Ammoxidation of toluene on vanadyl polyphosphates-VO(PO3)2, 1. synthesis and characterization of the parent samples

Vanadyl polyphosphates with a P/V ratio=2 (crystalline α-VO(PO₃)₂ and β-VO(PO₃)₂ as well as amorphous VO(PO₃)₂) were synthesized, starting from usually prepared precursor VO(H₂PO₄)₂ but pursuing new methods using V₂O₅/H₃PO₄ as well as VOHPO₄·1/2 H₂O/H₃PO₄, too. The products were characterized by chemical analysis and X-ray diffractometry.In situ ESR spectroscopy was used as a tool to predict their catalytic activity in the ammoxidation reaction.     

Photochemical Reduction of Water to Hydrogen Catalyzed by Mixed-Valent Tetranuclear Platinum Complex

Abstract

Mixed-valent tetranuclear platinum complex, [Pt₄(NH₃)₈(C₄H₆NO)₄] ⁿ⁺ (n = 4, 5, 6, 8; C₄H₆NO = deprotonated α-pyrrolidone), is used as a homogeneous hydrogen-producing catalyst in a photochemical model system containing EDTA as an electron donor, Ru(bpy)₃ ²⁺ as a sensitizer and methylviologen (MV²⁺) as an electron relay.     

Seeking new metalloligands: Synthesis and reactivity of palladacycles with pyridine and pyrimidine rings

Treatment of the Schiff base ligands 4-(NC₅H₄)C₆H₄C(H)N[2′-(OH)C₆H₄] (a), 3,5-(N₂C₄H₃)C₆H₄C(H)N[2′-(OH)-C₆H₄] (b) and 3,5-(N₂C₄H₃)C₆H₄C(H) N[2′-(OH)-5′-^tBuC₆H₃] (c) with palladium (II) acetate in toluene gave the poly-nuclear cyclometallated complexes [Pd{4-(NC₅H₄)C₆H₃C(H)N[2′-(O)C₆H₄]}]₄ (1a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-C₆H₄]}]₄ (1b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃]}]₄ (1c) respectively, as air stable solids, with the ligand acting as a terdentate [C,N,O] moiety after deprotonation of the –OH group. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species [Pd{4-(NC₅H₄)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃)}(PPh₃)], (2c) in which the polynuclear structure has been cleaved and the coordination of the ligand has not changed [C,N,O]. When the cyclometallated complexes 1b and 1c were treated with the diphosphines Ph₂P(CH₂)₄PPh₂ (dppb), Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) and Ph₂P(CH₂)₂PPh₂ (t-dppe) in a 1:2 molar ratio the dinuclear cyclometallated complexes [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3c), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(η⁵-C₅H₄)Fe(η⁵-C₅H₄)PPh₂)], (4b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(η⁵C₅H₄)Fe(η⁵C₅H₄)P-Ph₂)], (4c) and [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CHCH)PPh₂)], (5c) were obtained as air stable solids.     

Gasförmige Acetate

Gaseous Acetates Thermoanalytical and mass-spectrometrical observations are undertaken with some acetates and oxiacetates. The volatilization of copper(I) acetate takes place like that of the silver acetate as M₂Ac₂⁺ (besides the deposition of Ag). On the volatilization of the anhydrous compounds Cu₂Ac₄, Cr₂Ac₄, Rh₂Ac₄, and Mo₂Ac₄ in the vacuum of a mass spectrometer is observed that Cu₂Ac₄ vaporizes dissociative as Cu₂Ac₂⁺ (+ 2 “Ac”), while the other compounds vaporize as M₂Ac₄⁺ and simultaneously is formed an oxidic (e.g. Cr₂O₄) or metallic residue. PdAc₂ vaporizes in the mass spectrometer as a trimeric molecule Pd₃Ac₆. M₄OAc₆, which is formed from the dihydrates, vaporizes in a mass spectrometer with M ? Co, Mn as M₄OAc₆⁺. Other complexes of the same type appear as Be₄OAc₅⁺, Mg₄OAc₅⁺, and Zn₄OAc₅⁺.     

Synthesis and Thermal Study of the Barium Complexes with 8-hydroxyquinolinate Derivatives

In this present work, barium ion was reacted with different ligands which are 5,7-dibromo 5,7-dichloro, 7-iodo and 5-chloro-7-iodo-8-hydroxyquinoline, in acetone/ammonium hydroxide medium under constant stirring and the obtained compounds were as follows: (I) Ba[(C₉ H₄ ONBr₂ )₂ ]⋅1.5H₂ O; (II) Ba[(C₉ H₄ ONCl₂ )(OH)]⋅1H₂ O; (III) Ba[(C₉ H₅ ONI)₂ ]⋅1H₂ O and (IV) Ba[(C₉ H₄ ONICl)₂ ]⋅5H₂ O, respectively. The compounds were characterized by elemental analysis, infrared absorption spectrum (IR), inductively coupled plasma spectrometry (ICP), simultaneous thermogravimetry-differential thermal analysis (TG-DTA) and differential scanning calorimeter (DSC). The final residue of the thermal decomposition was characterized as orthorhombic BaBr₂from (I); the intermediate residue, as a mixture of orthorhombic BaCO₃ and BaCl₂ and cubic BaO and the final residue, as a mixture of cubic and tetragonal BaO and orthorhombic BaCl₂ (II); the intermediate residue, as orthorhombic BaCO₃ and as a final residue, a mixture of cubic and tetragonal BaO from (III); and the intermediate residue, as a mixture of orthorhombic BaCO₃ and BaCl₂ and as a final residue, a mixture of cubic and tetragonal BaO and orthorhombic BaCl₂ from (IV). This revised version was published online in July 2006 with corrections to the Cover Date.     

Das Chloridnitrat PrCl2(NO3) · 5 H2O mit kationischen und anionischen Komplexen gemäß [PrCl2(H2O)6][PrCl2(NO3)2(H2O)4]

The Chloride Nitrate PrCl₂(NO₃) · 5 H₂O with Cationic and Anionic Complexes according to [PrCl₂(H₂O)₆][PrCl₂(NO₃)₂(H₂O)₄] Green single crystals of PrCl₂(NO₃) · 5 H₂O have been obtained from an aqueous solution of PrCl₃ and Pr(NO₃)₃. The crystal structure [monoclinic, P2/c, Z = 4, a = 1228.8(3), b = 648.4(1), c = 1266.0(4) pm, β = 91.91(3)°] contains cationic and anionic Pr³⁺ complexes according to [PrCl₂(H₂O)₆][PrCl₂(NO₃)₂(H₂O)₄]. Both nitrate groups of the anionic complex act as bidentate chelating ligands. Hydrogen bonds are observed with water molecules as donors and chlorine as well as oxygen atoms as acceptors.     

Resonance Raman spectrum of the complex [(C2H5)4N] AuBr4

A resonance Raman spectrum of the complex [(C₂H₅)₄N] AuBr₄ has been observed by use of 457.9 nm Ar⁺ excitation. Three progressions in the totally symmetric stretching fundamental ν₁ (a_1g) have been observed, viz. nν₁ (as far as n = 9), ν₂ + nν₁ (as far as n = 1), and ν₄ + nν₁ (as far as n = 6). The spectroscopic constants ω₁ and x₁₁ have been determined from an analysis of the nν₁ and ν₄ + nν₁ progressions.     

Coordination properties of trimeric porphyrin in acetic acid

Trimeric porphyrin H₆TP as well as its binuclear Cu₂H₂TP and trinuclear Cu₃TP copper complexes have been prepared. Kinetic features of H₆TP and Cu₂H₂TP complexes formation with copper(II) acetate in acetic acid as well as dissociation kinetics of Cu₂H₂TP and Cu₃TP in acetic acid medium in the presence of sulfuric acid have been studied.     

Selective Generation of Formamides through Photocatalytic CO2 Reduction Catalyzed by Ruthenium Carbonyl Compounds

The selective formation of dialkyl formamides through photochemical CO₂ reduction was developed as a means of utilizing CO₂ as a C₁ building block. Photochemical CO₂ reduction catalyzed by a [Ru(bpy)₂(CO)₂]²⁺ (bpy: 2,2′‐bipyridyl)/[Ru(bpy)₃]²⁺/Me₂NH/Me₂NH₂⁺ system in CH₃CN selectively produced dimethylformamide. In this process a ruthenium carbamoyl complex ([Ru(bpy)₂(CO)(CONMe₂)]⁺) formed by the nucleophilic attack of Me₂NH on [Ru(bpy)₂(CO)₂]²⁺ worked as the precursor to DMF. Thus Me₂NH acted as both the sacrificial electron donor and the substrate, while Me₂NH₂⁺ functioned as the proton source. Similar photochemical CO₂ reductions using R₂NH and R₂NH₂⁺ (R=Et, nPr, or nBu) also afforded the corresponding dialkyl formamides (R₂NCHO) together with HCOOH as a by‐product. The main product from the CO₂ reduction transitioned from R₂NCHO to HCOOH with increases in the alkyl chain length of the R₂NH. The selectivity between R₂NCHO and HCOOH was found to depend on the rate of [Ru(bpy)₂(CO)(CONR₂)]⁺ formation.     

Über Eigenschaften und Reaktivität von Aluminiumtrichlorid · Ethanthiol und Galliumtrichlorid · Ethanthiol

On Some Properties and the Reactivity of Trichloroaluminium · Ethanthiol and Trichlorogallium · Ethanthiol Complexes The synthesis of aluminiumtrichloride · ethanthiol as well as galliumtrichloride · ethanthiol is given. The reactions of these 1:1-adducts with the Lewis bases N(CH₃)₃. P(CH₃)₃, O(C₂H₅)₂ and S(CH₃)₂ and with the compounds (CH₃)₃SiSCH₃ and Pb(SCH₃)₂ are discussed, the reaction products are investigated. Spectra as well as some chemical and physical properties of the starting material and the products are reported.     

The catalytic transformation of nitrosobenzene into azoxy and azobenzene

Nitrosobenzene is converted into azoxybenzene in alcoholic media in the presence of Ru(CO)₃(PPh₃)₂ as catalyst and under an inert atmosphere; Fe(CO)₃(PPh₃)₂ and palladium complexes such as PdL₂Cl₂ (L  PhNO, p-MeC₆H₄NH₂, PPh₃) and Pd₃(CO)₃(PPh₃)₄, are less active as catalysts. Under CO pressure and with Ru(CO)₃(PPh₃)₂ as catalyst, nitrosobenzene is converted into azobenzene and aniline, while azoxybenzene gives azobenzene.     

Enhancing the electrochemical performance of Li1.2Ni0.2Mn0.6O2 by surface modification with nickel–manganese composite oxide

Li-rich layered Li_1.2Ni_0.2Mn_0.6O₂ has been surface modified by nickel–manganese composite oxide (Ni_0.5Mn_1.5O _x ) to serve as a novel cathode material with novel layered spinel structure for lithium-ion battery. The as-prepared Li_1.2Ni_0.2Mn_0.6O₂ before and after surface modification by Ni_0.5Mn_1.5O _x as well as simply blended Li_1.2Ni_0.2Mn_0.6O₂ with spinel LiNi_0.5Mn_1.5O₄, have been characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electronic microscopy, and differential scanning calorimetry. Electrochemical studies indicate that the Ni_0.5Mn_1.5O _x surface modified Li_1.2Ni_0.2Mn_0.6O₂ with peculiar layered spinel character dramatically represented increased discharge capacity, improved cycling stability as well as excellent rate capability at high-voltage even up to 5.0 V.     

Self-Assembly by Tridentate or Bidentate Ligand: Synthesis and Vapor Adsorption Properties of Cu(II), Zn(II), Hg(II) and Cd(II) Complexes Derived from a Bis(pyridylhydrazone) Compound

Four complexes, [Cu₄L₂(OCH₃)₂(CH₃OH)₂]·2H₂O (1), [Zn₂L₂Cl₄]·2H₂O·2CH₃OH (2), [Hg₂L₂Br₄]·4CH₃OH (3), and {[CdL₂Cl₂]·4H₂O·4CH₃OH}_n (4), have been synthesized and characterized from a bis(pyridylhydrazone) ligand (L) with copper(II), zinc(II), mercury(II) or cadmium(II), respectively. Complex 1 exists as a centrosymmetric tetranuclear dimer with L as deprotonated tridentate ligand. Complexes 2 and 3 exist as centrosymmetric metallamacrocycles with L as bidentate ligand. Complex 4 exists as a 1D looped-chain coordination polymer. The thermal stabilities and vapor adsorption properties of the four complexes were investigated as well.     

Solvent‐controlled Syntheses and Crystal Structures of a Pair of Novel Thiocyanate‐bridged Copper(II) Complexes Constructed from 4‐Bromo‐2‐(cyclopropyliminomethyl)phenolate

A pair of novel thiocyanate‐bridged polynuclear copper(II) complexes, [Cu₂(BCP)₂(NCS)₂]_n ( 1 ) and [Cu₂(BCP)₂(MeOH)(NCS)₂]₂ ( 2 ) [BCP = 4‐bromo‐2‐(cyclopropyliminomethyl)phenolate], have been obtained from an identical synthetic procedure and starting materials using solvents as the only independent variable. Complex 1 was synthesized and crystallized using EtOH as the solvent, while complex 2 was synthesized and crystallized using MeOH as the solvent. Both complexes show novel self‐assembled supramolecular structures in their crystals as elucidated by X‐ray analyses. The polymeric dinuclear complex 1 contains [Cu₂(BCP)₂(NCS)₂] units as the building blocks, crystallizes in the Pbca space group. The monomeric tetranuclear complex 2 contains [Cu₂(BCP)₂(MeOH)(NCS)₂] units as the building blocks, crystallizes in the P2₁/n space group.     

3D Uranyl Organic Frameworks Supported by Rigid Octadentate Carboxylate Ligand: Synthesis,Structure Diversity,and Luminescence Properties

Seven three dimensional (3D) uranyl organic frameworks (UOFs), formulated as [NH₄][(UO₂)₃(HTTDS)(H₂O)] ( 1 ), [(UO₂)₄(HTTDS)₂](HIM)₆ ( 2 , IM=imidazole), [(UO₂)₄(TTDS)(H₂O)₂(Phen)₂] ( 3 , Phen=1,10-phenanthroline), [Zn(H₂O)₄]_0.5[(UO₂)₃(HTTDS)(H₂O)₄] ( 4 ), and {(UO₂)₂[Zn(H₂O)₃]₂(TTDS)} ( 5 ), {Zn(UO₂)₂(H₂O)(Dib)_0.5(HDib)(HTTDS)} ( 6 , Dib=1,4-di(1H-imidazol-1-yl)benzene) and [Na]{(UO₂)₄[Cu₃(u₃-OH)(H₂O)₇](TTDS)₂} ( 7 ) have been hydrothermally prepared using a rigid octadentate carboxylate ligand, tetrakis(3,5-dicarboxyphenyl)silicon(H₈TTDS). These UOFs have different 3D self-assembled structures as a function of co-ligands, structure-directing agents and transition metals. The structure of 1 has an infinite ribbon formed by the UO₇ pentagonal bipyramid bridged by carboxylate groups. With further introduction of auxiliary N-donor ligands, different structure of 2 and 3 are formed, in 2 the imidazole serves as space filler, while in 3 the Phen are bound to [UO₂]²⁺ units as co-ligands. The second metal centers were introduced in the syntheses of 4–7 , and in all cases, they are part of the final structures, either as a counterion ( 4 ) or as a component of framework ( 5 − 7 ). Interesting, in 7 , a rare polyoxometalate [Cu₃(μ₃-OH)O₇(O₂CR)₄] cluster was found in the structure. It acts as an inorganic building unit together with the dimer [(UO₂)₂(O₂CR)₄] unit. Those uranyl carboxylates were sufficiently determined by single crystal X-ray diffraction, and their topological structures and luminescence properties were analyzed in detail.     

Solid-state reactions between alkali persulfates and oxides of corundum structure

The effects of three corundum structure oxides, α-Al₂O₃, α-Cr₂O₃, and α-Fe₂O₃, on the thermal decomposition of sodium and potassium peroxodisulfates (persulfates) under non-isothermal static air conditions and using various oxide/persulfate molar ratios, have been thermoanalytically investigated. Compounds such as Na₃Al(SO₄)₃, K₃Al(SO₄)₃, Cr₂(SO₄)₃, K₃Cr(SO₄₃, and Na₃Fe(SO₄)₃ are identified by X-ray diffractometry and conventional chemical analysis. The molar ratios as well as temperatures of the stoichiometric formation for these compounds have been established. At higher temperatures, α-Al₂O₃ acts as a promoter catalyst for the decomposition of pyrosulfate to sulfate, whereas α-Cr₂O₃ behaves as a retarder for the decomposition of persulfate. A eutectic mixture is formed between K₃Al(SO₄) and K₂SO₄ at 675°C. Also, K₃Fe(SO₄)₃ is identified as two crystalline phases.     

Preparation of Li4Ti5O12 Microspheres with a Pure Cr2O3 Coating Layer and its Effect for Lithium Storage

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

新型磁性荧光Fe3O4-CdSe纳米复合材料的制备

以1-十八烯作为高沸点溶剂, 在磁性粒子表面沉积量子点获得新型的磁性荧光Fe₃O₄-CdSe 纳米异质结构. 首先以乙酰丙酮铁(Fe(acac)₃)为前驱体, 二苯醚为溶剂, 油酸为表面活性剂和油胺(OAm)为表面活性剂兼还原剂, 通过溶剂热法制备单分散性的Fe₃O₄ 纳米粒子. 然后以1-十八烯为高沸点溶剂, CdO 为镉源,TOP-Se为硒源, 十六胺为表面活性剂以及硬脂酸为生长促进剂和成核剂制备得到新型的Fe₃O₄-CdSe纳米异质结构. 通过透射电镜(TEM), 傅里叶变换红外(FTIR)光谱, X射线衍射(XRD)谱, X射线光电子能谱(XPS)分析仪, 振动样品磁强计(VSM), 紫外-可见(UV-Vis)光谱和光致发光(PL)等手段对Fe₃O₄-CdSe 纳米复合材料的结构和性能进行表征. 结果表明, CdSe纳米粒子成功地吸附在Fe₃O₄纳米粒子表面, 并沿着c轴生长, 形成了宽3.6 nm, 长分别为14.5 和32.5 nm的新型枣核状和钉子状的异质结构体. 这种新型的Fe₃O₄-CdSe纳米复合材料是由磁铁矿Fe₃O₄和六方形的CdSe棒状结构组成, 具有较好的荧光性能和超顺磁性. 随着CdSe棒长度的增加, 荧光吸收峰向长波方向移动. Fe₃O₄纳米粒子, 枣核状和钉子状的Fe₃O₄-CdSe纳米复合材料的饱和磁化强度分别是57.80, 40.76和31.10 emu·g^-1.     

Anion‐controlled Syntheses and Crystal Structures of a Pair of Novel Azide‐bridged Copper(II) Complexes Constructed from 4‐Chloro‐2‐[(2‐dimethylaminoethylimino)methyl]phenol

A pair of novel azide‐bridged polynuclear copper(II) complexes, [CuL(μ_1,1‐N₃)]_n ( 1 ) and [Cu₄L₂(CH₃COO)₂(μ_1,1‐N₃)₄] ( 2 ) (L = 4‐chloro‐2‐[(2‐dimethylaminoethylimino)methyl]phenolate), have been obtained from the same Schiff base ligand and an identical synthetic procedure using anions of the metal salts as the only independent variable. Complex 1 was synthesized using copper(II) nitrate, while complex 2 was synthesized using the copper(II) acetate as the salt. Both of the complexes show novel supramolecular structures in their crystals as elucidated by X‐ray analyses. The polynuclear complex 1 contains [CuL(μ_1,1‐N₃)]_n units as the building blocks, crystallizes in the Pbca space group. The tetra‐nuclear complex 2 contains [Cu₄L₂(CH₃COO)₂(μ_1,1‐N₃)₄] units as the building blocks, crystallizes in the space group.     

Thiosemicarbazone complexes of the platinum metals. A story of variable coordination modes

Salicylaldehyde thiosemicarbazone (H₂saltsc) reacts with [M(PPh₃)₃X₂] (M = Ru, Os; X = Cl, Br) to afford complexes of type [M(PPh₃)₂(Hsaltsc)₂], in which the salicylaldehyde thiosemicarbazone ligand is coordinated to the metal as a bidentate N,S-donor forming a four-membered chelate ring. Reaction of benzaldehyde thiosemicarbazones (Hbztsc-R) with [M(PPh₃)₃X₂] also affords complexes of similar type, viz. [M(PPh₃)₂(bztsc-R)₂], in which the benzaldehyde thiosemicarbazones have also been found to coordinate the metal as a bidentate N,S-donor forming a four-membered chelate ring as before. Reaction of the Hbztsc-R ligands has also been carried out with [M(bpy)₂X₂] (M = Ru, Os; X = Cl, Br), which has afforded complexes of type [M(bpy)₂(bztsc-R)]⁺, which have been isolated as perchlorate salts. Coordination mode of bztsc-R has been found to be the same as before. Structure of the Hbztsc-OMe ligand has been determined and some molecular modelling studies have been carried out determine the reason for the observed mode of coordination. Reaction of acetone thiosemicarbazone (Hactsc) has then been carried out with [M(bpy)₂X₂] to afford the [M(bpy)₂(actsc)]ClO₄ complexes, in which the actsc ligand coordinates the metal as a bidentate N,S-donorformingafive-membered chelate ring. Reaction of H₂saltsc has been carried out with [Ru(bpy)₂Cl₂] to prepare the [Ru(bpy)₂(Hsaltsc)]ClO₄ complex, which has then been reacted with one equivalent of nickel perchlorate to afford an octanuclear complex of type [Ru(bpy)₂(saltsc-H)₄Ni₄](ClO₄)₄.