Nickel(II)-azido/thiocyanato complexes of 1-alkyl-2-(naphthylazo)imidazole

[Ni(NaiR)₂(X)₂] (X = N₃ (3, 4) and NCS (5, 6) complexes are synthesized from the reaction of Ni(ClO₄)₂ · 6H₂O with 1-alkyl-2-(naphthyl-α/β-azo)imidazole (α/β-NaiR) and sodium azide (NaN₃) or ammonium thiocyanate (NH₄NCS) (1:2:2 molar ratio) in methanol solution. The complexes are characterized by elemental, spectroscopic and magnetic study. The distorted octahedral structure has been confirmed by single crystal X-ray diffraction study of [Ni(β-NaiEt)₂(NCS)₂] (6b). Cyclic voltammogram exhibits quasireversible oxidation response at 0.3–0.4 V which is corresponding to Ni(III)/Ni(II) couple along with ligand reductions at negative potential to SCE reference electrode.     

Flux synthesis of (3,4)-connected zinc phosphites with different framework topologies

Two three-dimensional open-framework zinc phosphites, H₂aem·Zn₃(HPO₃)₄·0.5H₂O (1) and H₂apm·Zn₃(HPO₃)₄ (2), have been synthesized by a phosphorous acid flux method, where aem=4-(2-aminoethyl)morpholine and apm=4-(3-aminopropyl)morpholine. Compound 1 crystallizes in the monoclinic system, P2₁/c, a=9.5852(7) Å, b=20.3941(8) Å, c=10.5339(8) Å, β=94.125(9)°, V=2053.8(2) Å³, Z=4, R₁=0.0319, wR₂=0.0628. Compound 2 crystallizes in the monoclinic system, P2₁/n, a=8.589(2) Å, b=14.020(3) Å, c=16.606(3) Å, β=97.190(8)°, V=1983.9(7) Å³, Z=4, R₁=0.0692, wR₂=0.1479. Both compounds are based on (3,4)-connected networks with 8- and 12-ring channels, which are constructed from Zn₃(HPO₃)₄ clusters as the same secondary building units. These inorganic clusters are spatially organized by different structure-directing agents into different three-dimensional frameworks.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Hemilability of 2-(1H-imidazol-2-yl)pyridine and 2-(oxazol-2-yl)pyridine ligands: Imidazole and oxazole ring Lewis basicity,Ni(II)/Pd(II) complex structures and spectra

Fourteen new organic molecules A1–A4, B1–B5, C1–C4 and D and a series of transition metal(II) complexes (Ni1–Ni9 and Pd1–Pd2b) were synthesized and studied in order to characterize the hemilability of 2-(1H-imidazol-2-yl)pyridine and 2-(oxazol-2-yl)pyridine ligands (A1–A4 = 2-R²-6-(4,5-diphenyl-1R¹-imidazol-2-yl)pyridines, R¹ = H or CH₃, R² = H or CH₃; B1–B5 = 1-R²-2-(pyridin-2-yl)-1R¹-phenanthro[9,10-d]imidazoles/oxazoles, R¹ = H or CH₃, R² = H or CH₃; C1–C4 = 2-(6-R²-pyridin-2-yl)-1H-imidazo/oxazo[4,5-f][1,10]phenanthrolines, R² = H or CH₃; D = 2-mesityl-1H-imidazo[4,5-f][1,10]phenanthroline). They were also used to study the substituent effects on the donor strengths as well as the coordination chemistries of the imidazole/oxazole fragments of the hemilabile ligands.All the observed protonation–deprotonation processes found within pH 1–14 media pertain to the imidazole or oxazole rings rather than the pyridyl Lewis bases. The donor characteristics of the imidazole/oxazole ring can be estimated by spectroscopic methods regardless of the presence of other strong N donor fragments. The oxazoles possessed notably lower donor strengths than the imidazoles. The electron-withdrawing influence and capacity to hinder the azole base donor strength of 4,5-azole substituents were found to be in the order phenanthrenyl (B series) > 4,5-diphenyl (A series) > phenanthrolinyl (C series). An X-ray structure of Ni5b gave evidence for solvent induced ligand reconstitution while the structure of Pd2b provided evidence for solvent induced metal–ligand bond disconnection.Interestingly, alkylation of 1H-imidazoles did not necessarily produce the anticipated push of electron density to the donor nitrogen. Furthermore, substituents on the 4,5-carbons of the azole ring were more important for tuning donor strength of the azole base. DFT calculations were employed to investigate the observed trends. It is believed that the information provided on substituent effects and trends in this family of ligands will be useful in the rational design and synthesis of desired azole-containing chelate ligands, tuning of donor properties and application of this family of ligands in inorganic architectural designs, template-directed coordination polymer preparations, mixed-ligand inorganic self-assemblies, etc.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

Synthesis of 4,4-bis(2-hydroperoxyalkyl)pyrazolidine-3,5-diones using manganese(III)-catalyzed autoxidation

The autoxidation of a mixture of 1,2-disubstituted pyrazolidine-3,5-diones 1 and alkenes 2 in the presence of a catalytic amount of manganese(III) acetate dihydrate in air gave 4,4-bis(2-hydroperoxyalkyl)pyrazolidine-3,5-diones 3 in 75-96% yields. The structure of the bis(2-hydroperoxyethyl)pyrazolidine-3,5-dione 3 (R¹=R²=Ph, R³=R⁴=4-FC₆H₄) has been corroborated by an X-ray single crystallographic analysis. On the other hand, the manganese(III) acetate oxidation of a mixture of 1 (R¹=R²=Ph) and 2 (R³=R⁴=Ph) at elevated temperature gave 4,4-bis(2,2-diphenylethenyl)-1,2-diphenylpyrazolidine-3,5-dione (4) in good yield.     

Iron(II) and cobalt(II) complexes bearing 8-(1-aryliminoethylidene) quinaldines: Synthesis, characterization and ethylene dimerization behavior

The series of bidentate N^N iron(II) and cobalt(II) complexes containing 8-(1-aryliminoethylidene) quinaldine derived ligands, 8-[2,6-(R¹)₂-4-R²-C₆H₂NC (Me)]-2-Me-C₁₀H₅N, were synthesized and characterized by elemental and spectroscopic techniques. The molecular structures of Co1 (R¹ = Me, R² = H), Co3 (R¹ = ⁱPr, R² = H) and Co4 (R¹ = R² = Me) were confirmed as the distorted tetrahedral by single crystal X-ray diffraction. On treatment with modified methylaluminoxane (MMAO), these complexes exhibited good catalytic activities of up to 5.71 × 10⁵ g mol⁻¹(Fe) h⁻¹ for the ethylene dimerization at 30 °C under 10 atm of ethylene, in which iron pre-catalysts produced butenes with a high selectivity for α-butene. The correlation between metal complexes, catalytic activities and the product formed were investigated under various reaction parameters.     

2-(1-Aryliminoethylidene)quinolylnickel(II) dibromides: Synthesis, characterization and ethylene dimerization capability

A series of 2-(1-aryliminoethylidene)quinoline derivatives (L1-L9) and the nickel(II) dibromides (C1-C9) thereof, were synthesized and characterized. The molecular structures of C2 (R¹ = Et, R² = H, R = Me) and C9 (R¹ = ⁱPr, R² = H, R = ⁱPr) were confirmed as being distorted tetrahedral at nickel by single crystal X-ray diffraction. On treatment with diethylaluminium chloride (Et₂AlCl) or ethylaluminum sesquichloride (EASC), these nickel pre-catalysts exhibited high activity for selective ethylene dimerization (0.89-3.29 × 10⁶ g mol⁻¹(Ni) h⁻¹) at 20 °C under 10 atm of ethylene. The influence of the reaction parameters on the catalytic behaviour was investigated for these nickel systems, including variation of Al/Ni molar ratio and reaction temperature.     

Metal–metal bond cleavage of carbene complexes by halogens: The crystal and molecular structures of ax-[Mn2(CO)9{C(OEt)2-thienyl}], [Mn(CO)4(I){C(OEt)2-thienyl}] and eq-[Mn2(CO)9{C(NH2)2-thienyl}]

The metal–metal bond in [M₂(CO)₉{C(OEt)R}] (M = Mn (1), Re (2), R = 2-thienyl (a), 2-bithienyl (b)) is readily cleaved with halogens to afford cis-[M(CO)₄(X){C(OEt)R}] (M = Mn (3), X = I; M = Re (4), X = Br). In the binuclear manganese complex, the carbene ligand is found in an axial position due to steric reasons, whereas the electronically favoured equatorial position is found for the carbene ligands in the corresponding rhenium complexes and in [Mn₂(CO)₉{C(NH₂)thienyl}] (5a), containing a sterically less demanding NH₂-substituent.     

Synthesis of 5-alkyl-5-aryl-1-pyrroline N-oxides from 1-aryl-substituted nitroalkanes and acrolein via Michael addition and nitro reductive cyclization

A general method for accessing 5-alkyl-5-aryl-1-pyrroline N-oxides (AAPOs) has been established using readily available aryl bromides, nitroalkanes, and acrolein as the starting materials. The palladium-catalyzed arylation of nitroalkanes gave the 1-aryl-substituted nitroalkanes, which underwent the Et₃N-catalyzed Michael addition with acrolein at room temperature to afford the 4-aryl-4-nitroaldehydes. The latter were then subjected to the nitro reductive cyclization using Zn–HOAc in EtOH at 0 °C followed by warming the reaction mixture to room temperature for 24 h, furnishing the 5-alkyl-5-aryl-1-pyrroline N-oxides in good overall yields. Selected examples of 1,3-dipolar cycloaddition of the cyclic nitrones with methyl methacrylate were also described.     

New metastable hybrid phase,Zn2(OH)2(C8H4O4), exhibiting unique oxo-penta-coordinated Zn(II) atoms

The metastable phase (phase 1) Zn(OH)₂(tp)₂ (tp = C₈H₄O₄^2?) was found to be an intermediate forming during the hydrothermal synthesis of Zn₃(OH)₄tp (phase 2). Its structure has been determined ab initio from synchrotron powder diffraction data and refined with the Rietveld method: space group P2₁/c, a = 3.48856(2) Å, b = 5.84645(2) Å, c = 22.1331(1) Å, β = 103.46(1)°, D_x = 2.488 g/cm³, R_p = 0.10, R_B = 0.095 (402 independent reflections). The structures of the two analogues were compared. Whereas a mixed coordination of the zinc atoms was found in phase 2, phase 1 exhibits only penta-coordinated Zn(II). Moreover, different optical properties were observed, Zn₂(OH)₂(tp) showing photoluminescence at 378 nm under λ_ex = 316 nm.     

Dioxomolybdenum(VI) complexes containing 1-alkyl-2-ethyl-3-hydroxy-4-pyridin-4(1H)-ones

Dioxomolybdenum(VI) complexes derived from ethyl maltol (2-ethyl-3-hydroxy-4-pyrone) and 1-alkyl-2-ethyl-3-hydroxy-4-pyridin-4(1H)-ones have been prepared and characterized using physical methods including ¹H- and ¹³C-n.m.r. spectroscopy, i.r., elemental analysis, and X-ray diffraction for the pyrone and 3-methylpyridine pyridinone derivatives. The octahedral complexes have the general formula cis-MoO₂L₂ where L = the deprotonated pyrone or pyridinone ligand.     

Oxidation and nitrosation of 4-(3-alkylureido)-2, 2, 6, 6-tetramethylpiperidine-1-oxyls to 4-(3-alkyl-3-nitrosoureido)-2, 2, 6, 6-tetramethyl-1-oxopiperidinium salts

4-(3-Alkylureido)-2, 2, 6, 6-tetramethylpiperidine-1-oxyls are rapidly oxidized by N₂O₄ or NOCl to 4-(3-alkylureido)-2, 2, 6, 6-tetramethyl-1-oxopiperidinium nitrates and chlorides, which are then nitrosated to 4-(3-alkyl-3-nitrosoureido)-2, 2, 6, 6-tetramethyl-1-oxopiperidinium salts. The perchlorates of the latter were prepared by an exchange reaction with HClO₄. The nitrosation of alkylureidooxoammonium salts is the first example of chemical modification of oxoammonium derivatives in which the highly reactive >N⁺=O group is inert toward the reagent.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 542–547, March, 1993.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

Synthesis,characterization and crystal structures of 2-[(E)-2-(4-hydroxy-3,5-dimethylphenyl)-1-diazenyl]benzoic acid and its polymeric and monomeric triorganotin(IV) complexes

Three triorganotin(IV) complexes of composition R₃SnLH (R = Me, Bu and Ph and LH = 2-[(E)-2-(4-hydroxy-3,5-dimethylphenyl)-1-diazenyl]benzoate) have been synthesized and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, and IR spectroscopic techniques in combination with elemental analysis. The crystal structures of the carboxylate ligand HO₂CC₆H₄{NN(C₆H₂-4-OH-3,5-(CH₃)₂)}-o in its neutral form and three triorganotin(IV) complexes, viz., polymeric (R₃Sn[O₂CC₆H₄{N–N(H)(C₆H₂-4-O-3,5-(CH₃)₂)}-o])_n (R = Me (1) and Bu (2)) and monomeric Ph₃Sn[O₂CC₆H₄{N–N(H)(C₆H₂-4-O-3,5-(CH₃)₂)}-o] (3) complexes are reported. The polymeric complexes 1 and 2 exist as extended chains in which the LH-bridged Sn-atoms adopt a trans-R₃SnO₂ trigonal bipyramidal configuration with R groups in the equatorial positions and the axial sites occupied by an oxygen atom from the carboxylate ligand and the phenoxide O atom of the next carboxylate ligand. The Sn atom in complex 3 has a distorted tetrahedral geometry. In all three complexes, the carboxylate ligand is in the zwitterionic form with the phenolic proton moved to the nearby azo nitrogen atom, in contrast to the free carboxylic acid ligand which is in the azo form.     

Synthesis,characterization and crystal structures of 2-[(E)-2-(4-hydroxy-3,5-dimethylphenyl)-1-diazenyl]benzoic acid and its polymeric and monomeric triorganotin(IV) complexes

Three triorganotin(IV) complexes of composition R₃SnLH (R = Me, Bu and Ph and LH = 2-[(E)-2-(4-hydroxy-3,5-dimethylphenyl)-1-diazenyl]benzoate) have been synthesized and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, and IR spectroscopic techniques in combination with elemental analysis. The crystal structures of the carboxylate ligand HO₂CC₆H₄{NN(C₆H₂-4-OH-3,5-(CH₃)₂)}-o in its neutral form and three triorganotin(IV) complexes, viz., polymeric (R₃Sn[O₂CC₆H₄{N–N(H)(C₆H₂-4-O-3,5-(CH₃)₂)}-o])_n (R = Me (1) and Bu (2)) and monomeric Ph₃Sn[O₂CC₆H₄{N–N(H)(C₆H₂-4-O-3,5-(CH₃)₂)}-o] (3) complexes are reported. The polymeric complexes 1 and 2 exist as extended chains in which the LH-bridged Sn-atoms adopt a trans-R₃SnO₂ trigonal bipyramidal configuration with R groups in the equatorial positions and the axial sites occupied by an oxygen atom from the carboxylate ligand and the phenoxide O atom of the next carboxylate ligand. The Sn atom in complex 3 has a distorted tetrahedral geometry. In all three complexes, the carboxylate ligand is in the zwitterionic form with the phenolic proton moved to the nearby azo nitrogen atom, in contrast to the free carboxylic acid ligand which is in the azo form.     

Synthesis of the (1S,2S)- and (1R,2S)-stereoisomers of the respective E- and Z-isomers of ethyl 4-[(2-hydroxycyclohexyl)methyl]phenoxy-3-methyl-2-butenoate using yeast whole cell bioreduction of the parent ketones

Saccharomyces cerevisiae, strain DBM 2115, was successfully employed in the reduction of the separated Z- and E-isomers of ethyl 4-[(2-oxocyclohexyl)methyl]phenoxy-3-methyl-2-butenoates 1 and 2, in order to prepare the (1S,2S)- and (1R,2S)-enantiomers of the corresponding ethyl 4-[(2-hydroxycyclohexyl)methyl]phenoxy-3-methyl-2-butenoates 3–6. The products were obtained with the required absolute configuration: (1S,2S)-3 (ee = 98%; yield 48%), (1R,2S)-4 (ee = >99%; yield 45%), (1S,2S)-5 (ee = 98.5%; yield 47%), and (1R,2S)-6 (ee = >99%; chemical yield 44%).     

Ce(H2O)(PO4)3/2(H3O)1/2(H2O)1/2, a second entry in the structural chemistry of cerium(IV) phosphates

A cerium(IV) phosphate has been prepared using precipitation methods and its structure has been solved by single crystal X-ray diffraction (R₁ = 0.0292 for 3092 reflections with I>2σ(I) and wR₂ = 0.0540). Ce(H₂O)(PO₄)_3/2(H₃O)_1/2(H₂O)_1/2 crystallises in the monoclinic space group C2/c (a = 15.7058(17) Å, b = 9.6261(9) Å, c = 10.1632(4) Å, ß = 121.623(7)°, and V = 1308.4 (2) Å³). Its structure is based on a negatively charged 3D framework, made of cerium atoms connected by PO₄ tetrahedra. There are two types of PO₄ units; one shares only corners with the cerium coordination polyhedra while the other one shares edges and corners. This structure also includes hydronium cations, to balance the framework charge, and water molecules. One special feature of this 3D framework is the formation of interconnected tunnels which extend along the c axis and contain the hydronium cations and the water molecules. This open framework and the presence of cationic species in the tunnels are in perfect agreement with the previously reported ion exchange properties.     

Iminophosphines: synthesis, formation of 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and N-(pyridin-2-yl)-2-diphenylphosphinoylaniline, coordination chemistry and applications in platinum group catalyzed Suzuki coupling reactions and hydrosilylations

The aprotic and protic bi- and multidentate iminophosphines 2-Ph₂PC₆H₄N=CR¹R² (R¹=H, R²=Ph=2a; R¹=Me R²=Ph=2b; R¹=H, R²=2-thienyl=2c; R¹=H, R²=C₆H₄-2-PPh₂=2d; R¹=H, R²=C₆H₄-2-OH=2e, R¹=H, R²=C₆H₄-2-OH-3-Bu^t=2f; R¹=H, R²=CH₂C(O)Me=2g) have been prepared by the acid catalyzed condensation of 2-(diphenylphosphino)aniline with the corresponding aldehyde–ketone. Iminophosphine 2d can be reduced with sodium cyanoborohydride to give the corresponding amino-diphosphine 2-Ph₂PC₆H₄N(H)CH₂C₆H₄-2-PPh₂ (2h). In the presence of a stoichiometric quantity of acid, 2-(diphenylphosphino)aniline reacts in an unexpected manner with benzaldehyde, salicylaldehyde, or acetophenone to give the corresponding 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and with pyridine-2-carboxaldehyde to give N-(pyridin-2-ylmethyl)-2-diphenylphosphinoylaniline, the latter of which has been characterized by single-crystal X-ray crystallography, as its palladium dichloride derivative. The attempted condensation of 2-(diphenylphosphino)aniline with pyridine-2-carboxaldehyde to give the corresponding pyridine-functionalized iminophosphine resulted in an unusual transformation involving the diastereoselective addition of two equivalents of aldehyde to give 1,2-dipyridin-2-yl-2-(o-diphenylphosphinoyl)phenylamino-ethanol, which has been characterized by a single-crystal X-ray structure determination. The bidentate iminophosphine 2-Ph₂PC₆H₄N=C(H)Ph reacts with [(cycloocta-1,5-diene)PdClX] X=Cl, Me) to give [Pd{2-Ph₂PC₆H₄N=C(H)Ph}ClX] and the imino-diphosphine 2-Ph₂PC₆H₄N=C(H)C₆H₄-PPh₂ reacts with [(cycloocta-1,5-diene)PdClMe] to give [Pd{2-Ph₂PC₆H₄N=C(H)C₆H₄---PPh₂}ClMe] and each has been characterized by single-crystal X-ray crystallography. The monobasic iminophosphine 2-Ph₂PC₆H₄N=C(Me)CH₂C(O)Me reacts with [Ni(PPh₃)₂Cl₂] in the presence of NaH to give the phosphino–ketoiminate complex [Ni{2-Ph₂PC₆H₄N=C(Me)CHC(O)Me}Cl], which has been structurally characterized. Mixtures of iminophosphines 2a–h and a palladium source catalyze the Suzuki cross coupling of 4-bromoacetophenone with phenyl boronic acid. The efficiency of these catalysts show a marked dependence on the palladium source, catalysts formed from [Pd₂(OAc)₆] giving consistently higher conversions than those formed from [Pd₂(dba)₃] and [PdCl₂(MeCN)₂]. Catalysts formed from neutral bi- and terdentate iminophosphines 2a–d gave significantly higher conversions than those formed from their monobasic counterparts 2e–f. Notably, under our conditions the conversions obtained with 2a–c compare favorably with those of the standards; catalysts formed from tris(2-tolyl)phosphine and tris(2,4-di-tert-butylphenyl)phosphite and a source of palladium. In addition, mixtures of [Ir(COD)Cl]₂ and 2a–h are active for the hydrosilylation of acetophenone; in this case catalysts formed from monobasic iminophosphines 2e–f giving the highest conversions.     

Syntheses, crystal structures and spectroscopic properties of KEu[AsS4], K3Dy[AsS4]2 and Rb4Nd0.67[AsS4]2

Three rare earth compounds, KEu[AsS₄] (1), K₃Dy[AsS₄]₂ (2), and Rb₄Nd_0.67[AsS₄]₂ (3) have been synthesized employing the molten flux method. The reactions of A₂S₃ (A = K, Rb), Ln (Ln = Eu, Dy, Nd), As₂S₃, S were accomplished at 600 °C for 96 h in evacuated fused silica ampoules. Crystal data for these compounds are: 1, monoclinic, space group P2₁/m (no. 11), a = 6.7276(7) Å, b = 6.7190(5) Å, c = 8.6947(9) Å, β = 107.287(12)°, Z = 2; 2, monoclinic, space group C2/c (no. 15), a = 10.3381(7) Å, b = 18.7439(12) Å, c = 8.8185(6) Å, β = 117.060(7)°, Z = 4; 3, orthorhombic, space group Ibam (no. 72), a = 18.7333(15) Å, b = 9.1461(5) Å, c = 10.2060(6) Å, Z = 4. 1 is a two-dimensional structure with ²_∞[Eu(AsS₄)]⁻ layers separated by potassium cations. Within each layer, distorted bicapped trigonal [EuS₈] prisms are linked through distorted [AsS₄]³⁻ tetrahedra. Each Eu²⁺ cation is coordinated by two [AsS₄]³⁻ units by edge-sharing and bonded to further two [AsS₄]³⁻ units by corner-sharing. Compound 2 contains a one-dimensional structure with ¹_∞[Dy(AsS₄)₂]³⁻ chains separated by potassium cations. Within each chain, distorted bicapped trigonal prisms of [DyS₈] are linked by slightly distorted [AsS₄]³⁻ tetrahedra. Each Dy³⁺ ion is surrounded by four [AsS₄]³⁻ moieties in an edge-sharing fashion. For compound 3 also a one-dimensional structure with ¹_∞[Nd₀.₆₇(AsS₄)₂]⁴⁻ chains is observed. But the Nd position is only partially occupied and overall every third Nd atom is missing along the chain. This cuts the infinite chains into short dimers containing two bridging [As₄]³⁻ units and four terminal [AsS₄]³⁻ groups. 1 is characterized with UV/vis diffuse reflectance spectroscopy, IR, and Raman spectra.