Bioinspired Total Synthesis of Complex Nucleoside Antibiotics A201A,A201D and A201E

Herein, bioinspired total syntheses of A201A, A201D, and A201E based on a previously reported biosynthetic pathway are presented. The challenging 1,2-cis-furanoside, a core structure of the A201 family, was obtained by remote 2-quinolinecarbonyl-assisted glycosylation. We accomplished the total synthesis of A201A and A201E based on the critical 1,2-cis-furanoside moiety through late-stage glycosylation without any interference from basic dimethyl adenosine. We also confirmed the absolute configuration of A201E by total synthesis. This modular synthesis strategy enables efficient preparation of A201 family antibiotics, allowing the study of their structure–activity relationships and mode of action. This study satisfies the increasing demand for developing novel antibiotics inspired by the A201 family.     

Bioinspired Total Synthesis of Complex Nucleoside Antibiotics A201A,A201D and A201E

Herein, bioinspired total syntheses of A201A, A201D, and A201E based on a previously reported biosynthetic pathway are presented. The challenging 1,2-cis-furanoside, a core structure of the A201 family, was obtained by remote 2-quinolinecarbonyl-assisted glycosylation. We accomplished the total synthesis of A201A and A201E based on the critical 1,2-cis-furanoside moiety through late-stage glycosylation without any interference from basic dimethyl adenosine. We also confirmed the absolute configuration of A201E by total synthesis. This modular synthesis strategy enables efficient preparation of A201 family antibiotics, allowing the study of their structure–activity relationships and mode of action. This study satisfies the increasing demand for developing novel antibiotics inspired by the A201 family.     

A total synthesis of millingtonine A

A total synthesis of millingtonine A, a diglycosylated alkaloid, has been accomplished. Millingtonine A possesses a unique racemic tricyclic core structure not known from any other natural or synthetic source until now. The synthesis features a key bond-forming radical Ueno-Stork cyclization to form the heterocyclic core.     

The circular bacteriocins gassericin A and circularin A

Gassericin A, a bacteriocin produced by Lactobacillus gasseri LA39, shows antibacterial activity against a number of Gram-positive food-borne pathogenic bacteria. Circularin A produced by Clostridium beijerinckii ATCC25752 is active against C. tyrobutyricum, a known cheese-spoilage bacterium. Both bacteriocins were purified to homogeneity from culture supernatants by reverse-phase chromatography and the subsequently determined amino acid sequences were used to clone the bacteriocin structural genes. Mature gassericin A and circularin A are class V circular bacteriocins comprised of 58 and 69 amino acid residues, respectively. Both bacteriocins are resistant to several peptidases and proteases, as are other cyclic bacteriocins. Heterologous expression of gassericin A in Escherichia coli was used to produce a non-cyclic mature peptide, which was shown to have a specific activity 173-fold lower than the circular molecule. The minimal region for production and secretion of active circularin A is comprised of five genes, as was deduced by heterologous gene expression in Enterococcus faecalis. Gassericin A and circularin A have limited mutual similarity in their primary sequences. Unlike most bacteriocins, including gassericin A, circularin A has a three-amino-acid-leader sequence.     

A walk around the A3-coupling

In recent years, the transition-metal catalyzed three-component coupling of an aldehyde, an alkyne and an amine, commonly called A(3)-coupling, has been established as a convenient and general approach towards propargylamines. Furthermore, the A(3)-coupling has found a broad application as a key step in the construction of various nitrogen-containing heterocycles, biologically active compounds and natural products. Several interesting modifications of the A(3)-coupling as well as different tandem reactions involving A(3)-coupling have been developed. This tutorial review aims to highlight the current achievements in the field of A(3)-couplings and related transformations.     

Separation of gibberellin A4 from A4 and A7 mixture by selective complex

<正>Gibberellin A4 is effectively separated from mixture of gibberellin A4 and its analogue gibberellin A7,in the form of its crystalline complex with N,N,N',N'-tetramethylethylenediamine.After removing the tetramethylethylenediamine from the crystal by dilute HCl,gibberellin A4 is obtained a purity of 98.1%and a yield of 72.7%.     

A reductive cyclization approach to attenol A

A reductive cyclization strategy was applied to the synthesis of attenol A. This nontraditional approach to the spiroacetal structure illustrated several advantages of the reductive cyclization methodology. The attenol A core was formed in a carbon-carbon bond coupling that gave rise to a previously inaccessible spiroacetal epimer, a new method to synthesize thioketene acetals from a phenyl sulfone was realized, and the configurational stability of a nonanomeric spiroacetal was evaluated. A minor byproduct in the reductive cyclization reaction was identified that for the first time allowed direct evaluation of the stereoselectivity in a reductive cyclization of a dialkyloxy alkyllithium reagent.     

A total synthesis of mycalisine A

In this paper, we report a total synthesis of a naturally occurring pyrrolo[2,3-d]pyrimidine nucleoside, mycalisine A. Our synthetic strategy uses D-xylose as the startingmaterial and Vorbrüggen glycosylation as the key step. Mycalisine A was synthesized in 11 steps with a 15% overall yield.     

3D-pharmacophore models for selective A2A and A2B adenosine receptor antagonists

Three-dimensional pharmacophore models were generated for A2A and A2B adenosine receptors (ARs) based on highly selective A2A and A2B antagonists using the Catalyst program. The best pharmacophore model for selective A2A antagonists (Hypo-A2A) was obtained through a careful validation process. Four features contained in Hypo-A2A (one ring aromatic feature (R), one positively ionizable feature (P), one hydrogen bond acceptor lipid feature (L), and one hydrophobic feature (H)) seem to be essential for antagonists in terms of binding activity and A2A AR selectivity. The best pharmacophore model for selective A2B antagonists (Hypo-A2B) was elaborated by modifying the Catalyst common features (HipHop) hypotheses generated from the selective A2B antagonists training set. Hypo-A2B also consists of four features: one ring aromatic feature (R), one hydrophobic aliphatic feature (Z), and two hydrogen bond acceptor lipid features (L). All features play an important role in A2B AR binding affinity and are essential for A2B selectivity. Both A2A and A2B pharmacophore models have been validated toward a wide set of test molecules containing structurally diverse selective antagonists of all AR subtypes. They are capable of identifying correspondingly high potent antagonists and differentiating antagonists between subtypes. The results of our study will act as a valuable tool for retrieving structurally diverse compounds with desired biological activities and designing novel selective adenosine receptor ligands.     

A simple stereocontrolled synthesis of salinosporamide A

A simple and effective stereocontrolled synthesis of salinosporamide A has been developed. This process, the first synthesis of salinosporamide A, is capable of providing the compound in substantial quantities for further biological studies. Salinosporamide A was of special interest as a synthetic target because of its potent in vitro cytotoxic activity against many tumor cell lines (IC(50) values of 10 nM or less).     

Pre-resonance Raman studies of some mesogens-TB4A, TB7A and TB10A

Pre-resonance Raman spectra of certain liquid crystalline compounds, TB4A, TB7A and TB10A, are reported. The anomaly observed in the pre-resonance Raman spectra in the three compounds was initially explained by the Albrecht-Hutley Model, but its failure leads us to explain the anomalous intensity enhancement mechanism by invoking an interference effect between a weak dipole-forbidden excited state and a nearby strong electronic level via vibrational modes. The presence of a 2¹A_g dipole-forbidden excited state in TB4A and TB10A is deduced after an elaborate discussion of their centro-symmetric structure. The structural difference of TB7A in comparison with TB4A and TB10A is also discussed by taking their X-ray data into consideration.     

Pre-resonance Raman studies of some mesogens-TB4A,TB7A and TB10A

Pre-resonance Raman spectra of certain liquid crystalline compounds, TB4A, TB7A and TB10A, are reported. The anomaly observed in the pre-resonance Raman spectra in the three compounds was initially explained by the Albrecht-Hutley Model, but its failure leads us to explain the anomalous intensity enhancement mechanism by invoking an interference effect between a weak dipole-forbidden excited state and a nearby strong electronic level via vibrational modes. The presence of a 2¹A_g dipole-forbidden excited state in TB4A and TB10A is deduced after an elaborate discussion of their centro-symmetric structure. The structural difference of TB7A in comparison with TB4A and TB10A is also discussed by taking their X-ray data into consideration.     

Enantioselective syntheses of tremulenediol A and tremulenolide A

A concise entry to the skeleton of the tremulane sesquiterpenes is described that culminated in the first enantioselective syntheses of tremulenediol A and tremulenolide A. The approach features a series of efficient transition metal-catalyzed reactions commencing with an enantioselective rhodium(II)-catalyzed intramolecular cyclopropanation followed by a regioselective allylic alkylation and a diastereoselective rhodium(I)-catalyzed [5+2] cycloaddition.     

A concise total synthesis of salinosporamide A

A concise and straightforward 14-step total synthesis of (+/-)-salinosporamide A, based on a diastereoselective acid-catalysed intramolecular cyclisation of to the pyrrolidinone , and a regioselective reduction of the malonate derivative 8b to the aldehyde 9, is described.     

A total synthesis of phomactin A

A total synthesis of phomactin A (1) based on a Cr(II)/Ni(II) macrocyclisation from the aldehyde vinyl iodide 11, leading to 12, followed by elaboration of the epoxyketone 16, which then undergoes spontaneous pyran-hemiacetal formation on deprotection, is described.     

Triterpene glycosides from the sea cucumber Eupentacta fraudatrix. Structure and biological action of cucumariosides A1, A3, A4, A5, A6, A12 and A15, seven new minor non-sulfated tetraosides and unprecedented 25-keto, 27-norholostane aglycone

Seven new minor triterpene glycosides, cucumariosides A1 (1), A3 (2), A4 (3), A5 (4), A6 (5), A12 (6) and A15 (7) have been isolated from the Far Eastern sea cucumber Eupentacta fraudatrix. Structures of the glycosides were elucidated by 2D NMR spectroscopy and MS. Glycosides 1-7 belong to the group of cucumariosides A, having linear tetrasaccharide carbohydrate moieties without any sulfate group and possessing 3-O-methyl-D-xylose as a terminal monosaccharide unit. The latter peculiarity is rare in sea cucumber glycosides, but typical for the glycosides from E. fraudatrix. Glycosides 1-7 differ from each other by side chain structures in the aglycone moieties; three of them have unique structural features. The first is the presence of a 25-butoxy-group in the side chain of cucumarioside A3 (2), the second is a 23E,25-diene system in cucumarioside A6 (5) and the third is a 25-keto-27-nor-holostane aglycone in cucumarioside A12 (6); these were never previously found in sea cucumber glycosides. Cytotoxic activity of glycosides 1-7 against mouse spleen lymphocytes and the cells of the ascite form of mouse Ehrlich carcinoma, along with hemolytic activity against mouse erythrocytes and antifungal activity were studied. Glycosides 1 and 5 were the most active in all the tests.     

Total synthesis of mycalamide A and 7-epi-mycalamide A

[formula: see text] The final stages of a total synthesis of mycalamide A are described. A key step is the aldol reaction (mismatched) of imide 4 and aldehyde 5 which provided a ca. 5:4 mixture of aldols 10a and 10b, with incorrect C(7) stereochemistry. Elaboration of the 10a-10b mixture to mycalamide A required epimerization of C(7) at the stage of beta-keto imide 11. Alternatively, Swern oxidation of the 10a-10b mixture under conditions that minimize C(7) epimerization led to 7-epi-mycalamide A selectively.     

A symmetry-based formal synthesis of zaragozic acid A

A symmetry-based strategy for the synthesis of the zaragozic acids is reported. Two enantioselective dihydroxylations were used to establish the absolute configuration of a C(2) symmetric intermediate. Noteworthy transformations include a group-selective lactonization, which accomplished an end-differentiation of a pseudo-C(2) symmetric intermediate. Late stage protecting group adjustments and oxidations accomplished a formal synthesis of zaragozic acid A.     

A synthetic approach to kingianin A based on biosynthetic speculation

A synthetic approach towards the structurally complex dimer, kingianin A is reported. The strategy involved a cascade of complexity generating reactions, inspired through biosynthetic speculation. A concise protecting group free synthesis of the proposed monomeric precursor pre-kingianin A has been achieved using a tandem Stille cross-coupling reaction and electrocyclisation process. However, preliminary studies of the key dimerisation reaction have been conducted, which indicate that the process is not spontaneous, raising questions as to the origin of this complex natural product.     

A concise synthetic approach to the sorbicillactones: total synthesis of sorbicillactone A and 9-epi-sorbicillactone A

A concise (12 step) total synthesis of sorbicillactone A and 9-epi-sorbicillactone A is reported. Unlike typical routes to the sorbicillinoids, this strategy does not start from sorbicillin and allows for the production of the bicyclic core on a multigram scale. The intramolecular conjugate addition of a tethered malonate serves as an effective means of introducing the lactone ring and provides a synthetic handle for installing the amide nitrogen.