制备及其在生物检材中毒物提取的应用

用酰胺类化合物和气相色谱固定液制备了一种新型固相微萃取膜,对膜的性质、吸附解吸条件进行了研究;应用该类固相微萃取膜成功地分离了尿液中的吗啡、苯巴比妥以及血液中的敌敌畏,并利用气相色谱-质谱联用技术对分离后的样品进行了分析。     

固相微萃取新技术

 固相微萃取是基于萃取涂层与样品之间的吸附 /溶解 解吸平衡而建立起来的集进样、萃取、浓缩功能于一体的技术。综述了固相微萃取技术的最新发展动态 ,介绍了管内 (in tube)固相微萃取、新型萃取头以及固相微萃取与其他分析技术的联用情况。     

样品前处理-色谱分析在线联用技术的研究进展

样品前处理是色谱分析中耗时最多、最容易引起误差的关键环节,因此有关样品前处理技术与色谱分析的在线联用的研究已成为分析化学的前沿课题。本文综述了近年来各种样品前处理技术与色谱分析在线联用的研究进展,包括固相萃取、固相微萃取与液相微萃取、膜辅助萃取、场作用辅助萃取、气相萃取、热解吸以及微芯片分离技术。     

Comparison of solid phase microextraction and hollow fiber liquid phase microextraction for the determination of pesticides in aqueous samples by gas chromatography triple quadrupole tandem mass spectrometry

This work compares two miniaturised sample preparation methods, solid phase microextraction (SPME) and hollow fiber liquid phase microextraction (HF-LPME), in combination with gas chromatography coupled to tandem mass spectrometry with a triple quadrupole analyzer for the determination of 77 pesticides in drinking water. In the case of SPME, extraction temperature and time were optimized by experimental design, although other parameters, as desorption time, pH, and ionic strength, were also evaluated. The extraction and desorption solvents [octanol/dihexyl ether (75:25, v/v) and cyclohexane, respectively], as well as the extraction and desorption time, ionic strength, and pH, were studied for the HF-LPME procedure. Under the optimal conditions, recoveries (70.2–113.5% for SPME and 70.0–119.5% for HF-LPME), intra-day precision (2.1–19.4% for SPME and 4.3–22.5% for HF-LPME), inter-day precision (5.2–21.5% for SPME and 8.4–27.3% for HF-LPME), and limits of detection, between 0.1 and 28.8 ng/L for SPME and 0.2 and 47.1 ng/L for HF-LPME and overall uncertainty (9.6–25.2% for SPME and 13.3–27.5% for HF-LPME) were established for both extraction procedures. Finally, the proposed methods were successfully applied to the analysis of 41 drinking water samples, and similar results were obtained with both extraction approaches.     

采用溶胶-凝胶技术涂层的新型固相微萃取方法及其应用

将溶胶-凝胶技术应用于SPME固相涂层的制备,涂制的端羟基-聚二甲基硅氧烷固相涂层热稳定性好,萃取时间和解吸时间短,对极性化合物及非极性化合物均有较强的萃取富集能力。扫描电镜图显示涂层表面为多孔结构。采用该涂层的SPME方法在对环境样品的分析中获得了令人满意的效果。     

固相微萃取中高分子涂层的研究

聚甲基乙烯基硅氧烷首次被用作固相微萃取（ＳＰＭＥ）装置的固相涂层,通过顶空固相微萃取气相色谱分析（ＨＳ－ＳＰＭＥ－ＧＣ）对使用聚甲基乙烯基硅氧烷固相涂层的ＳＰＭＥ装置进行了评价。对其使用厚度、温度及选择性进行了较深入的研究,找到了它的最佳使用条件和适用范围,并与商品化的ＳＰＭＥ涂层作了比较。对ＨＳ－ＳＰＭＥ－ＧＣ和ＨＳ－ＧＣ两种方法也作了比较,指出两者的适用范围不同。     

Sampling free and particle‐bound chemicals using solid‐phase microextraction and needle trap device simultaneously

The possibility of sampling the free and particle‐bound concentrations of organic compounds was studied using two different sampling techniques at the same time: needle trap device (NTD) and solid‐phase microextraction (SPME). In this study, a mosquito coil was used to produce gaseous (free) and particle‐bound compounds. Allethrin, the active ingredient in mosquito coils, was chosen as the target analyte. Under the same sampling conditions, the amount of allethrin extracted from the mosquito‐coil smoke was higher for the NTD compared to the SPME fiber, while the extracted amounts were almost the same for both devices when sampling gaseous samples of allethrin. These results can be explained by the fact that the SPME fiber can only extract free molecules (based on diffusion), whereas the NTD, an exhaustive sampling device, collects both free and particle‐bound allethrin. Breakthrough for NTD and carryover for both NTD and SPME were negligible under the given sampling and desorption conditions.     

SPME-GC联用测定环境水样中的酚类化合物

建立了固相微萃取与气相色谱联用技术测定环境水样中酚类化合物的方法. 探讨了pH、离子强度、萃取头类型、萃取时间以及解析时间等条件对酚类化合物萃取量的影响, 优化了GC仪器条件. 在优化的条件下, 酚类化合物的响应值与浓度有良好的线性关系, 线性范围为0.20～200 μg/L, 检出限在0.019～0.10 μg/L之间, 相对标准偏差(RSD, n=5)为4.4%～11%, 水样平均加标回收率为92.2%～101.9%, 所建立的方法可测定环境水样中的酚类化合物.     

Headspace single-drop microextration for the detection of organotin compounds

The performance of single-drop microextraction (SDME), coupled with gas chromatography/mass spectrometry, was assessed for the determination of tributyltin compounds in water and solid samples. Experimental parameters impacting the performance of SDME, such as microextraction solvent and sampling and stirring time, were investigated. Analytical results obtained by SDME were compared with those generated by conventional solid phase microextraction (SPME) and liquid-liquid extraction (LLE) for the determination of TBT in PACS-2 sediment certified reference material (CRM).     

Silicone glue coated stainless steel wire for solid phase microextraction

A new solid phase microextraction (SPME) fiber based on high-temperature silicone glue coated on a stainless steel wire is presented. The fiber coating can be prepared easily in a few minutes, it is mechanically stable and exhibits relatively high thermal stability (up to 260 °C). The extraction properties of the fiber to benzene, toluene, ethylbenzene, and xylenes (BTEX) were examined using both direct and headspace SPME modes coupled to gas chromatography-flame ionization detection. The effects of the extraction and desorption parameters including extraction and desorption time, sampling and desorption temperature, and ionic strength on the extraction/desorption efficiency have been studied. For both headspace and direct SPME the calibration graphs were linear in the concentration range from 0.5 μg L⁻¹ to 10 mg L⁻¹ (R² > 0.996) and detection limits ranged from 0.07 to 0.24 μg L⁻¹. Single fiber repeatability and fiber-to-fiber reproducibility were less than 6.8 and 21.5%, respectively. Finally, headspace SPME was applied to determine BTEX in petrol station waste waters with spiked recoveries in the range of 89.7-105.2%.     

Selective determination of alkylmercury compounds in solid matrices after subcritical water extraction,followed by solid‐phase microextraction and GC–MS

A method for the extraction and determination of methylmercury (MeHg) in solid matrices is presented. Combining the advantages of two extraction techniques—subcritical water extraction (subWE) and solid‐phase microextraction (SPME)—selective separation of MeHg from soils is possible. The procedure is based on extraction with subcritical water without using organic solvents, followed by in situ aqueous‐phase derivatization with sodium tetraethylborate and headspace SPME with a silica fiber coated with poly(dimethylsiloxane). The optimization of the extraction parameters is described. The identification and quantification of the extracted alkylmercury compounds from spiked soil samples is performed by GC–MS after thermal desorption. Copyright © 2000 John Wiley & Sons, Ltd.     

Determination of Trace Bisphenol A in Leachate by Solid Phase Microextraction Coupled with High Performance Liquid Chromatography

Abstract

A rapid determination method for trace bisphenol A in leachate by solid phase microextraction (SPME) coupled with high performance liquid chromatography (HPLC) was developed. The experimental condition of SPME, such as select operation, solid phase microextraction fibers, pH, extraction time, extraction temperature, desorption time, desorption solution, mode, and the analytical conditions of HPLC were optimized. As compared with the graph that was produced by HPLC alone, the graph by only HPLC couldn't analyze bisphenol A and compared to the results of three solid‐phase microextraction fibers. The linear range was between 0.0128 mg/L and 0.192 mg/L in this method, and the correlative coefficient was 0.9975. Limits of detection, repeatability, and reproducibility were also determined. The limit of detection of this method was 3.25 µg/L (3σ, n=11). The relative standard deviation (RSD, n=3) was 4.4%. The method was used for the determination of trace bisphenol A in leachate of Qingshan landfill and leachate of Liufang landfill. The recoveries were between 94.5% and 103.3%. This method is fast, convenient, sensitive, solvent free, and suitable for the determination of trace bisphenol A in leachate.     

微波辅助萃取-固相微萃取-气相色谱法同时测定茶叶中的有机氯和拟除虫菊酯农药残留

建立了微波辅助萃取-固相微萃取-气相色谱(MAE-SPME-GC)同时测定茶叶中六六六(α-BHC,β-BHC,γ-BHC,δ-BHC 4种异构体)、滴滴涕类(DDD,DDE,o,p′-DDT,p,p′-DDT)、氯氰菊酯(cypermethrin)和氰戊菊酯(fenvalerate)等10种农药残留的方法。采用外标法定量,除氰戊菊酯外,农药的质量浓度与其色谱峰面积在一定范围内有较好的线性关系,相关系数为0.9705～0.9984。10种组分的加标回收率为64%～121%,相对标准偏差为10.4%～22.9%,检测限为1～50 ng/L。应用该方法测定了市场上3种茶叶中上述农药残留的含量。     

羰基铁粉掺杂整体柱萃取-在线热解吸进样气相色谱-串联质谱法分析茶叶样品中拟除虫菊酯类农药残留

制备了羰基铁粉掺杂硅胶整体柱，用于拟除虫菊酯类农药残留萃取，并与气相色谱-串联质谱（GC-MS/MS）法联用，建立了在线富集、热解吸GC-MS/MS测定茶叶样品中拟除虫菊酯类农药残留方法。研究将端羟基聚二甲基硅氧烷共价键合到SiO₂网络表面，并同时键合羰基铁粉。将目标分析物吸附并浓缩在聚二甲基硅氧烷位点上后，利用羰基铁粉的高频感应加热特性成功实现了GC-MS/MS直接气体进样并可达到快速、均匀解吸的目的。实验结果表明，在最佳条件下，本方法的富集倍数可达到约1000倍。拟除虫菊酯类农药残留的检出限为3.8~7.5 μg/kg，相对标准偏差为3.2%~6.8%（n=6）。该方法的提取回收率为97.7%~110.5%，相关系数≥0.9960。该法的吸附容量大，在电磁感应的条件下进行热脱附继而直接与GC-MS结合实现在线分析以及无溶剂洗脱。与常规固相微萃取（SPME）方法相比，该方法具有富集因子高、整体柱吸附容量大、可重复使用、自动化程度高、普适性好等优点。在样品前处理及复杂基质中农药残留的提取方面具有重要的研究意义。     

超声波提取-固相萃取净化-气相色谱法分析烟草中拟除虫菊酯类农药及氟节胺残留

建立了超声波提取-固相萃取净化-气相色谱联用测定烟草中多种拟除虫菊酯类农药及氟节胺残留量的方法。与现行标准方法相比,本方法前处理简单、快速、有机溶剂消耗量少,且增加了分析目标物的数量。8种拟除虫菊酯类农药及氟节胺在0.1、0.5和1μg/g三个加标水平的回收率为86%～111%,相对标准偏差为0.2%～4.1%,满足当前烟草农药残留的检测要求。     

GC�CMS and GC�CNPD Determination of Formaldehyde Dimethylhydrazone in Water Using SPME

Formaldehyde dimethylhydrazone (FADMH) is one of the important transformation products of residual rocket fuel 1,1-dimethylhydrazine (1,1-DMH). Thus, recent studies show that FADMH toxicity is comparable to that of undecomposed 1,1-DMH. In this study, a new method for quantification of FADMH in water based on solid phase microextraction (SPME) in combination with gas chromatography (GC) with mass spectrometric (MS) and nitrogen-phosphorus detection (NPD) is presented. Effects of SPME fiber coating type, extraction and desorption temperatures, extraction time, and pH on analyte recovery were studied. The optimized method used 65 micron polydimethylsiloxane/divinylbenzene fiber coating for 1?min headspace extractions at 30?°C. Preferred pH and desorption temperature from the SPME fiber are >8.5 and 200?°C, respectively. Detection limits were estimated to be 1.5 and 0.5?μg?L(-1) for MS and NPD, respectively. The method was applied to laboratory-scale experiments to quantify FADMH. Results indicate applicability for in situ sampling and analysis and possible first-time detection of free FADMH in water.     

自制固相微萃取装置对水中5种农药残留量的分析

合成了一种丙烯酸酯聚合物,并将其作为固相微萃取涂层,使用自制的SPME装置和气质联用仪对水样中5种农药残留量进行分析,该装置制作简单、价格低廉.对影响分析灵敏度的各种实验因素进行了优化,在优化条件下分析5种农药标准样品质量浓度在1～1000 μg/L内与色谱峰面积呈良好的线性关系(r=0.995～0.999),检出限为0.391～1.170 ng/L.将自制涂层与商品涂层(PA)进行了比较,自制涂层对5种农药具有优良的吸附特性,较低的检出限.